[PATCH] 2.5.7-pre2 IDE 22a

- Apply more patches from Vojtech Pavlik for the handling of host chip setup.
   Hopefully they are settled now.

- Kill unused CONFIG_BLK_DEV_MODES

- Push register addressing down in to task_vlb_sync.

- Make the taskfile parsing stuff actually readable. This is compressing the
   code by an incredible amount. We use just one function doing the whole
   scanning right now. This should make sure that the IRQ handler used by a
   particular command is always right.  I didn't introduce typos hopefully
   here.

- Don't call ide_handler_parser as argument for do_taskfile() any longer. We
   have killed this function by coalescing it's functionality with
   ide_cmd_type_parser() anyway.

- Kill unused SLC90E66 code, which Vojtech apparently missed in his patch.

- sync up with 2.5.7-pre2

Once again the actual patch is rather big mostly due to the removal of
some default configuration variables which are not used anylonger. So time for
the next patch stage.

arch/alpha/config.in

@@ -290,7 +290,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
 if [ "$CONFIG_IDE" != "n" ]; then
   source drivers/ide/Config.in
 else
-  define_bool CONFIG_BLK_DEV_IDE_MODES n
   define_bool CONFIG_BLK_DEV_HD n
 fi
 endmenu

arch/alpha/defconfig

@@ -274,7 +274,6 @@ CONFIG_BLK_DEV_CY82C693=y
 # CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_IDE_CHIPSETS is not set

arch/arm/config.in

@@ -564,7 +564,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
 if [ "$CONFIG_IDE" != "n" ]; then
   source drivers/ide/Config.in
 else
-  define_bool CONFIG_BLK_DEV_IDE_MODES n
   define_bool CONFIG_BLK_DEV_HD n
 fi
 endmenu

arch/arm/def-configs/footbridge

@@ -429,7 +429,6 @@ CONFIG_BLK_DEV_PDC202XX=y
 # CONFIG_PDC202XX_BURST is not set
 # CONFIG_BLK_DEV_OSB4 is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 CONFIG_BLK_DEV_SL82C105=y

arch/arm/def-configs/iq80310

@@ -478,7 +478,6 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_SL82C105 is not set

arch/cris/config.in

@@ -149,7 +149,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
 if [ "$CONFIG_IDE" != "n" ]; then
   source drivers/ide/Config.in
 else
-  define_bool CONFIG_BLK_DEV_IDE_MODES n
   define_bool CONFIG_BLK_DEV_HD n
 fi
 endmenu

arch/i386/config.in

@@ -305,7 +305,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
 if [ "$CONFIG_IDE" != "n" ]; then
    source drivers/ide/Config.in
 else
-   define_bool CONFIG_BLK_DEV_IDE_MODES n
    define_bool CONFIG_BLK_DEV_HD n
 fi
 endmenu

arch/i386/defconfig

@@ -285,7 +285,6 @@ CONFIG_PIIX_TUNING=y
 # CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_IDE_CHIPSETS is not set

arch/ia64/config.in

@@ -131,7 +131,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
 if [ "$CONFIG_IDE" != "n" ]; then
   source drivers/ide/Config.in
 else
-  define_bool CONFIG_BLK_DEV_IDE_MODES n
   define_bool CONFIG_BLK_DEV_HD n
 fi
 endmenu

arch/ia64/defconfig

@@ -248,7 +248,6 @@ CONFIG_BLK_DEV_PIIX=y
 # CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_IDE_CHIPSETS is not set

arch/ia64/sn/configs/sn1/defconfig-bigsur-mp

@@ -235,7 +235,6 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_IDE_CHIPSETS is not set

arch/ia64/sn/configs/sn1/defconfig-bigsur-sp

@@ -235,7 +235,6 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_IDE_CHIPSETS is not set

arch/m68k/config.in

@@ -161,7 +161,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
 if [ "$CONFIG_IDE" != "n" ]; then
   source drivers/ide/Config.in
 else
-  define_bool CONFIG_BLK_DEV_IDE_MODES n
   define_bool CONFIG_BLK_DEV_HD n
 fi
 endmenu

arch/mips/config.in

@@ -350,7 +350,6 @@ if [ "$CONFIG_SGI_IP22" != "y" -a \
    if [ "$CONFIG_IDE" != "n" ]; then
       source drivers/ide/Config.in
    else
-      define_bool CONFIG_BLK_DEV_IDE_MODES n
       define_bool CONFIG_BLK_DEV_HD n
    fi
    endmenu

arch/mips/defconfig-ddb5476

@@ -248,7 +248,6 @@ CONFIG_BLK_DEV_IDEPCI=y
 # CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_IDE_CHIPSETS is not set

arch/mips/defconfig-it8172

@@ -317,7 +317,6 @@ CONFIG_IT8172_TUNING=y
 # CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 CONFIG_IDE_CHIPSETS=y

arch/mips64/config.in

@@ -147,7 +147,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
 if [ "$CONFIG_IDE" != "n" ]; then
   source drivers/ide/Config.in
 else
-  define_bool CONFIG_BLK_DEV_IDE_MODES n
   define_bool CONFIG_BLK_DEV_HD n
 fi
 endmenu

arch/ppc/config.in

@@ -425,7 +425,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
 if [ "$CONFIG_IDE" != "n" ]; then
   source drivers/ide/Config.in
 else
-  define_bool CONFIG_BLK_DEV_IDE_MODES n
   define_bool CONFIG_BLK_DEV_HD n
 fi
 endmenu

arch/ppc/configs/common_defconfig

@@ -276,7 +276,6 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 CONFIG_BLK_DEV_SL82C105=y

arch/ppc/configs/k2_defconfig

@@ -259,7 +259,6 @@ CONFIG_BLK_DEV_ALI15X3=y
 # CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_SL82C105 is not set

arch/ppc/configs/menf1_defconfig

@@ -263,7 +263,6 @@ CONFIG_BLK_DEV_IDEPCI=y
 # CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_SL82C105 is not set

arch/ppc/configs/mvme5100_defconfig

@@ -256,7 +256,6 @@ CONFIG_BLK_DEV_IDEPCI=y
 # CONFIG_PDC202XX_BURST is not set
 # CONFIG_BLK_DEV_OSB4 is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_SL82C105 is not set

arch/ppc/configs/pmac_defconfig

@@ -266,7 +266,6 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 CONFIG_BLK_DEV_SL82C105=y

arch/ppc/configs/pplus_defconfig

@@ -270,7 +270,6 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
 CONFIG_BLK_DEV_SL82C105=y

arch/ppc/configs/sandpoint_defconfig

@@ -233,7 +233,6 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 CONFIG_BLK_DEV_SL82C105=y

arch/ppc/defconfig

@@ -276,7 +276,6 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 CONFIG_BLK_DEV_SL82C105=y

arch/ppc64/config.in

@@ -92,7 +92,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
 if [ "$CONFIG_IDE" != "n" ]; then
   source drivers/ide/Config.in
 else
-  define_bool CONFIG_BLK_DEV_IDE_MODES n
   define_bool CONFIG_BLK_DEV_HD n
 fi
 endmenu

arch/sh/config.in

@@ -218,7 +218,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
 if [ "$CONFIG_IDE" != "n" ]; then
   source drivers/ide/Config.in
 else
-  define_bool CONFIG_BLK_DEV_IDE_MODES n
   define_bool CONFIG_BLK_DEV_HD n
 fi
 endmenu

arch/sparc/config.in

@@ -110,14 +110,11 @@ if [ "$CONFIG_PCI" = "y" ]; then
   if [ "$CONFIG_IDE" != "n" ]; then
     source drivers/ide/Config.in
   else
-    define_bool CONFIG_BLK_DEV_IDE_MODES n
     define_bool CONFIG_BLK_DEV_HD n
   fi
   endmenu
 else
-
   define_bool CONFIG_IDE n
-  define_bool CONFIG_BLK_DEV_IDE_MODES n
   define_bool CONFIG_BLK_DEV_HD n
 fi
 

arch/sparc64/config.in

@@ -112,7 +112,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
 if [ "$CONFIG_IDE" != "n" ]; then
   source drivers/ide/Config.in
 else
-  define_bool CONFIG_BLK_DEV_IDE_MODES n
   define_bool CONFIG_BLK_DEV_HD n
 fi
 endmenu

arch/sparc64/defconfig

@@ -311,7 +311,6 @@ CONFIG_BLK_DEV_NS87415=y
 # CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_IDE_CHIPSETS is not set

arch/x86_64/config.in

@@ -122,7 +122,6 @@ tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
 if [ "$CONFIG_IDE" != "n" ]; then
   source drivers/ide/Config.in
 else
-  define_bool CONFIG_BLK_DEV_IDE_MODES n
   define_bool CONFIG_BLK_DEV_HD n
 fi
 endmenu

drivers/ide/Config.help

@@ -352,19 +352,10 @@ CONFIG_WDC_ALI15X3
   SAY N!
 
 CONFIG_BLK_DEV_AMD74XX
-  This driver ensures (U)DMA support for the AMD756/760 Viper
-  chipsets.
-
-  If you say Y here, you also need to say Y to "Use DMA by default
-  when available", above.
-  Please read the comments at the top of <file:drivers/ide/amd74xx.c>.
-
-  If unsure, say N.
-
-CONFIG_AMD74XX_OVERRIDE
-  This option auto-forces the ata66 flag.
-  This effect can be also invoked by calling "idex=ata66"
-  If unsure, say N.
+  This driver adds explicit support for AMD-7xx and AMD-8111 chips
+  and also for the nVidia nForce chip.  This allows the kernel to
+  change PIO, DMA and UDMA speeds and to configure the chip to
+  optimum performance.
 
 CONFIG_BLK_DEV_CMD64X
   Say Y here if you have an IDE controller which uses any of these
@@ -435,28 +426,10 @@ CONFIG_BLK_DEV_SVWKS
   chipsets.
 
 CONFIG_BLK_DEV_PIIX
-  This driver adds PIO mode setting and tuning for all PIIX IDE
-  controllers by Intel.  Since the BIOS can sometimes improperly tune
-  PIO 0-4 mode settings, this allows dynamic tuning of the chipset
-  via the standard end-user tool 'hdparm'.
-
-  Please read the comments at the top of <file:drivers/ide/piix.c>.
-
-  If you say Y here, you should also say Y to "PIIXn Tuning support",
-  below.
-
-  If unsure, say N.
-
-CONFIG_PIIX_TUNING
-  This driver extension adds DMA mode setting and tuning for all PIIX
-  IDE controllers by Intel. Since the BIOS can sometimes improperly
-  set up the device/adapter combination and speed limits, it has
-  become a necessity to back/forward speed devices as needed.
-
-  Case 430HX/440FX PIIX3 need speed limits to reduce UDMA to DMA mode
-  2 if the BIOS can not perform this task at initialization.
-
-  If unsure, say N.
+  This driver adds explicit support for Intel PIIX and ICH chips
+  and also for the Efar Victory66 (slc90e66) chip.  This allows
+  the kernel to change PIO, DMA and UDMA speeds and to configure
+  the chip to optimum performance.
 
 CONFIG_BLK_DEV_PDC202XX
   Promise Ultra33 or PDC20246
@@ -513,19 +486,6 @@ CONFIG_BLK_DEV_SIS5513
 
   Please read the comments at the top of <file:drivers/ide/sis5513.c>.
 
-CONFIG_BLK_DEV_SLC90E66
-  This driver ensures (U)DMA support for Victroy66 SouthBridges for
-  SMsC with Intel NorthBridges.  This is an Ultra66 based chipset.
-  The nice thing about it is that you can mix Ultra/DMA/PIO devices
-  and it will handle timing cycles.  Since this is an improved
-  look-a-like to the PIIX4 it should be a nice addition.
-
-  If you say Y here, you need to say Y to "Use DMA by default when
-  available" as well.
-
-  Please read the comments at the top of
-  <file:drivers/ide/slc90e66.c>.
-
 CONFIG_BLK_DEV_SL82C105
   If you have a Winbond SL82c105 IDE controller, say Y here to enable
   special configuration for this chip. This is common on various CHRP
@@ -538,20 +498,9 @@ CONFIG_BLK_DEV_TRM290
   Please read the comments at the top of <file:drivers/ide/trm290.c>.
 
 CONFIG_BLK_DEV_VIA82CXXX
-  This allows you to configure your chipset for a better use while
-  running PIO/(U)DMA, it will allow you to enable efficiently the
-  second channel dma usage, as it may not be set by BIOS.  It will try
-  to set fifo configuration at its best.  It will allow you to get
-  information from /proc/ide/via provided you enabled "/proc file
-  system" support.
-
-  Please read the comments at the top of
-  <file:drivers/ide/via82cxxx.c>.
-
-  If you say Y here, then say Y to "Use DMA by default when available"
-  as well.
-
-  If unsure, say N.
+  This driver adds explicit support for VIA BusMastering IDE chips.
+  This allows the kernel to change PIO, DMA and UDMA speeds and to
+  configure the chip to optimum performance.
 
 CONFIG_BLK_DEV_IDE_RAPIDE
   Say Y here if you want to support the Yellowstone RapIDE controller

drivers/ide/Config.in

@@ -53,18 +53,14 @@ if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
 	 dep_mbool '      AEC62XX Tuning support' CONFIG_AEC62XX_TUNING $CONFIG_BLK_DEV_AEC62XX
 	 dep_bool '    ALI M15x3 chipset support' CONFIG_BLK_DEV_ALI15X3 $CONFIG_BLK_DEV_IDEDMA_PCI
 	 dep_mbool '      ALI M15x3 WDC support (DANGEROUS)' CONFIG_WDC_ALI15X3 $CONFIG_BLK_DEV_ALI15X3
-	 dep_bool '    AMD Viper support' CONFIG_BLK_DEV_AMD74XX $CONFIG_BLK_DEV_IDEDMA_PCI
-	 dep_mbool '      AMD Viper ATA-66 Override (WIP)' CONFIG_AMD74XX_OVERRIDE $CONFIG_BLK_DEV_AMD74XX $CONFIG_IDEDMA_PCI_WIP
+	 dep_bool '    AMD and nVidia chipset support' CONFIG_BLK_DEV_AMD74XX $CONFIG_BLK_DEV_IDEDMA_PCI
 	 dep_bool '    CMD64X chipset support' CONFIG_BLK_DEV_CMD64X $CONFIG_BLK_DEV_IDEDMA_PCI
 	 dep_bool '    CY82C693 chipset support' CONFIG_BLK_DEV_CY82C693 $CONFIG_BLK_DEV_IDEDMA_PCI
 	 dep_bool '    Cyrix CS5530 MediaGX chipset support' CONFIG_BLK_DEV_CS5530 $CONFIG_BLK_DEV_IDEDMA_PCI
   	 dep_bool '    HPT34X chipset support' CONFIG_BLK_DEV_HPT34X $CONFIG_BLK_DEV_IDEDMA_PCI
 	 dep_mbool '      HPT34X AUTODMA support (WIP)' CONFIG_HPT34X_AUTODMA $CONFIG_BLK_DEV_HPT34X $CONFIG_IDEDMA_PCI_WIP
 	 dep_bool '    HPT366 chipset support' CONFIG_BLK_DEV_HPT366 $CONFIG_BLK_DEV_IDEDMA_PCI
-	 if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then
-	    dep_mbool '    Intel PIIXn chipsets support' CONFIG_BLK_DEV_PIIX $CONFIG_BLK_DEV_IDEDMA_PCI
-	    dep_mbool '      PIIXn Tuning support' CONFIG_PIIX_TUNING $CONFIG_BLK_DEV_PIIX $CONFIG_IDEDMA_PCI_AUTO
-	 fi
+	 dep_bool '    Intel and Efar (SMsC) chipset support' CONFIG_BLK_DEV_PIIX $CONFIG_BLK_DEV_IDEDMA_PCI
 	 if [ "$CONFIG_MIPS_ITE8172" = "y" -o "$CONFIG_MIPS_IVR" = "y" ]; then
 	    dep_mbool '    IT8172 IDE support' CONFIG_BLK_DEV_IT8172 $CONFIG_BLK_DEV_IDEDMA_PCI
 	    dep_mbool '      IT8172 IDE Tuning support' CONFIG_IT8172_TUNING $CONFIG_BLK_DEV_IT8172 $CONFIG_IDEDMA_PCI_AUTO
@@ -77,9 +73,8 @@ if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
 	 dep_bool '      Special FastTrak Feature' CONFIG_PDC202XX_FORCE $CONFIG_BLK_DEV_PDC202XX
 	 dep_bool '    ServerWorks OSB4/CSB5 chipsets support' CONFIG_BLK_DEV_SVWKS $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
 	 dep_bool '    SiS5513 chipset support' CONFIG_BLK_DEV_SIS5513 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
-	 dep_bool '    SLC90E66 chipset support' CONFIG_BLK_DEV_SLC90E66 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
 	 dep_bool '    Tekram TRM290 chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_TRM290 $CONFIG_BLK_DEV_IDEDMA_PCI
-	 dep_bool '    VIA82CXXX chipset support' CONFIG_BLK_DEV_VIA82CXXX $CONFIG_BLK_DEV_IDEDMA_PCI
+	 dep_bool '    VIA chipset support' CONFIG_BLK_DEV_VIA82CXXX $CONFIG_BLK_DEV_IDEDMA_PCI
       fi
 
       if [ "$CONFIG_PPC" = "y" -o "$CONFIG_ARM" = "y" ]; then
@@ -167,32 +162,6 @@ else
   define_bool CONFIG_DMA_NONPCI n
 fi
 
-if [ "$CONFIG_IDE_CHIPSETS" = "y" -o \
-     "$CONFIG_BLK_DEV_AEC62XX" = "y" -o \
-     "$CONFIG_BLK_DEV_ALI15X3" = "y" -o \
-     "$CONFIG_BLK_DEV_AMD74XX" = "y" -o \
-     "$CONFIG_BLK_DEV_CMD640" = "y" -o \
-     "$CONFIG_BLK_DEV_CMD64X" = "y" -o \
-     "$CONFIG_BLK_DEV_CS5530" = "y" -o \
-     "$CONFIG_BLK_DEV_CY82C693" = "y" -o \
-     "$CONFIG_BLK_DEV_HPT34X" = "y" -o \
-     "$CONFIG_BLK_DEV_HPT366" = "y" -o \
-     "$CONFIG_BLK_DEV_IDE_PMAC" = "y" -o \
-     "$CONFIG_BLK_DEV_OPTI621" = "y" -o \
-     "$CONFIG_BLK_DEV_SVWKS" = "y" -o \
-     "$CONFIG_BLK_DEV_PDC202XX" = "y" -o \
-     "$CONFIG_BLK_DEV_PIIX" = "y" -o \
-     "$CONFIG_BLK_DEV_IT8172" = "y" -o \
-     "$CONFIG_BLK_DEV_SIS5513" = "y" -o \
-     "$CONFIG_BLK_DEV_SLC90E66" = "y" -o \
-     "$CONFIG_BLK_DEV_SL82C105" = "y" -o \
-     "$CONFIG_BLK_DEV_VIA82CXXX" = "y" -o \
-     "$CONFIG_BLK_DEV_MPC8xx_IDE" = "y" ]; then
-   define_bool CONFIG_BLK_DEV_IDE_MODES y
-else
-   define_bool CONFIG_BLK_DEV_IDE_MODES n
-fi
-
 dep_tristate 'Support for IDE Raid controllers' CONFIG_BLK_DEV_ATARAID $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL
 dep_tristate '   Support Promise software RAID (Fasttrak(tm))' CONFIG_BLK_DEV_ATARAID_PDC $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL $CONFIG_BLK_DEV_ATARAID
 dep_tristate '   Highpoint 370 software RAID' CONFIG_BLK_DEV_ATARAID_HPT $CONFIG_BLK_DEV_IDE $CONFIG_EXPERIMENTAL $CONFIG_BLK_DEV_ATARAID

drivers/ide/Makefile

@@ -60,7 +60,6 @@ ide-obj-$(CONFIG_BLK_DEV_QD65XX)	+= qd65xx.o
 ide-obj-$(CONFIG_BLK_DEV_IDE_RAPIDE)	+= rapide.o
 ide-obj-$(CONFIG_BLK_DEV_RZ1000)	+= rz1000.o
 ide-obj-$(CONFIG_BLK_DEV_SIS5513)	+= sis5513.o
-ide-obj-$(CONFIG_BLK_DEV_SLC90E66)	+= slc90e66.o
 ide-obj-$(CONFIG_BLK_DEV_SL82C105)	+= sl82c105.o
 ide-obj-$(CONFIG_BLK_DEV_TRM290)	+= trm290.o
 ide-obj-$(CONFIG_BLK_DEV_UMC8672)	+= umc8672.o

drivers/ide/amd74xx.c

 /*
- * $Id: amd74xx.c,v 2.7 2002/09/01 17:37:00 vojtech Exp $
+ * $Id: amd74xx.c,v 2.8 2002/03/14 11:52:20 vojtech Exp $
  *
  *  Copyright (c) 2000-2002 Vojtech Pavlik
  *
@@ -46,13 +46,13 @@
 
 #include "ata-timing.h"
 
-#define AMD_IDE_ENABLE		0x40
-#define AMD_IDE_CONFIG		0x41
-#define AMD_CABLE_DETECT	0x42
-#define AMD_DRIVE_TIMING	0x48
-#define AMD_8BIT_TIMING		0x4e
-#define AMD_ADDRESS_SETUP	0x4c
-#define AMD_UDMA_TIMING		0x50
+#define AMD_IDE_ENABLE		(0x00 + amd_config->base)
+#define AMD_IDE_CONFIG		(0x01 + amd_config->base)
+#define AMD_CABLE_DETECT	(0x02 + amd_config->base)
+#define AMD_DRIVE_TIMING	(0x08 + amd_config->base)
+#define AMD_8BIT_TIMING		(0x0e + amd_config->base)
+#define AMD_ADDRESS_SETUP	(0x0c + amd_config->base)
+#define AMD_UDMA_TIMING		(0x10 + amd_config->base)
 
 #define AMD_UDMA		0x07
 #define AMD_UDMA_33		0x01
@@ -66,18 +66,19 @@
  */
 
 static struct amd_ide_chip {
-	char *name;
 	unsigned short id;
 	unsigned char rev;
+	unsigned int base;
 	unsigned char flags;
 } amd_ide_chips[] = {
-	{ "8111",		PCI_DEVICE_ID_AMD_8111_IDE,  0x00, AMD_UDMA_100 },
-	{ "768 Opus",		PCI_DEVICE_ID_AMD_OPUS_7441, 0x00, AMD_UDMA_100 },
-	{ "766 Viper",		PCI_DEVICE_ID_AMD_VIPER_7411, 0x00, AMD_UDMA_100 | AMD_BAD_FIFO },
-	{ "756/c4+ Viper",	PCI_DEVICE_ID_AMD_VIPER_7409, 0x07, AMD_UDMA_66 },
-	{ "756 Viper",		PCI_DEVICE_ID_AMD_VIPER_7409, 0x00, AMD_UDMA_66 | AMD_BAD_SWDMA },
-	{ "755 Cobra",		PCI_DEVICE_ID_AMD_COBRA_7401, 0x00, AMD_UDMA_33 | AMD_BAD_SWDMA },
-	{ NULL }
+	{ PCI_DEVICE_ID_AMD_8111_IDE,  0x00, 0x40, AMD_UDMA_100 },			/* AMD-8111 */
+	{ PCI_DEVICE_ID_AMD_OPUS_7441, 0x00, 0x40, AMD_UDMA_100 },			/* AMD-768 Opus */
+	{ PCI_DEVICE_ID_AMD_VIPER_7411, 0x00, 0x40, AMD_UDMA_100 | AMD_BAD_FIFO },	/* AMD-766 Viper */
+	{ PCI_DEVICE_ID_AMD_VIPER_7409, 0x07, 0x40, AMD_UDMA_66 },			/* AMD-756/c4+ Viper */
+	{ PCI_DEVICE_ID_AMD_VIPER_7409, 0x00, 0x40, AMD_UDMA_66 | AMD_BAD_SWDMA },	/* AMD-756 Viper */
+	{ PCI_DEVICE_ID_AMD_COBRA_7401, 0x00, 0x40, AMD_UDMA_33 | AMD_BAD_SWDMA },	/* AMD-755 Cobra */
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, 0x00, 0x50, AMD_UDMA_100 },			/* nVidia nForce */
+	{ 0 }
 };
 
 static struct amd_ide_chip *amd_config;
@@ -119,8 +120,8 @@ static int amd_get_info(char *buffer, char **addr, off_t offset, int count)
 
 	amd_print("----------AMD BusMastering IDE Configuration----------------");
 
-	amd_print("Driver Version:                     2.7");
-	amd_print("South Bridge:                       AMD-%s", amd_config->name);
+	amd_print("Driver Version:                     2.8");
+	amd_print("South Bridge:                       %s", bmide_dev->name);
 
 	pci_read_config_byte(dev, PCI_REVISION_ID, &t);
 	amd_print("Revision:                           IDE %#x", t);
@@ -389,8 +390,8 @@ unsigned int __init pci_init_amd74xx(struct pci_dev *dev, const char *name)
  */
 
 	pci_read_config_byte(dev, PCI_REVISION_ID, &t);
-	printk(KERN_INFO "AMD_IDE: AMD-%s (rev %02x) IDE %s controller on pci%s\n",
-		amd_config->name, t, amd_dma[amd_config->flags & AMD_UDMA], dev->slot_name);
+	printk(KERN_INFO "AMD_IDE: %s (rev %02x) %s controller on pci%s\n",
+		dev->name, t, amd_dma[amd_config->flags & AMD_UDMA], dev->slot_name);
 
 /*
  * Register /proc/ide/amd74xx entry

drivers/ide/ide-disk.c

@@ -106,40 +106,51 @@ static int lba_capacity_is_ok (struct hd_driveid *id)
 	return 0;	/* lba_capacity value may be bad */
 }
 
-static ide_startstop_t chs_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long block);
-static ide_startstop_t lba_28_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long block);
-static ide_startstop_t lba_48_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long long block);
+static ide_startstop_t chs_do_request(ide_drive_t *drive, struct request *rq, unsigned long block);
+static ide_startstop_t lba28_do_request(ide_drive_t *drive, struct request *rq, unsigned long block);
+static ide_startstop_t lba48_do_request(ide_drive_t *drive, struct request *rq, unsigned long long block);
 
 /*
- * do_rw_disk() issues READ and WRITE commands to a disk,
- * using LBA if supported, or CHS otherwise, to address sectors.
- * It also takes care of issuing special DRIVE_CMDs.
+ * Issue a READ or WRITE command to a disk, using LBA if supported, or CHS
+ * otherwise, to address sectors.  It also takes care of issuing special
+ * DRIVE_CMDs.
  */
-static ide_startstop_t do_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long block)
+static ide_startstop_t idedisk_do_request(ide_drive_t *drive, struct request *rq, unsigned long block)
 {
-	if (drive->blocked)
-		panic("ide: Request while drive blocked? You don't like your data intact?");
+	/*
+	 * Wait until all request have bin finished.
+	 */
+
+	while (drive->blocked) {
+		yield();
+		// panic("ide: Request while drive blocked?");
+	}
+
 	if (!(rq->flags & REQ_CMD)) {
-		blk_dump_rq_flags(rq, "do_rw_disk, bad command");
+		blk_dump_rq_flags(rq, "idedisk_do_request - bad command");
 		ide_end_request(drive, 0);
 		return ide_stopped;
 	}
 
 	if (IS_PDC4030_DRIVE) {
 		extern ide_startstop_t promise_rw_disk(ide_drive_t *, struct request *, unsigned long);
+
 		return promise_rw_disk(drive, rq, block);
 	}
 
-	if ((drive->id->cfs_enable_2 & 0x0400) && (drive->addressing))	/* 48-bit LBA */
-		return lba_48_rw_disk(drive, rq, block);
-	if (drive->select.b.lba)		/* 28-bit LBA */
-		return lba_28_rw_disk(drive, rq, block);
+	/* 48-bit LBA */
+	if ((drive->id->cfs_enable_2 & 0x0400) && (drive->addressing))
+		return lba48_do_request(drive, rq, block);
 
-	/* 28-bit CHS : DIE DIE DIE piece of legacy crap!!! */
-	return chs_rw_disk(drive, rq, block);
+	/* 28-bit LBA */
+	if (drive->select.b.lba)
+		return lba28_do_request(drive, rq, block);
+
+	/* 28-bit CHS */
+	return chs_do_request(drive, rq, block);
 }
 
-static task_ioreg_t get_command (ide_drive_t *drive, int cmd)
+static task_ioreg_t get_command(ide_drive_t *drive, int cmd)
 {
 	int lba48bit = (drive->id->cfs_enable_2 & 0x0400) ? 1 : 0;
 
@@ -147,23 +158,25 @@ static task_ioreg_t get_command (ide_drive_t *drive, int cmd)
 	lba48bit = drive->addressing;
 #endif
 
-	if ((cmd == READ) && (drive->using_dma))
+	if (cmd == READ) {
+		if (drive->using_dma)
 			return (lba48bit) ? WIN_READDMA_EXT : WIN_READDMA;
-	else if ((cmd == READ) && (drive->mult_count))
+		else if (drive->mult_count)
 			return (lba48bit) ? WIN_MULTREAD_EXT : WIN_MULTREAD;
-	else if (cmd == READ)
+		else
 			return (lba48bit) ? WIN_READ_EXT : WIN_READ;
-	else if ((cmd == WRITE) && (drive->using_dma))
+	} else if (cmd == WRITE) {
+		if (drive->using_dma)
 			return (lba48bit) ? WIN_WRITEDMA_EXT : WIN_WRITEDMA;
-	else if ((cmd == WRITE) && (drive->mult_count))
+		else if (drive->mult_count)
 			return (lba48bit) ? WIN_MULTWRITE_EXT : WIN_MULTWRITE;
-	else if (cmd == WRITE)
-		return (lba48bit) ? WIN_WRITE_EXT : WIN_WRITE;
 		else
+			return (lba48bit) ? WIN_WRITE_EXT : WIN_WRITE;
+	}
 	return WIN_NOP;
 }
 
-static ide_startstop_t chs_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long block)
+static ide_startstop_t chs_do_request(ide_drive_t *drive, struct request *rq, unsigned long block)
 {
 	struct hd_drive_task_hdr	taskfile;
 	struct hd_drive_hob_hdr		hobfile;
@@ -203,19 +216,15 @@ static ide_startstop_t chs_rw_disk (ide_drive_t *drive, struct request *rq, unsi
 
 	memcpy(args.tfRegister, &taskfile, sizeof(struct hd_drive_task_hdr));
 	memcpy(args.hobRegister, &hobfile, sizeof(struct hd_drive_hob_hdr));
-	args.command_type	= ide_cmd_type_parser(&args);
-	args.prehandler		= ide_pre_handler_parser(&taskfile, &hobfile);
-	args.handler		= ide_handler_parser(&taskfile, &hobfile);
-	args.posthandler	= NULL;
-	args.rq			= (struct request *) rq;
+	ide_cmd_type_parser(&args);
+	args.rq	= rq;
 	args.block = block;
-	rq->special		= NULL;
-	rq->special		= (ide_task_t *)&args;
+	rq->special = &args;
 
 	return do_rw_taskfile(drive, &args);
 }
 
-static ide_startstop_t lba_28_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long block)
+static ide_startstop_t lba28_do_request(ide_drive_t *drive, struct request *rq, unsigned long block)
 {
 	struct hd_drive_task_hdr	taskfile;
 	struct hd_drive_hob_hdr		hobfile;
@@ -250,14 +259,10 @@ static ide_startstop_t lba_28_rw_disk (ide_drive_t *drive, struct request *rq, u
 
 	memcpy(args.tfRegister, &taskfile, sizeof(struct hd_drive_task_hdr));
 	memcpy(args.hobRegister, &hobfile, sizeof(struct hd_drive_hob_hdr));
-	args.command_type	= ide_cmd_type_parser(&args);
-	args.prehandler		= ide_pre_handler_parser(&taskfile, &hobfile);
-	args.handler		= ide_handler_parser(&taskfile, &hobfile);
-	args.posthandler	= NULL;
-	args.rq			= (struct request *) rq;
+	ide_cmd_type_parser(&args);
+	args.rq = rq;
 	args.block = block;
-	rq->special		= NULL;
-	rq->special		= (ide_task_t *)&args;
+	rq->special = &args;
 
 	return do_rw_taskfile(drive, &args);
 }
@@ -268,7 +273,7 @@ static ide_startstop_t lba_28_rw_disk (ide_drive_t *drive, struct request *rq, u
  * 1073741822 == 549756 MB or 48bit addressing fake drive
  */
 
-static ide_startstop_t lba_48_rw_disk (ide_drive_t *drive, struct request *rq, unsigned long long block)
+static ide_startstop_t lba48_do_request(ide_drive_t *drive, struct request *rq, unsigned long long block)
 {
 	struct hd_drive_task_hdr	taskfile;
 	struct hd_drive_hob_hdr		hobfile;
@@ -314,13 +319,10 @@ static ide_startstop_t lba_48_rw_disk (ide_drive_t *drive, struct request *rq, u
 
 	memcpy(args.tfRegister, &taskfile, sizeof(struct hd_drive_task_hdr));
 	memcpy(args.hobRegister, &hobfile, sizeof(struct hd_drive_hob_hdr));
-	args.command_type	= ide_cmd_type_parser(&args);
-	args.prehandler		= ide_pre_handler_parser(&taskfile, &hobfile);
-	args.handler		= ide_handler_parser(&taskfile, &hobfile);
-	args.posthandler	= NULL;
-	args.rq			= (struct request *) rq;
+	ide_cmd_type_parser(&args);
+	args.rq = rq;
 	args.block = block;
-	rq->special		= (ide_task_t *)&args;
+	rq->special = &args;
 
 	return do_rw_taskfile(drive, &args);
 }
@@ -639,7 +641,7 @@ static ide_startstop_t idedisk_special (ide_drive_t *drive)
 		if (!IS_PDC4030_DRIVE) {
 			taskfile.sector_count = drive->sect;
 			taskfile.command = WIN_SPECIFY;
-			handler			= ide_handler_parser(&taskfile, &hobfile);
+			handler	= set_geometry_intr;;
 		}
 		do_taskfile(drive, &taskfile, &hobfile, handler);
 	} else if (s->b.recalibrate) {
@@ -651,7 +653,7 @@ static ide_startstop_t idedisk_special (ide_drive_t *drive)
 			memset(&hobfile, 0, sizeof(struct hd_drive_hob_hdr));
 			taskfile.sector_count	= drive->sect;
 			taskfile.command	= WIN_RESTORE;
-			do_taskfile(drive, &taskfile, &hobfile, ide_handler_parser(&taskfile, &hobfile));
+			do_taskfile(drive, &taskfile, &hobfile, recal_intr);
 		}
 	} else if (s->b.set_multmode) {
 		s->b.set_multmode = 0;
@@ -1089,7 +1091,7 @@ static struct ata_operations idedisk_driver = {
 	owner:			THIS_MODULE,
 	cleanup:		idedisk_cleanup,
 	standby:		idedisk_standby,
-	do_request:		do_rw_disk,
+	do_request:		idedisk_do_request,
 	end_request:		NULL,
 	ioctl:			NULL,
 	open:			idedisk_open,

drivers/ide/ide-pci.c

@@ -119,6 +119,7 @@ extern void ide_init_pdc202xx(ide_hwif_t *);
 extern unsigned int pci_init_piix(struct pci_dev *);
 extern unsigned int ata66_piix(ide_hwif_t *);
 extern void ide_init_piix(ide_hwif_t *);
+extern void ide_dmacapable_piix(ide_hwif_t *, unsigned long);
 #endif
 
 #ifdef CONFIG_BLK_DEV_IT8172
@@ -142,12 +143,6 @@ extern unsigned int ata66_sis5513(ide_hwif_t *);
 extern void ide_init_sis5513(ide_hwif_t *);
 #endif
 
-#ifdef CONFIG_BLK_DEV_SLC90E66
-extern unsigned int pci_init_slc90e66(struct pci_dev *);
-extern unsigned int ata66_slc90e66(ide_hwif_t *);
-extern void ide_init_slc90e66(ide_hwif_t *);
-#endif
-
 #ifdef CONFIG_BLK_DEV_SL82C105
 extern unsigned int pci_init_sl82c105(struct pci_dev *);
 extern void dma_init_sl82c105(ide_hwif_t *, unsigned long);
@@ -197,19 +192,18 @@ typedef struct ide_pci_device_s {
 
 static ide_pci_device_t pci_chipsets[] __initdata = {
 #ifdef CONFIG_BLK_DEV_PIIX
-	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371FB_0, NULL, NULL, ide_init_piix,	NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
-	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371FB_1, NULL, NULL, ide_init_piix,	NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
-	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371MX, NULL, NULL, ide_init_piix, NULL, {{0x6D,0x80,0x80}, {0x6F,0x80,0x80}}, ON_BOARD, 0, ATA_F_NODMA },
-	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_1, pci_init_piix, NULL, ide_init_piix, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
-	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB, pci_init_piix, NULL,	ide_init_piix, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
-	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_1, pci_init_piix, NULL, ide_init_piix, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
-	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_1, pci_init_piix, NULL, ide_init_piix, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
-	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_1, pci_init_piix, ata66_piix, ide_init_piix, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
-	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82372FB_1, pci_init_piix, ata66_piix, ide_init_piix, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
-	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_init_piix, NULL,	ide_init_piix, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, ATA_F_NOADMA },
-	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_9, pci_init_piix, ata66_piix,	ide_init_piix, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
-	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_8, pci_init_piix, ata66_piix,	ide_init_piix, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
-	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, pci_init_piix, ata66_piix, ide_init_piix,	NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371FB_1, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_1, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_1, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82372FB_1, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_1, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_1, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_9, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_8, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_11, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
+	{PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1, pci_init_piix, ata66_piix, ide_init_piix, ide_dmacapable_piix, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
 #endif
 #ifdef CONFIG_BLK_DEV_VIA82CXXX
 	{PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576_1,	pci_init_via82cxxx, ata66_via82cxxx, ide_init_via82cxxx, ide_dmacapable_via82cxxx, {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, ON_BOARD, 0, ATA_F_NOADMA },
@@ -289,13 +283,11 @@ static ide_pci_device_t pci_chipsets[] __initdata = {
 	{PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7411, pci_init_amd74xx, ata66_amd74xx, ide_init_amd74xx, ide_dmacapable_amd74xx, {{0x40,0x01,0x01}, {0x40,0x02,0x02}}, ON_BOARD, 0, 0 },
 	{PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_OPUS_7441, pci_init_amd74xx, ata66_amd74xx, ide_init_amd74xx, ide_dmacapable_amd74xx, {{0x40,0x01,0x01}, {0x40,0x02,0x02}}, ON_BOARD, 0, 0 },
 	{PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE, pci_init_amd74xx, ata66_amd74xx, ide_init_amd74xx, ide_dmacapable_amd74xx, {{0x40,0x01,0x01}, {0x40,0x02,0x02}}, ON_BOARD, 0, 0 },
+	{PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, pci_init_amd74xx, ata66_amd74xx, ide_init_amd74xx, ide_dmacapable_amd74xx, {{0x50,0x01,0x01}, {0x50,0x02,0x02}}, ON_BOARD, 0, 0 },
 #endif
 #ifdef CONFIG_BLK_DEV_PDC_ADMA
 	{PCI_VENDOR_ID_PDC, PCI_DEVICE_ID_PDC_1841, pci_init_pdcadma, ata66_pdcadma, ide_init_pdcadma, ide_dmacapable_pdcadma, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, OFF_BOARD, 0, ATA_F_NODMA },
 #endif
-#ifdef CONFIG_BLK_DEV_SLC90E66
-	{PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1, pci_init_slc90e66, ata66_slc90e66, ide_init_slc90e66, NULL, {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, ON_BOARD, 0, 0 },
-#endif
 #ifdef CONFIG_BLK_DEV_SVWKS
         {PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, pci_init_svwks, ata66_svwks, ide_init_svwks, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, ATA_F_DMA },
 	{PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, pci_init_svwks, ata66_svwks, ide_init_svwks, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, 0 },
@@ -311,6 +303,7 @@ static ide_pci_device_t pci_chipsets[] __initdata = {
 	{PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87410, NULL, NULL, NULL, NULL, {{0x43,0x08,0x08}, {0x47,0x08,0x08}}, ON_BOARD, 0, 0 },
 	{PCI_VENDOR_ID_HINT, PCI_DEVICE_ID_HINT, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, 0 },
 	{PCI_VENDOR_ID_HOLTEK, PCI_DEVICE_ID_HOLTEK_6565, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, 0 },
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371MX, NULL, NULL, NULL, NULL, {{0x6D,0x80,0x80}, {0x00,0x00,0x00}}, ON_BOARD, 0, ATA_F_NODMA },
 	{PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8673F, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, ATA_F_FIXIRQ },
 	{PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886A, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, ATA_F_FIXIRQ },
 	{PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, NULL, NULL, NULL, NULL, {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ON_BOARD, 0, ATA_F_FIXIRQ },

drivers/ide/ide-proc.c

@@ -118,10 +118,6 @@ int (*svwks_display_info)(char *, char **, off_t, int) = NULL;
 extern byte sis_proc;
 int (*sis_display_info)(char *, char **, off_t, int) = NULL;
 #endif /* CONFIG_BLK_DEV_SIS5513 */
-#ifdef CONFIG_BLK_DEV_SLC90E66
-extern byte slc90e66_proc;
-int (*slc90e66_display_info)(char *, char **, off_t, int) = NULL;
-#endif /* CONFIG_BLK_DEV_SLC90E66 */
 #ifdef CONFIG_BLK_DEV_VIA82CXXX
 extern byte via_proc;
 int (*via_display_info)(char *, char **, off_t, int) = NULL;
@@ -593,10 +589,6 @@ void proc_ide_create(void)
 	if ((sis_display_info) && (sis_proc))
 		create_proc_info_entry("sis", 0, proc_ide_root, sis_display_info);
 #endif /* CONFIG_BLK_DEV_SIS5513 */
-#ifdef CONFIG_BLK_DEV_SLC90E66
-	if ((slc90e66_display_info) && (slc90e66_proc))
-		create_proc_info_entry("slc90e66", 0, proc_ide_root, slc90e66_display_info);
-#endif /* CONFIG_BLK_DEV_SLC90E66 */
 #ifdef CONFIG_BLK_DEV_VIA82CXXX
 	if ((via_display_info) && (via_proc))
 		create_proc_info_entry("via", 0, proc_ide_root, via_display_info);
@@ -653,10 +645,6 @@ void proc_ide_destroy(void)
 	if ((sis_display_info) && (sis_proc))
 		remove_proc_entry("ide/sis", 0);
 #endif /* CONFIG_BLK_DEV_SIS5513 */
-#ifdef CONFIG_BLK_DEV_SLC90E66
-	if ((slc90e66_display_info) && (slc90e66_proc))
-		remove_proc_entry("ide/slc90e66",0);
-#endif /* CONFIG_BLK_DEV_SLC90E66 */
 #ifdef CONFIG_BLK_DEV_VIA82CXXX
 	if ((via_display_info) && (via_proc))
 		remove_proc_entry("ide/via",0);

drivers/ide/ide-taskfile.c

@@ -38,6 +38,8 @@
 #define DTF(x...)
 #endif
 
+#define SUPPORT_VLB_SYNC 1
+
 /*
  * for now, taskfile requests are special :/
  */
@@ -56,7 +58,7 @@ static inline void ide_unmap_rq(struct request *rq, char *to,
 	    bio_kunmap_irq(to, flags);
 }
 
-static void ata_bswap_data (void *buffer, int wcount)
+static void bswap_data (void *buffer, int wcount)
 {
 	u16 *p = buffer;
 
@@ -74,18 +76,20 @@ static void ata_bswap_data (void *buffer, int wcount)
  * of the sector count register location, with interrupts disabled
  * to ensure that the reads all happen together.
  */
-static inline void task_vlb_sync(ide_ioreg_t port)
+static inline void task_vlb_sync(ide_drive_t *drive)
 {
-	IN_BYTE (port);
-	IN_BYTE (port);
-	IN_BYTE (port);
+	ide_ioreg_t port = IDE_NSECTOR_REG;
+
+	IN_BYTE(port);
+	IN_BYTE(port);
+	IN_BYTE(port);
 }
 #endif
 
 /*
  * This is used for most PIO data transfers *from* the IDE interface
  */
-void ata_input_data (ide_drive_t *drive, void *buffer, unsigned int wcount)
+void ata_input_data(ide_drive_t *drive, void *buffer, unsigned int wcount)
 {
 	byte io_32bit;
 
@@ -107,7 +111,7 @@ void ata_input_data (ide_drive_t *drive, void *buffer, unsigned int wcount)
 			unsigned long flags;
 			__save_flags(flags);	/* local CPU only */
 			__cli();		/* local CPU only */
-			task_vlb_sync(IDE_NSECTOR_REG);
+			task_vlb_sync(drive);
 			insl(IDE_DATA_REG, buffer, wcount);
 			__restore_flags(flags);	/* local CPU only */
 		} else
@@ -130,7 +134,7 @@ void ata_input_data (ide_drive_t *drive, void *buffer, unsigned int wcount)
 /*
  * This is used for most PIO data transfers *to* the IDE interface
  */
-void ata_output_data (ide_drive_t *drive, void *buffer, unsigned int wcount)
+void ata_output_data(ide_drive_t *drive, void *buffer, unsigned int wcount)
 {
 	byte io_32bit;
 
@@ -147,7 +151,7 @@ void ata_output_data (ide_drive_t *drive, void *buffer, unsigned int wcount)
 			unsigned long flags;
 			__save_flags(flags);	/* local CPU only */
 			__cli();		/* local CPU only */
-			task_vlb_sync(IDE_NSECTOR_REG);
+			task_vlb_sync(drive);
 			outsl(IDE_DATA_REG, buffer, wcount);
 			__restore_flags(flags);	/* local CPU only */
 		} else
@@ -188,7 +192,7 @@ void atapi_input_bytes (ide_drive_t *drive, void *buffer, unsigned int bytecount
 		insw_swapw(IDE_DATA_REG, buffer, bytecount / 2);
 		return;
 	}
-#endif /* CONFIG_ATARI */
+#endif
 	ata_input_data (drive, buffer, bytecount / 4);
 	if ((bytecount & 0x03) >= 2)
 		insw (IDE_DATA_REG, ((byte *)buffer) + (bytecount & ~0x03), 1);
@@ -208,25 +212,25 @@ void atapi_output_bytes (ide_drive_t *drive, void *buffer, unsigned int bytecoun
 		outsw_swapw(IDE_DATA_REG, buffer, bytecount / 2);
 		return;
 	}
-#endif /* CONFIG_ATARI */
+#endif
 	ata_output_data (drive, buffer, bytecount / 4);
 	if ((bytecount & 0x03) >= 2)
-		outsw (IDE_DATA_REG, ((byte *)buffer) + (bytecount & ~0x03), 1);
+		outsw(IDE_DATA_REG, ((byte *)buffer) + (bytecount & ~0x03), 1);
 }
 
-void taskfile_input_data (ide_drive_t *drive, void *buffer, unsigned int wcount)
+void taskfile_input_data(ide_drive_t *drive, void *buffer, unsigned int wcount)
 {
 	ata_input_data(drive, buffer, wcount);
 	if (drive->bswap)
-		ata_bswap_data(buffer, wcount);
+		bswap_data(buffer, wcount);
 }
 
-void taskfile_output_data (ide_drive_t *drive, void *buffer, unsigned int wcount)
+void taskfile_output_data(ide_drive_t *drive, void *buffer, unsigned int wcount)
 {
 	if (drive->bswap) {
-		ata_bswap_data(buffer, wcount);
+		bswap_data(buffer, wcount);
 		ata_output_data(drive, buffer, wcount);
-		ata_bswap_data(buffer, wcount);
+		bswap_data(buffer, wcount);
 	} else {
 		ata_output_data(drive, buffer, wcount);
 	}
@@ -235,7 +239,7 @@ void taskfile_output_data (ide_drive_t *drive, void *buffer, unsigned int wcount
 /*
  * Needed for PCI irq sharing
  */
-int drive_is_ready (ide_drive_t *drive)
+int drive_is_ready(ide_drive_t *drive)
 {
 	byte stat = 0;
 	if (drive->waiting_for_dma)
@@ -255,7 +259,7 @@ int drive_is_ready (ide_drive_t *drive)
 	if (IDE_CONTROL_REG)
 		stat = GET_ALTSTAT();
 	else
-#endif /* CONFIG_IDEPCI_SHARE_IRQ */
+#endif
 	stat = GET_STAT();	/* Note: this may clear a pending IRQ!! */
 
 	if (stat & BUSY_STAT)
@@ -291,7 +295,7 @@ static ide_startstop_t bio_mulout_intr(ide_drive_t *drive);
  * Called directly from execute_drive_cmd for the first bunch of sectors,
  * afterwards only by the ISR
  */
-static ide_startstop_t task_mulout_intr (ide_drive_t *drive)
+static ide_startstop_t task_mulout_intr(ide_drive_t *drive)
 {
 	unsigned int		msect, nsect;
 	byte stat		= GET_STAT();
@@ -314,6 +318,7 @@ static ide_startstop_t task_mulout_intr (ide_drive_t *drive)
 		 * necessary
 		 */
 		ide_end_request(drive, 1);
+
 		return ide_stopped;
 	}
 
@@ -341,13 +346,14 @@ static ide_startstop_t task_mulout_intr (ide_drive_t *drive)
 	ide_unmap_rq(rq, pBuf, &flags);
 	drive->io_32bit = io_32bit;
 	rq->errors = 0;
+	/* Are we sure that this as all been already transfered? */
 	rq->current_nr_sectors -= nsect;
 	if (hwgroup->handler == NULL)
 		ide_set_handler(drive, &task_mulout_intr, WAIT_CMD, NULL);
 	return ide_started;
 }
 
-ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
+ide_startstop_t do_rw_taskfile(ide_drive_t *drive, ide_task_t *task)
 {
 	task_struct_t *taskfile = (task_struct_t *) task->tfRegister;
 	hob_struct_t *hobfile = (hob_struct_t *) task->hobRegister;
@@ -399,7 +405,9 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
 	return ide_started;
 }
 
-void do_taskfile (ide_drive_t *drive, struct hd_drive_task_hdr *taskfile, struct hd_drive_hob_hdr *hobfile, ide_handler_t *handler)
+void do_taskfile(ide_drive_t *drive, struct hd_drive_task_hdr *taskfile,
+		struct hd_drive_hob_hdr *hobfile,
+		ide_handler_t *handler)
 {
 	struct hd_driveid *id = drive->id;
 	byte HIHI = (drive->addressing) ? 0xE0 : 0xEF;
@@ -439,10 +447,6 @@ void do_taskfile (ide_drive_t *drive, struct hd_drive_task_hdr *taskfile, struct
 	}
 }
 
-/*
- * Handler for special commands without a data phase from ide-disk
- */
-
 /*
  * This is invoked on completion of a WIN_SETMULT cmd.
  */
@@ -463,7 +467,7 @@ ide_startstop_t set_multmode_intr (ide_drive_t *drive)
 /*
  * This is invoked on completion of a WIN_SPECIFY cmd.
  */
-static ide_startstop_t set_geometry_intr (ide_drive_t *drive)
+ide_startstop_t set_geometry_intr (ide_drive_t *drive)
 {
 	byte stat;
 
@@ -480,7 +484,7 @@ static ide_startstop_t set_geometry_intr (ide_drive_t *drive)
 /*
  * This is invoked on completion of a WIN_RESTORE (recalibrate) cmd.
  */
-static ide_startstop_t recal_intr (ide_drive_t *drive)
+ide_startstop_t recal_intr(ide_drive_t *drive)
 {
 	byte stat = GET_STAT();
 
@@ -713,37 +717,6 @@ static ide_startstop_t bio_mulout_intr (ide_drive_t *drive)
 	return ide_started;
 }
 
-/* Called by internal to feature out type of command being called */
-ide_pre_handler_t * ide_pre_handler_parser (struct hd_drive_task_hdr *taskfile, struct hd_drive_hob_hdr *hobfile)
-{
-	switch(taskfile->command) {
-				/* IDE_DRIVE_TASK_RAW_WRITE */
-				/* IDE_DRIVE_TASK_OUT */
-		case WIN_WRITE:
-		case WIN_WRITE_EXT:
-		case WIN_WRITE_VERIFY:
-		case WIN_WRITE_BUFFER:
-		case CFA_WRITE_SECT_WO_ERASE:
-		case WIN_DOWNLOAD_MICROCODE:
-			return &pre_task_out_intr;
-		case CFA_WRITE_MULTI_WO_ERASE:
-		case WIN_MULTWRITE:
-		case WIN_MULTWRITE_EXT:
-			return &pre_bio_out_intr;
-		case WIN_SMART:
-			if (taskfile->feature == SMART_WRITE_LOG_SECTOR)
-				return &pre_task_out_intr;
-		case WIN_WRITEDMA:
-		case WIN_WRITEDMA_QUEUED:
-		case WIN_WRITEDMA_EXT:
-		case WIN_WRITEDMA_QUEUED_EXT:
-				/* IDE_DRIVE_TASK_OUT */
-		default:
-			break;
-	}
-	return(NULL);
-}
-
 /*
  * Handler for command with Read Multiple
  */
@@ -798,154 +771,85 @@ static ide_startstop_t task_mulin_intr(ide_drive_t *drive)
 	return ide_started;
 }
 
-/* Called by internal to feature out type of command being called */
-ide_handler_t * ide_handler_parser (struct hd_drive_task_hdr *taskfile, struct hd_drive_hob_hdr *hobfile)
-{
-	switch(taskfile->command) {
-		case WIN_IDENTIFY:
-		case WIN_PIDENTIFY:
-		case CFA_TRANSLATE_SECTOR:
-		case WIN_READ_BUFFER:
-		case WIN_READ:
-		case WIN_READ_EXT:
-			return &task_in_intr;
-		case WIN_SECURITY_DISABLE:
-		case WIN_SECURITY_ERASE_UNIT:
-		case WIN_SECURITY_SET_PASS:
-		case WIN_SECURITY_UNLOCK:
-		case WIN_DOWNLOAD_MICROCODE:
-		case CFA_WRITE_SECT_WO_ERASE:
-		case WIN_WRITE_BUFFER:
-		case WIN_WRITE_VERIFY:
-		case WIN_WRITE:
-		case WIN_WRITE_EXT:
-			return &task_out_intr;
-		case WIN_MULTREAD:
-		case WIN_MULTREAD_EXT:
-			return &task_mulin_intr;
-		case CFA_WRITE_MULTI_WO_ERASE:
-		case WIN_MULTWRITE:
-		case WIN_MULTWRITE_EXT:
-			return &bio_mulout_intr;
-		case WIN_SMART:
-			switch(taskfile->feature) {
-				case SMART_READ_VALUES:
-				case SMART_READ_THRESHOLDS:
-				case SMART_READ_LOG_SECTOR:
-					return &task_in_intr;
-				case SMART_WRITE_LOG_SECTOR:
-					return &task_out_intr;
-				default:
-					return &task_no_data_intr;
-			}
-		case CFA_REQ_EXT_ERROR_CODE:
-		case CFA_ERASE_SECTORS:
-		case WIN_VERIFY:
-		case WIN_VERIFY_EXT:
-		case WIN_SEEK:
-			return &task_no_data_intr;
-		case WIN_SPECIFY:
-			return &set_geometry_intr;
-		case WIN_RESTORE:
-			return &recal_intr;
-		case WIN_DIAGNOSE:
-		case WIN_FLUSH_CACHE:
-		case WIN_FLUSH_CACHE_EXT:
-		case WIN_STANDBYNOW1:
-		case WIN_STANDBYNOW2:
-		case WIN_SLEEPNOW1:
-		case WIN_SLEEPNOW2:
-		case WIN_SETIDLE1:
-		case WIN_CHECKPOWERMODE1:
-		case WIN_CHECKPOWERMODE2:
-		case WIN_GETMEDIASTATUS:
-		case WIN_MEDIAEJECT:
-			return &task_no_data_intr;
-		case WIN_SETMULT:
-			return &set_multmode_intr;
-		case WIN_READ_NATIVE_MAX:
-		case WIN_SET_MAX:
-		case WIN_READ_NATIVE_MAX_EXT:
-		case WIN_SET_MAX_EXT:
-		case WIN_SECURITY_ERASE_PREPARE:
-		case WIN_SECURITY_FREEZE_LOCK:
-		case WIN_DOORLOCK:
-		case WIN_DOORUNLOCK:
-		case WIN_SETFEATURES:
-			return &task_no_data_intr;
-		case DISABLE_SEAGATE:
-		case EXABYTE_ENABLE_NEST:
-			return &task_no_data_intr;
-#ifdef CONFIG_BLK_DEV_IDEDMA
-		case WIN_READDMA:
-		case WIN_IDENTIFY_DMA:
-		case WIN_READDMA_QUEUED:
-		case WIN_READDMA_EXT:
-		case WIN_READDMA_QUEUED_EXT:
-		case WIN_WRITEDMA:
-		case WIN_WRITEDMA_QUEUED:
-		case WIN_WRITEDMA_EXT:
-		case WIN_WRITEDMA_QUEUED_EXT:
-#endif
-		case WIN_FORMAT:
-		case WIN_INIT:
-		case WIN_DEVICE_RESET:
-		case WIN_QUEUED_SERVICE:
-		case WIN_PACKETCMD:
-		default:
-			return NULL;
-	}
-}
-
 /* Called by ioctl to feature out type of command being called */
-int ide_cmd_type_parser (ide_task_t *args)
+void ide_cmd_type_parser(ide_task_t *args)
 {
 	struct hd_drive_task_hdr *taskfile = (struct hd_drive_task_hdr *) args->tfRegister;
-	struct hd_drive_hob_hdr *hobfile = (struct hd_drive_hob_hdr *) args->hobRegister;
 
-	args->prehandler = ide_pre_handler_parser(taskfile, hobfile);
-	args->handler = ide_handler_parser(taskfile, hobfile);
+	args->prehandler = NULL;
+	args->handler = NULL;
 
 	switch(args->tfRegister[IDE_COMMAND_OFFSET]) {
 		case WIN_IDENTIFY:
 		case WIN_PIDENTIFY:
-			return IDE_DRIVE_TASK_IN;
+			args->handler = task_in_intr;
+			args->command_type = IDE_DRIVE_TASK_IN;
+			return;
+
 		case CFA_TRANSLATE_SECTOR:
 		case WIN_READ:
 		case WIN_READ_EXT:
 		case WIN_READ_BUFFER:
-			return IDE_DRIVE_TASK_IN;
+			args->handler = task_in_intr;
+			args->command_type = IDE_DRIVE_TASK_IN;
+			return;
+
 		case WIN_WRITE:
 		case WIN_WRITE_EXT:
 		case WIN_WRITE_VERIFY:
 		case WIN_WRITE_BUFFER:
 		case CFA_WRITE_SECT_WO_ERASE:
 		case WIN_DOWNLOAD_MICROCODE:
-			return IDE_DRIVE_TASK_RAW_WRITE;
+			args->prehandler = pre_task_out_intr;
+			args->handler = task_out_intr;
+			args->command_type = IDE_DRIVE_TASK_RAW_WRITE;
+			return;
+
 		case WIN_MULTREAD:
 		case WIN_MULTREAD_EXT:
-			return IDE_DRIVE_TASK_IN;
+			args->handler = task_mulin_intr;
+			args->command_type = IDE_DRIVE_TASK_IN;
+			return;
+
 		case CFA_WRITE_MULTI_WO_ERASE:
 		case WIN_MULTWRITE:
 		case WIN_MULTWRITE_EXT:
-			return IDE_DRIVE_TASK_RAW_WRITE;
+			args->prehandler = pre_bio_out_intr;
+			args->handler = bio_mulout_intr;
+			args->command_type = IDE_DRIVE_TASK_RAW_WRITE;
+			return;
+
 		case WIN_SECURITY_DISABLE:
 		case WIN_SECURITY_ERASE_UNIT:
 		case WIN_SECURITY_SET_PASS:
 		case WIN_SECURITY_UNLOCK:
-			return IDE_DRIVE_TASK_OUT;
+			args->handler = task_out_intr;
+			args->command_type = IDE_DRIVE_TASK_OUT;
+			return;
+
 		case WIN_SMART:
+			if (taskfile->feature == SMART_WRITE_LOG_SECTOR)
+				args->prehandler = pre_task_out_intr;
 			args->tfRegister[IDE_LCYL_OFFSET] = SMART_LCYL_PASS;
 			args->tfRegister[IDE_HCYL_OFFSET] = SMART_HCYL_PASS;
 			switch(args->tfRegister[IDE_FEATURE_OFFSET]) {
 				case SMART_READ_VALUES:
 				case SMART_READ_THRESHOLDS:
 				case SMART_READ_LOG_SECTOR:
-					return IDE_DRIVE_TASK_IN;
+					args->handler = task_in_intr;
+					args->command_type = IDE_DRIVE_TASK_IN;
+					return;
+
 				case SMART_WRITE_LOG_SECTOR:
-					return IDE_DRIVE_TASK_OUT;
+					args->handler = task_out_intr;
+					args->command_type = IDE_DRIVE_TASK_OUT;
+					return;
+
 				default:
-					return IDE_DRIVE_TASK_NO_DATA;
+					args->handler = task_no_data_intr;
+					args->command_type = IDE_DRIVE_TASK_NO_DATA;
+					return;
+
 			}
 #ifdef CONFIG_BLK_DEV_IDEDMA
 		case WIN_READDMA:
@@ -953,17 +857,23 @@ int ide_cmd_type_parser (ide_task_t *args)
 		case WIN_READDMA_QUEUED:
 		case WIN_READDMA_EXT:
 		case WIN_READDMA_QUEUED_EXT:
-			return IDE_DRIVE_TASK_IN;
+			args->command_type = IDE_DRIVE_TASK_IN;
+			return;
+
 		case WIN_WRITEDMA:
 		case WIN_WRITEDMA_QUEUED:
 		case WIN_WRITEDMA_EXT:
 		case WIN_WRITEDMA_QUEUED_EXT:
-			return IDE_DRIVE_TASK_RAW_WRITE;
+			args->command_type = IDE_DRIVE_TASK_RAW_WRITE;
+			return;
+
 #endif
 		case WIN_SETFEATURES:
+			args->handler = task_no_data_intr;
 			switch(args->tfRegister[IDE_FEATURE_OFFSET]) {
 				case SETFEATURES_XFER:
-					return IDE_DRIVE_TASK_SET_XFER;
+					args->command_type = IDE_DRIVE_TASK_SET_XFER;
+					return;
 				case SETFEATURES_DIS_DEFECT:
 				case SETFEATURES_EN_APM:
 				case SETFEATURES_DIS_MSN:
@@ -980,16 +890,20 @@ int ide_cmd_type_parser (ide_task_t *args)
 				case SETFEATURES_DIS_RI:
 				case SETFEATURES_DIS_SI:
 				default:
-					return IDE_DRIVE_TASK_NO_DATA;
+					args->command_type = IDE_DRIVE_TASK_NO_DATA;
+					return;
 			}
-		case WIN_NOP:
-		case CFA_REQ_EXT_ERROR_CODE:
-		case CFA_ERASE_SECTORS:
-		case WIN_VERIFY:
-		case WIN_VERIFY_EXT:
-		case WIN_SEEK:
+
 		case WIN_SPECIFY:
+			args->handler = set_geometry_intr;
+			args->command_type = IDE_DRIVE_TASK_NO_DATA;
+			return;
+
 		case WIN_RESTORE:
+			args->handler = recal_intr;
+			args->command_type = IDE_DRIVE_TASK_NO_DATA;
+			return;
+
 		case WIN_DIAGNOSE:
 		case WIN_FLUSH_CACHE:
 		case WIN_FLUSH_CACHE_EXT:
@@ -998,29 +912,48 @@ int ide_cmd_type_parser (ide_task_t *args)
 		case WIN_SLEEPNOW1:
 		case WIN_SLEEPNOW2:
 		case WIN_SETIDLE1:
-		case DISABLE_SEAGATE:
 		case WIN_CHECKPOWERMODE1:
 		case WIN_CHECKPOWERMODE2:
 		case WIN_GETMEDIASTATUS:
 		case WIN_MEDIAEJECT:
-		case WIN_SETMULT:
+		case CFA_REQ_EXT_ERROR_CODE:
+		case CFA_ERASE_SECTORS:
+		case WIN_VERIFY:
+		case WIN_VERIFY_EXT:
+		case WIN_SEEK:
 		case WIN_READ_NATIVE_MAX:
 		case WIN_SET_MAX:
 		case WIN_READ_NATIVE_MAX_EXT:
 		case WIN_SET_MAX_EXT:
 		case WIN_SECURITY_ERASE_PREPARE:
 		case WIN_SECURITY_FREEZE_LOCK:
-		case EXABYTE_ENABLE_NEST:
 		case WIN_DOORLOCK:
 		case WIN_DOORUNLOCK:
-			return IDE_DRIVE_TASK_NO_DATA;
+		case DISABLE_SEAGATE:
+		case EXABYTE_ENABLE_NEST:
+
+			args->handler = task_no_data_intr;
+			args->command_type = IDE_DRIVE_TASK_NO_DATA;
+			return;
+
+		case WIN_SETMULT:
+			args->handler = set_multmode_intr;
+			args->command_type = IDE_DRIVE_TASK_NO_DATA;
+			return;
+
+		case WIN_NOP:
+
+			args->command_type = IDE_DRIVE_TASK_NO_DATA;
+			return;
+
 		case WIN_FORMAT:
 		case WIN_INIT:
 		case WIN_DEVICE_RESET:
 		case WIN_QUEUED_SERVICE:
 		case WIN_PACKETCMD:
 		default:
-			return IDE_DRIVE_TASK_INVALID;
+			args->command_type = IDE_DRIVE_TASK_INVALID;
+			return;
 	}
 }
 
@@ -1067,7 +1000,7 @@ int ide_wait_taskfile(ide_drive_t *drive, struct hd_drive_task_hdr *taskfile, st
 
 	ide_init_drive_taskfile(&rq);
 	/* This is kept for internal use only !!! */
-	args.command_type = ide_cmd_type_parser (&args);
+	ide_cmd_type_parser(&args);
 	if (args.command_type != IDE_DRIVE_TASK_NO_DATA)
 		rq.current_nr_sectors = rq.nr_sectors = (hobfile->sector_count << 8) | taskfile->sector_count;
 
@@ -1232,14 +1165,13 @@ EXPORT_SYMBOL(taskfile_output_data);
 EXPORT_SYMBOL(do_rw_taskfile);
 EXPORT_SYMBOL(do_taskfile);
 
+EXPORT_SYMBOL(recal_intr);
+EXPORT_SYMBOL(set_geometry_intr);
 EXPORT_SYMBOL(set_multmode_intr);
-
 EXPORT_SYMBOL(task_no_data_intr);
 
 EXPORT_SYMBOL(ide_wait_taskfile);
 EXPORT_SYMBOL(ide_raw_taskfile);
-EXPORT_SYMBOL(ide_pre_handler_parser);
-EXPORT_SYMBOL(ide_handler_parser);
 EXPORT_SYMBOL(ide_cmd_type_parser);
 EXPORT_SYMBOL(ide_cmd_ioctl);
 EXPORT_SYMBOL(ide_task_ioctl);

drivers/ide/pdc4030.c

@@ -654,14 +654,14 @@ ide_startstop_t promise_rw_disk (ide_drive_t *drive, struct request *rq, unsigne
 
 	memcpy(args.tfRegister, &taskfile, sizeof(struct hd_drive_task_hdr));
 	memcpy(args.hobRegister, NULL, sizeof(struct hd_drive_hob_hdr));
-	args.command_type	= ide_cmd_type_parser(&args);
+	ide_cmd_type_parser(&args);
+	/* We don't use the generic inerrupt handlers here? */
 	args.prehandler		= NULL;
 	args.handler		= NULL;
-	args.posthandler	= NULL;
-	args.rq			= (struct request *) rq;
+	args.rq			= rq;
 	args.block		= block;
 	rq->special		= NULL;
-	rq->special		= (ide_task_t *)&args;
+	rq->special		= &args;
 
 	return do_pdc4030_io(drive, &args);
 }

drivers/ide/piix.c

 /*
- *  linux/drivers/ide/piix.c		Version 0.32	June 9, 2000
+ * $Id: piix.c,v 1.2 2002/03/13 22:50:43 vojtech Exp $
  *
- *  Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
- *  Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
- *  May be copied or modified under the terms of the GNU General Public License
+ *  Copyright (c) 2000-2002 Vojtech Pavlik
  *
- *  PIO mode setting function for Intel chipsets.  
- *  For use instead of BIOS settings.
+ *  Based on the work of:
+ *	Andrzej Krzysztofowicz
+ *      Andre Hedrick
  *
- * 40-41
- * 42-43
- * 
- *                 41
- *                 43
- *
- * | PIO 0       | c0 | 80 | 0 | 	piix_tune_drive(drive, 0);
- * | PIO 2 | SW2 | d0 | 90 | 4 | 	piix_tune_drive(drive, 2);
- * | PIO 3 | MW1 | e1 | a1 | 9 | 	piix_tune_drive(drive, 3);
- * | PIO 4 | MW2 | e3 | a3 | b | 	piix_tune_drive(drive, 4);
- * 
- * sitre = word40 & 0x4000; primary
- * sitre = word42 & 0x4000; secondary
- *
- * 44 8421|8421    hdd|hdb
- * 
- * 48 8421         hdd|hdc|hdb|hda udma enabled
- *
- *    0001         hda
- *    0010         hdb
- *    0100         hdc
- *    1000         hdd
- *
- * 4a 84|21        hdb|hda
- * 4b 84|21        hdd|hdc
+ *  Thanks to Daniela Egbert for advice on PIIX bugs.
+ */
+
+/*
+ * Intel PIIX/ICH and Efar Victory66 IDE driver for Linux.
  *
- *    ata-33/82371AB
- *    ata-33/82371EB
- *    ata-33/82801AB            ata-66/82801AA
- *    00|00 udma 0              00|00 reserved
- *    01|01 udma 1              01|01 udma 3
- *    10|10 udma 2              10|10 udma 4
- *    11|11 reserved            11|11 reserved
+ * UDMA66 and higher modes are autoenabled only in case the BIOS has detected a
+ * 80 wire cable. To ignore the BIOS data and assume the cable is present, use
+ * 'ide0=ata66' or 'ide1=ata66' on the kernel command line.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
  *
- * 54 8421|8421    ata66 drive|ata66 enable
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
  *
- * pci_read_config_word(HWIF(drive)->pci_dev, 0x40, &reg40);
- * pci_read_config_word(HWIF(drive)->pci_dev, 0x42, &reg42);
- * pci_read_config_word(HWIF(drive)->pci_dev, 0x44, &reg44);
- * pci_read_config_word(HWIF(drive)->pci_dev, 0x48, &reg48);
- * pci_read_config_word(HWIF(drive)->pci_dev, 0x4a, &reg4a);
- * pci_read_config_word(HWIF(drive)->pci_dev, 0x54, &reg54);
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
  */
 
 #include <linux/config.h>
-#include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/ioport.h>
+#include <linux/blkdev.h>
 #include <linux/pci.h>
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-#include <linux/delay.h>
 #include <linux/init.h>
-
+#include <linux/ide.h>
 #include <asm/io.h>
 
 #include "ata-timing.h"
 
-#define PIIX_DEBUG_DRIVE_INFO		0
+#define PIIX_IDETIM0		0x40
+#define PIIX_IDETIM1		0x42
+#define PIIX_SIDETIM		0x44
+#define PIIX_IDESTAT		0x47
+#define PIIX_UDMACTL		0x48
+#define PIIX_UDMATIM		0x4a
+#define PIIX_IDECFG		0x54
+
+#define PIIX_UDMA		0x07
+#define PIIX_UDMA_NONE		0x00
+#define PIIX_UDMA_33		0x01
+#define PIIX_UDMA_66		0x02
+#define PIIX_UDMA_V66		0x03
+#define PIIX_UDMA_100		0x04
+#define PIIX_NO_SITRE		0x08	/* Chip doesn't have separate slave timing */
+#define PIIX_PINGPONG		0x10	/* Enable ping-pong buffers */
+#define PIIX_VICTORY		0x20	/* Efar Victory66 has a different UDMA setup */
+#define PIIX_CHECK_REV		0x40	/* May be a buggy revision of PIIX */
+#define PIIX_NODMA		0x80	/* Don't do DMA with this chip */
 
-#define DISPLAY_PIIX_TIMINGS
+/*
+ * Intel IDE chips
+ */
+
+static struct piix_ide_chip {
+	unsigned short id;
+	unsigned char flags;
+} piix_ide_chips[] = {
+	{ PCI_DEVICE_ID_INTEL_82801CA_11,	PIIX_UDMA_100 | PIIX_PINGPONG },                    /* Intel 82801CA ICH3 */
+	{ PCI_DEVICE_ID_INTEL_82801CA_10,	PIIX_UDMA_100 | PIIX_PINGPONG },                    /* Intel 82801CAM ICH3-M */
+	{ PCI_DEVICE_ID_INTEL_82801BA_9,	PIIX_UDMA_100 | PIIX_PINGPONG },                    /* Intel 82801BA ICH2 */
+	{ PCI_DEVICE_ID_INTEL_82801BA_8,	PIIX_UDMA_100 | PIIX_PINGPONG },                    /* Intel 82801BAM ICH2-M */
+	{ PCI_DEVICE_ID_INTEL_82801AB_1,	PIIX_UDMA_33  | PIIX_PINGPONG },                    /* Intel 82801AB ICH0 */
+	{ PCI_DEVICE_ID_INTEL_82801AA_1,	PIIX_UDMA_66  | PIIX_PINGPONG },                    /* Intel 82801AA ICH */
+	{ PCI_DEVICE_ID_INTEL_82372FB_1,	PIIX_UDMA_66 },	                                    /* Intel 82372FB PIIX5 */
+	{ PCI_DEVICE_ID_INTEL_82443MX_1,	PIIX_UDMA_33 },                                     /* Intel 82443MX MPIIX4 */
+	{ PCI_DEVICE_ID_INTEL_82371AB,		PIIX_UDMA_33 },                                     /* Intel 82371AB/EB PIIX4/4E */
+	{ PCI_DEVICE_ID_INTEL_82371SB_1,	PIIX_UDMA_NONE },                                   /* Intel 82371SB PIIX3 */
+	{ PCI_DEVICE_ID_INTEL_82371FB_1,	PIIX_UDMA_NONE | PIIX_NO_SITRE | PIIX_CHECK_REV },  /* Intel 82371FB PIIX */
+	{ PCI_DEVICE_ID_EFAR_SLC90E66_1,	PIIX_UDMA_V66 | PIIX_VICTORY },                     /* Efar Victory66 */
+	{ 0 }
+};
+
+static struct piix_ide_chip *piix_config;
+static unsigned char piix_enabled;
+static unsigned int piix_80w;
+static unsigned int piix_clock;
+
+static char *piix_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA66", "UDMA100" };
+
+/*
+ * PIIX/ICH /proc entry.
+ */
+
+#ifdef CONFIG_PROC_FS
 
-#if defined(DISPLAY_PIIX_TIMINGS) && defined(CONFIG_PROC_FS)
 #include <linux/stat.h>
 #include <linux/proc_fs.h>
 
-static int piix_get_info(char *, char **, off_t, int);
-extern int (*piix_display_info)(char *, char **, off_t, int); /* ide-proc.c */
+byte piix_proc;
+int piix_base;
 static struct pci_dev *bmide_dev;
+extern int (*piix_display_info)(char *, char **, off_t, int); /* ide-proc.c */
+
+#define piix_print(format, arg...) p += sprintf(p, format "\n" , ## arg)
+#define piix_print_drive(name, format, arg...)\
+	p += sprintf(p, name); for (i = 0; i < 4; i++) p += sprintf(p, format, ## arg); p += sprintf(p, "\n");
 
-static int piix_get_info (char *buffer, char **addr, off_t offset, int count)
+static int piix_get_info(char *buffer, char **addr, off_t offset, int count)
 {
+	int speed[4], cycle[4], active[4], recover[4], dmaen[4], uen[4], udma[4], umul;
+	struct pci_dev *dev = bmide_dev;
+	unsigned int i, u;
+	unsigned short c, d, e;
+	unsigned char t;
 	char *p = buffer;
-	u32 bibma = pci_resource_start(bmide_dev, 4);
-        u16 reg40 = 0, psitre = 0, reg42 = 0, ssitre = 0;
-	u8  c0 = 0, c1 = 0;
-	u8  reg44 = 0, reg48 = 0, reg4a = 0, reg4b = 0, reg54 = 0, reg55 = 0;
-
-	if (bmide_dev->device == PCI_DEVICE_ID_INTEL_82371MX) {
-		p += sprintf(p, "\n                                Intel MPIIX Chipset.\n");
-		return p-buffer;	/* => must be less than 4k! */
+
+	piix_print("----------PIIX BusMastering IDE Configuration---------------");
+
+	piix_print("Driver Version:                     1.2");
+	piix_print("South Bridge:                       %s", bmide_dev->name);
+
+	pci_read_config_byte(dev, PCI_REVISION_ID, &t);
+	piix_print("Revision:                           IDE %#x", t);
+	piix_print("Highest DMA rate:                   %s", piix_config->flags & PIIX_NODMA ? "No DMA"
+								: piix_dma[piix_config->flags & PIIX_UDMA]);
+
+	piix_print("BM-DMA base:                        %#x", piix_base);
+	piix_print("PCI clock:                          %d.%dMHz", piix_clock / 1000, piix_clock / 100 % 10);
+
+	piix_print("-----------------------Primary IDE-------Secondary IDE------");
+
+	pci_read_config_word(dev, PIIX_IDETIM0, &d);
+	pci_read_config_word(dev, PIIX_IDETIM1, &e);
+	piix_print("Enabled:               %10s%20s", (d & 0x8000) ? "yes" : "no", (e & 0x8000) ? "yes" : "no");
+
+	c = inb(piix_base + 0x02) | (inb(piix_base + 0x0a) << 8);
+	piix_print("Simplex only:          %10s%20s", (c & 0x80) ? "yes" : "no", (c & 0x8000) ? "yes" : "no");
+
+	piix_print("Cable Type:            %10s%20s", (piix_80w & 1) ? "80w" : "40w", (piix_80w & 2) ? "80w" : "40w");
+
+	if (!piix_clock)
+                return p - buffer;
+
+	piix_print("-------------------drive0----drive1----drive2----drive3-----");
+
+	piix_print_drive("Prefetch+Post: ", "%10s", (((i & 2) ? d : e) & (1 << (2 + ((i & 1) << 2)))) ? "yes" : "no");
+
+	for (i = 0; i < 4; i++) {
+
+		pci_read_config_word(dev, PIIX_IDETIM0 + (i & 2), &d);
+		if (~piix_config->flags & PIIX_NO_SITRE)
+			pci_read_config_byte(dev, PIIX_SIDETIM, &t);
+
+		umul = 4;
+		udma[i] = uen[i] = 0;
+		active[i] = 12;
+		recover[i] = 18;
+
+		switch (i & 1) {
+			case 1: if (~d & 0x10) break;
+				if ((~piix_config->flags & PIIX_NO_SITRE) && (d & 0x4000)) {
+					active[i]  = 5 - ((t >> (((i & 2) << 1) + 2)) & 3); 
+					recover[i] = 4 - ((t >> (((i & 2) << 1) + 0)) & 3); 
+					break;
 				}
 
-	pci_read_config_word(bmide_dev, 0x40, &reg40);
-	pci_read_config_word(bmide_dev, 0x42, &reg42);
-	pci_read_config_byte(bmide_dev, 0x44, &reg44);
-	pci_read_config_byte(bmide_dev, 0x48, &reg48);
-	pci_read_config_byte(bmide_dev, 0x4a, &reg4a);
-	pci_read_config_byte(bmide_dev, 0x4b, &reg4b);
-	pci_read_config_byte(bmide_dev, 0x54, &reg54);
-	pci_read_config_byte(bmide_dev, 0x55, &reg55);
-
-	psitre = (reg40 & 0x4000) ? 1 : 0;
-	ssitre = (reg42 & 0x4000) ? 1 : 0;
-
-	/*
-	 * at that point bibma+0x2 et bibma+0xa are byte registers
-	 * to investigate:
-	 */
-	c0 = inb_p((unsigned short)bibma + 0x02);
-	c1 = inb_p((unsigned short)bibma + 0x0a);
-
-	p += sprintf(p, "\n                    %s Chipset.\n", bmide_dev->name);
-	p += sprintf(p, "--------------- Primary Channel ---------------- Secondary Channel -------------\n");
-	p += sprintf(p, "                %sabled                         %sabled\n",
-			(c0&0x80) ? "dis" : " en",
-			(c1&0x80) ? "dis" : " en");
-	p += sprintf(p, "--------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------\n");
-	p += sprintf(p, "DMA enabled:    %s              %s             %s               %s\n",
-			(c0&0x20) ? "yes" : "no ",
-			(c0&0x40) ? "yes" : "no ",
-			(c1&0x20) ? "yes" : "no ",
-			(c1&0x40) ? "yes" : "no " );
-	p += sprintf(p, "UDMA enabled:   %s              %s             %s               %s\n",
-			(reg48&0x01) ? "yes" : "no ",
-			(reg48&0x02) ? "yes" : "no ",
-			(reg48&0x04) ? "yes" : "no ",
-			(reg48&0x08) ? "yes" : "no " );
-	p += sprintf(p, "UDMA enabled:   %s                %s               %s                 %s\n",
-			((reg54&0x11) && (reg55&0x10) && (reg4a&0x01)) ? "5" :
-			((reg54&0x11) && (reg4a&0x02)) ? "4" :
-			((reg54&0x11) && (reg4a&0x01)) ? "3" :
-			(reg4a&0x02) ? "2" :
-			(reg4a&0x01) ? "1" :
-			(reg4a&0x00) ? "0" : "X",
-			((reg54&0x22) && (reg55&0x20) && (reg4a&0x10)) ? "5" :
-			((reg54&0x22) && (reg4a&0x20)) ? "4" :
-			((reg54&0x22) && (reg4a&0x10)) ? "3" :
-			(reg4a&0x20) ? "2" :
-			(reg4a&0x10) ? "1" :
-			(reg4a&0x00) ? "0" : "X",
-			((reg54&0x44) && (reg55&0x40) && (reg4b&0x03)) ? "5" :
-			((reg54&0x44) && (reg4b&0x02)) ? "4" :
-			((reg54&0x44) && (reg4b&0x01)) ? "3" :
-			(reg4b&0x02) ? "2" :
-			(reg4b&0x01) ? "1" :
-			(reg4b&0x00) ? "0" : "X",
-			((reg54&0x88) && (reg55&0x80) && (reg4b&0x30)) ? "5" :
-			((reg54&0x88) && (reg4b&0x20)) ? "4" :
-			((reg54&0x88) && (reg4b&0x10)) ? "3" :
-			(reg4b&0x20) ? "2" :
-			(reg4b&0x10) ? "1" :
-			(reg4b&0x00) ? "0" : "X");
-
-	p += sprintf(p, "UDMA\n");
-	p += sprintf(p, "DMA\n");
-	p += sprintf(p, "PIO\n");
+			case 0: if (~d & 0x01) break;
+				active[i] =  5 - ((d >> 12) & 3);
+				recover[i] = 4 - ((d >> 8) & 3);
+		}
 
-/*
- *	FIXME.... Add configuration junk data....blah blah......
- */
+		dmaen[i] = (c & ((i & 1) ? 0x40 : 0x20) << ((i & 2) << 2));
+		cycle[i] = 1000000 / piix_clock * (active[i] + recover[i]);
+		speed[i] = 2 * piix_clock / (active[i] + recover[i]);
 
-	return p-buffer;	 /* => must be less than 4k! */
-}
-#endif  /* defined(DISPLAY_PIIX_TIMINGS) && defined(CONFIG_PROC_FS) */
+		if (!(piix_config->flags & PIIX_UDMA))
+			continue;
 
-/*
- *  Used to set Fifo configuration via kernel command line:
- */
+		pci_read_config_byte(dev, PIIX_UDMACTL, &t);
+		uen[i]  = (t & (1 << i)) ? dmaen[i] : 0;
 
-byte piix_proc = 0;
+		if (!uen[i])
+			continue;
 
-extern char *ide_xfer_verbose (byte xfer_rate);
+		pci_read_config_word(dev, PIIX_UDMATIM, &e);
+		pci_read_config_dword(dev, PIIX_IDECFG, &u);
 
-#if defined(CONFIG_BLK_DEV_IDEDMA) && defined(CONFIG_PIIX_TUNING)
-/*
- *
- */
-static byte piix_dma_2_pio (byte xfer_rate) {
-	switch(xfer_rate) {
-		case XFER_UDMA_5:
-		case XFER_UDMA_4:
-		case XFER_UDMA_3:
-		case XFER_UDMA_2:
-		case XFER_UDMA_1:
-		case XFER_UDMA_0:
-		case XFER_MW_DMA_2:
-		case XFER_PIO_4:
-			return 4;
-		case XFER_MW_DMA_1:
-		case XFER_PIO_3:
-			return 3;
-		case XFER_SW_DMA_2:
-		case XFER_PIO_2:
-			return 2;
-		case XFER_MW_DMA_0:
-		case XFER_SW_DMA_1:
-		case XFER_SW_DMA_0:
-		case XFER_PIO_1:
-		case XFER_PIO_0:
-		case XFER_PIO_SLOW:
-		default:
-			return 0;
+		if (~piix_config->flags & PIIX_VICTORY) {
+			if ((piix_config->flags & PIIX_UDMA) >= PIIX_UDMA_66 && (u & (1 << i))) umul = 2;
+			if ((piix_config->flags & PIIX_UDMA) >= PIIX_UDMA_100 && (u & ((1 << i) + 12))) umul = 1;
+			udma[i] = (4 - ((e >> (i << 2)) & 3)) * umul;
+		} else  udma[i] = (8 - ((e >> (i << 2)) & 7)) * 2;
+
+		speed[i] = 8 * piix_clock / udma[i];
+		cycle[i] = 250000 * udma[i] / piix_clock;
 	}
+
+	piix_print_drive("Transfer Mode: ", "%10s", dmaen[i] ? (uen[i] ? "UDMA" : "DMA") : "PIO");
+
+	piix_print_drive("Address Setup: ", "%8dns", (1000000 / piix_clock) * 3);
+	piix_print_drive("Cmd Active:    ", "%8dns", (1000000 / piix_clock) * 12);
+	piix_print_drive("Cmd Recovery:  ", "%8dns", (1000000 / piix_clock) * 18);
+	piix_print_drive("Data Active:   ", "%8dns", (1000000 / piix_clock) * active[i]);
+	piix_print_drive("Data Recovery: ", "%8dns", (1000000 / piix_clock) * recover[i]);
+	piix_print_drive("Cycle Time:    ", "%8dns", cycle[i]);
+	piix_print_drive("Transfer Rate: ", "%4d.%dMB/s", speed[i] / 1000, speed[i] / 100 % 10);
+
+	return p - buffer;	/* hoping it is less than 4K... */
 }
-#endif /* defined(CONFIG_BLK_DEV_IDEDMA) && (CONFIG_PIIX_TUNING) */
+
+#endif
 
 /*
- *  Based on settings done by AMI BIOS
- *  (might be useful if drive is not registered in CMOS for any reason).
+ * piix_set_speed() writes timing values to the chipset registers
  */
-static void piix_tune_drive (ide_drive_t *drive, byte pio)
-{
-	unsigned long flags;
-	u16 master_data;
-	u8 slave_data;
-	int is_slave		= (&HWIF(drive)->drives[1] == drive);
-	int master_port		= HWIF(drive)->index ? 0x42 : 0x40;
-	int slave_port		= 0x44;
-				 /* ISP  RTC */
-	byte timings[][2]	= { { 0, 0 },
-				    { 0, 0 },
-				    { 1, 0 },
-				    { 2, 1 },
-				    { 2, 3 }, };
-
-	if (pio == 255)
-		pio = ata_timing_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0;
-	else
-		pio = min_t(byte, pio, 4);
-
-	pci_read_config_word(HWIF(drive)->pci_dev, master_port, &master_data);
-	if (is_slave) {
-		master_data = master_data | 0x4000;
-		if (pio > 1)
-			/* enable PPE, IE and TIME */
-			master_data = master_data | 0x0070;
-		pci_read_config_byte(HWIF(drive)->pci_dev, slave_port, &slave_data);
-		slave_data = slave_data & (HWIF(drive)->index ? 0x0f : 0xf0);
-		slave_data = slave_data | (((timings[pio][0] << 2) | timings[pio][1])
-					   << (HWIF(drive)->index ? 4 : 0));
-	} else {
-		master_data = master_data & 0xccf8;
-		if (pio > 1)
-			/* enable PPE, IE and TIME */
-			master_data = master_data | 0x0007;
-		master_data = master_data | (timings[pio][0] << 12) |
-			      (timings[pio][1] << 8);
-	}
-	save_flags(flags);
-	cli();
-	pci_write_config_word(HWIF(drive)->pci_dev, master_port, master_data);
-	if (is_slave)
-		pci_write_config_byte(HWIF(drive)->pci_dev, slave_port, slave_data);
-	restore_flags(flags);
-}
 
-#if defined(CONFIG_BLK_DEV_IDEDMA) && defined(CONFIG_PIIX_TUNING)
-static int piix_tune_chipset (ide_drive_t *drive, byte speed)
+static void piix_set_speed(struct pci_dev *dev, unsigned char dn, struct ata_timing *timing, int umul)
 {
-	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= hwif->pci_dev;
-	byte maslave		= hwif->channel ? 0x42 : 0x40;
-	int a_speed		= 3 << (drive->dn * 4);
-	int u_flag		= 1 << drive->dn;
-	int v_flag		= 0x01 << drive->dn;
-	int w_flag		= 0x10 << drive->dn;
-	int u_speed		= 0;
-	int err			= 0;
-	int			sitre;
-	short			reg4042, reg44, reg48, reg4a, reg54;
-	byte			reg55;
-
-	pci_read_config_word(dev, maslave, &reg4042);
-	sitre = (reg4042 & 0x4000) ? 1 : 0;
-	pci_read_config_word(dev, 0x44, &reg44);
-	pci_read_config_word(dev, 0x48, &reg48);
-	pci_read_config_word(dev, 0x4a, &reg4a);
-	pci_read_config_word(dev, 0x54, &reg54);
-	pci_read_config_byte(dev, 0x55, &reg55);
-
-	switch(speed) {
-		case XFER_UDMA_4:
-		case XFER_UDMA_2:	u_speed = 2 << (drive->dn * 4); break;
-		case XFER_UDMA_5:
-		case XFER_UDMA_3:
-		case XFER_UDMA_1:	u_speed = 1 << (drive->dn * 4); break;
-		case XFER_UDMA_0:	u_speed = 0 << (drive->dn * 4); break;
-		case XFER_MW_DMA_2:
-		case XFER_MW_DMA_1:
-		case XFER_SW_DMA_2:	break;
-		default:		return -1;
+	unsigned short t;
+	unsigned char u;
+	unsigned int c;
+
+	pci_read_config_word(dev, PIIX_IDETIM0 + (dn & 2), &t);
+
+	switch (dn & 1) {
+
+		case 1: 
+			if (timing->cycle > 9) {
+				t &= ~0x30;
+				break;
 			}
 
-	if (speed >= XFER_UDMA_0) {
-		if (!(reg48 & u_flag))
-			pci_write_config_word(dev, 0x48, reg48|u_flag);
-		if (speed == XFER_UDMA_5) {
-			pci_write_config_byte(dev, 0x55, (byte) reg55|w_flag);
-		} else {
-			pci_write_config_byte(dev, 0x55, (byte) reg55 & ~w_flag);
+			if (~piix_config->flags & PIIX_NO_SITRE) {
+				pci_read_config_byte(dev, PIIX_SIDETIM, &u);
+				u &= ~(0xf << ((dn & 2) << 1));
+				t |= 0x30;
+				u |= (4 - FIT(timing->recover, 1, 4)) << ((dn & 2) << 1);
+				u |= (5 - FIT(timing->active, 2, 5)) << (((dn & 2) << 1) + 2);
+				pci_write_config_byte(dev, PIIX_SIDETIM, u);
+				break;
 			}
-		if (!(reg4a & u_speed)) {
-			pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
-			pci_write_config_word(dev, 0x4a, reg4a|u_speed);
+
+		case 0:
+			if ((~dn & 1) && timing->cycle > 9) {
+				t &= ~0x03;
+				break;
 			}
-		if (speed > XFER_UDMA_2) {
-			if (!(reg54 & v_flag)) {
-				pci_write_config_word(dev, 0x54, reg54|v_flag);
+
+			t &= 0xccff;
+			t |= 0x03 << ((dn & 1) << 2);
+			t |= (4 - FIT(timing->recover, 1, 4)) << 8;
+			t |= (5 - FIT(timing->active, 2, 5)) << 12;
 	}
+
+	pci_write_config_word(dev, PIIX_IDETIM0 + (dn & 2), t);
+
+	if (!(piix_config->flags & PIIX_UDMA)) return;
+
+	pci_read_config_byte(dev, PIIX_UDMACTL, &u);
+	u &= ~(1 << dn);
+
+	if (timing->udma) {
+
+		u |= 1 << dn;
+
+		pci_read_config_word(dev, PIIX_UDMATIM, &t);
+
+		if (piix_config->flags & PIIX_VICTORY) {
+			t &= ~(0x07 << (dn << 2));
+			t |= (8 - FIT(timing->udma, 2, 8)) << (dn << 2);
 		} else {
-			pci_write_config_word(dev, 0x54, reg54 & ~v_flag);
+			t &= ~(0x03 << (dn << 2));
+			t |= (4 - FIT(timing->udma, 2, 4)) << (dn << 2);
 		}
+
+		pci_write_config_word(dev, PIIX_UDMATIM, t);
+
+		if ((piix_config->flags & PIIX_UDMA) > PIIX_UDMA_33
+			&& ~piix_config->flags & PIIX_VICTORY) {
+
+			pci_read_config_dword(dev, PIIX_IDECFG, &c);
+			
+			if ((piix_config->flags & PIIX_UDMA) > PIIX_UDMA_66)
+				c &= ~(1 << (dn + 12));
+			c &= ~(1 << dn);
+
+			switch (umul) {
+				case 2: c |= 1 << dn;		break;
+				case 4: c |= 1 << (dn + 12);	break;
+			}
+
+			pci_write_config_dword(dev, PIIX_IDECFG, c);
 		}
-	if (speed < XFER_UDMA_0) {
-		if (reg48 & u_flag)
-			pci_write_config_word(dev, 0x48, reg48 & ~u_flag);
-		if (reg4a & a_speed)
-			pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
-		if (reg54 & v_flag)
-			pci_write_config_word(dev, 0x54, reg54 & ~v_flag);
-		if (reg55 & w_flag)
-			pci_write_config_byte(dev, 0x55, (byte) reg55 & ~w_flag);
 	}
 
-	piix_tune_drive(drive, piix_dma_2_pio(speed));
+	pci_write_config_byte(dev, PIIX_UDMACTL, u);
+}
+
+/*
+ * piix_set_drive() computes timing values configures the drive and
+ * the chipset to a desired transfer mode. It also can be called
+ * by upper layers.
+ */
+
+static int piix_set_drive(ide_drive_t *drive, unsigned char speed)
+{
+	ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
+	struct ata_timing t, p;
+	int err, T, UT, umul;
+
+	if (speed != XFER_PIO_SLOW && speed != drive->current_speed)
+		if ((err = ide_config_drive_speed(drive, speed)))
+			return err;
+
+	umul =  min((speed > XFER_UDMA_4) ? 4 : ((speed > XFER_UDMA_2) ? 2 : 1),
+		piix_config->flags & PIIX_UDMA);
+
+	if (piix_config->flags & PIIX_VICTORY)
+		umul = 2;
+
+	T = 1000000000 / piix_clock;
+	UT = T / umul;
+
+	ata_timing_compute(drive, speed, &t, T, UT);
+
+	if ((piix_config->flags & PIIX_NO_SITRE) && peer->present) {
+			ata_timing_compute(peer, peer->current_speed, &p, T, UT);
+			if (t.cycle <= 9 && p.cycle <= 9)
+				ata_timing_merge(&p, &t, &t, IDE_TIMING_ALL);
+	}
+
+	piix_set_speed(HWIF(drive)->pci_dev, drive->dn, &t, umul);
 
-#if PIIX_DEBUG_DRIVE_INFO
-	printk("%s: %s drive%d\n", drive->name, ide_xfer_verbose(speed), drive->dn);
-#endif /* PIIX_DEBUG_DRIVE_INFO */
 	if (!drive->init_speed)	
 		drive->init_speed = speed;
-	err = ide_config_drive_speed(drive, speed);
 	drive->current_speed = speed;
-	return err;
+
+	return 0;
 }
 
-static int piix_config_drive_for_dma (ide_drive_t *drive)
+/*
+ * piix_tune_drive() is a callback from upper layers for
+ * PIO-only tuning.
+ */
+
+static void piix_tune_drive(ide_drive_t *drive, unsigned char pio)
 {
-	struct hd_driveid *id	= drive->id;
-	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= hwif->pci_dev;
-	byte			speed;
-
-	byte udma_66		= eighty_ninty_three(drive);
-	int ultra100		= ((dev->device == PCI_DEVICE_ID_INTEL_82801BA_8) ||
-				   (dev->device == PCI_DEVICE_ID_INTEL_82801BA_9) ||
-				   (dev->device == PCI_DEVICE_ID_INTEL_82801CA_10)) ? 1 : 0;
-	int ultra66		= ((ultra100) ||
-				   (dev->device == PCI_DEVICE_ID_INTEL_82801AA_1) ||
-				   (dev->device == PCI_DEVICE_ID_INTEL_82372FB_1)) ? 1 : 0;
-	int ultra		= ((ultra66) ||
-				   (dev->device == PCI_DEVICE_ID_INTEL_82371AB) ||
-				   (dev->device == PCI_DEVICE_ID_INTEL_82443MX_1) ||
-				   (dev->device == PCI_DEVICE_ID_INTEL_82451NX) ||
-				   (dev->device == PCI_DEVICE_ID_INTEL_82801AB_1)) ? 1 : 0;
-
-	speed = ata_timing_mode(drive, XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA
-					| (ultra ? XFER_UDMA : 0) | ((udma_66 & ultra66) ? XFER_UDMA_66 : 0)
-					| ((udma_66 & ultra100) ? XFER_UDMA_100 : 0));
-
-	(void) piix_tune_chipset(drive, speed);
-
-	return ((int)	((id->dma_ultra >> 11) & 7) ? ide_dma_on :
-			((id->dma_ultra >> 8) & 7) ? ide_dma_on :
-			((id->dma_mword >> 8) & 7) ? ide_dma_on :
-			((id->dma_1word >> 8) & 7) ? ide_dma_on :
-						     ide_dma_off_quietly);
+	if (!((piix_enabled >> HWIF(drive)->channel) & 1))
+		return;
+
+	if (pio == 255) {
+		piix_set_drive(drive, ata_timing_mode(drive, XFER_PIO | XFER_EPIO));
+		return;
+	}
+
+	piix_set_drive(drive, XFER_PIO_0 + min_t(byte, pio, 5));
 }
 
-static void config_chipset_for_pio (ide_drive_t *drive)
+#ifdef CONFIG_BLK_DEV_IDEDMA
+
+/*
+ * piix_dmaproc() is a callback from upper layers that can do
+ * a lot, but we use it for DMA/PIO tuning only, delegating everything
+ * else to the default ide_dmaproc().
+ */
+
+int piix_dmaproc(ide_dma_action_t func, ide_drive_t *drive)
 {
-	piix_tune_drive(drive, ata_timing_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0);
+
+	if (func == ide_dma_check) {
+
+		short w80 = HWIF(drive)->udma_four;
+
+		short speed = ata_timing_mode(drive,
+			XFER_PIO | XFER_EPIO | 
+			(piix_config->flags & PIIX_NODMA ? 0 : (XFER_SWDMA | XFER_MWDMA |
+			(piix_config->flags & PIIX_UDMA ? XFER_UDMA : 0) |
+			(w80 && (piix_config->flags & PIIX_UDMA) >= PIIX_UDMA_66 ? XFER_UDMA_66 : 0) |
+			(w80 && (piix_config->flags & PIIX_UDMA) >= PIIX_UDMA_100 ? XFER_UDMA_100 : 0))));
+
+		piix_set_drive(drive, speed);
+
+		func = (HWIF(drive)->autodma && (speed & XFER_MODE) != XFER_PIO)
+			? ide_dma_on : ide_dma_off_quietly;
+
+	}
+
+	return ide_dmaproc(func, drive);
 }
 
-static int config_drive_xfer_rate (ide_drive_t *drive)
+#endif /* CONFIG_BLK_DEV_IDEDMA */
+
+/*
+ * The initialization callback. Here we determine the IDE chip type
+ * and initialize its drive independent registers.
+ */
+
+unsigned int __init pci_init_piix(struct pci_dev *dev, const char *name)
 {
-	struct hd_driveid *id = drive->id;
-	ide_dma_action_t dma_func = ide_dma_on;
-
-	if (id && (id->capability & 1) && HWIF(drive)->autodma) {
-		/* Consult the list of known "bad" drives */
-		if (ide_dmaproc(ide_dma_bad_drive, drive)) {
-			dma_func = ide_dma_off;
-			goto fast_ata_pio;
+	unsigned int u;
+	unsigned short w;
+	unsigned char t;
+	int i;
+
+/*
+ * Find out which Intel IDE this is.
+ */
+
+	for (piix_config = piix_ide_chips; piix_config->id != 0; ++piix_config)
+		if (dev->device == piix_config->id)
+			break;
+
+	if (!piix_config->id) {
+		printk(KERN_WARNING "PIIX: Unknown PIIX/ICH chip %#x, contact Vojtech Pavlik <vojtech@ucw.cz>\n", dev->device);
+		return -ENODEV;
 	}
-		dma_func = ide_dma_off_quietly;
-		if (id->field_valid & 4) {
-			if (id->dma_ultra & 0x003F) {
-				/* Force if Capable UltraDMA */
-				dma_func = piix_config_drive_for_dma(drive);
-				if ((id->field_valid & 2) &&
-				    (dma_func != ide_dma_on))
-					goto try_dma_modes;
+
+/*
+ * Check for possibly broken DMA configs.
+ */
+
+	{
+		struct pci_dev *orion = NULL;
+
+		if (piix_config->flags & PIIX_CHECK_REV) {
+			pci_read_config_byte(dev, PCI_REVISION_ID, &t);
+			if (t < 2) {
+				printk(KERN_INFO "PIIX: Found buggy old PIIX rev %#x, disabling DMA\n", t);
+				piix_config->flags |= PIIX_NODMA;
 			}
-		} else if (id->field_valid & 2) {
-try_dma_modes:
-			if ((id->dma_mword & 0x0007) ||
-			    (id->dma_1word & 0x007)) {
-				/* Force if Capable regular DMA modes */
-				dma_func = piix_config_drive_for_dma(drive);
-				if (dma_func != ide_dma_on)
-					goto no_dma_set;
 		}
-		} else if (ide_dmaproc(ide_dma_good_drive, drive)) {
-			if (id->eide_dma_time > 150) {
-				goto no_dma_set;
+
+		if ((orion = pci_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454GX, NULL))) {
+			pci_read_config_byte(orion, PCI_REVISION_ID, &t);
+			if (t < 4) {
+				printk(KERN_INFO "PIIX: Found buggy 82454GX Orion bridge rev %#x, disabling DMA\n", t);
+				piix_config->flags |= PIIX_NODMA;
 			}
-			/* Consult the list of known "good" drives */
-			dma_func = piix_config_drive_for_dma(drive);
-			if (dma_func != ide_dma_on)
-				goto no_dma_set;
-		} else {
-			goto fast_ata_pio;
 		}
-	} else if ((id->capability & 8) || (id->field_valid & 2)) {
-fast_ata_pio:
-		dma_func = ide_dma_off_quietly;
-no_dma_set:
-		config_chipset_for_pio(drive);
 	}
-	return HWIF(drive)->dmaproc(dma_func, drive);
-}
 
-static int piix_dmaproc(ide_dma_action_t func, ide_drive_t *drive)
-{
-	switch (func) {
-		case ide_dma_check:
-			return config_drive_xfer_rate(drive);
-		default :
+/*
+ * Check 80-wire cable presence.
+ */
+
+	switch (piix_config->flags & PIIX_UDMA) {
+
+		case PIIX_UDMA_66:
+		case PIIX_UDMA_100:
+			pci_read_config_dword(dev, PIIX_IDECFG, &u);
+			piix_80w = ((u & 0x30) ? 1 : 0) | ((u & 0xc0) ? 2 : 0);
+			break;
+
+		case PIIX_UDMA_V66:
+			pci_read_config_byte(dev, PIIX_IDESTAT, &t);
+			piix_80w = ((t & 2) ? 1 : 0) | ((t & 1) ? 2 : 0);
 			break;
 	}
-	/* Other cases are done by generic IDE-DMA code. */
-	return ide_dmaproc(func, drive);
-}
-#endif /* defined(CONFIG_BLK_DEV_IDEDMA) && (CONFIG_PIIX_TUNING) */
 
-unsigned int __init pci_init_piix(struct pci_dev *dev)
-{
-#if defined(DISPLAY_PIIX_TIMINGS) && defined(CONFIG_PROC_FS)
-	if (!piix_proc) {
-		piix_proc = 1;
-		bmide_dev = dev;
-		piix_display_info = &piix_get_info;
+/*
+ * Enable ping-pong buffers where applicable.
+ */
+
+	if (piix_config->flags & PIIX_PINGPONG) {
+		pci_read_config_dword(dev, PIIX_IDECFG, &u);
+		u |= 0x400; 
+		pci_write_config_dword(dev, PIIX_IDECFG, u);
 	}
-#endif /* DISPLAY_PIIX_TIMINGS && CONFIG_PROC_FS */
-	return 0;
-}
 
 /*
- * Sheesh, someone at Intel needs to go read the ATA-4/5 T13 standards.
- * It does not specify device detection, but channel!!!
- * You determine later if bit 13 of word93 is set...
+ * Detect enabled interfaces, enable slave separate timing if possible.
  */
-unsigned int __init ata66_piix (ide_hwif_t *hwif)
-{
-	byte reg54h = 0, reg55h = 0, ata66 = 0;
-	byte mask = hwif->channel ? 0xc0 : 0x30;
 
-	pci_read_config_byte(hwif->pci_dev, 0x54, &reg54h);
-	pci_read_config_byte(hwif->pci_dev, 0x55, &reg55h);
+	for (i = 0; i < 2; i++) {
+		pci_read_config_word(dev, PIIX_IDETIM0 + (i << 1), &w);
+		piix_enabled |= (w & 0x8000) ? (1 << i) : 0;
+		w &= 0x8c00;
+		if (~piix_config->flags & PIIX_NO_SITRE) w |= 0x4000;
+		w |= 0x44;
+		pci_write_config_word(dev, PIIX_IDETIM0 + (i << 1), w);
+	}
+
+/*
+ * Determine the system bus clock.
+ */
+
+	piix_clock = system_bus_speed * 1000;
+
+	switch (piix_clock) {
+		case 33000: piix_clock = 33333; break;
+		case 37000: piix_clock = 37500; break;
+		case 41000: piix_clock = 41666; break;
+	}
+
+	if (piix_clock < 20000 || piix_clock > 50000) {
+		printk(KERN_WARNING "PIIX: User given PCI clock speed impossible (%d), using 33 MHz instead.\n", piix_clock);
+		printk(KERN_WARNING "PIIX: Use ide0=ata66 if you want to assume 80-wire cable\n");
+		piix_clock = 33333;
+	}
+
+/*
+ * Print the boot message.
+ */
+
+	printk(KERN_INFO "PIIX: %s %s controller on pci%s\n",
+		dev->name, piix_dma[piix_config->flags & PIIX_UDMA], dev->slot_name);
+
+/*
+ * Register /proc/ide/piix entry
+ */
 
-	ata66 = (reg54h & mask) ? 1 : 0;
+#ifdef CONFIG_PROC_FS
+	if (!piix_proc) {
+		piix_base = pci_resource_start(dev, 4);
+		bmide_dev = dev;
+		piix_display_info = &piix_get_info;
+		piix_proc = 1;
+	}
+#endif
 
-	return ata66;
+	return 0;
 }
 
-void __init ide_init_piix (ide_hwif_t *hwif)
+unsigned int __init ata66_piix(ide_hwif_t *hwif)
 {
-#ifndef CONFIG_IA64
-	if (!hwif->irq)
-		hwif->irq = hwif->channel ? 15 : 14;
-#endif /* CONFIG_IA64 */
+	return ((piix_enabled & piix_80w) >> hwif->channel) & 1;
+}
 
-	if (hwif->pci_dev->device == PCI_DEVICE_ID_INTEL_82371MX) {
-		/* This is a painful system best to let it self tune for now */
-		return;
-	}
+void __init ide_init_piix(ide_hwif_t *hwif)
+{
+	int i;
 
 	hwif->tuneproc = &piix_tune_drive;
-	hwif->drives[0].autotune = 1;
-	hwif->drives[1].autotune = 1;
+	hwif->speedproc = &piix_set_drive;
+	hwif->autodma = 0;
 
-	if (!hwif->dma_base)
-		return;
+	for (i = 0; i < 2; i++) {
+		hwif->drives[i].io_32bit = 1;
+		hwif->drives[i].unmask = 1;
+		hwif->drives[i].autotune = 1;
+		hwif->drives[i].dn = hwif->channel * 2 + i;
+	}
 
+#ifdef CONFIG_BLK_DEV_IDEDMA
+	if (hwif->dma_base) {
 		hwif->highmem = 1;
-#ifndef CONFIG_BLK_DEV_IDEDMA
-	hwif->autodma = 0;
-#else /* CONFIG_BLK_DEV_IDEDMA */
-#ifdef CONFIG_PIIX_TUNING
+		hwif->dmaproc = &piix_dmaproc;
+#ifdef CONFIG_IDEDMA_AUTO
 		if (!noautodma)
 			hwif->autodma = 1;
-	hwif->dmaproc = &piix_dmaproc;
-	hwif->speedproc = &piix_tune_chipset;
-#endif /* CONFIG_PIIX_TUNING */
-#endif /* !CONFIG_BLK_DEV_IDEDMA */
+#endif
+	}
+#endif /* CONFIG_BLK_DEV_IDEDMA */
+}
+
+/*
+ * We allow the BM-DMA driver only work on enabled interfaces,
+ * and only if DMA is safe with the chip and bridge.
+ */
+
+void __init ide_dmacapable_piix(ide_hwif_t *hwif, unsigned long dmabase)
+{
+	if (((piix_enabled >> hwif->channel) & 1)
+		&& !(piix_config->flags & PIIX_NODMA))
+			ide_setup_dma(hwif, dmabase, 8);
 }

drivers/ide/slc90e66.c

-/*
- *  linux/drivers/ide/slc90e66.c	Version 0.10	October 4, 2000
- *
- *  Copyright (C) 2000 Andre Hedrick <andre@linux-ide.org>
- *  May be copied or modified under the terms of the GNU General Public License
- *
- * 00:07.1 IDE interface: EFAR Microsystems:
- * 		Unknown device 9130 (prog-if 8a [Master SecP PriP])
- * Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV-
- * 		VGASnoop- ParErr- Stepping- SERR- FastB2B-
- * Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
- * 		>TAbort- <TAbort- <MAbort- >SERR- <PERR-
- * Latency: 64
- * Interrupt: pin A routed to IRQ 255
- * Region 4: I/O ports at 1050
- *
- * 00: 55 10 30 91 05 00 00 02 00 8a 01 01 00 40 00 00
- * 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- * 20: 51 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- * 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 00 00
- * 40: 37 e3 33 e3 b9 55 01 00 0d 00 04 22 00 00 00 00
- * 50: 00 00 ff a0 00 00 00 08 40 00 00 00 00 00 00 00
- * 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- * 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- * 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- * 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- * a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- * b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- * c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- * d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- * e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- * f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- *
- * This a look-a-like variation of the ICH0 PIIX4 Ultra-66,
- * but this keeps the ISA-Bridge and slots alive.
- *
- */
-
-#include <linux/config.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#include "ata-timing.h"
-
-#define SLC90E66_DEBUG_DRIVE_INFO		0
-
-#define DISPLAY_SLC90E66_TIMINGS
-
-#if defined(DISPLAY_SLC90E66_TIMINGS) && defined(CONFIG_PROC_FS)
-#include <linux/stat.h>
-#include <linux/proc_fs.h>
-
-static int slc90e66_get_info(char *, char **, off_t, int);
-extern int (*slc90e66_display_info)(char *, char **, off_t, int); /* ide-proc.c */
-static struct pci_dev *bmide_dev;
-
-static int slc90e66_get_info (char *buffer, char **addr, off_t offset, int count)
-{
-	char *p = buffer;
-	u32 bibma = pci_resource_start(bmide_dev, 4);
-        u16 reg40 = 0, psitre = 0, reg42 = 0, ssitre = 0;
-	u8  c0 = 0, c1 = 0;
-	u8  reg44 = 0, reg47 = 0, reg48 = 0, reg4a = 0, reg4b = 0;
-
-	pci_read_config_word(bmide_dev, 0x40, &reg40);
-	pci_read_config_word(bmide_dev, 0x42, &reg42);
-	pci_read_config_byte(bmide_dev, 0x44, &reg44);
-	pci_read_config_byte(bmide_dev, 0x47, &reg47);
-	pci_read_config_byte(bmide_dev, 0x48, &reg48);
-	pci_read_config_byte(bmide_dev, 0x4a, &reg4a);
-	pci_read_config_byte(bmide_dev, 0x4b, &reg4b);
-
-	psitre = (reg40 & 0x4000) ? 1 : 0;
-	ssitre = (reg42 & 0x4000) ? 1 : 0;
-
-        /*
-         * at that point bibma+0x2 et bibma+0xa are byte registers
-         * to investigate:
-         */
-#ifdef __mips__	/* only for mips? */
-	c0 = inb_p(bibma + 0x02);
-	c1 = inb_p(bibma + 0x0a);
-#else
-	c0 = inb_p((unsigned short)bibma + 0x02);
-	c1 = inb_p((unsigned short)bibma + 0x0a);
-#endif
-
-	p += sprintf(p, "                                SLC90E66 Chipset.\n");
-	p += sprintf(p, "--------------- Primary Channel ---------------- Secondary Channel -------------\n");
-	p += sprintf(p, "                %sabled                         %sabled\n",
-			(c0&0x80) ? "dis" : " en",
-			(c1&0x80) ? "dis" : " en");
-	p += sprintf(p, "--------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------\n");
-	p += sprintf(p, "DMA enabled:    %s              %s             %s               %s\n",
-			(c0&0x20) ? "yes" : "no ",
-			(c0&0x40) ? "yes" : "no ",
-			(c1&0x20) ? "yes" : "no ",
-			(c1&0x40) ? "yes" : "no " );
-	p += sprintf(p, "UDMA enabled:   %s              %s             %s               %s\n",
-			(reg48&0x01) ? "yes" : "no ",
-			(reg48&0x02) ? "yes" : "no ",
-			(reg48&0x04) ? "yes" : "no ",
-			(reg48&0x08) ? "yes" : "no " );
-	p += sprintf(p, "UDMA enabled:   %s                %s               %s                 %s\n",
-			((reg4a&0x04)==0x04) ? "4" :
-			((reg4a&0x03)==0x03) ? "3" :
-			(reg4a&0x02) ? "2" :
-			(reg4a&0x01) ? "1" :
-			(reg4a&0x00) ? "0" : "X",
-			((reg4a&0x40)==0x40) ? "4" :
-			((reg4a&0x30)==0x30) ? "3" :
-			(reg4a&0x20) ? "2" :
-			(reg4a&0x10) ? "1" :
-			(reg4a&0x00) ? "0" : "X",
-			((reg4b&0x04)==0x04) ? "4" :
-			((reg4b&0x03)==0x03) ? "3" :
-			(reg4b&0x02) ? "2" :
-			(reg4b&0x01) ? "1" :
-			(reg4b&0x00) ? "0" : "X",
-			((reg4b&0x40)==0x40) ? "4" :
-			((reg4b&0x30)==0x30) ? "3" :
-			(reg4b&0x20) ? "2" :
-			(reg4b&0x10) ? "1" :
-			(reg4b&0x00) ? "0" : "X");
-
-	p += sprintf(p, "UDMA\n");
-	p += sprintf(p, "DMA\n");
-	p += sprintf(p, "PIO\n");
-
-/*
- *	FIXME.... Add configuration junk data....blah blah......
- */
-
-	return p-buffer;	 /* => must be less than 4k! */
-}
-#endif  /* defined(DISPLAY_SLC90E66_TIMINGS) && defined(CONFIG_PROC_FS) */
-
-/*
- *  Used to set Fifo configuration via kernel command line:
- */
-
-byte slc90e66_proc = 0;
-
-extern char *ide_xfer_verbose (byte xfer_rate);
-
-#ifdef CONFIG_BLK_DEV_IDEDMA
-/*
- *
- */
-static byte slc90e66_dma_2_pio (byte xfer_rate) {
-	switch(xfer_rate) {
-		case XFER_UDMA_4:
-		case XFER_UDMA_3:
-		case XFER_UDMA_2:
-		case XFER_UDMA_1:
-		case XFER_UDMA_0:
-		case XFER_MW_DMA_2:
-		case XFER_PIO_4:
-			return 4;
-		case XFER_MW_DMA_1:
-		case XFER_PIO_3:
-			return 3;
-		case XFER_SW_DMA_2:
-		case XFER_PIO_2:
-			return 2;
-		case XFER_MW_DMA_0:
-		case XFER_SW_DMA_1:
-		case XFER_SW_DMA_0:
-		case XFER_PIO_1:
-		case XFER_PIO_0:
-		case XFER_PIO_SLOW:
-		default:
-			return 0;
-	}
-}
-#endif /* CONFIG_BLK_DEV_IDEDMA */
-
-/*
- *  Based on settings done by AMI BIOS
- *  (might be useful if drive is not registered in CMOS for any reason).
- */
-static void slc90e66_tune_drive (ide_drive_t *drive, byte pio)
-{
-	unsigned long flags;
-	u16 master_data;
-	byte slave_data;
-	int is_slave		= (&HWIF(drive)->drives[1] == drive);
-	int master_port		= HWIF(drive)->index ? 0x42 : 0x40;
-	int slave_port		= 0x44;
-				 /* ISP  RTC */
-	byte timings[][2]	= { { 0, 0 },
-				    { 0, 0 },
-				    { 1, 0 },
-				    { 2, 1 },
-				    { 2, 3 }, };
-
-	if (pio == 255)
-		pio = ata_timing_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0;
-	else
-		pio = min_t(byte, pio, 4);
-
-	pci_read_config_word(HWIF(drive)->pci_dev, master_port, &master_data);
-	if (is_slave) {
-		master_data = master_data | 0x4000;
-		if (pio > 1)
-			/* enable PPE, IE and TIME */
-			master_data = master_data | 0x0070;
-		pci_read_config_byte(HWIF(drive)->pci_dev, slave_port, &slave_data);
-		slave_data = slave_data & (HWIF(drive)->index ? 0x0f : 0xf0);
-		slave_data = slave_data | ((timings[pio][0] << 2) | (timings[pio][1]
-					   << (HWIF(drive)->index ? 4 : 0)));
-	} else {
-		master_data = master_data & 0xccf8;
-		if (pio > 1)
-			/* enable PPE, IE and TIME */
-			master_data = master_data | 0x0007;
-		master_data = master_data | (timings[pio][0] << 12) |
-			      (timings[pio][1] << 8);
-	}
-	save_flags(flags);
-	cli();
-	pci_write_config_word(HWIF(drive)->pci_dev, master_port, master_data);
-	if (is_slave)
-		pci_write_config_byte(HWIF(drive)->pci_dev, slave_port, slave_data);
-	restore_flags(flags);
-}
-
-#ifdef CONFIG_BLK_DEV_IDEDMA
-static int slc90e66_tune_chipset (ide_drive_t *drive, byte speed)
-{
-	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= hwif->pci_dev;
-	byte maslave		= hwif->channel ? 0x42 : 0x40;
-	int a_speed		= 7 << (drive->dn * 4);
-	int u_flag		= 1 << drive->dn;
-	int u_speed		= 0;
-	int err			= 0;
-	int			sitre;
-	short			reg4042, reg44, reg48, reg4a;
-
-	pci_read_config_word(dev, maslave, &reg4042);
-	sitre = (reg4042 & 0x4000) ? 1 : 0;
-	pci_read_config_word(dev, 0x44, &reg44);
-	pci_read_config_word(dev, 0x48, &reg48);
-	pci_read_config_word(dev, 0x4a, &reg4a);
-
-	switch(speed) {
-		case XFER_UDMA_4:	u_speed = 4 << (drive->dn * 4); break;
-		case XFER_UDMA_3:	u_speed = 3 << (drive->dn * 4); break;
-		case XFER_UDMA_2:	u_speed = 2 << (drive->dn * 4); break;
-		case XFER_UDMA_1:	u_speed = 1 << (drive->dn * 4); break;
-		case XFER_UDMA_0:	u_speed = 0 << (drive->dn * 4); break;
-		case XFER_MW_DMA_2:
-		case XFER_MW_DMA_1:
-		case XFER_SW_DMA_2:	break;
-#if 0	/* allow PIO modes */
-		default:		return -1;
-#endif
-	}
-
-	if (speed >= XFER_UDMA_0) {
-		if (!(reg48 & u_flag))
-			pci_write_config_word(dev, 0x48, reg48|u_flag);
-		if ((reg4a & u_speed) != u_speed) {
-			pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
-			pci_read_config_word(dev, 0x4a, &reg4a);
-			pci_write_config_word(dev, 0x4a, reg4a|u_speed);
-		}
-	}
-	if (speed < XFER_UDMA_0) {
-		if (reg48 & u_flag)
-			pci_write_config_word(dev, 0x48, reg48 & ~u_flag);
-		if (reg4a & a_speed)
-			pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
-	}
-
-	slc90e66_tune_drive(drive, slc90e66_dma_2_pio(speed));
-
-#if SLC90E66_DEBUG_DRIVE_INFO
-	printk("%s: %s drive%d\n", drive->name, ide_xfer_verbose(speed), drive->dn);
-#endif /* SLC90E66_DEBUG_DRIVE_INFO */
-	if (!drive->init_speed)
-		drive->init_speed = speed;
-	err = ide_config_drive_speed(drive, speed);
-	drive->current_speed = speed;
-	return err;
-}
-
-static int slc90e66_config_drive_for_dma (ide_drive_t *drive)
-{
-	struct hd_driveid *id	= drive->id;
-	int ultra		= 1;
-	byte speed		= 0;
-	byte udma_66		= eighty_ninty_three(drive);
-
-#if 1 /* allow PIO modes */
-	if (!HWIF(drive)->autodma) {
-		speed = ata_timing_mode(drive, XFER_PIO | XFER_EPIO);
-		(void) slc90e66_tune_chipset(drive, speed);
-		return ((int) ide_dma_off_quietly);
-	}
-#endif
-
-	speed = ata_timing_mode(drive, XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA 
-					| (ultra ? XFER_UDMA : 0) | ((ultra && udma_66) ? XFER_UDMA_66 : 0));
-
-	(void) slc90e66_tune_chipset(drive, speed);
-
-	return ((int)	((id->dma_ultra >> 11) & 7) ? ide_dma_on :
-			((id->dma_ultra >> 8) & 7) ? ide_dma_on :
-			((id->dma_mword >> 8) & 7) ? ide_dma_on :
-			((id->dma_1word >> 8) & 7) ? ide_dma_on :
-						     ide_dma_off_quietly);
-}
-
-static int slc90e66_dmaproc(ide_dma_action_t func, ide_drive_t *drive)
-{
-	switch (func) {
-		case ide_dma_check:
-			 return ide_dmaproc((ide_dma_action_t) slc90e66_config_drive_for_dma(drive), drive);
-		default :
-			break;
-	}
-	/* Other cases are done by generic IDE-DMA code. */
-	return ide_dmaproc(func, drive);
-}
-#endif /* CONFIG_BLK_DEV_IDEDMA */
-
-unsigned int __init pci_init_slc90e66(struct pci_dev *dev)
-{
-#if defined(DISPLAY_SLC90E66_TIMINGS) && defined(CONFIG_PROC_FS)
-	if (!slc90e66_proc) {
-		slc90e66_proc = 1;
-		bmide_dev = dev;
-		slc90e66_display_info = &slc90e66_get_info;
-	}
-#endif /* DISPLAY_SLC90E66_TIMINGS && CONFIG_PROC_FS */
-	return 0;
-}
-
-unsigned int __init ata66_slc90e66 (ide_hwif_t *hwif)
-{
-#if 1
-	byte reg47 = 0, ata66 = 0;
-	byte mask = hwif->channel ? 0x01 : 0x02;	/* bit0:Primary */
-
-	pci_read_config_byte(hwif->pci_dev, 0x47, &reg47);
-
-	ata66 = (reg47 & mask) ? 0 : 1;	/* bit[0(1)]: 0:80, 1:40 */
-#else
-	byte ata66 = 0;
-#endif
-	return ata66;
-}
-
-void __init ide_init_slc90e66 (ide_hwif_t *hwif)
-{
-	if (!hwif->irq)
-		hwif->irq = hwif->channel ? 15 : 14;
-
-	hwif->tuneproc = &slc90e66_tune_drive;
-	hwif->drives[0].autotune = 1;
-	hwif->drives[1].autotune = 1;
-
-	if (!hwif->dma_base)
-		return;
-
-	hwif->autodma = 0;
-	hwif->highmem = 1;
-#ifdef CONFIG_BLK_DEV_IDEDMA 
-	if (!noautodma)
-		hwif->autodma = 1;
-	hwif->dmaproc = &slc90e66_dmaproc;
-	hwif->speedproc = &slc90e66_tune_chipset;
-#endif /* !CONFIG_BLK_DEV_IDEDMA */
-}

drivers/pci/pci.ids

@@ -526,8 +526,10 @@
 	2040  79c974
 	7006  AMD-751 [Irongate] System Controller
 	7007  AMD-751 [Irongate] AGP Bridge
-	700e  AMD-760 [Irongate] System Controller
-	700f  AMD-760 [Irongate] AGP Bridge
+	700c  AMD-760 MP [IGD4-2P] System Controller
+	700d  AMD-760 MP [IGD4-2P] AGP Bridge
+	700e  AMD-760 [IGD4-1P] System Controller
+	700f  AMD-760 [IGD4-1P] AGP Bridge
 	7400  AMD-755 [Cobra] ISA
 	7401  AMD-755 [Cobra] IDE
 	7403  AMD-755 [Cobra] ACPI
@@ -540,11 +542,21 @@
 	7411  AMD-765 [Viper] IDE
 	7413  AMD-765 [Viper] ACPI
 	7414  AMD-765 [Viper] USB
-	7440  AMD-768 [??] ISA
-	7441  AMD-768 [??] IDE
-	7443  AMD-768 [??] ACPI
-	7448  AMD-768 [??] PCI
-	7449  AMD-768 [??] USB
+	7440  AMD-768 [Opus] ISA
+	7441  AMD-768 [Opus] IDE
+	7443  AMD-768 [Opus] ACPI
+	7448  AMD-768 [Opus] PCI
+	7449  AMD-768 [Opus] USB
+	7454  AMD-8151 System Controller
+	7455  AMD-8151 AGP Bridge
+	7460  AMD-8111 PCI
+	7461  AMD-8111 USB
+	7462  AMD-8111 Ethernet
+	7468  AMD-8111 LPC
+	7469  AMD-8111 IDE
+	746a  AMD-8111 SMBus 2.0
+	746b  AMD-8111 ACPI
+	746d  AMD-8111 AC97 Audio
 1023  Trident Microsystems
 	0194  82C194
 	2000  4DWave DX
@@ -1055,11 +1067,11 @@
 1052  ?Young Micro Systems
 1053  Young Micro Systems
 1054  Hitachi, Ltd
-1055  EFAR Microsystems
-	9130  EIDE Controller
-	9460  PCI to ISA Bridge
-	9462  USB Universal Host Controller [OHCI]
-	9463  Power Management Controller [Bridge]
+1055  Efar Microsystems
+	9130  slc90e66 [Victory66] IDE
+	9460  slc90e66 [Victory66] ISA
+	9462  slc90e66 [Victory66] USB
+	9463  slc90e66 [Victory66] ACPI
 1056  ICL
 # Motorola made a mistake and used 1507 instead of 1057 in some chips. Please look at the 1507 entry as well when updating this.
 1057  Motorola
@@ -1925,6 +1937,7 @@
 	0151  NV15 DDR (GeForce2 GTS)
 	0152  NV15 Bladerunner (GeForce2 Ultra)
 	0153  NV15 GL (Quadro2 Pro)
+	01bc  nForce IDE
 	0200  NV20 (GeForce3)
 	0203  Quadro DCC
 10df  Emulex Corporation
@@ -5066,6 +5079,8 @@
 	244c  82820 820 (Camino 2) Chipset ISA Bridge (ICH2-M)
 	244e  82820 820 (Camino 2) Chipset PCI
 	2485  AC'97 Audio Controller
+	248a  82801CAM ICH3-M IDE
+	248b  82801CA ICH3 IDE
 	2500  82820 820 (Camino) Chipset Host Bridge (MCH)
 		1043 801c  P3C-2000 system chipset
 	2501  82820 820 (Camino) Chipset Host Bridge (MCH)
@@ -5118,10 +5133,10 @@
 	71a0  440GX - 82443GX Host bridge
 	71a1  440GX - 82443GX AGP bridge
 	71a2  440GX - 82443GX Host bridge (AGP disabled)
-	7600  82372FB PCI to ISA Bridge
-	7601  82372FB PIIX4 IDE
-	7602  82372FB [PCI-to-USB UHCI]
-	7603  82372FB System Management Bus Controller
+	7600  82372FB PIIX5 ISA
+	7601  82372FB PIIX5 IDE
+	7602  82372FB PIIX5 USB
+	7603  82372FB PIIX5 SMBus
 	7800  i740
 		1092 0100  Stealth II G460
 		8086 0100  Intel740 Graphics Accelerator

include/linux/ide.h

@@ -815,7 +815,6 @@ typedef struct ide_task_s {
 	int			command_type;
 	ide_pre_handler_t	*prehandler;
 	ide_handler_t		*handler;
-	ide_post_handler_t	*posthandler;
 	void			*special;	/* valid_t generally */
 	struct request		*rq;		/* copy of request */
 	unsigned long		block;		/* copy of block */
@@ -842,17 +841,17 @@ void do_taskfile (ide_drive_t *drive, struct hd_drive_task_hdr *taskfile, struct
  * Special Flagged Register Validation Caller
  */
 
-ide_startstop_t set_multmode_intr (ide_drive_t *drive);
-ide_startstop_t task_no_data_intr (ide_drive_t *drive);
+extern ide_startstop_t recal_intr(ide_drive_t *drive);
+extern ide_startstop_t set_geometry_intr(ide_drive_t *drive);
+extern ide_startstop_t set_multmode_intr(ide_drive_t *drive);
+extern ide_startstop_t task_no_data_intr(ide_drive_t *drive);
 
 int ide_wait_taskfile (ide_drive_t *drive, struct hd_drive_task_hdr *taskfile, struct hd_drive_hob_hdr *hobfile, byte *buf);
 
 int ide_raw_taskfile (ide_drive_t *drive, ide_task_t *cmd, byte *buf);
 
-ide_pre_handler_t * ide_pre_handler_parser (struct hd_drive_task_hdr *taskfile, struct hd_drive_hob_hdr *hobfile);
-ide_handler_t * ide_handler_parser (struct hd_drive_task_hdr *taskfile, struct hd_drive_hob_hdr *hobfile);
 /* Expects args is a full set of TF registers and parses the command type */
-int ide_cmd_type_parser (ide_task_t *args);
+extern void ide_cmd_type_parser(ide_task_t *args);
 
 int ide_cmd_ioctl (ide_drive_t *drive, struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg);
 int ide_task_ioctl (ide_drive_t *drive, struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg);

include/linux/pci_ids.h

@@ -865,6 +865,7 @@
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS2	0x0151
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE2_ULTRA	0x0152
 #define PCI_DEVICE_ID_NVIDIA_QUADRO2_PRO	0x0153
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_IDE		0x01bc
 
 #define PCI_VENDOR_ID_IMS		0x10e0
 #define PCI_DEVICE_ID_IMS_8849		0x8849