dmaengine: mv_xor_v2: new driver

The new mv_xor_v2 driver supports the XOR engines found in the 64-bits
ARM from Marvell of the Armada 7K and Armada 8K family. This XOR
engine is a completely new hardware block, entirely different from the
one used on previous Marvell Armada platforms, which use the existing
mv_xor driver.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

drivers/dma/Kconfig

@@ -339,6 +339,20 @@ config MV_XOR
 	---help---
 	  Enable support for the Marvell XOR engine.
 
+config MV_XOR_V2
+	bool "Marvell XOR engine version 2 support "
+	depends on ARM64
+	select DMA_ENGINE
+	select DMA_ENGINE_RAID
+	select ASYNC_TX_ENABLE_CHANNEL_SWITCH
+	select GENERIC_MSI_IRQ_DOMAIN
+	---help---
+	  Enable support for the Marvell version 2 XOR engine.
+
+	  This engine provides acceleration for copy, XOR and RAID6
+	  operations, and is available on Marvell Armada 7K and 8K
+	  platforms.
+
 config MXS_DMA
 	bool "MXS DMA support"
 	depends on SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q || SOC_IMX6UL

drivers/dma/Makefile

@@ -45,6 +45,7 @@ obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o
 obj-$(CONFIG_MOXART_DMA) += moxart-dma.o
 obj-$(CONFIG_MPC512X_DMA) += mpc512x_dma.o
 obj-$(CONFIG_MV_XOR) += mv_xor.o
+obj-$(CONFIG_MV_XOR_V2) += mv_xor_v2.o
 obj-$(CONFIG_MXS_DMA) += mxs-dma.o
 obj-$(CONFIG_MX3_IPU) += ipu/
 obj-$(CONFIG_NBPFAXI_DMA) += nbpfaxi.o