Commit 19e805cb authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  sis190: failure to set the MAC address from EEPROM
  Fix phy_read/write redefinition errors in ucc_geth_phy.c
  Update ucc_geth.c for new workqueue structure
  myri10ge: update driver version to 1.2.0
  myri10ge: check that we can get an irq
  myri10ge: make wc_fifo usage load-time tunable
  8139cp: Don't blindly enable interrupts
  [PATCH] bcm43xx: Fix failure to deliver PCI-E interrupts
parents ab112782 7939aae0
......@@ -765,17 +765,18 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev)
struct cp_private *cp = netdev_priv(dev);
unsigned entry;
u32 eor, flags;
unsigned long intr_flags;
#if CP_VLAN_TAG_USED
u32 vlan_tag = 0;
#endif
int mss = 0;
spin_lock_irq(&cp->lock);
spin_lock_irqsave(&cp->lock, intr_flags);
/* This is a hard error, log it. */
if (TX_BUFFS_AVAIL(cp) <= (skb_shinfo(skb)->nr_frags + 1)) {
netif_stop_queue(dev);
spin_unlock_irq(&cp->lock);
spin_unlock_irqrestore(&cp->lock, intr_flags);
printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
dev->name);
return 1;
......@@ -908,7 +909,7 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev)
if (TX_BUFFS_AVAIL(cp) <= (MAX_SKB_FRAGS + 1))
netif_stop_queue(dev);
spin_unlock_irq(&cp->lock);
spin_unlock_irqrestore(&cp->lock, intr_flags);
cpw8(TxPoll, NormalTxPoll);
dev->trans_start = jiffies;
......
......@@ -71,7 +71,7 @@
#include "myri10ge_mcp.h"
#include "myri10ge_mcp_gen_header.h"
#define MYRI10GE_VERSION_STR "1.1.0"
#define MYRI10GE_VERSION_STR "1.2.0"
MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
MODULE_AUTHOR("Maintainer: help@myri.com");
......@@ -274,6 +274,10 @@ static int myri10ge_fill_thresh = 256;
module_param(myri10ge_fill_thresh, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed\n");
static int myri10ge_wcfifo = 1;
module_param(myri10ge_wcfifo, int, S_IRUGO);
MODULE_PARM_DESC(myri10ge_wcfifo, "Enable WC Fifo when WC is enabled\n");
#define MYRI10GE_FW_OFFSET 1024*1024
#define MYRI10GE_HIGHPART_TO_U32(X) \
(sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
......@@ -1714,7 +1718,7 @@ static int myri10ge_open(struct net_device *dev)
goto abort_with_irq;
}
if (mgp->mtrr >= 0) {
if (myri10ge_wcfifo && mgp->mtrr >= 0) {
mgp->tx.wc_fifo = (u8 __iomem *) mgp->sram + MXGEFW_ETH_SEND_4;
mgp->rx_small.wc_fifo =
(u8 __iomem *) mgp->sram + MXGEFW_ETH_RECV_SMALL;
......@@ -2878,7 +2882,6 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
netdev->hard_start_xmit = myri10ge_xmit;
netdev->get_stats = myri10ge_get_stats;
netdev->base_addr = mgp->iomem_base;
netdev->irq = pdev->irq;
netdev->change_mtu = myri10ge_change_mtu;
netdev->set_multicast_list = myri10ge_set_multicast_list;
netdev->set_mac_address = myri10ge_set_mac_address;
......@@ -2888,6 +2891,15 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
netdev->poll = myri10ge_poll;
netdev->weight = myri10ge_napi_weight;
/* make sure we can get an irq, and that MSI can be
* setup (if available). Also ensure netdev->irq
* is set to correct value if MSI is enabled */
status = myri10ge_request_irq(mgp);
if (status != 0)
goto abort_with_firmware;
netdev->irq = pdev->irq;
myri10ge_free_irq(mgp);
/* Save configuration space to be restored if the
* nic resets due to a parity error */
pci_save_state(pdev);
......@@ -2903,8 +2915,9 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
dev_err(&pdev->dev, "register_netdev failed: %d\n", status);
goto abort_with_state;
}
dev_info(dev, "%d, tx bndry %d, fw %s, WC %s\n",
pdev->irq, mgp->tx.boundary, mgp->fw_name,
dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, WC %s\n",
(mgp->msi_enabled ? "MSI" : "xPIC"),
netdev->irq, mgp->tx.boundary, mgp->fw_name,
(mgp->mtrr >= 0 ? "Enabled" : "Disabled"));
return 0;
......
......@@ -1562,7 +1562,7 @@ static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev,
for (i = 0; i < MAC_ADDR_LEN / 2; i++) {
__le16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i);
((u16 *)dev->dev_addr)[0] = le16_to_cpu(w);
((u16 *)dev->dev_addr)[i] = le16_to_cpu(w);
}
sis190_set_rgmii(tp, sis190_read_eeprom(ioaddr, EEPROMInfo));
......
......@@ -29,6 +29,7 @@
#include <linux/fsl_devices.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/workqueue.h>
#include <asm/of_platform.h>
#include <asm/uaccess.h>
......@@ -472,7 +473,7 @@ static void put_enet_addr_container(struct enet_addr_container *enet_addr_cont)
kfree(enet_addr_cont);
}
static int set_mac_addr(__be16 __iomem *reg, u8 *mac)
static void set_mac_addr(__be16 __iomem *reg, u8 *mac)
{
out_be16(&reg[0], ((u16)mac[5] << 8) | mac[4]);
out_be16(&reg[1], ((u16)mac[3] << 8) | mac[2]);
......@@ -3920,10 +3921,11 @@ static irqreturn_t phy_interrupt(int irq, void *dev_id)
}
/* Scheduled by the phy_interrupt/timer to handle PHY changes */
static void ugeth_phy_change(void *data)
static void ugeth_phy_change(struct work_struct *work)
{
struct net_device *dev = (struct net_device *)data;
struct ucc_geth_private *ugeth = netdev_priv(dev);
struct ucc_geth_private *ugeth =
container_of(work, struct ucc_geth_private, tq);
struct net_device *dev = ugeth->dev;
struct ucc_geth *ug_regs;
int result = 0;
......@@ -4080,7 +4082,7 @@ static int ucc_geth_open(struct net_device *dev)
#endif /* CONFIG_UGETH_NAPI */
/* Set up the PHY change work queue */
INIT_WORK(&ugeth->tq, ugeth_phy_change, dev);
INIT_WORK(&ugeth->tq, ugeth_phy_change);
init_timer(&ugeth->phy_info_timer);
ugeth->phy_info_timer.function = &ugeth_phy_startup_timer;
......
This diff is collapsed.
......@@ -2701,8 +2701,8 @@ static int bcm43xx_probe_cores(struct bcm43xx_private *bcm)
sb_id_hi = bcm43xx_read32(bcm, BCM43xx_CIR_SB_ID_HI);
/* extract core_id, core_rev, core_vendor */
core_id = (sb_id_hi & 0xFFF0) >> 4;
core_rev = (sb_id_hi & 0xF);
core_id = (sb_id_hi & 0x8FF0) >> 4;
core_rev = ((sb_id_hi & 0xF) | ((sb_id_hi & 0x7000) >> 8));
core_vendor = (sb_id_hi & 0xFFFF0000) >> 16;
dprintk(KERN_INFO PFX "Core %d: ID 0x%x, rev 0x%x, vendor 0x%x\n",
......@@ -2873,7 +2873,10 @@ static int bcm43xx_wireless_core_init(struct bcm43xx_private *bcm,
sbimconfiglow = bcm43xx_read32(bcm, BCM43xx_CIR_SBIMCONFIGLOW);
sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK;
sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK;
if (bcm->bustype == BCM43xx_BUSTYPE_PCI)
sbimconfiglow |= 0x32;
else
sbimconfiglow |= 0x53;
bcm43xx_write32(bcm, BCM43xx_CIR_SBIMCONFIGLOW, sbimconfiglow);
}
......@@ -3077,7 +3080,7 @@ static int bcm43xx_setup_backplane_pci_connection(struct bcm43xx_private *bcm,
if (err)
goto out;
if (bcm->current_core->rev < 6 ||
if (bcm->current_core->rev < 6 &&
bcm->current_core->id == BCM43xx_COREID_PCI) {
value = bcm43xx_read32(bcm, BCM43xx_CIR_SBINTVEC);
value |= (1 << backplane_flag_nr);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment