[ARM] pxa/vpac270: Add touchscreen support

This adds support for the UCB1400 touchscreen found in the VPAC270 device.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

arch/arm/mach-pxa/vpac270.c

@@ -22,11 +22,13 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/dm9000.h>
+#include <linux/ucb1400.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <mach/pxa27x.h>
+#include <mach/audio.h>
 #include <mach/vpac270.h>
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
@@ -121,6 +123,15 @@ static unsigned long vpac270_pin_config[] __initdata = {
 
 	/* Ethernet */
 	GPIO114_GPIO,	/* IRQ */
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO95_AC97_nRESET,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_GPIO,	/* TS IRQ */
 };
 
 /******************************************************************************
@@ -356,6 +367,36 @@ static void __init vpac270_eth_init(void)
 static inline void vpac270_eth_init(void) {}
 #endif
 
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static pxa2xx_audio_ops_t vpac270_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct ucb1400_pdata vpac270_ucb1400_pdata = {
+	.irq		= IRQ_GPIO(113),
+};
+
+static struct platform_device vpac270_ucb1400_device = {
+	.name		= "ucb1400_core",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &vpac270_ucb1400_pdata,
+	},
+};
+
+static void __init vpac270_ts_init(void)
+{
+	pxa_set_ac97_info(&vpac270_ac97_pdata);
+	platform_device_register(&vpac270_ucb1400_device);
+}
+#else
+static inline void vpac270_ts_init(void) {}
+#endif
+
 /******************************************************************************
  * Framebuffer
  ******************************************************************************/
@@ -439,6 +480,7 @@ static void __init vpac270_init(void)
 	vpac270_uhc_init();
 	vpac270_udc_init();
 	vpac270_eth_init();
+	vpac270_ts_init();
 }
 
 MACHINE_START(VPAC270, "Voipac PXA270")