serverworks: fix DMA

The driver used to depend on BIOS settings for deciding whether it is OK
to use DMA.  However it seems that BIOS doesn't always handle all cases
correctly so just let IDE core to decide about this.  It should be a safe
thing to do now, after the driver went through heavy bugfixing.

Thanks for bugreport and testing the patch goes out to Sven Niedner.
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 1880a8d7
/* /*
* linux/drivers/ide/pci/serverworks.c Version 0.21 Jun 16 2007 * linux/drivers/ide/pci/serverworks.c Version 0.22 Jun 27 2007
* *
* Copyright (C) 1998-2000 Michel Aubry * Copyright (C) 1998-2000 Michel Aubry
* Copyright (C) 1998-2000 Andrzej Krzysztofowicz * Copyright (C) 1998-2000 Andrzej Krzysztofowicz
...@@ -387,8 +387,6 @@ static u8 __devinit ata66_svwks(ide_hwif_t *hwif) ...@@ -387,8 +387,6 @@ static u8 __devinit ata66_svwks(ide_hwif_t *hwif)
static void __devinit init_hwif_svwks (ide_hwif_t *hwif) static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
{ {
u8 dma_stat = 0;
if (!hwif->irq) if (!hwif->irq)
hwif->irq = hwif->channel ? 15 : 14; hwif->irq = hwif->channel ? 15 : 14;
...@@ -419,9 +417,7 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif) ...@@ -419,9 +417,7 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
if (!noautodma) if (!noautodma)
hwif->autodma = 1; hwif->autodma = 1;
dma_stat = inb(hwif->dma_status); hwif->drives[0].autodma = hwif->drives[1].autodma = 1;
hwif->drives[0].autodma = (dma_stat & 0x20);
hwif->drives[1].autodma = (dma_stat & 0x40);
} }
static int __devinit init_setup_svwks (struct pci_dev *dev, ide_pci_device_t *d) static int __devinit init_setup_svwks (struct pci_dev *dev, ide_pci_device_t *d)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment