Commit 1cd6ba8a authored by Wen Gong's avatar Wen Gong Committed by Kalle Valo

ath10k: remove return for NL80211_STA_INFO_TX_BITRATE

ath10k_sta_statistics is used to report many info to iw wlan0 link,
if it return for empty legacy and nss of arsta->txrate, then the other
stats after it will not be set.

It has 4 bit to set after the return:
NL80211_STA_INFO_TX_FAILED
NL80211_STA_INFO_RX_BITRATE
NL80211_STA_INFO_TX_BITRATE
NL80211_STA_INFO_TX_RETRIES

This patch not effect the info of above 4 bit for all hardware, reason
as below:

NL80211_STA_INFO_TX_FAILED is only for htt.disable_tx_comp is true, it
is for QCA6174 SDIO.

NL80211_STA_INFO_RX_BITRATE and NL80211_STA_INFO_TX_BITRATE are both
set in ath10k_mac_sta_get_peer_stats_info, it is only enabled for chips
which supports_peer_stats_info is true in hw_params, recently only for
QCA6174 SDIO, NL80211_STA_INFO_TX_BITRATE is set again in function
ath10k_mac_sta_get_peer_stats_info because the value which parsed from
arsta->tx_rate_code and arsta->tx_bitrate_kbps is correct for QCA6174
SDIO and PCIe, and the value arsta->txrate is not correct for QCA6174
SDIO and PCIe, so it need to set again with the correct value.

NL80211_STA_INFO_TX_RETRIES is use value of arsta->tx_retries, it is set
in ath10k_update_per_peer_tx_stats, which accumulate the retry_pkts in
HTT message from firmware, if the chips not support this feature, then
it is always 0 after accumulate, then iw wlan0 station dump always show
0 for retry count. If not set NL80211_STA_INFO_TX_RETRIES here, then it
is still 0, so the result is same, then set NL80211_STA_INFO_TX_RETRIES
has no effect.

Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00048
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Signed-off-by: default avatarWen Gong <wgong@codeaurora.org>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597312029-32348-3-git-send-email-wgong@codeaurora.org
parent e39f32af
......@@ -8533,9 +8533,7 @@ static void ath10k_sta_statistics(struct ieee80211_hw *hw,
sinfo->rx_duration = arsta->rx_duration;
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_DURATION);
if (!arsta->txrate.legacy && !arsta->txrate.nss)
return;
if (arsta->txrate.legacy || arsta->txrate.nss) {
if (arsta->txrate.legacy) {
sinfo->txrate.legacy = arsta->txrate.legacy;
} else {
......@@ -8545,6 +8543,7 @@ static void ath10k_sta_statistics(struct ieee80211_hw *hw,
}
sinfo->txrate.flags = arsta->txrate.flags;
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
}
if (ar->htt.disable_tx_comp) {
sinfo->tx_failed = arsta->tx_failed;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment