Commit 1d3bc636 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'docs-4.15-2' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "A few late-arriving docs updates that have no real reason to wait.

  There's a new "Co-Developed-by" tag described by Greg, and a build
  enhancement from Willy to generate docs warnings during a kernel build
  (but only when additional warnings have been requested in general)"

* tag 'docs-4.15-2' of git://git.lwn.net/linux:
  Add optional check for bad kernel-doc comments
  Documentation: fix profile= options in kernel-parameters.txt
  documentation/svga.txt: update outdated file
  kokr/memory-barriers.txt: Fix typo in paring example
  kokr/memory-barriers/txt: Replace uses of "transitive"
  Documentation/process: add Co-Developed-by: tag for patches with multiple authors
parents dab0badc 3a025e1d
...@@ -3246,13 +3246,15 @@ ...@@ -3246,13 +3246,15 @@
instead using the legacy FADT method instead using the legacy FADT method
profile= [KNL] Enable kernel profiling via /proc/profile profile= [KNL] Enable kernel profiling via /proc/profile
Format: [schedule,]<number> Format: [<profiletype>,]<number>
Param: <profiletype>: "schedule", "sleep", or "kvm"
[defaults to kernel profiling]
Param: "schedule" - profile schedule points. Param: "schedule" - profile schedule points.
Param: <number> - step/bucket size as a power of 2 for
statistical time based profiling.
Param: "sleep" - profile D-state sleeping (millisecs). Param: "sleep" - profile D-state sleeping (millisecs).
Requires CONFIG_SCHEDSTATS Requires CONFIG_SCHEDSTATS
Param: "kvm" - profile VM exits. Param: "kvm" - profile VM exits.
Param: <number> - step/bucket size as a power of 2 for
statistical time based profiling.
prompt_ramdisk= [RAM] List of RAM disks to prompt for floppy disk prompt_ramdisk= [RAM] List of RAM disks to prompt for floppy disk
before loading. before loading.
......
...@@ -213,6 +213,11 @@ The tags in common use are: ...@@ -213,6 +213,11 @@ The tags in common use are:
which can be found in Documentation/process/submitting-patches.rst. Code without a which can be found in Documentation/process/submitting-patches.rst. Code without a
proper signoff cannot be merged into the mainline. proper signoff cannot be merged into the mainline.
- Co-Developed-by: states that the patch was also created by another developer
along with the original author. This is useful at times when multiple
people work on a single patch. Note, this person also needs to have a
Signed-off-by: line in the patch as well.
- Acked-by: indicates an agreement by another developer (often a - Acked-by: indicates an agreement by another developer (often a
maintainer of the relevant code) that the patch is appropriate for maintainer of the relevant code) that the patch is appropriate for
inclusion into the kernel. inclusion into the kernel.
......
...@@ -67,8 +67,7 @@ The menu looks like:: ...@@ -67,8 +67,7 @@ The menu looks like::
<name-of-detected-video-adapter> tells what video adapter did Linux detect <name-of-detected-video-adapter> tells what video adapter did Linux detect
-- it's either a generic adapter name (MDA, CGA, HGC, EGA, VGA, VESA VGA [a VGA -- it's either a generic adapter name (MDA, CGA, HGC, EGA, VGA, VESA VGA [a VGA
with VESA-compliant BIOS]) or a chipset name (e.g., Trident). Direct detection with VESA-compliant BIOS]) or a chipset name (e.g., Trident). Direct detection
of chipsets is turned off by default (see CONFIG_VIDEO_SVGA in chapter 4 to see of chipsets is turned off by default as it's inherently unreliable due to
how to enable it if you really want) as it's inherently unreliable due to
absolutely insane PC design. absolutely insane PC design.
"0 0F00 80x25" means that the first menu item (the menu items are numbered "0 0F00 80x25" means that the first menu item (the menu items are numbered
...@@ -138,7 +137,7 @@ The ID numbers can be divided to those regions:: ...@@ -138,7 +137,7 @@ The ID numbers can be divided to those regions::
0x0f05 VGA 80x30 (480 scans, 16-point font) 0x0f05 VGA 80x30 (480 scans, 16-point font)
0x0f06 VGA 80x34 (480 scans, 14-point font) 0x0f06 VGA 80x34 (480 scans, 14-point font)
0x0f07 VGA 80x60 (480 scans, 8-point font) 0x0f07 VGA 80x60 (480 scans, 8-point font)
0x0f08 Graphics hack (see the CONFIG_VIDEO_HACK paragraph below) 0x0f08 Graphics hack (see the VIDEO_GFX_HACK paragraph below)
0x1000 to 0x7fff - modes specified by resolution. The code has a "0xRRCC" 0x1000 to 0x7fff - modes specified by resolution. The code has a "0xRRCC"
form where RR is a number of rows and CC is a number of columns. form where RR is a number of rows and CC is a number of columns.
...@@ -160,58 +159,22 @@ end of the display. ...@@ -160,58 +159,22 @@ end of the display.
Options Options
~~~~~~~ ~~~~~~~
Some options can be set in the source text (in arch/i386/boot/video.S). Build options for arch/x86/boot/* are selected by the kernel kconfig
All of them are simple #define's -- change them to #undef's when you want to utility and the kernel .config file.
switch them off. Currently supported:
VIDEO_GFX_HACK - includes special hack for setting of graphics modes
CONFIG_VIDEO_SVGA - enables autodetection of SVGA cards. This is switched to be used later by special drivers.
off by default as it's a bit unreliable due to terribly bad PC design. If you
really want to have the adapter autodetected (maybe in case the ``scan`` feature
doesn't work on your machine), switch this on and don't cry if the results
are not completely sane. In case you really need this feature, please drop me
a mail as I think of removing it some day.
CONFIG_VIDEO_VESA - enables autodetection of VESA modes. If it doesn't work
on your machine (or displays a "Error: Scanning of VESA modes failed" message),
you can switch it off and report as a bug.
CONFIG_VIDEO_COMPACT - enables compacting of the video mode list. If there
are more modes with the same screen size, only the first one is kept (see above
for more info on mode ordering). However, in very strange cases it's possible
that the first "version" of the mode doesn't work although some of the others
do -- in this case turn this switch off to see the rest.
CONFIG_VIDEO_RETAIN - enables retaining of screen contents when switching
video modes. Works only with some boot loaders which leave enough room for the
buffer. (If you have old LILO, you can adjust heap_end_ptr and loadflags
in setup.S, but it's better to upgrade the boot loader...)
CONFIG_VIDEO_LOCAL - enables inclusion of "local modes" in the list. The
local modes are added automatically to the beginning of the list not depending
on hardware configuration. The local modes are listed in the source text after
the "local_mode_table:" line. The comment before this line describes the format
of the table (which also includes a video card name to be displayed on the
top of the menu).
CONFIG_VIDEO_400_HACK - force setting of 400 scan lines for standard VGA
modes. This option is intended to be used on certain buggy BIOSes which draw
some useless logo using font download and then fail to reset the correct mode.
Don't use unless needed as it forces resetting the video card.
CONFIG_VIDEO_GFX_HACK - includes special hack for setting of graphics modes
to be used later by special drivers (e.g., 800x600 on IBM ThinkPad -- see
ftp://ftp.phys.keio.ac.jp/pub/XFree86/800x600/XF86Configs/XF86Config.IBM_TP560).
Allows to set _any_ BIOS mode including graphic ones and forcing specific Allows to set _any_ BIOS mode including graphic ones and forcing specific
text screen resolution instead of peeking it from BIOS variables. Don't use text screen resolution instead of peeking it from BIOS variables. Don't use
unless you think you know what you're doing. To activate this setup, use unless you think you know what you're doing. To activate this setup, use
mode number 0x0f08 (see section 3). mode number 0x0f08 (see the Mode IDs section above).
Still doesn't work? Still doesn't work?
~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~
When the mode detection doesn't work (e.g., the mode list is incorrect or When the mode detection doesn't work (e.g., the mode list is incorrect or
the machine hangs instead of displaying the menu), try to switch off some of the machine hangs instead of displaying the menu), try to switch off some of
the configuration options listed in section 4. If it fails, you can still use the configuration options listed under "Options". If it fails, you can still use
your kernel with the video mode set directly via the kernel parameter. your kernel with the video mode set directly via the kernel parameter.
In either case, please send me a bug report containing what _exactly_ In either case, please send me a bug report containing what _exactly_
...@@ -228,10 +191,6 @@ contains the most common video BIOS bug called "incorrect vertical display ...@@ -228,10 +191,6 @@ contains the most common video BIOS bug called "incorrect vertical display
end setting". Adding 0x8000 to the mode ID might fix the problem. Unfortunately, end setting". Adding 0x8000 to the mode ID might fix the problem. Unfortunately,
this must be done manually -- no autodetection mechanisms are available. this must be done manually -- no autodetection mechanisms are available.
If you have a VGA card and your display still looks as on EGA, your BIOS
is probably broken and you need to set the CONFIG_VIDEO_400_HACK switch to
force setting of the correct mode.
History History
~~~~~~~ ~~~~~~~
......
...@@ -100,6 +100,10 @@ ifneq ($(KBUILD_CHECKSRC),0) ...@@ -100,6 +100,10 @@ ifneq ($(KBUILD_CHECKSRC),0)
endif endif
endif endif
ifneq ($(KBUILD_ENABLE_EXTRA_GCC_CHECKS),)
cmd_checkdoc = $(srctree)/scripts/kernel-doc -none $< ;
endif
# Do section mismatch analysis for each module/built-in.o # Do section mismatch analysis for each module/built-in.o
ifdef CONFIG_DEBUG_SECTION_MISMATCH ifdef CONFIG_DEBUG_SECTION_MISMATCH
cmd_secanalysis = ; scripts/mod/modpost $@ cmd_secanalysis = ; scripts/mod/modpost $@
...@@ -283,6 +287,7 @@ define rule_cc_o_c ...@@ -283,6 +287,7 @@ define rule_cc_o_c
$(call echo-cmd,checksrc) $(cmd_checksrc) \ $(call echo-cmd,checksrc) $(cmd_checksrc) \
$(call cmd_and_fixdep,cc_o_c) \ $(call cmd_and_fixdep,cc_o_c) \
$(cmd_modversions_c) \ $(cmd_modversions_c) \
$(cmd_checkdoc) \
$(call echo-cmd,objtool) $(cmd_objtool) \ $(call echo-cmd,objtool) $(cmd_objtool) \
$(call echo-cmd,record_mcount) $(cmd_record_mcount) $(call echo-cmd,record_mcount) $(cmd_record_mcount)
endef endef
......
...@@ -58,6 +58,7 @@ Output format selection (mutually exclusive): ...@@ -58,6 +58,7 @@ Output format selection (mutually exclusive):
-man Output troff manual page format. This is the default. -man Output troff manual page format. This is the default.
-rst Output reStructuredText format. -rst Output reStructuredText format.
-text Output plain text format. -text Output plain text format.
-none Do not output documentation, only warnings.
Output selection (mutually exclusive): Output selection (mutually exclusive):
-export Only output documentation for symbols that have been -export Only output documentation for symbols that have been
...@@ -532,6 +533,8 @@ while ($ARGV[0] =~ m/^-(.*)/) { ...@@ -532,6 +533,8 @@ while ($ARGV[0] =~ m/^-(.*)/) {
$output_mode = "gnome"; $output_mode = "gnome";
@highlights = @highlights_gnome; @highlights = @highlights_gnome;
$blankline = $blankline_gnome; $blankline = $blankline_gnome;
} elsif ($cmd eq "-none") {
$output_mode = "none";
} elsif ($cmd eq "-module") { # not needed for XML, inherits from calling document } elsif ($cmd eq "-module") { # not needed for XML, inherits from calling document
$modulename = shift @ARGV; $modulename = shift @ARGV;
} elsif ($cmd eq "-function") { # to only output specific functions } elsif ($cmd eq "-function") { # to only output specific functions
...@@ -2117,6 +2120,24 @@ sub output_blockhead_list(%) { ...@@ -2117,6 +2120,24 @@ sub output_blockhead_list(%) {
} }
} }
## none mode output functions
sub output_function_none(%) {
}
sub output_enum_none(%) {
}
sub output_typedef_none(%) {
}
sub output_struct_none(%) {
}
sub output_blockhead_none(%) {
}
## ##
# generic output function for all types (function, struct/union, typedef, enum); # generic output function for all types (function, struct/union, typedef, enum);
# calls the generated, variable output_ function name based on # calls the generated, variable output_ function name based on
...@@ -3143,7 +3164,9 @@ sub process_file($) { ...@@ -3143,7 +3164,9 @@ sub process_file($) {
} }
} }
if ($initial_section_counter == $section_counter) { if ($initial_section_counter == $section_counter) {
if ($output_mode ne "none") {
print STDERR "${file}:1: warning: no structured comments found\n"; print STDERR "${file}:1: warning: no structured comments found\n";
}
if (($output_selection == OUTPUT_INCLUDE) && ($show_not_found == 1)) { if (($output_selection == OUTPUT_INCLUDE) && ($show_not_found == 1)) {
print STDERR " Was looking for '$_'.\n" for keys %function_table; print STDERR " Was looking for '$_'.\n" for keys %function_table;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment