Commit 1e15687e authored by Chase Southwood's avatar Chase Southwood Committed by Greg Kroah-Hartman

staging: comedi: addi_apci_1564: add Change-of-State interrupt subdevice and required functions

This board supports an interrupt that can be generated by an AND/OR
combination of 16 of the input channels.

Create a separate subdevice to handle this interrupt.

The apci1564_di_config() function is used to configure which
inputs are used to generate the interrupt. Currently this function
is broken since it does not follow the comedi API for insn_config
functions. Fix this function by implementing the config instruction
INSN_CONFIG_DIGITAL_TRIG.

Add the remaining subdevice operations necessary for the interrupt
subdevice to support async commands.
Signed-off-by: default avatarChase Southwood <chase.southwood@gmail.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 4c95a2b6
...@@ -26,12 +26,12 @@ ...@@ -26,12 +26,12 @@
#define APCI1564_ADDRESS_RANGE 128 #define APCI1564_ADDRESS_RANGE 128
/* Digital Input IRQ Function Selection */ /* Digital Input IRQ Function Selection */
#define ADDIDATA_OR 0 #define APCI1564_DI_INT_OR (0 << 1)
#define ADDIDATA_AND 1 #define APCI1564_DI_INT_AND (1 << 1)
/* Digital Input Interrupt Enable Disable. */ /* Digital Input Interrupt Enable Disable. */
#define APCI1564_DIGITAL_IP_INTERRUPT_ENABLE 0x4 #define APCI1564_DI_INT_ENABLE 0x4
#define APCI1564_DIGITAL_IP_INTERRUPT_DISABLE 0xfffffffb #define APCI1564_DI_INT_DISABLE 0xfffffffb
/* Digital Output Interrupt Enable Disable. */ /* Digital Output Interrupt Enable Disable. */
#define APCI1564_DIGITAL_OP_VCC_INTERRUPT_ENABLE 0x1 #define APCI1564_DIGITAL_OP_VCC_INTERRUPT_ENABLE 0x1
...@@ -89,42 +89,6 @@ ...@@ -89,42 +89,6 @@
#define APCI1564_TCW_WARN_TIMEVAL_REG(x) (0x18 + ((x) * 0x20)) #define APCI1564_TCW_WARN_TIMEVAL_REG(x) (0x18 + ((x) * 0x20))
#define APCI1564_TCW_WARN_TIMEBASE_REG(x) (0x1c + ((x) * 0x20)) #define APCI1564_TCW_WARN_TIMEBASE_REG(x) (0x1c + ((x) * 0x20))
/*
* Configures the digital input Subdevice
*
* data[0] 1 = Enable interrupt, 0 = Disable interrupt
* data[1] 0 = ADDIDATA Interrupt OR LOGIC, 1 = ADDIDATA Interrupt AND LOGIC
* data[2] Interrupt mask for the mode 1
* data[3] Interrupt mask for the mode 2
*/
static int apci1564_di_config(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
struct apci1564_private *devpriv = dev->private;
devpriv->tsk_current = current;
/* Set the digital input logic */
if (data[0] == 1) {
data[2] = data[2] << 4;
data[3] = data[3] << 4;
outl(data[2], devpriv->amcc_iobase + APCI1564_DI_INT_MODE1_REG);
outl(data[3], devpriv->amcc_iobase + APCI1564_DI_INT_MODE2_REG);
if (data[1] == ADDIDATA_OR)
outl(0x4, devpriv->amcc_iobase + APCI1564_DI_IRQ_REG);
else
outl(0x6, devpriv->amcc_iobase + APCI1564_DI_IRQ_REG);
} else {
outl(0x0, devpriv->amcc_iobase + APCI1564_DI_INT_MODE1_REG);
outl(0x0, devpriv->amcc_iobase + APCI1564_DI_INT_MODE2_REG);
outl(0x0, devpriv->amcc_iobase + APCI1564_DI_IRQ_REG);
}
return insn->n;
}
/* /*
* Configures The Digital Output Subdevice. * Configures The Digital Output Subdevice.
* *
......
...@@ -8,6 +8,9 @@ ...@@ -8,6 +8,9 @@
struct apci1564_private { struct apci1564_private {
unsigned int amcc_iobase; /* base of AMCC I/O registers */ unsigned int amcc_iobase; /* base of AMCC I/O registers */
unsigned int mode1; /* riding-edge/high level channels */
unsigned int mode2; /* falling-edge/low level channels */
unsigned int ctrl; /* interrupt mode OR (edge) . AND (level) */
unsigned int do_int_type; unsigned int do_int_type;
unsigned char timer_select_mode; unsigned char timer_select_mode;
unsigned char mode_select_register; unsigned char mode_select_register;
...@@ -16,6 +19,38 @@ struct apci1564_private { ...@@ -16,6 +19,38 @@ struct apci1564_private {
#include "addi-data/hwdrv_apci1564.c" #include "addi-data/hwdrv_apci1564.c"
static int apci1564_reset(struct comedi_device *dev)
{
struct apci1564_private *devpriv = dev->private;
devpriv->do_int_type = 0;
/* Disable the input interrupts and reset status register */
outl(0x0, devpriv->amcc_iobase + APCI1564_DI_IRQ_REG);
inl(devpriv->amcc_iobase + APCI1564_DI_INT_STATUS_REG);
outl(0x0, devpriv->amcc_iobase + APCI1564_DI_INT_MODE1_REG);
outl(0x0, devpriv->amcc_iobase + APCI1564_DI_INT_MODE2_REG);
/* Reset the output channels and disable interrupts */
outl(0x0, devpriv->amcc_iobase + APCI1564_DO_REG);
outl(0x0, devpriv->amcc_iobase + APCI1564_DO_INT_CTRL_REG);
/* Reset the watchdog registers */
addi_watchdog_reset(devpriv->amcc_iobase + APCI1564_WDOG_REG);
/* Reset the timer registers */
outl(0x0, devpriv->amcc_iobase + APCI1564_TIMER_CTRL_REG);
outl(0x0, devpriv->amcc_iobase + APCI1564_TIMER_RELOAD_REG);
/* Reset the counter registers */
outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER1));
outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER2));
outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER3));
outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER4));
return 0;
}
static irqreturn_t v_ADDI_Interrupt(int irq, void *d) static irqreturn_t v_ADDI_Interrupt(int irq, void *d)
{ {
apci1564_interrupt(irq, d); apci1564_interrupt(irq, d);
...@@ -51,34 +86,187 @@ static int apci1564_do_insn_bits(struct comedi_device *dev, ...@@ -51,34 +86,187 @@ static int apci1564_do_insn_bits(struct comedi_device *dev,
return insn->n; return insn->n;
} }
static int apci1564_reset(struct comedi_device *dev) /*
* Change-Of-State (COS) interrupt configuration
*
* Channels 0 to 15 are interruptible. These channels can be configured
* to generate interrupts based on AND/OR logic for the desired channels.
*
* OR logic
* - reacts to rising or falling edges
* - interrupt is generated when any enabled channel
* meet the desired interrupt condition
*
* AND logic
* - reacts to changes in level of the selected inputs
* - interrupt is generated when all enabled channels
* meet the desired interrupt condition
* - after an interrupt, a change in level must occur on
* the selected inputs to release the IRQ logic
*
* The COS interrupt must be configured before it can be enabled.
*
* data[0] : INSN_CONFIG_DIGITAL_TRIG
* data[1] : trigger number (= 0)
* data[2] : configuration operation:
* COMEDI_DIGITAL_TRIG_DISABLE = no interrupts
* COMEDI_DIGITAL_TRIG_ENABLE_EDGES = OR (edge) interrupts
* COMEDI_DIGITAL_TRIG_ENABLE_LEVELS = AND (level) interrupts
* data[3] : left-shift for data[4] and data[5]
* data[4] : rising-edge/high level channels
* data[5] : falling-edge/low level channels
*/
static int apci1564_cos_insn_config(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{ {
struct apci1564_private *devpriv = dev->private; struct apci1564_private *devpriv = dev->private;
unsigned int shift, oldmask;
switch (data[0]) {
case INSN_CONFIG_DIGITAL_TRIG:
if (data[1] != 0)
return -EINVAL;
shift = data[3];
oldmask = (1U << shift) - 1;
switch (data[2]) {
case COMEDI_DIGITAL_TRIG_DISABLE:
devpriv->ctrl = 0;
devpriv->mode1 = 0;
devpriv->mode2 = 0;
apci1564_reset(dev);
break;
case COMEDI_DIGITAL_TRIG_ENABLE_EDGES:
if (devpriv->ctrl != (APCI1564_DI_INT_ENABLE |
APCI1564_DI_INT_OR)) {
/* switching to 'OR' mode */
devpriv->ctrl = APCI1564_DI_INT_ENABLE |
APCI1564_DI_INT_OR;
/* wipe old channels */
devpriv->mode1 = 0;
devpriv->mode2 = 0;
} else {
/* preserve unspecified channels */
devpriv->mode1 &= oldmask;
devpriv->mode2 &= oldmask;
}
/* configure specified channels */
devpriv->mode1 |= data[4] << shift;
devpriv->mode2 |= data[5] << shift;
break;
case COMEDI_DIGITAL_TRIG_ENABLE_LEVELS:
if (devpriv->ctrl != (APCI1564_DI_INT_ENABLE |
APCI1564_DI_INT_AND)) {
/* switching to 'AND' mode */
devpriv->ctrl = APCI1564_DI_INT_ENABLE |
APCI1564_DI_INT_AND;
/* wipe old channels */
devpriv->mode1 = 0;
devpriv->mode2 = 0;
} else {
/* preserve unspecified channels */
devpriv->mode1 &= oldmask;
devpriv->mode2 &= oldmask;
}
/* configure specified channels */
devpriv->mode1 |= data[4] << shift;
devpriv->mode2 |= data[5] << shift;
break;
default:
return -EINVAL;
}
break;
default:
return -EINVAL;
}
return insn->n;
}
devpriv->do_int_type = 0; static int apci1564_cos_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
data[1] = s->state;
/* Disable the input interrupts and reset status register */ return 0;
outl(0x0, devpriv->amcc_iobase + APCI1564_DI_IRQ_REG); }
inl(devpriv->amcc_iobase + APCI1564_DI_INT_STATUS_REG);
outl(0x0, devpriv->amcc_iobase + APCI1564_DI_INT_MODE1_REG);
outl(0x0, devpriv->amcc_iobase + APCI1564_DI_INT_MODE2_REG);
/* Reset the output channels and disable interrupts */ static int apci1564_cos_cmdtest(struct comedi_device *dev,
outl(0x0, devpriv->amcc_iobase + APCI1564_DO_REG); struct comedi_subdevice *s,
outl(0x0, devpriv->amcc_iobase + APCI1564_DO_INT_CTRL_REG); struct comedi_cmd *cmd)
{
int err = 0;
/* Reset the watchdog registers */ /* Step 1 : check if triggers are trivially valid */
addi_watchdog_reset(devpriv->amcc_iobase + APCI1564_WDOG_REG);
/* Reset the timer registers */ err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW);
outl(0x0, devpriv->amcc_iobase + APCI1564_TIMER_CTRL_REG); err |= cfc_check_trigger_src(&cmd->scan_begin_src, TRIG_EXT);
outl(0x0, devpriv->amcc_iobase + APCI1564_TIMER_RELOAD_REG); err |= cfc_check_trigger_src(&cmd->convert_src, TRIG_FOLLOW);
err |= cfc_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
err |= cfc_check_trigger_src(&cmd->stop_src, TRIG_NONE);
/* Reset the counter registers */ if (err)
outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER1)); return 1;
outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER2));
outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER3)); /* Step 2a : make sure trigger sources are unique */
outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER4)); /* Step 2b : and mutually compatible */
if (err)
return 2;
/* Step 3: check if arguments are trivially valid */
err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
/* step 4: ignored */
if (err)
return 4;
return 0;
}
/*
* Change-Of-State (COS) 'do_cmd' operation
*
* Enable the COS interrupt as configured by apci1564_cos_insn_config().
*/
static int apci1564_cos_cmd(struct comedi_device *dev,
struct comedi_subdevice *s)
{
struct apci1564_private *devpriv = dev->private;
if (!devpriv->ctrl) {
dev_warn(dev->class_dev,
"Interrupts disabled due to mode configuration!\n");
return -EINVAL;
}
outl(devpriv->mode1, devpriv->amcc_iobase + APCI1564_DI_INT_MODE1_REG);
outl(devpriv->mode2, devpriv->amcc_iobase + APCI1564_DI_INT_MODE2_REG);
outl(devpriv->ctrl, devpriv->amcc_iobase + APCI1564_DI_IRQ_REG);
return 0;
}
static int apci1564_cos_cancel(struct comedi_device *dev,
struct comedi_subdevice *s)
{
struct apci1564_private *devpriv = dev->private;
outl(0x0, devpriv->amcc_iobase + APCI1564_DI_IRQ_REG);
inl(devpriv->amcc_iobase + APCI1564_DI_INT_STATUS_REG);
outl(0x0, devpriv->amcc_iobase + APCI1564_DI_INT_MODE1_REG);
outl(0x0, devpriv->amcc_iobase + APCI1564_DI_INT_MODE2_REG);
return 0; return 0;
} }
...@@ -113,7 +301,7 @@ static int apci1564_auto_attach(struct comedi_device *dev, ...@@ -113,7 +301,7 @@ static int apci1564_auto_attach(struct comedi_device *dev,
dev->irq = pcidev->irq; dev->irq = pcidev->irq;
} }
ret = comedi_alloc_subdevices(dev, 3); ret = comedi_alloc_subdevices(dev, 4);
if (ret) if (ret)
return ret; return ret;
...@@ -125,7 +313,6 @@ static int apci1564_auto_attach(struct comedi_device *dev, ...@@ -125,7 +313,6 @@ static int apci1564_auto_attach(struct comedi_device *dev,
s->maxdata = 1; s->maxdata = 1;
s->len_chanlist = 32; s->len_chanlist = 32;
s->range_table = &range_digital; s->range_table = &range_digital;
s->insn_config = apci1564_di_config;
s->insn_bits = apci1564_di_insn_bits; s->insn_bits = apci1564_di_insn_bits;
/* Allocate and Initialise DO Subdevice Structures */ /* Allocate and Initialise DO Subdevice Structures */
...@@ -152,6 +339,25 @@ static int apci1564_auto_attach(struct comedi_device *dev, ...@@ -152,6 +339,25 @@ static int apci1564_auto_attach(struct comedi_device *dev,
s->insn_read = apci1564_timer_read; s->insn_read = apci1564_timer_read;
s->insn_config = apci1564_timer_config; s->insn_config = apci1564_timer_config;
/* Change-Of-State (COS) interrupt subdevice */
s = &dev->subdevices[3];
if (dev->irq) {
dev->read_subdev = s;
s->type = COMEDI_SUBD_DI;
s->subdev_flags = SDF_READABLE | SDF_CMD_READ;
s->n_chan = 1;
s->maxdata = 1;
s->range_table = &range_digital;
s->len_chanlist = 1;
s->insn_config = apci1564_cos_insn_config;
s->insn_bits = apci1564_cos_insn_bits;
s->do_cmdtest = apci1564_cos_cmdtest;
s->do_cmd = apci1564_cos_cmd;
s->cancel = apci1564_cos_cancel;
} else {
s->type = COMEDI_SUBD_UNUSED;
}
return 0; return 0;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment