Skip to content

L
linux
Commit 1e63dca7 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'mmc-4.2-rc3' of git://git.linaro.org/people/ulf.hansson/mmc 

Pull MMC fixes from Ulf Hansson:
 "Here are some mmc fixes intended for v4.2 rc4.

  Note, most of the changes are for the sdhci-esdhc-imx controller,
  which also required us to modify some related DTS files.  Those
  changes have been acked by the SoC maintainer.

  MMC core:
   - Fix a reference inbalance issue for power_ro_lock_show() sysfs handler

  MMC host:
   - omap_hsmmc: Fix IRQ errorhandling for CD, DTO, and CRC
   - sdhci: Prevent a kernel panic while using DMA
   - mtk-sd: Let it depend on HAS_DMA to prevent build errors
   - sdhci-esdhc: Make 8BIT bus work
   - sdhci-esdhc-imx: Fix some regressions for DT based platforms
   - sdhci-pxav3: Fix a regression for DT based platforms"

* tag 'mmc-4.2-rc3' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: sdhci-pxav3: fix platform_data is not initialized
  dts: mmc: fsl-imx-esdhc: remove fsl,cd-controller support
  mmc: sdhci-esdhc-imx: clear f_max in boarddata
  mmc: sdhci-esdhc-imx: remove duplicated dts parsing
  mmc: sdhci: make max-frequency property in device tree work
  mmc: sdhci-esdhc-imx: move all non dt probe code into one function
  mmc: sdhci-esdhc-imx: fix cd regression for dt platform
  dts: imx7: fix sd card gpio polarity specified in device tree
  dts: imx25: fix sd card gpio polarity specified in device tree
  dts: imx6: fix sd card gpio polarity specified in device tree
  dts: imx53: fix sd card gpio polarity specified in device tree
  dts: imx51: fix sd card gpio polarity specified in device tree
  mmc: sdhci-esdhc: Make 8BIT bus work
  mmc: block: Add missing mmc_blk_put() in power_ro_lock_show()
  mmc: MMC_MTK should depend on HAS_DMA
  mmc: sdhci check parameters before call dma_free_coherent
  mmc: omap_hsmmc: Handle BADA, DEB and CEB interrupts
  mmc: omap_hsmmc: Fix DTO and DCRC handling
parents a52bd79e 9cd76049
Show whitespace changes
Inline Side-by-side
Showing with 202 additions and 187 deletions
Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
View file @ 1e63dca7
......@@ -17,7 +17,6 @@ Required properties:
"fsl,imx6sx-usdhc"
Optional properties:
- fsl,cd-controller : Indicate to use controller internal card detection
- fsl,wp-controller : Indicate to use controller internal write protection
- fsl,delay-line : Specify the number of delay cells for override mode.
This is used to set the clock delay for DLL(Delay Line) on override mode
......@@ -35,7 +34,6 @@ esdhc@70004000 {
compatible = "fsl,imx51-esdhc";
reg = <0x70004000 0x4000>;
interrupts = <1>;
fsl,cd-controller;
fsl,wp-controller;
};
......
arch/arm/boot/dts/imx25-pdk.dts
View file @ 1e63dca7
......@@ -10,6 +10,7 @@
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "imx25.dtsi"
......@@ -114,8 +115,8 @@ &can1 {
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio2 1 0>;
wp-gpios = <&gpio2 0 0>;
cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
status = "okay";
};
......
arch/arm/boot/dts/imx51-apf51dev.dts
View file @ 1e63dca7
......@@ -98,7 +98,7 @@ &ecspi2 {
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
bus-width = <4>;
status = "okay";
};
......
arch/arm/boot/dts/imx53-ard.dts
View file @ 1e63dca7
......@@ -103,8 +103,8 @@ volume-down {
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio1 1 0>;
wp-gpios = <&gpio1 9 0>;
cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
status = "okay";
};
......
arch/arm/boot/dts/imx53-m53evk.dts
View file @ 1e63dca7
......@@ -124,8 +124,8 @@ &can2 {
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio1 1 0>;
wp-gpios = <&gpio1 9 0>;
cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
status = "okay";
};
......
arch/arm/boot/dts/imx53-qsb-common.dtsi
View file @ 1e63dca7
......@@ -147,8 +147,8 @@ &ssi2 {
&esdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc3>;
cd-gpios = <&gpio3 11 0>;
wp-gpios = <&gpio3 12 0>;
cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
bus-width = <8>;
status = "okay";
};
......
arch/arm/boot/dts/imx53-smd.dts
View file @ 1e63dca7
......@@ -41,8 +41,8 @@ volume-down {
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio3 13 0>;
wp-gpios = <&gpio4 11 0>;
cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
status = "okay";
};
......
arch/arm/boot/dts/imx53-tqma53.dtsi
View file @ 1e63dca7
......@@ -41,8 +41,8 @@ &esdhc2 {
pinctrl-0 = <&pinctrl_esdhc2>,
<&pinctrl_esdhc2_cdwp>;
vmmc-supply = <&reg_3p3v>;
wp-gpios = <&gpio1 2 0>;
cd-gpios = <&gpio1 4 0>;
wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
status = "disabled";
};
......
arch/arm/boot/dts/imx53-tx53.dtsi
View file @ 1e63dca7
......@@ -183,7 +183,7 @@ spidev1: spi@1 {
};
&esdhc1 {
cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
fsl,wp-controller;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
......@@ -191,7 +191,7 @@ &esdhc1 {
};
&esdhc2 {
cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
fsl,wp-controller;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc2>;
......
arch/arm/boot/dts/imx53-voipac-bsb.dts
View file @ 1e63dca7
......@@ -119,8 +119,8 @@ &audmux {
&esdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc2>;
cd-gpios = <&gpio3 25 0>;
wp-gpios = <&gpio2 19 0>;
cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
......
arch/arm/boot/dts/imx6dl-riotboard.dts
View file @ 1e63dca7
......@@ -305,8 +305,8 @@ &usbotg {
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
cd-gpios = <&gpio1 4 0>;
wp-gpios = <&gpio1 2 0>;
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
......@@ -314,8 +314,8 @@ &usdhc2 {
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
cd-gpios = <&gpio7 0 0>;
wp-gpios = <&gpio7 1 0>;
cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
......
arch/arm/boot/dts/imx6q-arm2.dts
View file @ 1e63dca7
......@@ -11,6 +11,7 @@
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "imx6q.dtsi"
/ {
......@@ -196,8 +197,8 @@ &usbotg {
};
&usdhc3 {
cd-gpios = <&gpio6 11 0>;
wp-gpios = <&gpio6 14 0>;
cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
vmmc-supply = <&reg_3p3v>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3
......
arch/arm/boot/dts/imx6q-gk802.dts
View file @ 1e63dca7
......@@ -7,6 +7,7 @@
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "imx6q.dtsi"
/ {
......@@ -161,7 +162,7 @@ &usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <4>;
cd-gpios = <&gpio6 11 0>;
cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
......
arch/arm/boot/dts/imx6q-tbs2910.dts
View file @ 1e63dca7
......@@ -251,7 +251,7 @@ &usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
......@@ -260,7 +260,7 @@ &usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <4>;
cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
......
arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
View file @ 1e63dca7
......@@ -173,7 +173,7 @@ &usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
vmmc-supply = <&reg_3p3v>;
cd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
status = "okay";
};
......@@ -181,7 +181,7 @@ &usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
vmmc-supply = <&reg_3p3v>;
cd-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
status = "okay";
};
......
arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
View file @ 1e63dca7
......@@ -392,7 +392,7 @@ &usbotg {
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
no-1-8-v;
status = "okay";
};
......@@ -400,7 +400,7 @@ &usdhc1 {
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
cd-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
no-1-8-v;
status = "okay";
......
arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
View file @ 1e63dca7
......@@ -258,6 +258,6 @@ &usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
vmmc-supply = <&reg_3p3v>;
cd-gpios = <&gpio1 4 0>;
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
status = "okay";
};
arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
View file @ 1e63dca7
#include <dt-bindings/gpio/gpio.h>
/ {
regulators {
compatible = "simple-bus";
......@@ -181,7 +183,7 @@ &usbotg {
&usdhc2 { /* module slot */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
cd-gpios = <&gpio2 2 0>;
cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
status = "okay";
};
......
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
View file @ 1e63dca7
......@@ -318,7 +318,7 @@ &usbh1 {
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
......
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
View file @ 1e63dca7
......@@ -324,7 +324,7 @@ &usbh1 {
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
......
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
View file @ 1e63dca7
......@@ -417,7 +417,7 @@ &usbh1 {
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
......
arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
View file @ 1e63dca7
......@@ -299,6 +299,6 @@ &pinctrl_hummingboard_usdhc2_aux
&pinctrl_hummingboard_usdhc2
>;
vmmc-supply = <&reg_3p3v>;
cd-gpios = <&gpio1 4 0>;
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
status = "okay";
};
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
View file @ 1e63dca7
......@@ -453,7 +453,7 @@ &usbotg {
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
cd-gpios = <&gpio7 0 0>;
cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
......@@ -461,7 +461,7 @@ &usdhc3 {
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
cd-gpios = <&gpio2 6 0>;
cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
View file @ 1e63dca7
......@@ -409,8 +409,8 @@ &usbotg {
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
cd-gpios = <&gpio1 4 0>;
wp-gpios = <&gpio1 2 0>;
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
......@@ -418,7 +418,7 @@ &usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3
&pinctrl_usdhc3_cdwp>;
cd-gpios = <&gpio1 27 0>;
wp-gpios = <&gpio1 29 0>;
cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
arch/arm/boot/dts/imx6qdl-rex.dtsi
View file @ 1e63dca7
......@@ -342,7 +342,7 @@ &usdhc2 {
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
......@@ -351,6 +351,6 @@ &usdhc3 {
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <4>;
cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
View file @ 1e63dca7
......@@ -467,8 +467,8 @@ &usdhc3 {
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
cd-gpios = <&gpio6 15 0>;
wp-gpios = <&gpio1 13 0>;
cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
status = "okay";
};
......
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
View file @ 1e63dca7
......@@ -448,8 +448,8 @@ &usbotg {
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
cd-gpios = <&gpio7 0 0>;
wp-gpios = <&gpio7 1 0>;
cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
......@@ -457,7 +457,7 @@ &usdhc3 {
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
cd-gpios = <&gpio2 6 0>;
cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
arch/arm/boot/dts/imx6qdl-sabresd.dtsi
View file @ 1e63dca7
......@@ -562,8 +562,8 @@ &usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <8>;
cd-gpios = <&gpio2 2 0>;
wp-gpios = <&gpio2 3 0>;
cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
......@@ -571,8 +571,8 @@ &usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <8>;
cd-gpios = <&gpio2 0 0>;
wp-gpios = <&gpio2 1 0>;
cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
......
arch/arm/boot/dts/imx6qdl-tx6.dtsi
View file @ 1e63dca7
......@@ -680,7 +680,7 @@ &usdhc1 {
pinctrl-0 = <&pinctrl_usdhc1>;
bus-width = <4>;
no-1-8-v;
cd-gpios = <&gpio7 2 0>;
cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
fsl,wp-controller;
status = "okay";
};
......@@ -690,7 +690,7 @@ &usdhc2 {
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
no-1-8-v;
cd-gpios = <&gpio7 3 0>;
cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
fsl,wp-controller;
status = "okay";
};
arch/arm/boot/dts/imx6qdl-wandboard.dtsi
View file @ 1e63dca7
......@@ -9,6 +9,8 @@
*
*/
#include <dt-bindings/gpio/gpio.h>
/ {
regulators {
compatible = "simple-bus";
......@@ -250,13 +252,13 @@ &usbotg {
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio1 2 0>;
cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
cd-gpios = <&gpio3 9 0>;
cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
status = "okay";
};
arch/arm/boot/dts/imx6sl-evk.dts
View file @ 1e63dca7
......@@ -617,8 +617,8 @@ &usdhc1 {
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
bus-width = <8>;
cd-gpios = <&gpio4 7 0>;
wp-gpios = <&gpio4 6 0>;
cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
status = "okay";
};
......@@ -627,8 +627,8 @@ &usdhc2 {
pinctrl-0 = <&pinctrl_usdhc2>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
cd-gpios = <&gpio5 0 0>;
wp-gpios = <&gpio4 29 0>;
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
status = "okay";
};
......@@ -637,6 +637,6 @@ &usdhc3 {
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
cd-gpios = <&gpio3 22 0>;
cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
status = "okay";
};
arch/arm/boot/dts/imx6sx-sabreauto.dts
View file @ 1e63dca7
......@@ -49,7 +49,7 @@ &usdhc3 {
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
bus-width = <8>;
cd-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
keep-power-in-suspend;
enable-sdio-wakeup;
......@@ -61,7 +61,7 @@ &usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
bus-width = <8>;
cd-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
no-1-8-v;
keep-power-in-suspend;
enable-sdio-wakup;
......
arch/arm/boot/dts/imx6sx-sdb.dtsi
View file @ 1e63dca7
......@@ -293,7 +293,7 @@ &usdhc3 {
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
bus-width = <8>;
cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
keep-power-in-suspend;
enable-sdio-wakeup;
......@@ -304,7 +304,7 @@ &usdhc3 {
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
status = "okay";
};
......
arch/arm/boot/dts/imx7d-sdb.dts
View file @ 1e63dca7
......@@ -234,8 +234,8 @@ &uart1 {
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio5 0 0>;
wp-gpios = <&gpio5 1 0>;
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
enable-sdio-wakeup;
keep-power-in-suspend;
status = "okay";
......
drivers/mmc/card/block.c
View file @ 1e63dca7
......@@ -208,6 +208,8 @@ static ssize_t power_ro_lock_show(struct device *dev,
ret = snprintf(buf, PAGE_SIZE, "%d\n", locked);
mmc_blk_put(md);
return ret;
}
......
drivers/mmc/host/Kconfig
View file @ 1e63dca7
......@@ -779,6 +779,7 @@ config MMC_TOSHIBA_PCI
config MMC_MTK
tristate "MediaTek SD/MMC Card Interface support"
depends on HAS_DMA
help
This selects the MediaTek(R) Secure digital and Multimedia card Interface.
If you have a machine with a integrated SD/MMC card reader, say Y or M here.
......
drivers/mmc/host/omap_hsmmc.c
View file @ 1e63dca7
......@@ -1062,9 +1062,14 @@ static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status)
if (status & (CTO_EN | CCRC_EN))
end_cmd = 1;
if (host->data || host->response_busy) {
end_trans = !end_cmd;
host->response_busy = 0;
}
if (status & (CTO_EN | DTO_EN))
hsmmc_command_incomplete(host, -ETIMEDOUT, end_cmd);
else if (status & (CCRC_EN | DCRC_EN))
else if (status & (CCRC_EN | DCRC_EN | DEB_EN | CEB_EN |
BADA_EN))
hsmmc_command_incomplete(host, -EILSEQ, end_cmd);
if (status & ACE_EN) {
......@@ -1081,10 +1086,6 @@ static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status)
}
dev_dbg(mmc_dev(host->mmc), "AC12 err: 0x%x\n", ac12);
}
if (host->data || host->response_busy) {
end_trans = !end_cmd;
host->response_busy = 0;
}
}
OMAP_HSMMC_WRITE(host->base, STAT, status);
......
drivers/mmc/host/sdhci-esdhc-imx.c
View file @ 1e63dca7
......@@ -581,12 +581,7 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = pltfm_host->priv;
struct esdhc_platform_data *boarddata = &imx_data->boarddata;
if (boarddata->f_max && (boarddata->f_max < pltfm_host->clock))
return boarddata->f_max;
else
return pltfm_host->clock;
}
......@@ -878,34 +873,19 @@ static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
static int
sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
struct sdhci_host *host,
struct esdhc_platform_data *boarddata)
struct pltfm_imx_data *imx_data)
{
struct device_node *np = pdev->dev.of_node;
if (!np)
return -ENODEV;
if (of_get_property(np, "non-removable", NULL))
boarddata->cd_type = ESDHC_CD_PERMANENT;
if (of_get_property(np, "fsl,cd-controller", NULL))
boarddata->cd_type = ESDHC_CD_CONTROLLER;
struct esdhc_platform_data *boarddata = &imx_data->boarddata;
int ret;
if (of_get_property(np, "fsl,wp-controller", NULL))
boarddata->wp_type = ESDHC_WP_CONTROLLER;
boarddata->cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
if (gpio_is_valid(boarddata->cd_gpio))
boarddata->cd_type = ESDHC_CD_GPIO;
boarddata->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
if (gpio_is_valid(boarddata->wp_gpio))
boarddata->wp_type = ESDHC_WP_GPIO;
of_property_read_u32(np, "bus-width", &boarddata->max_bus_width);
of_property_read_u32(np, "max-frequency", &boarddata->f_max);
if (of_find_property(np, "no-1-8-v", NULL))
boarddata->support_vsel = false;
else
......@@ -916,29 +896,119 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
mmc_of_parse_voltage(np, &host->ocr_mask);
/* sdr50 and sdr104 needs work on 1.8v signal voltage */
if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) &&
!IS_ERR(imx_data->pins_default)) {
imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl,
ESDHC_PINCTRL_STATE_100MHZ);
imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl,
ESDHC_PINCTRL_STATE_200MHZ);
if (IS_ERR(imx_data->pins_100mhz) ||
IS_ERR(imx_data->pins_200mhz)) {
dev_warn(mmc_dev(host->mmc),
"could not get ultra high speed state, work on normal mode\n");
/*
* fall back to not support uhs by specify no 1.8v quirk
*/
host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
}
} else {
host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
}
/* call to generic mmc_of_parse to support additional capabilities */
return mmc_of_parse(host->mmc);
ret = mmc_of_parse(host->mmc);
if (ret)
return ret;
if (!IS_ERR_VALUE(mmc_gpio_get_cd(host->mmc)))
host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
return 0;
}
#else
static inline int
sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
struct sdhci_host *host,
struct esdhc_platform_data *boarddata)
struct pltfm_imx_data *imx_data)
{
return -ENODEV;
}
#endif
static int sdhci_esdhc_imx_probe_nondt(struct platform_device *pdev,
struct sdhci_host *host,
struct pltfm_imx_data *imx_data)
{
struct esdhc_platform_data *boarddata = &imx_data->boarddata;
int err;
if (!host->mmc->parent->platform_data) {
dev_err(mmc_dev(host->mmc), "no board data!\n");
return -EINVAL;
}
imx_data->boarddata = *((struct esdhc_platform_data *)
host->mmc->parent->platform_data);
/* write_protect */
if (boarddata->wp_type == ESDHC_WP_GPIO) {
err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio);
if (err) {
dev_err(mmc_dev(host->mmc),
"failed to request write-protect gpio!\n");
return err;
}
host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
}
/* card_detect */
switch (boarddata->cd_type) {
case ESDHC_CD_GPIO:
err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio, 0);
if (err) {
dev_err(mmc_dev(host->mmc),
"failed to request card-detect gpio!\n");
return err;
}
/* fall through */
case ESDHC_CD_CONTROLLER:
/* we have a working card_detect back */
host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
break;
case ESDHC_CD_PERMANENT:
host->mmc->caps |= MMC_CAP_NONREMOVABLE;
break;
case ESDHC_CD_NONE:
break;
}
switch (boarddata->max_bus_width) {
case 8:
host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA;
break;
case 4:
host->mmc->caps |= MMC_CAP_4_BIT_DATA;
break;
case 1:
default:
host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
break;
}
return 0;
}
static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id =
of_match_device(imx_esdhc_dt_ids, &pdev->dev);
struct sdhci_pltfm_host *pltfm_host;
struct sdhci_host *host;
struct esdhc_platform_data *boarddata;
int err;
struct pltfm_imx_data *imx_data;
bool dt = true;
host = sdhci_pltfm_init(pdev, &sdhci_esdhc_imx_pdata, 0);
if (IS_ERR(host))
......@@ -1030,84 +1100,12 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
if (imx_data->socdata->flags & ESDHC_FLAG_ERR004536)
host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
boarddata = &imx_data->boarddata;
if (sdhci_esdhc_imx_probe_dt(pdev, host, boarddata) < 0) {
if (!host->mmc->parent->platform_data) {
dev_err(mmc_dev(host->mmc), "no board data!\n");
err = -EINVAL;
goto disable_clk;
}
imx_data->boarddata = *((struct esdhc_platform_data *)
host->mmc->parent->platform_data);
dt = false;
}
/* write_protect */
if (boarddata->wp_type == ESDHC_WP_GPIO && !dt) {
err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio);
if (err) {
dev_err(mmc_dev(host->mmc),
"failed to request write-protect gpio!\n");
goto disable_clk;
}
host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
}
/* card_detect */
switch (boarddata->cd_type) {
case ESDHC_CD_GPIO:
if (dt)
break;
err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio, 0);
if (err) {
dev_err(mmc_dev(host->mmc),
"failed to request card-detect gpio!\n");
if (of_id)
err = sdhci_esdhc_imx_probe_dt(pdev, host, imx_data);
else
err = sdhci_esdhc_imx_probe_nondt(pdev, host, imx_data);
if (err)
goto disable_clk;
}
/* fall through */
case ESDHC_CD_CONTROLLER:
/* we have a working card_detect back */
host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
break;
case ESDHC_CD_PERMANENT:
host->mmc->caps |= MMC_CAP_NONREMOVABLE;
break;
case ESDHC_CD_NONE:
break;
}
switch (boarddata->max_bus_width) {
case 8:
host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA;
break;
case 4:
host->mmc->caps |= MMC_CAP_4_BIT_DATA;
break;
case 1:
default:
host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
break;
}
/* sdr50 and sdr104 needs work on 1.8v signal voltage */
if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) &&
!IS_ERR(imx_data->pins_default)) {
imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl,
ESDHC_PINCTRL_STATE_100MHZ);
imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl,
ESDHC_PINCTRL_STATE_200MHZ);
if (IS_ERR(imx_data->pins_100mhz) ||
IS_ERR(imx_data->pins_200mhz)) {
dev_warn(mmc_dev(host->mmc),
"could not get ultra high speed state, work on normal mode\n");
/* fall back to not support uhs by specify no 1.8v quirk */
host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
}
} else {
host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
}
err = sdhci_add_host(host);
if (err)
......
drivers/mmc/host/sdhci-esdhc.h
View file @ 1e63dca7
......@@ -45,6 +45,6 @@
#define ESDHC_DMA_SYSCTL 0x40c
#define ESDHC_DMA_SNOOP 0x00000040
#define ESDHC_HOST_CONTROL_RES 0x05
#define ESDHC_HOST_CONTROL_RES 0x01
#endif /* _DRIVERS_MMC_SDHCI_ESDHC_H */
drivers/mmc/host/sdhci-pxav3.c
View file @ 1e63dca7
......@@ -411,6 +411,7 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
goto err_of_parse;
sdhci_get_of_property(pdev);
pdata = pxav3_get_mmc_pdata(dev);
pdev->dev.platform_data = pdata;
} else if (pdata) {
/* on-chip device */
if (pdata->flags & PXA_FLAG_CARD_PERMANENT)
......
drivers/mmc/host/sdhci.c
View file @ 1e63dca7
......@@ -2866,6 +2866,7 @@ int sdhci_add_host(struct sdhci_host *host)
u32 max_current_caps;
unsigned int ocr_avail;
unsigned int override_timeout_clk;
u32 max_clk;
int ret;
WARN_ON(host == NULL);
......@@ -2978,8 +2979,11 @@ int sdhci_add_host(struct sdhci_host *host)
GFP_KERNEL);
host->align_buffer = kmalloc(host->align_buffer_sz, GFP_KERNEL);
if (!host->adma_table || !host->align_buffer) {
dma_free_coherent(mmc_dev(mmc), host->adma_table_sz,
host->adma_table, host->adma_addr);
if (host->adma_table)
dma_free_coherent(mmc_dev(mmc),
host->adma_table_sz,
host->adma_table,
host->adma_addr);
kfree(host->align_buffer);
pr_warn("%s: Unable to allocate ADMA buffers - falling back to standard DMA\n",
mmc_hostname(mmc));
......@@ -3047,18 +3051,22 @@ int sdhci_add_host(struct sdhci_host *host)
* Set host parameters.
*/
mmc->ops = &sdhci_ops;
mmc->f_max = host->max_clk;
max_clk = host->max_clk;
if (host->ops->get_min_clock)
mmc->f_min = host->ops->get_min_clock(host);
else if (host->version >= SDHCI_SPEC_300) {
if (host->clk_mul) {
mmc->f_min = (host->max_clk * host->clk_mul) / 1024;
mmc->f_max = host->max_clk * host->clk_mul;
max_clk = host->max_clk * host->clk_mul;
} else
mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
} else
mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
if (!mmc->f_max || (mmc->f_max && (mmc->f_max > max_clk)))
mmc->f_max = max_clk;
if (!(host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
host->timeout_clk = (caps[0] & SDHCI_TIMEOUT_CLK_MASK) >>
SDHCI_TIMEOUT_CLK_SHIFT;
......
include/linux/platform_data/mmc-esdhc-imx.h
View file @ 1e63dca7
......@@ -43,7 +43,6 @@ struct esdhc_platform_data {
enum wp_types wp_type;
enum cd_types cd_type;
int max_bus_width;
unsigned int f_max;
bool support_vsel;
unsigned int delay_line;
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7