iio: move 3-wire spi initialization to st_sensors_spi

Some devices need to be configured with special bit in order to
use spi 3-wire. This was done during device identification phase.
Instead, let's move this part as spi specific.
Doing this the check_device_support function becomes a simple
device id check, so let's rename it.
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/accel/st_accel_core.c

@@ -1183,9 +1183,7 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
 	if (err)
 		return err;
 
-	err = st_sensors_check_device_support(indio_dev,
-					ARRAY_SIZE(st_accel_sensors_settings),
-					st_accel_sensors_settings);
+	err = st_sensors_verify_id(indio_dev);
 	if (err < 0)
 		goto st_accel_power_off;
 

drivers/iio/accel/st_accel_spi.c

@@ -124,7 +124,9 @@ static int st_accel_spi_probe(struct spi_device *spi)
 	adata = iio_priv(indio_dev);
 	adata->sensor_settings = (struct st_sensor_settings *)settings;
 
-	st_sensors_spi_configure(indio_dev, spi, adata);
+	err = st_sensors_spi_configure(indio_dev, spi);
+	if (err < 0)
+		return err;
 
 	err = st_accel_common_probe(indio_dev);
 	if (err < 0)

drivers/iio/common/st_sensors/st_sensors_core.c

@@ -608,31 +608,6 @@ int st_sensors_read_info_raw(struct iio_dev *indio_dev,
 }
 EXPORT_SYMBOL(st_sensors_read_info_raw);
 
-static int st_sensors_init_interface_mode(struct iio_dev *indio_dev,
-			const struct st_sensor_settings *sensor_settings)
-{
-	struct st_sensor_data *sdata = iio_priv(indio_dev);
-	struct device_node *np = sdata->dev->of_node;
-	struct st_sensors_platform_data *pdata;
-
-	pdata = (struct st_sensors_platform_data *)sdata->dev->platform_data;
-	if (((np && of_property_read_bool(np, "spi-3wire")) ||
-	     (pdata && pdata->spi_3wire)) && sensor_settings->sim.addr) {
-		int err;
-
-		err = sdata->tf->write_byte(&sdata->tb, sdata->dev,
-					    sensor_settings->sim.addr,
-					    sensor_settings->sim.value);
-		if (err < 0) {
-			dev_err(&indio_dev->dev,
-				"failed to init interface mode\n");
-			return err;
-		}
-	}
-
-	return 0;
-}
-
 /*
  * st_sensors_get_settings_index() - get index of the sensor settings for a
  *				     specific device from list of settings
@@ -660,36 +635,30 @@ int st_sensors_get_settings_index(const char *name,
 }
 EXPORT_SYMBOL(st_sensors_get_settings_index);
 
-int st_sensors_check_device_support(struct iio_dev *indio_dev,
-			int num_sensors_list,
-			const struct st_sensor_settings *sensor_settings)
+/*
+ * st_sensors_verify_id() - verify sensor ID (WhoAmI) is matching with the
+ *			    expected value
+ * @indio_dev: IIO device reference.
+ *
+ * Return: 0 on success (valid sensor ID), else a negative error code.
+ */
+int st_sensors_verify_id(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
-	int i, err;
+	int err;
 	u8 wai;
 
-	i = st_sensors_get_settings_index(indio_dev->name,
-					  sensor_settings, num_sensors_list);
-	if (i < 0) {
-		dev_err(&indio_dev->dev, "device name %s not recognized.\n",
-			indio_dev->name);
-		return i;
-	}
-
-	err = st_sensors_init_interface_mode(indio_dev, &sensor_settings[i]);
-	if (err < 0)
-		return err;
-
-	if (sensor_settings[i].wai_addr) {
+	if (sdata->sensor_settings->wai_addr) {
 		err = sdata->tf->read_byte(&sdata->tb, sdata->dev,
-					   sensor_settings[i].wai_addr, &wai);
+					   sdata->sensor_settings->wai_addr,
+					   &wai);
 		if (err < 0) {
 			dev_err(&indio_dev->dev,
 				"failed to read Who-Am-I register.\n");
 			return err;
 		}
 
-		if (sensor_settings[i].wai != wai) {
+		if (sdata->sensor_settings->wai != wai) {
 			dev_err(&indio_dev->dev,
 				"%s: WhoAmI mismatch (0x%x).\n",
 				indio_dev->name, wai);
@@ -697,12 +666,9 @@ int st_sensors_check_device_support(struct iio_dev *indio_dev,
 		}
 	}
 
-	sdata->sensor_settings =
-			(struct st_sensor_settings *)&sensor_settings[i];
-
-	return i;
+	return 0;
 }
-EXPORT_SYMBOL(st_sensors_check_device_support);
+EXPORT_SYMBOL(st_sensors_verify_id);
 
 ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev,
 				struct device_attribute *attr, char *buf)

drivers/iio/common/st_sensors/st_sensors_spi.c

@@ -102,9 +102,68 @@ static const struct st_sensor_transfer_function st_sensors_tf_spi = {
 	.read_multiple_byte = st_sensors_spi_read_multiple_byte,
 };
 
-void st_sensors_spi_configure(struct iio_dev *indio_dev,
-			struct spi_device *spi, struct st_sensor_data *sdata)
+/*
+ * st_sensors_is_spi_3_wire() - check if SPI 3-wire mode has been selected
+ * @spi: spi device reference.
+ *
+ * Return: true if SPI 3-wire mode is selected, false otherwise.
+ */
+static bool st_sensors_is_spi_3_wire(struct spi_device *spi)
 {
+	struct device_node *np = spi->dev.of_node;
+	struct st_sensors_platform_data *pdata;
+
+	pdata = (struct st_sensors_platform_data *)spi->dev.platform_data;
+	if ((np && of_property_read_bool(np, "spi-3wire")) ||
+	    (pdata && pdata->spi_3wire)) {
+		return true;
+	}
+
+	return false;
+}
+
+/*
+ * st_sensors_configure_spi_3_wire() - configure SPI 3-wire if needed
+ * @spi: spi device reference.
+ * @settings: sensor specific settings reference.
+ *
+ * Return: 0 on success, else a negative error code.
+ */
+static int st_sensors_configure_spi_3_wire(struct spi_device *spi,
+					   struct st_sensor_settings *settings)
+{
+	if (settings->sim.addr) {
+		u8 buffer[] = {
+			settings->sim.addr,
+			settings->sim.value
+		};
+
+		return spi_write(spi, buffer, 2);
+	}
+
+	return 0;
+}
+
+/*
+ * st_sensors_spi_configure() - configure SPI interface
+ * @indio_dev: IIO device reference.
+ * @spi: spi device reference.
+ *
+ * Return: 0 on success, else a negative error code.
+ */
+int st_sensors_spi_configure(struct iio_dev *indio_dev,
+			     struct spi_device *spi)
+{
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	int err;
+
+	if (st_sensors_is_spi_3_wire(spi)) {
+		err = st_sensors_configure_spi_3_wire(spi,
+						      sdata->sensor_settings);
+		if (err < 0)
+			return err;
+	}
+
 	spi_set_drvdata(spi, indio_dev);
 
 	indio_dev->dev.parent = &spi->dev;
@@ -113,6 +172,8 @@ void st_sensors_spi_configure(struct iio_dev *indio_dev,
 	sdata->dev = &spi->dev;
 	sdata->tf = &st_sensors_tf_spi;
 	sdata->get_irq_data_ready = st_sensors_spi_get_irq;
+
+	return 0;
 }
 EXPORT_SYMBOL(st_sensors_spi_configure);
 

drivers/iio/gyro/st_gyro_core.c

@@ -400,9 +400,7 @@ int st_gyro_common_probe(struct iio_dev *indio_dev)
 	if (err)
 		return err;
 
-	err = st_sensors_check_device_support(indio_dev,
-					ARRAY_SIZE(st_gyro_sensors_settings),
-					st_gyro_sensors_settings);
+	err = st_sensors_verify_id(indio_dev);
 	if (err < 0)
 		goto st_gyro_power_off;
 

drivers/iio/gyro/st_gyro_spi.c

@@ -91,7 +91,9 @@ static int st_gyro_spi_probe(struct spi_device *spi)
 	gdata = iio_priv(indio_dev);
 	gdata->sensor_settings = (struct st_sensor_settings *)settings;
 
-	st_sensors_spi_configure(indio_dev, spi, gdata);
+	err = st_sensors_spi_configure(indio_dev, spi);
+	if (err < 0)
+		return err;
 
 	err = st_gyro_common_probe(indio_dev);
 	if (err < 0)

drivers/iio/magnetometer/st_magn_core.c

@@ -502,9 +502,7 @@ int st_magn_common_probe(struct iio_dev *indio_dev)
 	if (err)
 		return err;
 
-	err = st_sensors_check_device_support(indio_dev,
-					ARRAY_SIZE(st_magn_sensors_settings),
-					st_magn_sensors_settings);
+	err = st_sensors_verify_id(indio_dev);
 	if (err < 0)
 		goto st_magn_power_off;
 

drivers/iio/magnetometer/st_magn_spi.c

@@ -73,7 +73,9 @@ static int st_magn_spi_probe(struct spi_device *spi)
 	mdata = iio_priv(indio_dev);
 	mdata->sensor_settings = (struct st_sensor_settings *)settings;
 
-	st_sensors_spi_configure(indio_dev, spi, mdata);
+	err = st_sensors_spi_configure(indio_dev, spi);
+	if (err < 0)
+		return err;
 
 	err = st_magn_common_probe(indio_dev);
 	if (err < 0)

drivers/iio/pressure/st_pressure_core.c

@@ -698,9 +698,7 @@ int st_press_common_probe(struct iio_dev *indio_dev)
 	if (err)
 		return err;
 
-	err = st_sensors_check_device_support(indio_dev,
-					ARRAY_SIZE(st_press_sensors_settings),
-					st_press_sensors_settings);
+	err = st_sensors_verify_id(indio_dev);
 	if (err < 0)
 		goto st_press_power_off;
 

drivers/iio/pressure/st_pressure_spi.c

@@ -83,7 +83,9 @@ static int st_press_spi_probe(struct spi_device *spi)
 	press_data = iio_priv(indio_dev);
 	press_data->sensor_settings = (struct st_sensor_settings *)settings;
 
-	st_sensors_spi_configure(indio_dev, spi, press_data);
+	err = st_sensors_spi_configure(indio_dev, spi);
+	if (err < 0)
+		return err;
 
 	err = st_press_common_probe(indio_dev);
 	if (err < 0)

include/linux/iio/common/st_sensors.h

@@ -338,8 +338,7 @@ int st_sensors_get_settings_index(const char *name,
 				  const struct st_sensor_settings *list,
 				  const int list_length);
 
-int st_sensors_check_device_support(struct iio_dev *indio_dev,
-	int num_sensors_list, const struct st_sensor_settings *sensor_settings);
+int st_sensors_verify_id(struct iio_dev *indio_dev);
 
 ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev,
 				struct device_attribute *attr, char *buf);

include/linux/iio/common/st_sensors_spi.h

@@ -13,7 +13,7 @@
 #include <linux/spi/spi.h>
 #include <linux/iio/common/st_sensors.h>
 
-void st_sensors_spi_configure(struct iio_dev *indio_dev,
-			struct spi_device *spi, struct st_sensor_data *sdata);
+int st_sensors_spi_configure(struct iio_dev *indio_dev,
+			     struct spi_device *spi);
 
 #endif /* ST_SENSORS_SPI_H */