Commit 20a2742e authored by Tony Lindgren's avatar Tony Lindgren

dt-bindings: ti-sysc: Update binding for timers and capabilities

The ti-sysc binding does not yet describe the capabilities of the
interconnect target module. So to make the ti-sysc binding usable
for configuring the interconnect target module, we need to add few
more properties:

1. To detect between omap2 and omap4 timers, let's add compatibles
   for them for "ti,sysc-omap2-timer" and,sysc-omap4-timer". This
   makes it easier to pick up the already initialized system timers
   later on

2. Let's add "ti,sysc-mask" for a mask of features supported by the
   interconnect target module. This describes what we have available
   in the various SYSCONFIG registers

3. Let's add "ti,sysc-midle" and "ti,sysc-sidle" lists for the master
   and slave idle modes supported by the interconnect target module.
   These describe the values available for MIDLE and SIDLE bits in
   the SYSCONFIG registers

4. Some interconnect target modules need a short delay after reset
   before they can be accessed, let's use "ti,sysc-delay-us" for
   that

5. Let's add "ti,syss-mask" bit to describe the optional SYSSTATUS
   register bits for reset done bits

6. Let's support the two existing custom quirk properties already
   listed in Documentation/devicetree/bindings/arm/omap/omap.txt for
   "ti,no-reset-on-init" and "ti,no-idle-on-init"

7. And finally, let's add a header for the binding for the dts
   files and the driver to use

Cc: Benoît Cousson <bcousson@baylibre.com>
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Nishanth Menon <nm@ti.com>
Cc: Matthijs van Duin <matthijsvanduin@gmail.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Suman Anna <s-anna@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 4fbd8d19
...@@ -26,6 +26,8 @@ Required standard properties: ...@@ -26,6 +26,8 @@ Required standard properties:
or one of the following derivative types for hardware or one of the following derivative types for hardware
needing special workarounds: needing special workarounds:
"ti,sysc-omap2-timer"
"ti,sysc-omap4-timer"
"ti,sysc-omap3430-sr" "ti,sysc-omap3430-sr"
"ti,sysc-omap3630-sr" "ti,sysc-omap3630-sr"
"ti,sysc-omap4-sr" "ti,sysc-omap4-sr"
...@@ -49,6 +51,26 @@ Required standard properties: ...@@ -49,6 +51,26 @@ Required standard properties:
Optional properties: Optional properties:
- ti,sysc-mask shall contain mask of supported register bits for the
SYSCONFIG register as documented in the Technical Reference
Manual (TRM) for the interconnect target module
- ti,sysc-midle list of master idle modes supported by the interconnect
target module as documented in the TRM for SYSCONFIG
register MIDLEMODE bits
- ti,sysc-sidle list of slave idle modes supported by the interconnect
target module as documented in the TRM for SYSCONFIG
register SIDLEMODE bits
- ti,sysc-delay-us delay needed after OCP softreset before accssing
SYSCONFIG register again
- ti,syss-mask optional mask of reset done status bits as described in the
TRM for SYSSTATUS registers, typically 1 with some devices
having separate reset done bits for children like OHCI and
EHCI
- clocks clock specifier for each name in the clock-names as - clocks clock specifier for each name in the clock-names as
specified in the binding documentation for ti-clkctrl, specified in the binding documentation for ti-clkctrl,
typically available for all interconnect targets on TI SoCs typically available for all interconnect targets on TI SoCs
...@@ -61,6 +83,9 @@ Optional properties: ...@@ -61,6 +83,9 @@ Optional properties:
- ti,hwmods optional TI interconnect module name to use legacy - ti,hwmods optional TI interconnect module name to use legacy
hwmod platform data hwmod platform data
- ti,no-reset-on-init interconnect target module should not be reset at init
- ti,no-idle-on-init interconnect target module should not be idled at init
Example: Single instance of MUSB controller on omap4 using interconnect ranges Example: Single instance of MUSB controller on omap4 using interconnect ranges
using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000): using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000):
...@@ -74,6 +99,17 @@ using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000): ...@@ -74,6 +99,17 @@ using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000):
reg-names = "rev", "sysc", "syss"; reg-names = "rev", "sysc", "syss";
clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>; clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
clock-names = "fck"; clock-names = "fck";
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
SYSC_OMAP2_SOFTRESET |
SYSC_OMAP2_AUTOIDLE)>;
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>,
<SYSC_IDLE_SMART_WKUP>;
ti,syss-mask = <1>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
ranges = <0 0x2b000 0x1000>; ranges = <0 0x2b000 0x1000>;
......
/* TI sysc interconnect target module defines */
/* Generic sysc found on omap2 and later, also known as type1 */
#define SYSC_OMAP2_CLOCKACTIVITY (3 << 8)
#define SYSC_OMAP2_EMUFREE (1 << 5)
#define SYSC_OMAP2_ENAWAKEUP (1 << 2)
#define SYSC_OMAP2_SOFTRESET (1 << 1)
#define SYSC_OMAP2_AUTOIDLE (1 << 0)
/* Generic sysc found on omap4 and later, also known as type2 */
#define SYSC_OMAP4_DMADISABLE (1 << 16)
#define SYSC_OMAP4_FREEEMU (1 << 1) /* Also known as EMUFREE */
#define SYSC_OMAP4_SOFTRESET (1 << 0)
/* SmartReflex sysc found on 36xx and later */
#define SYSC_OMAP3_SR_ENAWAKEUP (1 << 26)
/* SYSCONFIG STANDBYMODE/MIDLEMODE/SIDLEMODE supported by hardware */
#define SYSC_IDLE_FORCE 0
#define SYSC_IDLE_NO 1
#define SYSC_IDLE_SMART 2
#define SYSC_IDLE_SMART_WKUP 3
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment