Commit 20b09c29 authored by Andy Yan's avatar Andy Yan Committed by James Bottomley

[SCSI] mvsas: add support for 94xx; layout change; bug fixes

This version contains following main changes
  - Switch to new layout to support more types of ASIC.
  - SSP TMF supported and related Error Handing enhanced.
  - Support flash feature with delay 2*HZ when PHY changed.
  - Support Marvell 94xx series ASIC for 6G SAS/SATA, which has 2
88SE64xx chips but any different register description.
  - Support SPI flash for HBA-related configuration info.
  - Other patch enhanced from kernel side such as increasing PHY type

[jejb: fold back in DMA_BIT_MASK changes]
Signed-off-by: default avatarYing Chu <jasonchu@marvell.com>
Signed-off-by: default avatarAndy Yan <ayan@marvell.com>
Signed-off-by: default avatarKe Wei <kewei@marvell.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
parent dd4969a8
#
# Kernel configuration file for 88SE64XX SAS/SATA driver.
# Kernel configuration file for 88SE64XX/88SE94XX SAS/SATA driver.
#
# Copyright 2007 Red Hat, Inc.
# Copyright 2008 Marvell. <kewei@marvell.com>
#
# This file is licensed under GPLv2.
#
# This file is part of the 88SE64XX driver.
# This file is part of the 88SE64XX/88SE94XX driver.
#
# The 88SE64XX driver is free software; you can redistribute
# The 88SE64XX/88SE94XX driver is free software; you can redistribute
# it and/or modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; version 2 of the
# License.
#
# The 88SE64XX driver is distributed in the hope that it will be
# The 88SE64XX/88SE94XX driver is distributed in the hope that it will be
# useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with 88SE64XX Driver; if not, write to the Free Software
# along with 88SE64XX/88SE94XX Driver; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
#
config SCSI_MVSAS
tristate "Marvell 88SE64XX SAS/SATA support"
tristate "Marvell 88SE64XX/88SE94XX SAS/SATA support"
depends on PCI
select SCSI_SAS_LIBSAS
select FW_LOADER
help
This driver supports Marvell's SAS/SATA 3Gb/s PCI-E 88SE64XX
chip based host adapters.
This driver supports Marvell's SAS/SATA 3Gb/s PCI-E 88SE64XX and 6Gb/s
PCI-E 88SE94XX chip based host adapters.
config SCSI_MVSAS_DEBUG
bool "Compile in debug mode"
default y
depends on SCSI_MVSAS
help
Compiles the 88SE64XX/88SE94XX driver in debug mode. In debug mode,
the driver prints some messages to the console.
#
# Makefile for Marvell 88SE64xx SAS/SATA driver.
# Makefile for Marvell 88SE64xx/88SE84xx SAS/SATA driver.
#
# Copyright 2007 Red Hat, Inc.
# Copyright 2008 Marvell. <kewei@marvell.com>
......@@ -21,7 +21,12 @@
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA
ifeq ($(CONFIG_SCSI_MVSAS_DEBUG),y)
EXTRA_CFLAGS += -DMV_DEBUG
endif
obj-$(CONFIG_SCSI_MVSAS) += mvsas.o
mvsas-y += mv_init.o \
mv_sas.o \
mv_64xx.o
mv_64xx.o \
mv_94xx.o
This diff is collapsed.
/*
* Marvell 88SE64xx hardware specific head file
*
* Copyright 2007 Red Hat, Inc.
* Copyright 2008 Marvell. <kewei@marvell.com>
*
* This file is licensed under GPLv2.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of the
* License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
* USA
*/
#ifndef _MVS64XX_REG_H_
#define _MVS64XX_REG_H_
#include <linux/types.h>
#define MAX_LINK_RATE SAS_LINK_RATE_3_0_GBPS
/* enhanced mode registers (BAR4) */
enum hw_registers {
MVS_GBL_CTL = 0x04, /* global control */
MVS_GBL_INT_STAT = 0x08, /* global irq status */
MVS_GBL_PI = 0x0C, /* ports implemented bitmask */
MVS_PHY_CTL = 0x40, /* SOC PHY Control */
MVS_PORTS_IMP = 0x9C, /* SOC Port Implemented */
MVS_GBL_PORT_TYPE = 0xa0, /* port type */
MVS_CTL = 0x100, /* SAS/SATA port configuration */
......@@ -30,17 +62,19 @@ enum hw_registers {
MVS_INT_COAL_TMOUT = 0x14C, /* Int coalescing timeout */
MVS_INT_STAT = 0x150, /* Central int status */
MVS_INT_MASK = 0x154, /* Central int enable */
MVS_INT_STAT_SRS = 0x158, /* SATA register set status */
MVS_INT_MASK_SRS = 0x15C,
MVS_INT_STAT_SRS_0 = 0x158, /* SATA register set status */
MVS_INT_MASK_SRS_0 = 0x15C,
/* ports 1-3 follow after this */
MVS_P0_INT_STAT = 0x160, /* port0 interrupt status */
MVS_P0_INT_MASK = 0x164, /* port0 interrupt mask */
MVS_P4_INT_STAT = 0x200, /* Port 4 interrupt status */
MVS_P4_INT_MASK = 0x204, /* Port 4 interrupt enable mask */
/* ports 5-7 follow after this */
MVS_P4_INT_STAT = 0x200, /* Port4 interrupt status */
MVS_P4_INT_MASK = 0x204, /* Port4 interrupt enable mask */
/* ports 1-3 follow after this */
MVS_P0_SER_CTLSTAT = 0x180, /* port0 serial control/status */
/* ports 5-7 follow after this */
MVS_P4_SER_CTLSTAT = 0x220, /* port4 serial control/status */
MVS_CMD_ADDR = 0x1B8, /* Command register port (addr) */
......@@ -49,20 +83,23 @@ enum hw_registers {
/* ports 1-3 follow after this */
MVS_P0_CFG_ADDR = 0x1C0, /* port0 phy register address */
MVS_P0_CFG_DATA = 0x1C4, /* port0 phy register data */
MVS_P4_CFG_ADDR = 0x230, /* Port 4 config address */
MVS_P4_CFG_DATA = 0x234, /* Port 4 config data */
/* ports 5-7 follow after this */
MVS_P4_CFG_ADDR = 0x230, /* Port4 config address */
MVS_P4_CFG_DATA = 0x234, /* Port4 config data */
/* ports 1-3 follow after this */
MVS_P0_VSR_ADDR = 0x1E0, /* port0 VSR address */
MVS_P0_VSR_DATA = 0x1E4, /* port0 VSR data */
MVS_P4_VSR_ADDR = 0x250, /* port 4 VSR addr */
MVS_P4_VSR_DATA = 0x254, /* port 4 VSR data */
/* ports 5-7 follow after this */
MVS_P4_VSR_ADDR = 0x250, /* port4 VSR addr */
MVS_P4_VSR_DATA = 0x254, /* port4 VSR data */
};
enum pci_cfg_registers {
PCR_PHY_CTL = 0x40,
PCR_PHY_CTL2 = 0x90,
PCR_DEV_CTRL = 0xE8,
PCR_LINK_STAT = 0xF2,
};
/* SAS/SATA Vendor Specific Port Registers */
......@@ -83,10 +120,32 @@ enum sas_sata_vsp_regs {
VSR_PHY_VS1 = 0x0D, /* Vednor Specific 1 */
};
enum chip_register_bits {
PHY_MIN_SPP_PHYS_LINK_RATE_MASK = (0xF << 8),
PHY_MAX_SPP_PHYS_LINK_RATE_MASK = (0xF << 12),
PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET = (16),
PHY_NEG_SPP_PHYS_LINK_RATE_MASK =
(0xF << PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET),
};
#define MAX_SG_ENTRY 64
struct mvs_prd {
__le64 addr; /* 64-bit buffer address */
__le32 reserved;
__le32 len; /* 16-bit length */
};
#define SPI_CTRL_REG 0xc0
#define SPI_CTRL_VENDOR_ENABLE (1U<<29)
#define SPI_CTRL_SPIRDY (1U<<22)
#define SPI_CTRL_SPISTART (1U<<20)
#define SPI_CMD_REG 0xc4
#define SPI_DATA_REG 0xc8
#define SPI_CTRL_REG_64XX 0x10
#define SPI_CMD_REG_64XX 0x14
#define SPI_DATA_REG_64XX 0x18
#endif
This diff is collapsed.
/*
* Marvell 88SE94xx hardware specific head file
*
* Copyright 2007 Red Hat, Inc.
* Copyright 2008 Marvell. <kewei@marvell.com>
*
* This file is licensed under GPLv2.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of the
* License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
* USA
*/
#ifndef _MVS94XX_REG_H_
#define _MVS94XX_REG_H_
#include <linux/types.h>
#define MAX_LINK_RATE SAS_LINK_RATE_6_0_GBPS
enum hw_registers {
MVS_GBL_CTL = 0x04, /* global control */
MVS_GBL_INT_STAT = 0x00, /* global irq status */
MVS_GBL_PI = 0x0C, /* ports implemented bitmask */
MVS_PHY_CTL = 0x40, /* SOC PHY Control */
MVS_PORTS_IMP = 0x9C, /* SOC Port Implemented */
MVS_GBL_PORT_TYPE = 0xa0, /* port type */
MVS_CTL = 0x100, /* SAS/SATA port configuration */
MVS_PCS = 0x104, /* SAS/SATA port control/status */
MVS_CMD_LIST_LO = 0x108, /* cmd list addr */
MVS_CMD_LIST_HI = 0x10C,
MVS_RX_FIS_LO = 0x110, /* RX FIS list addr */
MVS_RX_FIS_HI = 0x114,
MVS_STP_REG_SET_0 = 0x118, /* STP/SATA Register Set Enable */
MVS_STP_REG_SET_1 = 0x11C,
MVS_TX_CFG = 0x120, /* TX configuration */
MVS_TX_LO = 0x124, /* TX (delivery) ring addr */
MVS_TX_HI = 0x128,
MVS_TX_PROD_IDX = 0x12C, /* TX producer pointer */
MVS_TX_CONS_IDX = 0x130, /* TX consumer pointer (RO) */
MVS_RX_CFG = 0x134, /* RX configuration */
MVS_RX_LO = 0x138, /* RX (completion) ring addr */
MVS_RX_HI = 0x13C,
MVS_RX_CONS_IDX = 0x140, /* RX consumer pointer (RO) */
MVS_INT_COAL = 0x148, /* Int coalescing config */
MVS_INT_COAL_TMOUT = 0x14C, /* Int coalescing timeout */
MVS_INT_STAT = 0x150, /* Central int status */
MVS_INT_MASK = 0x154, /* Central int enable */
MVS_INT_STAT_SRS_0 = 0x158, /* SATA register set status */
MVS_INT_MASK_SRS_0 = 0x15C,
MVS_INT_STAT_SRS_1 = 0x160,
MVS_INT_MASK_SRS_1 = 0x164,
MVS_NON_NCQ_ERR_0 = 0x168, /* SRS Non-specific NCQ Error */
MVS_NON_NCQ_ERR_1 = 0x16C,
MVS_CMD_ADDR = 0x170, /* Command register port (addr) */
MVS_CMD_DATA = 0x174, /* Command register port (data) */
MVS_MEM_PARITY_ERR = 0x178, /* Memory parity error */
/* ports 1-3 follow after this */
MVS_P0_INT_STAT = 0x180, /* port0 interrupt status */
MVS_P0_INT_MASK = 0x184, /* port0 interrupt mask */
/* ports 5-7 follow after this */
MVS_P4_INT_STAT = 0x1A0, /* Port4 interrupt status */
MVS_P4_INT_MASK = 0x1A4, /* Port4 interrupt enable mask */
/* ports 1-3 follow after this */
MVS_P0_SER_CTLSTAT = 0x1D0, /* port0 serial control/status */
/* ports 5-7 follow after this */
MVS_P4_SER_CTLSTAT = 0x1E0, /* port4 serial control/status */
/* ports 1-3 follow after this */
MVS_P0_CFG_ADDR = 0x200, /* port0 phy register address */
MVS_P0_CFG_DATA = 0x204, /* port0 phy register data */
/* ports 5-7 follow after this */
MVS_P4_CFG_ADDR = 0x220, /* Port4 config address */
MVS_P4_CFG_DATA = 0x224, /* Port4 config data */
/* phys 1-3 follow after this */
MVS_P0_VSR_ADDR = 0x250, /* phy0 VSR address */
MVS_P0_VSR_DATA = 0x254, /* phy0 VSR data */
/* phys 1-3 follow after this */
/* multiplexing */
MVS_P4_VSR_ADDR = 0x250, /* phy4 VSR address */
MVS_P4_VSR_DATA = 0x254, /* phy4 VSR data */
MVS_PA_VSR_ADDR = 0x290, /* All port VSR addr */
MVS_PA_VSR_PORT = 0x294, /* All port VSR data */
};
enum pci_cfg_registers {
PCR_PHY_CTL = 0x40,
PCR_PHY_CTL2 = 0x90,
PCR_DEV_CTRL = 0x78,
PCR_LINK_STAT = 0x82,
};
/* SAS/SATA Vendor Specific Port Registers */
enum sas_sata_vsp_regs {
VSR_PHY_STAT = 0x00 * 4, /* Phy Status */
VSR_PHY_MODE1 = 0x01 * 4, /* phy tx */
VSR_PHY_MODE2 = 0x02 * 4, /* tx scc */
VSR_PHY_MODE3 = 0x03 * 4, /* pll */
VSR_PHY_MODE4 = 0x04 * 4, /* VCO */
VSR_PHY_MODE5 = 0x05 * 4, /* Rx */
VSR_PHY_MODE6 = 0x06 * 4, /* CDR */
VSR_PHY_MODE7 = 0x07 * 4, /* Impedance */
VSR_PHY_MODE8 = 0x08 * 4, /* Voltage */
VSR_PHY_MODE9 = 0x09 * 4, /* Test */
VSR_PHY_MODE10 = 0x0A * 4, /* Power */
VSR_PHY_MODE11 = 0x0B * 4, /* Phy Mode */
VSR_PHY_VS0 = 0x0C * 4, /* Vednor Specific 0 */
VSR_PHY_VS1 = 0x0D * 4, /* Vednor Specific 1 */
};
enum chip_register_bits {
PHY_MIN_SPP_PHYS_LINK_RATE_MASK = (0x7 << 8),
PHY_MAX_SPP_PHYS_LINK_RATE_MASK = (0x7 << 8),
PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET = (12),
PHY_NEG_SPP_PHYS_LINK_RATE_MASK =
(0x3 << PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET),
};
enum pci_interrupt_cause {
/* MAIN_IRQ_CAUSE (R10200) Bits*/
IRQ_COM_IN_I2O_IOP0 = (1 << 0),
IRQ_COM_IN_I2O_IOP1 = (1 << 1),
IRQ_COM_IN_I2O_IOP2 = (1 << 2),
IRQ_COM_IN_I2O_IOP3 = (1 << 3),
IRQ_COM_OUT_I2O_HOS0 = (1 << 4),
IRQ_COM_OUT_I2O_HOS1 = (1 << 5),
IRQ_COM_OUT_I2O_HOS2 = (1 << 6),
IRQ_COM_OUT_I2O_HOS3 = (1 << 7),
IRQ_PCIF_TO_CPU_DRBL0 = (1 << 8),
IRQ_PCIF_TO_CPU_DRBL1 = (1 << 9),
IRQ_PCIF_TO_CPU_DRBL2 = (1 << 10),
IRQ_PCIF_TO_CPU_DRBL3 = (1 << 11),
IRQ_PCIF_DRBL0 = (1 << 12),
IRQ_PCIF_DRBL1 = (1 << 13),
IRQ_PCIF_DRBL2 = (1 << 14),
IRQ_PCIF_DRBL3 = (1 << 15),
IRQ_XOR_A = (1 << 16),
IRQ_XOR_B = (1 << 17),
IRQ_SAS_A = (1 << 18),
IRQ_SAS_B = (1 << 19),
IRQ_CPU_CNTRL = (1 << 20),
IRQ_GPIO = (1 << 21),
IRQ_UART = (1 << 22),
IRQ_SPI = (1 << 23),
IRQ_I2C = (1 << 24),
IRQ_SGPIO = (1 << 25),
IRQ_COM_ERR = (1 << 29),
IRQ_I2O_ERR = (1 << 30),
IRQ_PCIE_ERR = (1 << 31),
};
#define MAX_SG_ENTRY 255
struct mvs_prd_imt {
__le32 len:22;
u8 _r_a:2;
u8 misc_ctl:4;
u8 inter_sel:4;
};
struct mvs_prd {
/* 64-bit buffer address */
__le64 addr;
/* 22-bit length */
struct mvs_prd_imt im_len;
} __attribute__ ((packed));
#define SPI_CTRL_REG_94XX 0xc800
#define SPI_ADDR_REG_94XX 0xc804
#define SPI_WR_DATA_REG_94XX 0xc808
#define SPI_RD_DATA_REG_94XX 0xc80c
#define SPI_CTRL_READ_94XX (1U << 2)
#define SPI_ADDR_VLD_94XX (1U << 1)
#define SPI_CTRL_SpiStart_94XX (1U << 0)
#define mv_ffc(x) ffz(x)
static inline int
mv_ffc64(u64 v)
{
int i;
i = mv_ffc((u32)v);
if (i >= 0)
return i;
i = mv_ffc((u32)(v>>32));
if (i != 0)
return 32 + i;
return -1;
}
#define r_reg_set_enable(i) \
(((i) > 31) ? mr32(MVS_STP_REG_SET_1) : \
mr32(MVS_STP_REG_SET_0))
#define w_reg_set_enable(i, tmp) \
(((i) > 31) ? mw32(MVS_STP_REG_SET_1, tmp) : \
mw32(MVS_STP_REG_SET_0, tmp))
extern const struct mvs_dispatch mvs_94xx_dispatch;
#endif
/*
* Marvell 88SE64xx/88SE94xx register IO interface
*
* Copyright 2007 Red Hat, Inc.
* Copyright 2008 Marvell. <kewei@marvell.com>
*
* This file is licensed under GPLv2.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of the
* License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
* USA
*/
#ifndef _MV_CHIPS_H_
#define _MV_CHIPS_H_
#define mr32(reg) readl(regs + MVS_##reg)
#define mw32(reg,val) writel((val), regs + MVS_##reg)
#define mw32_f(reg,val) do { \
writel((val), regs + MVS_##reg); \
readl(regs + MVS_##reg); \
} while (0)
#define mr32(reg) readl(regs + reg)
#define mw32(reg, val) writel((val), regs + reg)
#define mw32_f(reg, val) do { \
mw32(reg, val); \
mr32(reg); \
} while (0)
static inline u32 mvs_cr32(void __iomem *regs, u32 addr)
#define iow32(reg, val) outl(val, (unsigned long)(regs + reg))
#define ior32(reg) inl((unsigned long)(regs + reg))
#define iow16(reg, val) outw((unsigned long)(val, regs + reg))
#define ior16(reg) inw((unsigned long)(regs + reg))
#define iow8(reg, val) outb((unsigned long)(val, regs + reg))
#define ior8(reg) inb((unsigned long)(regs + reg))
static inline u32 mvs_cr32(struct mvs_info *mvi, u32 addr)
{
mw32(CMD_ADDR, addr);
return mr32(CMD_DATA);
void __iomem *regs = mvi->regs;
mw32(MVS_CMD_ADDR, addr);
return mr32(MVS_CMD_DATA);
}
static inline void mvs_cw32(void __iomem *regs, u32 addr, u32 val)
static inline void mvs_cw32(struct mvs_info *mvi, u32 addr, u32 val)
{
mw32(CMD_ADDR, addr);
mw32(CMD_DATA, val);
void __iomem *regs = mvi->regs;
mw32(MVS_CMD_ADDR, addr);
mw32(MVS_CMD_DATA, val);
}
static inline u32 mvs_read_phy_ctl(struct mvs_info *mvi, u32 port)
{
void __iomem *regs = mvi->regs;
return (port < 4)?mr32(P0_SER_CTLSTAT + port * 4):
mr32(P4_SER_CTLSTAT + (port - 4) * 4);
return (port < 4) ? mr32(MVS_P0_SER_CTLSTAT + port * 4) :
mr32(MVS_P4_SER_CTLSTAT + (port - 4) * 4);
}
static inline void mvs_write_phy_ctl(struct mvs_info *mvi, u32 port, u32 val)
{
void __iomem *regs = mvi->regs;
if (port < 4)
mw32(P0_SER_CTLSTAT + port * 4, val);
mw32(MVS_P0_SER_CTLSTAT + port * 4, val);
else
mw32(P4_SER_CTLSTAT + (port - 4) * 4, val);
mw32(MVS_P4_SER_CTLSTAT + (port - 4) * 4, val);
}
static inline u32 mvs_read_port(struct mvs_info *mvi, u32 off, u32 off2, u32 port)
static inline u32 mvs_read_port(struct mvs_info *mvi, u32 off,
u32 off2, u32 port)
{
void __iomem *regs = mvi->regs + off;
void __iomem *regs2 = mvi->regs + off2;
return (port < 4)?readl(regs + port * 8):
return (port < 4) ? readl(regs + port * 8) :
readl(regs2 + (port - 4) * 8);
}
......@@ -61,16 +96,19 @@ static inline u32 mvs_read_port_cfg_data(struct mvs_info *mvi, u32 port)
MVS_P4_CFG_DATA, port);
}
static inline void mvs_write_port_cfg_data(struct mvs_info *mvi, u32 port, u32 val)
static inline void mvs_write_port_cfg_data(struct mvs_info *mvi,
u32 port, u32 val)
{
mvs_write_port(mvi, MVS_P0_CFG_DATA,
MVS_P4_CFG_DATA, port, val);
}
static inline void mvs_write_port_cfg_addr(struct mvs_info *mvi, u32 port, u32 addr)
static inline void mvs_write_port_cfg_addr(struct mvs_info *mvi,
u32 port, u32 addr)
{
mvs_write_port(mvi, MVS_P0_CFG_ADDR,
MVS_P4_CFG_ADDR, port, addr);
mdelay(10);
}
static inline u32 mvs_read_port_vsr_data(struct mvs_info *mvi, u32 port)
......@@ -79,16 +117,19 @@ static inline u32 mvs_read_port_vsr_data(struct mvs_info *mvi, u32 port)
MVS_P4_VSR_DATA, port);
}
static inline void mvs_write_port_vsr_data(struct mvs_info *mvi, u32 port, u32 val)
static inline void mvs_write_port_vsr_data(struct mvs_info *mvi,
u32 port, u32 val)
{
mvs_write_port(mvi, MVS_P0_VSR_DATA,
MVS_P4_VSR_DATA, port, val);
}
static inline void mvs_write_port_vsr_addr(struct mvs_info *mvi, u32 port, u32 addr)
static inline void mvs_write_port_vsr_addr(struct mvs_info *mvi,
u32 port, u32 addr)
{
mvs_write_port(mvi, MVS_P0_VSR_ADDR,
MVS_P4_VSR_ADDR, port, addr);
mdelay(10);
}
static inline u32 mvs_read_port_irq_stat(struct mvs_info *mvi, u32 port)
......@@ -97,7 +138,8 @@ static inline u32 mvs_read_port_irq_stat(struct mvs_info *mvi, u32 port)
MVS_P4_INT_STAT, port);
}
static inline void mvs_write_port_irq_stat(struct mvs_info *mvi, u32 port, u32 val)
static inline void mvs_write_port_irq_stat(struct mvs_info *mvi,
u32 port, u32 val)
{
mvs_write_port(mvi, MVS_P0_INT_STAT,
MVS_P4_INT_STAT, port, val);
......@@ -107,12 +149,132 @@ static inline u32 mvs_read_port_irq_mask(struct mvs_info *mvi, u32 port)
{
return mvs_read_port(mvi, MVS_P0_INT_MASK,
MVS_P4_INT_MASK, port);
}
static inline void mvs_write_port_irq_mask(struct mvs_info *mvi, u32 port, u32 val)
static inline void mvs_write_port_irq_mask(struct mvs_info *mvi,
u32 port, u32 val)
{
mvs_write_port(mvi, MVS_P0_INT_MASK,
MVS_P4_INT_MASK, port, val);
}
#endif
static inline void __devinit mvs_phy_hacks(struct mvs_info *mvi)
{
u32 tmp;
/* workaround for SATA R-ERR, to ignore phy glitch */
tmp = mvs_cr32(mvi, CMD_PHY_TIMER);
tmp &= ~(1 << 9);
tmp |= (1 << 10);
mvs_cw32(mvi, CMD_PHY_TIMER, tmp);
/* enable retry 127 times */
mvs_cw32(mvi, CMD_SAS_CTL1, 0x7f7f);
/* extend open frame timeout to max */
tmp = mvs_cr32(mvi, CMD_SAS_CTL0);
tmp &= ~0xffff;
tmp |= 0x3fff;
mvs_cw32(mvi, CMD_SAS_CTL0, tmp);
/* workaround for WDTIMEOUT , set to 550 ms */
mvs_cw32(mvi, CMD_WD_TIMER, 0x7a0000);
/* not to halt for different port op during wideport link change */
mvs_cw32(mvi, CMD_APP_ERR_CONFIG, 0xffefbf7d);
/* workaround for Seagate disk not-found OOB sequence, recv
* COMINIT before sending out COMWAKE */
tmp = mvs_cr32(mvi, CMD_PHY_MODE_21);
tmp &= 0x0000ffff;
tmp |= 0x00fa0000;
mvs_cw32(mvi, CMD_PHY_MODE_21, tmp);
tmp = mvs_cr32(mvi, CMD_PHY_TIMER);
tmp &= 0x1fffffff;
tmp |= (2U << 29); /* 8 ms retry */
mvs_cw32(mvi, CMD_PHY_TIMER, tmp);
}
static inline void mvs_int_sata(struct mvs_info *mvi)
{
u32 tmp;
void __iomem *regs = mvi->regs;
tmp = mr32(MVS_INT_STAT_SRS_0);
if (tmp)
mw32(MVS_INT_STAT_SRS_0, tmp);
MVS_CHIP_DISP->clear_active_cmds(mvi);
}
static inline void mvs_int_full(struct mvs_info *mvi)
{
void __iomem *regs = mvi->regs;
u32 tmp, stat;
int i;
stat = mr32(MVS_INT_STAT);
mvs_int_rx(mvi, false);
for (i = 0; i < mvi->chip->n_phy; i++) {
tmp = (stat >> i) & (CINT_PORT | CINT_PORT_STOPPED);
if (tmp)
mvs_int_port(mvi, i, tmp);
}
if (stat & CINT_SRS)
mvs_int_sata(mvi);
mw32(MVS_INT_STAT, stat);
}
static inline void mvs_start_delivery(struct mvs_info *mvi, u32 tx)
{
void __iomem *regs = mvi->regs;
mw32(MVS_TX_PROD_IDX, tx);
}
static inline u32 mvs_rx_update(struct mvs_info *mvi)
{
void __iomem *regs = mvi->regs;
return mr32(MVS_RX_CONS_IDX);
}
static inline u32 mvs_get_prd_size(void)
{
return sizeof(struct mvs_prd);
}
static inline u32 mvs_get_prd_count(void)
{
return MAX_SG_ENTRY;
}
static inline void mvs_show_pcie_usage(struct mvs_info *mvi)
{
u16 link_stat, link_spd;
const char *spd[] = {
"UnKnown",
"2.5",
"5.0",
};
if (mvi->flags & MVF_FLAG_SOC || mvi->id > 0)
return;
pci_read_config_word(mvi->pdev, PCR_LINK_STAT, &link_stat);
link_spd = (link_stat & PLS_LINK_SPD) >> PLS_LINK_SPD_OFFS;
if (link_spd >= 3)
link_spd = 0;
dev_printk(KERN_INFO, mvi->dev,
"mvsas: PCI-E x%u, Bandwidth Usage: %s Gbps\n",
(link_stat & PLS_NEG_LINK_WD) >> PLS_NEG_LINK_WD_OFFS,
spd[link_spd]);
}
static inline u32 mvs_hw_max_link_rate(void)
{
return MAX_LINK_RATE;
}
#endif /* _MV_CHIPS_H_ */
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment