OMAP2: PM debug: remove register dumping

Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>

arch/arm/mach-omap2/pm-debug.c

@@ -38,129 +38,10 @@
 #include "prm2xxx_3xxx.h"
 #include "pm.h"
 
-int omap2_pm_debug;
 u32 enable_off_mode;
 u32 wakeup_timer_seconds;
 u32 wakeup_timer_milliseconds;
 
-#define DUMP_PRM_MOD_REG(mod, reg)    \
-	regs[reg_count].name = #mod "." #reg; \
-	regs[reg_count++].val = omap2_prm_read_mod_reg(mod, reg)
-#define DUMP_CM_MOD_REG(mod, reg)     \
-	regs[reg_count].name = #mod "." #reg; \
-	regs[reg_count++].val = omap2_cm_read_mod_reg(mod, reg)
-#define DUMP_PRM_REG(reg) \
-	regs[reg_count].name = #reg; \
-	regs[reg_count++].val = __raw_readl(reg)
-#define DUMP_CM_REG(reg) \
-	regs[reg_count].name = #reg; \
-	regs[reg_count++].val = __raw_readl(reg)
-#define DUMP_INTC_REG(reg, off) \
-	regs[reg_count].name = #reg; \
-	regs[reg_count++].val = \
-			 __raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off)))
-
-void omap2_pm_dump(int mode, int resume, unsigned int us)
-{
-	struct reg {
-		const char *name;
-		u32 val;
-	} regs[32];
-	int reg_count = 0, i;
-	const char *s1 = NULL, *s2 = NULL;
-
-	if (!resume) {
-#if 0
-		/* MPU */
-		DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET);
-		DUMP_CM_MOD_REG(MPU_MOD, OMAP2_CM_CLKSTCTRL);
-		DUMP_PRM_MOD_REG(MPU_MOD, OMAP2_PM_PWSTCTRL);
-		DUMP_PRM_MOD_REG(MPU_MOD, OMAP2_PM_PWSTST);
-		DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP);
-#endif
-#if 0
-		/* INTC */
-		DUMP_INTC_REG(INTC_MIR0, 0x0084);
-		DUMP_INTC_REG(INTC_MIR1, 0x00a4);
-		DUMP_INTC_REG(INTC_MIR2, 0x00c4);
-#endif
-#if 0
-		DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1);
-		if (cpu_is_omap24xx()) {
-			DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2);
-			DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
-					OMAP2_PRCM_CLKEMUL_CTRL_OFFSET);
-			DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
-					OMAP2_PRCM_CLKSRC_CTRL_OFFSET);
-		}
-		DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN);
-		DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1);
-		DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2);
-		DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN);
-		DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN);
-		DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE);
-		DUMP_PRM_MOD_REG(CORE_MOD, OMAP2_PM_PWSTST);
-#endif
-#if 0
-		/* DSP */
-		if (cpu_is_omap24xx()) {
-			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN);
-			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN);
-			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST);
-			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE);
-			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL);
-			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_CM_CLKSTCTRL);
-			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_RM_RSTCTRL);
-			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_RM_RSTST);
-			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_PM_PWSTCTRL);
-			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_PM_PWSTST);
-		}
-#endif
-	} else {
-		DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1);
-		if (cpu_is_omap24xx())
-			DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2);
-		DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST);
-		DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
-#if 1
-		DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098);
-		DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8);
-		DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8);
-#endif
-	}
-
-	switch (mode) {
-	case 0:
-		s1 = "full";
-		s2 = "retention";
-		break;
-	case 1:
-		s1 = "MPU";
-		s2 = "retention";
-		break;
-	case 2:
-		s1 = "MPU";
-		s2 = "idle";
-		break;
-	}
-
-	if (!resume)
-#ifdef CONFIG_NO_HZ
-		printk(KERN_INFO
-		       "--- Going to %s %s (next timer after %u ms)\n", s1, s2,
-		       jiffies_to_msecs(get_next_timer_interrupt(jiffies) -
-					jiffies));
-#else
-		printk(KERN_INFO "--- Going to %s %s\n", s1, s2);
-#endif
-	else
-		printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n",
-			us / 1000, us % 1000);
-
-	for (i = 0; i < reg_count; i++)
-		printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
-}
-
 void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
 {
 	u32 tick_rate, cycles;

arch/arm/mach-omap2/pm.h

@@ -65,14 +65,10 @@ extern u32 wakeup_timer_milliseconds;
 extern struct omap_dm_timer *gptimer_wakeup;
 
 #ifdef CONFIG_PM_DEBUG
-extern void omap2_pm_dump(int mode, int resume, unsigned int us);
 extern void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds);
-extern int omap2_pm_debug;
 extern u32 enable_off_mode;
 #else
-#define omap2_pm_dump(mode, resume, us)		do {} while (0);
 #define omap2_pm_wakeup_on_timer(seconds, milliseconds)	do {} while (0);
-#define omap2_pm_debug				0
 #define enable_off_mode 0
 #endif
 

arch/arm/mach-omap2/pm24xx.c

@@ -53,6 +53,8 @@
 #include "powerdomain.h"
 #include "clockdomain.h"
 
+static int omap2_pm_debug;
+
 #ifdef CONFIG_SUSPEND
 static suspend_state_t suspend_state = PM_SUSPEND_ON;
 static inline bool is_suspending(void)
@@ -123,7 +125,6 @@ static void omap2_enter_full_retention(void)
 	omap2_gpio_prepare_for_idle(0);
 
 	if (omap2_pm_debug) {
-		omap2_pm_dump(0, 0, 0);
 		getnstimeofday(&ts_preidle);
 	}
 
@@ -160,7 +161,6 @@ static void omap2_enter_full_retention(void)
 		getnstimeofday(&ts_postidle);
 		ts_idle = timespec_sub(ts_postidle, ts_preidle);
 		tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
-		omap2_pm_dump(0, 1, tmp);
 	}
 	omap2_gpio_resume_after_idle();
 
@@ -247,7 +247,6 @@ static void omap2_enter_mpu_retention(void)
 	}
 
 	if (omap2_pm_debug) {
-		omap2_pm_dump(only_idle ? 2 : 1, 0, 0);
 		getnstimeofday(&ts_preidle);
 	}
 
@@ -259,7 +258,6 @@ static void omap2_enter_mpu_retention(void)
 		getnstimeofday(&ts_postidle);
 		ts_idle = timespec_sub(ts_postidle, ts_preidle);
 		tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
-		omap2_pm_dump(only_idle ? 2 : 1, 1, tmp);
 	}
 }