Commit 213d6138 authored by David S. Miller's avatar David S. Miller

Merge branch 'am335x'

Markus Pargmann says:

====================
net: cpsw: Support for am335x chip MACIDs

This series adds support to the cpsw driver to read the MACIDs of the am335x
chip and use them as fallback. These addresses are only used if there are no
mac addresses in the devicetree, for example set by a bootloader.
====================
Acked-by: default avatarMugunthan V N <mugunthanvnm@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 5f0c5f73 fa5f4adf
......@@ -24,15 +24,17 @@ Optional properties:
- ti,hwmods : Must be "cpgmac0"
- no_bd_ram : Must be 0 or 1
- dual_emac : Specifies Switch to act as Dual EMAC
- syscon : Phandle to the system control device node, which is
the control module device of the am33x
Slave Properties:
Required properties:
- phy_id : Specifies slave phy id
- phy-mode : See ethernet.txt file in the same directory
- mac-address : See ethernet.txt file in the same directory
Optional properties:
- dual_emac_res_vlan : Specifies VID to be used to segregate the ports
- mac-address : See ethernet.txt file in the same directory
Note: "ti,hwmods" field is used to fetch the base address and irq
resources from TI, omap hwmod data base during device registration.
......@@ -57,6 +59,7 @@ Examples:
active_slave = <0>;
cpts_clock_mult = <0x80000000>;
cpts_clock_shift = <29>;
syscon = <&cm>;
cpsw_emac0: slave@0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rgmii-txid";
......@@ -85,6 +88,7 @@ Examples:
active_slave = <0>;
cpts_clock_mult = <0x80000000>;
cpts_clock_shift = <29>;
syscon = <&cm>;
cpsw_emac0: slave@0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rgmii-txid";
......
......@@ -132,6 +132,11 @@ scrm_clockdomains: clockdomains {
};
};
cm: syscon@44e10000 {
compatible = "ti,am33xx-controlmodule", "syscon";
reg = <0x44e10000 0x800>;
};
intc: interrupt-controller@48200000 {
compatible = "ti,omap2-intc";
interrupt-controller;
......@@ -696,6 +701,7 @@ mac: ethernet@4a100000 {
*/
interrupts = <40 41 42 43>;
ranges;
syscon = <&cm>;
status = "disabled";
davinci_mdio: mdio@4a101000 {
......
......@@ -62,6 +62,8 @@ config TI_CPSW
select TI_DAVINCI_CPDMA
select TI_DAVINCI_MDIO
select TI_CPSW_PHY_SEL
select MFD_SYSCON
select REGMAP
---help---
This driver supports TI's CPSW Ethernet Switch.
......
......@@ -33,6 +33,8 @@
#include <linux/of_net.h>
#include <linux/of_device.h>
#include <linux/if_vlan.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include <linux/pinctrl/consumer.h>
......@@ -1876,6 +1878,36 @@ static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_priv *priv,
slave->port_vlan = data->dual_emac_res_vlan;
}
#define AM33XX_CTRL_MAC_LO_REG(id) (0x630 + 0x8 * id)
#define AM33XX_CTRL_MAC_HI_REG(id) (0x630 + 0x8 * id + 0x4)
static int cpsw_am33xx_cm_get_macid(struct device *dev, int slave,
u8 *mac_addr)
{
u32 macid_lo;
u32 macid_hi;
struct regmap *syscon;
syscon = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon");
if (IS_ERR(syscon)) {
if (PTR_ERR(syscon) == -ENODEV)
return 0;
return PTR_ERR(syscon);
}
regmap_read(syscon, AM33XX_CTRL_MAC_LO_REG(slave), &macid_lo);
regmap_read(syscon, AM33XX_CTRL_MAC_HI_REG(slave), &macid_hi);
mac_addr[5] = (macid_lo >> 8) & 0xff;
mac_addr[4] = macid_lo & 0xff;
mac_addr[3] = (macid_hi >> 24) & 0xff;
mac_addr[2] = (macid_hi >> 16) & 0xff;
mac_addr[1] = (macid_hi >> 8) & 0xff;
mac_addr[0] = macid_hi & 0xff;
return 0;
}
static int cpsw_probe_dt(struct cpsw_platform_data *data,
struct platform_device *pdev)
{
......@@ -1981,15 +2013,23 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
mdio = of_find_device_by_node(mdio_node);
of_node_put(mdio_node);
if (!mdio) {
pr_err("Missing mdio platform device\n");
dev_err(&pdev->dev, "Missing mdio platform device\n");
return -EINVAL;
}
snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
PHY_ID_FMT, mdio->name, phyid);
mac_addr = of_get_mac_address(slave_node);
if (mac_addr)
if (mac_addr) {
memcpy(slave_data->mac_addr, mac_addr, ETH_ALEN);
} else {
if (of_machine_is_compatible("ti,am33xx")) {
ret = cpsw_am33xx_cm_get_macid(&pdev->dev, i,
slave_data->mac_addr);
if (ret)
return ret;
}
}
slave_data->phy_if = of_get_phy_mode(slave_node);
if (slave_data->phy_if < 0) {
......@@ -2123,6 +2163,7 @@ static int cpsw_probe(struct platform_device *pdev)
priv->irq_enabled = true;
if (!priv->cpts) {
dev_err(&pdev->dev, "error allocating cpts\n");
ret = -ENOMEM;
goto clean_ndev_ret;
}
......
......@@ -15,6 +15,7 @@
#define __CPSW_H__
#include <linux/if_ether.h>
#include <linux/phy.h>
struct cpsw_slave_data {
char phy_id[MII_BUS_ID_SIZE];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment