Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - a new driver to ChipOne icn8505 based touchscreens

 - on certain systems with Elan touch controllers they will be switched
   away form PS/2 emulation and over to native SMbus mode

 - assorted driver fixups and improvements

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits)
  Input: elan_i2c - add ELAN0612 (Lenovo v330 14IKB) ACPI ID
  Input: goodix - add new ACPI id for GPD Win 2 touch screen
  Input: xpad - add GPD Win 2 Controller USB IDs
  Input: ti_am335x_tsc - prevent system suspend when TSC is in use
  Input: ti_am335x_tsc - ack pending IRQs at probe and before suspend
  Input: cros_ec_keyb - mark cros_ec_keyb driver as wake enabled device.
  Input: mk712 - update documentation web link
  Input: atmel_mxt_ts - fix reset-gpio for level based irqs
  Input: atmel_mxt_ts - require device properties present when probing
  Input: psmouse-smbus - allow to control psmouse_deactivate
  Input: elantech - detect new ICs and setup Host Notify for them
  Input: elantech - add support for SMBus devices
  Input: elantech - query the resolution in query_info
  Input: elantech - split device info into a separate structure
  Input: elan_i2c - add trackstick report
  Input: usbtouchscreen - add sysfs attribute for 3M MTouch firmware rev
  Input: ati_remote2 - fix typo 'can by' to 'can be'
  Input: replace hard coded string with __func__ in pr_err()
  Input: add support for ChipOne icn8505 based touchscreens
  Input: gamecon - avoid using __set_bit() for capabilities
  ...

Documentation/devicetree/bindings/input/elan_i2c.txt

@@ -14,6 +14,7 @@ Optional properties:
 - pinctrl-0: a phandle pointing to the pin settings for the device (see
   pinctrl binding [1]).
 - vcc-supply: a phandle for the regulator supplying 3.3V power.
+- elan,trackpoint: touchpad can support a trackpoint (boolean)
 
 [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 [1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt

MAINTAINERS

@@ -3431,6 +3431,12 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
 F:	drivers/input/touchscreen/chipone_icn8318.c
 
+CHIPONE ICN8505 I2C TOUCHSCREEN DRIVER
+M:	Hans de Goede <hdegoede@redhat.com>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	drivers/input/touchscreen/chipone_icn8505.c
+
 CHROME HARDWARE PLATFORM SUPPORT
 M:	Benson Leung <bleung@chromium.org>
 M:	Olof Johansson <olof@lixom.net>

drivers/input/input.c

@@ -1943,8 +1943,7 @@ void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int
 		break;
 
 	default:
-		pr_err("input_set_capability: unknown type %u (code %u)\n",
-		       type, code);
+		pr_err("%s: unknown type %u (code %u)\n", __func__, type, code);
 		dump_stack();
 		return;
 	}

drivers/input/joystick/as5011.c

@@ -269,9 +269,7 @@ static int as5011_probe(struct i2c_client *client,
 	input_dev->id.bustype = BUS_I2C;
 	input_dev->dev.parent = &client->dev;
 
-	__set_bit(EV_KEY, input_dev->evbit);
-	__set_bit(EV_ABS, input_dev->evbit);
-	__set_bit(BTN_JOYSTICK, input_dev->keybit);
+	input_set_capability(input_dev, EV_KEY, BTN_JOYSTICK);
 
 	input_set_abs_params(input_dev, ABS_X,
 		AS5011_MIN_AXIS, AS5011_MAX_AXIS, AS5011_FUZZ, AS5011_FLAT);

drivers/input/joystick/gamecon.c

@@ -862,7 +862,7 @@ static int gc_setup_pad(struct gc *gc, int idx, int pad_type)
 
 	case GC_N64:
 		for (i = 0; i < 10; i++)
-			__set_bit(gc_n64_btn[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY, gc_n64_btn[i]);
 
 		for (i = 0; i < 2; i++) {
 			input_set_abs_params(input_dev, ABS_X + i, -127, 126, 0, 2);
@@ -879,26 +879,27 @@ static int gc_setup_pad(struct gc *gc, int idx, int pad_type)
 		break;
 
 	case GC_SNESMOUSE:
-		__set_bit(BTN_LEFT, input_dev->keybit);
-		__set_bit(BTN_RIGHT, input_dev->keybit);
-		__set_bit(REL_X, input_dev->relbit);
-		__set_bit(REL_Y, input_dev->relbit);
+		input_set_capability(input_dev, EV_KEY, BTN_LEFT);
+		input_set_capability(input_dev, EV_KEY, BTN_RIGHT);
+		input_set_capability(input_dev, EV_REL, REL_X);
+		input_set_capability(input_dev, EV_REL, REL_Y);
 		break;
 
 	case GC_SNES:
 		for (i = 4; i < 8; i++)
-			__set_bit(gc_snes_btn[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY, gc_snes_btn[i]);
 		/* fall through */
 	case GC_NES:
 		for (i = 0; i < 4; i++)
-			__set_bit(gc_snes_btn[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY, gc_snes_btn[i]);
 		break;
 
 	case GC_MULTI2:
-		__set_bit(BTN_THUMB, input_dev->keybit);
+		input_set_capability(input_dev, EV_KEY, BTN_THUMB);
 		/* fall through */
 	case GC_MULTI:
-		__set_bit(BTN_TRIGGER, input_dev->keybit);
+		input_set_capability(input_dev, EV_KEY, BTN_TRIGGER);
+		/* fall through */
 		break;
 
 	case GC_PSX:
@@ -906,15 +907,17 @@ static int gc_setup_pad(struct gc *gc, int idx, int pad_type)
 			input_set_abs_params(input_dev,
 					     gc_psx_abs[i], 4, 252, 0, 2);
 		for (i = 0; i < 12; i++)
-			__set_bit(gc_psx_btn[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY, gc_psx_btn[i]);
+		break;
 
 		break;
 
 	case GC_DDR:
 		for (i = 0; i < 4; i++)
-			__set_bit(gc_psx_ddr_btn[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY,
+					     gc_psx_ddr_btn[i]);
 		for (i = 0; i < 12; i++)
-			__set_bit(gc_psx_btn[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY, gc_psx_btn[i]);
 
 		break;
 	}

drivers/input/joystick/xpad.c

@@ -86,8 +86,10 @@
 
 #define XPAD_PKT_LEN 64
 
-/* xbox d-pads should map to buttons, as is required for DDR pads
-   but we map them to axes when possible to simplify things */
+/*
+ * xbox d-pads should map to buttons, as is required for DDR pads
+ * but we map them to axes when possible to simplify things
+ */
 #define MAP_DPAD_TO_BUTTONS		(1 << 0)
 #define MAP_TRIGGERS_TO_BUTTONS		(1 << 1)
 #define MAP_STICKS_TO_NULL		(1 << 2)
@@ -123,6 +125,7 @@ static const struct xpad_device {
 	u8 mapping;
 	u8 xtype;
 } xpad_device[] = {
+	{ 0x0079, 0x18d4, "GPD Win 2 Controller", 0, XTYPE_XBOX360 },
 	{ 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX },
 	{ 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX },
 	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
@@ -387,15 +390,15 @@ static const signed short xpad_abs_triggers[] = {
  * match against vendor id as well. Wired Xbox 360 devices have protocol 1,
  * wireless controllers have protocol 129.
  */
-#define XPAD_XBOX360_VENDOR_PROTOCOL(vend,pr) \
+#define XPAD_XBOX360_VENDOR_PROTOCOL(vend, pr) \
 	.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
 	.idVendor = (vend), \
 	.bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
 	.bInterfaceSubClass = 93, \
 	.bInterfaceProtocol = (pr)
 #define XPAD_XBOX360_VENDOR(vend) \
-	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \
-	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) }
+	{ XPAD_XBOX360_VENDOR_PROTOCOL((vend), 1) }, \
+	{ XPAD_XBOX360_VENDOR_PROTOCOL((vend), 129) }
 
 /* The Xbox One controller uses subclass 71 and protocol 208. */
 #define XPAD_XBOXONE_VENDOR_PROTOCOL(vend, pr) \
@@ -405,10 +408,11 @@ static const signed short xpad_abs_triggers[] = {
 	.bInterfaceSubClass = 71, \
 	.bInterfaceProtocol = (pr)
 #define XPAD_XBOXONE_VENDOR(vend) \
-	{ XPAD_XBOXONE_VENDOR_PROTOCOL(vend, 208) }
+	{ XPAD_XBOXONE_VENDOR_PROTOCOL((vend), 208) }
 
 static const struct usb_device_id xpad_table[] = {
 	{ USB_INTERFACE_INFO('X', 'B', 0) },	/* X-Box USB-IF not approved class */
+	XPAD_XBOX360_VENDOR(0x0079),		/* GPD Win 2 Controller */
 	XPAD_XBOX360_VENDOR(0x044f),		/* Thrustmaster X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x045e),		/* Microsoft X-Box 360 controllers */
 	XPAD_XBOXONE_VENDOR(0x045e),		/* Microsoft X-Box One controllers */
@@ -1573,7 +1577,6 @@ static void xpad_close(struct input_dev *dev)
 static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
 {
 	struct usb_xpad *xpad = input_get_drvdata(input_dev);
-	set_bit(abs, input_dev->absbit);
 
 	switch (abs) {
 	case ABS_X:
@@ -1593,6 +1596,9 @@ static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
 	case ABS_HAT0Y:	/* the d-pad (only if dpad is mapped to axes */
 		input_set_abs_params(input_dev, abs, -1, 1, 0, 0);
 		break;
+	default:
+		input_set_abs_params(input_dev, abs, 0, 0, 0, 0);
+		break;
 	}
 }
 
@@ -1633,10 +1639,7 @@ static int xpad_init_input(struct usb_xpad *xpad)
 		input_dev->close = xpad_close;
 	}
 
-	__set_bit(EV_KEY, input_dev->evbit);
-
 	if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
-		__set_bit(EV_ABS, input_dev->evbit);
 		/* set up axes */
 		for (i = 0; xpad_abs[i] >= 0; i++)
 			xpad_set_up_abs(input_dev, xpad_abs[i]);
@@ -1644,21 +1647,22 @@ static int xpad_init_input(struct usb_xpad *xpad)
 
 	/* set up standard buttons */
 	for (i = 0; xpad_common_btn[i] >= 0; i++)
-		__set_bit(xpad_common_btn[i], input_dev->keybit);
+		input_set_capability(input_dev, EV_KEY, xpad_common_btn[i]);
 
 	/* set up model-specific ones */
 	if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W ||
 	    xpad->xtype == XTYPE_XBOXONE) {
 		for (i = 0; xpad360_btn[i] >= 0; i++)
-			__set_bit(xpad360_btn[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY, xpad360_btn[i]);
 	} else {
 		for (i = 0; xpad_btn[i] >= 0; i++)
-			__set_bit(xpad_btn[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY, xpad_btn[i]);
 	}
 
 	if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
 		for (i = 0; xpad_btn_pad[i] >= 0; i++)
-			__set_bit(xpad_btn_pad[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY,
+					     xpad_btn_pad[i]);
 	}
 
 	/*
@@ -1675,7 +1679,8 @@ static int xpad_init_input(struct usb_xpad *xpad)
 
 	if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
 		for (i = 0; xpad_btn_triggers[i] >= 0; i++)
-			__set_bit(xpad_btn_triggers[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY,
+					     xpad_btn_triggers[i]);
 	} else {
 		for (i = 0; xpad_abs_triggers[i] >= 0; i++)
 			xpad_set_up_abs(input_dev, xpad_abs_triggers[i]);

drivers/input/keyboard/cros_ec_keyb.c

@@ -244,24 +244,35 @@ static int cros_ec_keyb_work(struct notifier_block *nb,
 
 	switch (ckdev->ec->event_data.event_type) {
 	case EC_MKBP_EVENT_KEY_MATRIX:
-		/*
-		 * If EC is not the wake source, discard key state changes
-		 * during suspend.
-		 */
-		if (queued_during_suspend)
-			return NOTIFY_OK;
+		if (device_may_wakeup(ckdev->dev)) {
+			pm_wakeup_event(ckdev->dev, 0);
+		} else {
+			/*
+			 * If keyboard is not wake enabled, discard key state
+			 * changes during suspend. Switches will be re-checked
+			 * in cros_ec_keyb_resume() to be sure nothing is lost.
+			 */
+			if (queued_during_suspend)
+				return NOTIFY_OK;
+		}
 
 		if (ckdev->ec->event_size != ckdev->cols) {
 			dev_err(ckdev->dev,
 				"Discarded incomplete key matrix event.\n");
 			return NOTIFY_OK;
 		}
+
 		cros_ec_keyb_process(ckdev,
 				     ckdev->ec->event_data.data.key_matrix,
 				     ckdev->ec->event_size);
 		break;
 
 	case EC_MKBP_EVENT_SYSRQ:
+		if (device_may_wakeup(ckdev->dev))
+			pm_wakeup_event(ckdev->dev, 0);
+		else if (queued_during_suspend)
+			return NOTIFY_OK;
+
 		val = get_unaligned_le32(&ckdev->ec->event_data.data.sysrq);
 		dev_dbg(ckdev->dev, "sysrq code from EC: %#x\n", val);
 		handle_sysrq(val);
@@ -269,12 +280,9 @@ static int cros_ec_keyb_work(struct notifier_block *nb,
 
 	case EC_MKBP_EVENT_BUTTON:
 	case EC_MKBP_EVENT_SWITCH:
-		/*
-		 * If EC is not the wake source, discard key state
-		 * changes during suspend. Switches will be re-checked in
-		 * cros_ec_keyb_resume() to be sure nothing is lost.
-		 */
-		if (queued_during_suspend)
+		if (device_may_wakeup(ckdev->dev))
+			pm_wakeup_event(ckdev->dev, 0);
+		else if (queued_during_suspend)
 			return NOTIFY_OK;
 
 		if (ckdev->ec->event_data.event_type == EC_MKBP_EVENT_BUTTON) {
@@ -639,6 +647,7 @@ static int cros_ec_keyb_probe(struct platform_device *pdev)
 		return err;
 	}
 
+	device_init_wakeup(ckdev->dev, true);
 	return 0;
 }
 

drivers/input/misc/ati_remote2.c

@@ -22,7 +22,7 @@ MODULE_LICENSE("GPL");
 /*
  * ATI Remote Wonder II Channel Configuration
  *
- * The remote control can by assigned one of sixteen "channels" in order to facilitate
+ * The remote control can be assigned one of sixteen "channels" in order to facilitate
  * the use of multiple remote controls within range of each other.
  * A remote's "channel" may be altered by pressing and holding the "PC" button for
  * approximately 3 seconds, after which the button will slowly flash the count of the

drivers/input/mouse/Kconfig

@@ -133,6 +133,18 @@ config MOUSE_PS2_ELANTECH
 
 	  If unsure, say N.
 
+config MOUSE_PS2_ELANTECH_SMBUS
+	bool "Elantech PS/2 SMbus companion" if EXPERT
+	default y
+	depends on MOUSE_PS2 && MOUSE_PS2_ELANTECH
+	depends on I2C=y || I2C=MOUSE_PS2
+	select MOUSE_PS2_SMBUS
+	help
+	  Say Y here if you have a Elantech touchpad connected to
+	  to an SMBus, but enumerated through PS/2.
+
+	  If unsure, say Y.
+
 config MOUSE_PS2_SENTELIC
 	bool "Sentelic Finger Sensing Pad PS/2 protocol extension"
 	depends on MOUSE_PS2

drivers/input/mouse/alps.c

@@ -2049,14 +2049,11 @@ static int alps_hw_init_v1_v2(struct psmouse *psmouse)
 	return 0;
 }
 
-static int alps_hw_init_v6(struct psmouse *psmouse)
+/* Must be in passthrough mode when calling this function */
+static int alps_trackstick_enter_extended_mode_v3_v6(struct psmouse *psmouse)
 {
 	unsigned char param[2] = {0xC8, 0x14};
 
-	/* Enter passthrough mode to let trackpoint enter 6byte raw mode */
-	if (alps_passthrough_mode_v2(psmouse, true))
-		return -1;
-
 	if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
 	    ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
 	    ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
@@ -2064,9 +2061,25 @@ static int alps_hw_init_v6(struct psmouse *psmouse)
 	    ps2_command(&psmouse->ps2dev, &param[1], PSMOUSE_CMD_SETRATE))
 		return -1;
 
+	return 0;
+}
+
+static int alps_hw_init_v6(struct psmouse *psmouse)
+{
+	int ret;
+
+	/* Enter passthrough mode to let trackpoint enter 6byte raw mode */
+	if (alps_passthrough_mode_v2(psmouse, true))
+		return -1;
+
+	ret = alps_trackstick_enter_extended_mode_v3_v6(psmouse);
+
 	if (alps_passthrough_mode_v2(psmouse, false))
 		return -1;
 
+	if (ret)
+		return ret;
+
 	if (alps_absolute_mode_v6(psmouse)) {
 		psmouse_err(psmouse, "Failed to enable absolute mode\n");
 		return -1;
@@ -2140,10 +2153,18 @@ static int alps_probe_trackstick_v3_v7(struct psmouse *psmouse, int reg_base)
 
 static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base)
 {
-	struct ps2dev *ps2dev = &psmouse->ps2dev;
 	int ret = 0;
+	int reg_val;
 	unsigned char param[4];
 
+	/*
+	 * We need to configure trackstick to report data for touchpad in
+	 * extended format. And also we need to tell touchpad to expect data
+	 * from trackstick in extended format. Without this configuration
+	 * trackstick packets sent from touchpad are in basic format which is
+	 * different from what we expect.
+	 */
+
 	if (alps_passthrough_mode_v3(psmouse, reg_base, true))
 		return -EIO;
 
@@ -2161,39 +2182,36 @@ static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base)
 		ret = -ENODEV;
 	} else {
 		psmouse_dbg(psmouse, "trackstick E7 report: %3ph\n", param);
-
-		/*
-		 * Not sure what this does, but it is absolutely
-		 * essential. Without it, the touchpad does not
-		 * work at all and the trackstick just emits normal
-		 * PS/2 packets.
-		 */
-		if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
-		    ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
-		    ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
-		    alps_command_mode_send_nibble(psmouse, 0x9) ||
-		    alps_command_mode_send_nibble(psmouse, 0x4)) {
-			psmouse_err(psmouse,
-				    "Error sending magic E6 sequence\n");
+		if (alps_trackstick_enter_extended_mode_v3_v6(psmouse)) {
+			psmouse_err(psmouse, "Failed to enter into trackstick extended mode\n");
 			ret = -EIO;
-			goto error;
 		}
+	}
+
+	if (alps_passthrough_mode_v3(psmouse, reg_base, false))
+		return -EIO;
+
+	if (ret)
+		return ret;
 
+	if (alps_enter_command_mode(psmouse))
+		return -EIO;
+
+	reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08);
+	if (reg_val == -1) {
+		ret = -EIO;
+	} else {
 		/*
-		 * This ensures the trackstick packets are in the format
-		 * supported by this driver. If bit 1 isn't set the packet
-		 * format is different.
+		 * Tell touchpad that trackstick is now in extended mode.
+		 * If bit 1 isn't set the packet format is different.
 		 */
-		if (alps_enter_command_mode(psmouse) ||
-		    alps_command_mode_write_reg(psmouse,
-						reg_base + 0x08, 0x82) ||
-		    alps_exit_command_mode(psmouse))
+		reg_val |= BIT(1);
+		if (__alps_command_mode_write_reg(psmouse, reg_val))
 			ret = -EIO;
 	}
 
-error:
-	if (alps_passthrough_mode_v3(psmouse, reg_base, false))
-		ret = -EIO;
+	if (alps_exit_command_mode(psmouse))
+		return -EIO;
 
 	return ret;
 }

drivers/input/mouse/elan_i2c_core.c

@@ -36,6 +36,7 @@
 #include <linux/jiffies.h>
 #include <linux/completion.h>
 #include <linux/of.h>
+#include <linux/property.h>
 #include <linux/regulator/consumer.h>
 #include <asm/unaligned.h>
 
@@ -51,6 +52,7 @@
 #define ETP_MAX_FINGERS		5
 #define ETP_FINGER_DATA_LEN	5
 #define ETP_REPORT_ID		0x5D
+#define ETP_TP_REPORT_ID	0x5E
 #define ETP_REPORT_ID_OFFSET	2
 #define ETP_TOUCH_INFO_OFFSET	3
 #define ETP_FINGER_DATA_OFFSET	4
@@ -61,6 +63,7 @@
 struct elan_tp_data {
 	struct i2c_client	*client;
 	struct input_dev	*input;
+	struct input_dev	*tp_input; /* trackpoint input node */
 	struct regulator	*vcc;
 
 	const struct elan_transport_ops *ops;
@@ -930,6 +933,33 @@ static void elan_report_absolute(struct elan_tp_data *data, u8 *packet)
 	input_sync(input);
 }
 
+static void elan_report_trackpoint(struct elan_tp_data *data, u8 *report)
+{
+	struct input_dev *input = data->tp_input;
+	u8 *packet = &report[ETP_REPORT_ID_OFFSET + 1];
+	int x, y;
+
+	if (!data->tp_input) {
+		dev_warn_once(&data->client->dev,
+			      "received a trackpoint report while no trackpoint device has been created. Please report upstream.\n");
+		return;
+	}
+
+	input_report_key(input, BTN_LEFT, packet[0] & 0x01);
+	input_report_key(input, BTN_RIGHT, packet[0] & 0x02);
+	input_report_key(input, BTN_MIDDLE, packet[0] & 0x04);
+
+	if ((packet[3] & 0x0F) == 0x06) {
+		x = packet[4] - (int)((packet[1] ^ 0x80) << 1);
+		y = (int)((packet[2] ^ 0x80) << 1) - packet[5];
+
+		input_report_rel(input, REL_X, x);
+		input_report_rel(input, REL_Y, y);
+	}
+
+	input_sync(input);
+}
+
 static irqreturn_t elan_isr(int irq, void *dev_id)
 {
 	struct elan_tp_data *data = dev_id;
@@ -951,11 +981,17 @@ static irqreturn_t elan_isr(int irq, void *dev_id)
 	if (error)
 		goto out;
 
-	if (report[ETP_REPORT_ID_OFFSET] != ETP_REPORT_ID)
+	switch (report[ETP_REPORT_ID_OFFSET]) {
+	case ETP_REPORT_ID:
+		elan_report_absolute(data, report);
+		break;
+	case ETP_TP_REPORT_ID:
+		elan_report_trackpoint(data, report);
+		break;
+	default:
 		dev_err(dev, "invalid report id data (%x)\n",
 			report[ETP_REPORT_ID_OFFSET]);
-	else
-		elan_report_absolute(data, report);
+	}
 
 out:
 	return IRQ_HANDLED;
@@ -966,6 +1002,36 @@ static irqreturn_t elan_isr(int irq, void *dev_id)
  * Elan initialization functions
  ******************************************************************
  */
+
+static int elan_setup_trackpoint_input_device(struct elan_tp_data *data)
+{
+	struct device *dev = &data->client->dev;
+	struct input_dev *input;
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+
+	input->name = "Elan TrackPoint";
+	input->id.bustype = BUS_I2C;
+	input->id.vendor = ELAN_VENDOR_ID;
+	input->id.product = data->product_id;
+	input_set_drvdata(input, data);
+
+	input_set_capability(input, EV_REL, REL_X);
+	input_set_capability(input, EV_REL, REL_Y);
+	input_set_capability(input, EV_KEY, BTN_LEFT);
+	input_set_capability(input, EV_KEY, BTN_RIGHT);
+	input_set_capability(input, EV_KEY, BTN_MIDDLE);
+
+	__set_bit(INPUT_PROP_POINTER, input->propbit);
+	__set_bit(INPUT_PROP_POINTING_STICK, input->propbit);
+
+	data->tp_input = input;
+
+	return 0;
+}
+
 static int elan_setup_input_device(struct elan_tp_data *data)
 {
 	struct device *dev = &data->client->dev;
@@ -1140,6 +1206,12 @@ static int elan_probe(struct i2c_client *client,
 	if (error)
 		return error;
 
+	if (device_property_read_bool(&client->dev, "elan,trackpoint")) {
+		error = elan_setup_trackpoint_input_device(data);
+		if (error)
+			return error;
+	}
+
 	/*
 	 * Platform code (ACPI, DTS) should normally set up interrupt
 	 * for us, but in case it did not let's fall back to using falling
@@ -1177,6 +1249,16 @@ static int elan_probe(struct i2c_client *client,
 		return error;
 	}
 
+	if (data->tp_input) {
+		error = input_register_device(data->tp_input);
+		if (error) {
+			dev_err(&client->dev,
+				"failed to register TrackPoint input device: %d\n",
+				error);
+			return error;
+		}
+	}
+
 	/*
 	 * Systems using device tree should set up wakeup via DTS,
 	 * the rest will configure device as wakeup source by default.
@@ -1262,6 +1344,7 @@ static const struct acpi_device_id elan_acpi_id[] = {
 	{ "ELAN060B", 0 },
 	{ "ELAN060C", 0 },
 	{ "ELAN0611", 0 },
+	{ "ELAN0612", 0 },
 	{ "ELAN1000", 0 },
 	{ }
 };

drivers/input/mouse/elantech.c

@@ -14,17 +14,20 @@
 #include <linux/dmi.h>
 #include <linux/slab.h>
 #include <linux/module.h>
+#include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/input/mt.h>
+#include <linux/platform_device.h>
 #include <linux/serio.h>
 #include <linux/libps2.h>
 #include <asm/unaligned.h>
 #include "psmouse.h"
 #include "elantech.h"
+#include "elan_i2c.h"
 
 #define elantech_debug(fmt, ...)					\
 	do {								\
-		if (etd->debug)						\
+		if (etd->info.debug)					\
 			psmouse_printk(KERN_DEBUG, psmouse,		\
 					fmt, ##__VA_ARGS__);		\
 	} while (0)
@@ -105,7 +108,7 @@ static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg,
 	if (reg > 0x11 && reg < 0x20)
 		return -1;
 
-	switch (etd->hw_version) {
+	switch (etd->info.hw_version) {
 	case 1:
 		if (ps2_sliced_command(&psmouse->ps2dev, ETP_REGISTER_READ) ||
 		    ps2_sliced_command(&psmouse->ps2dev, reg) ||
@@ -137,7 +140,7 @@ static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg,
 
 	if (rc)
 		psmouse_err(psmouse, "failed to read register 0x%02x.\n", reg);
-	else if (etd->hw_version != 4)
+	else if (etd->info.hw_version != 4)
 		*val = param[0];
 	else
 		*val = param[1];
@@ -160,7 +163,7 @@ static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg,
 	if (reg > 0x11 && reg < 0x20)
 		return -1;
 
-	switch (etd->hw_version) {
+	switch (etd->info.hw_version) {
 	case 1:
 		if (ps2_sliced_command(&psmouse->ps2dev, ETP_REGISTER_WRITE) ||
 		    ps2_sliced_command(&psmouse->ps2dev, reg) ||
@@ -237,7 +240,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
 	unsigned char *packet = psmouse->packet;
 	int fingers;
 
-	if (etd->fw_version < 0x020000) {
+	if (etd->info.fw_version < 0x020000) {
 		/*
 		 * byte 0:  D   U  p1  p2   1  p3   R   L
 		 * byte 1:  f   0  th  tw  x9  x8  y9  y8
@@ -252,7 +255,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
 		fingers = (packet[0] & 0xc0) >> 6;
 	}
 
-	if (etd->jumpy_cursor) {
+	if (etd->info.jumpy_cursor) {
 		if (fingers != 1) {
 			etd->single_finger_reports = 0;
 		} else if (etd->single_finger_reports < 2) {
@@ -282,8 +285,8 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
 
 	psmouse_report_standard_buttons(dev, packet[0]);
 
-	if (etd->fw_version < 0x020000 &&
-	    (etd->capabilities[0] & ETP_CAP_HAS_ROCKER)) {
+	if (etd->info.fw_version < 0x020000 &&
+	    (etd->info.capabilities[0] & ETP_CAP_HAS_ROCKER)) {
 		/* rocker up */
 		input_report_key(dev, BTN_FORWARD, packet[0] & 0x40);
 		/* rocker down */
@@ -391,7 +394,7 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
 	input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
 	input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4);
 	psmouse_report_standard_buttons(dev, packet[0]);
-	if (etd->reports_pressure) {
+	if (etd->info.reports_pressure) {
 		input_report_abs(dev, ABS_PRESSURE, pres);
 		input_report_abs(dev, ABS_TOOL_WIDTH, width);
 	}
@@ -444,7 +447,7 @@ static void elantech_report_trackpoint(struct psmouse *psmouse,
 
 	default:
 		/* Dump unexpected packet sequences if debug=1 (default) */
-		if (etd->debug == 1)
+		if (etd->info.debug == 1)
 			elantech_packet_dump(psmouse);
 
 		break;
@@ -523,7 +526,7 @@ static void elantech_report_absolute_v3(struct psmouse *psmouse,
 	input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
 
 	/* For clickpads map both buttons to BTN_LEFT */
-	if (etd->fw_version & 0x001000)
+	if (etd->info.fw_version & 0x001000)
 		input_report_key(dev, BTN_LEFT, packet[0] & 0x03);
 	else
 		psmouse_report_standard_buttons(dev, packet[0]);
@@ -541,7 +544,7 @@ static void elantech_input_sync_v4(struct psmouse *psmouse)
 	unsigned char *packet = psmouse->packet;
 
 	/* For clickpads map both buttons to BTN_LEFT */
-	if (etd->fw_version & 0x001000)
+	if (etd->info.fw_version & 0x001000)
 		input_report_key(dev, BTN_LEFT, packet[0] & 0x03);
 	else
 		psmouse_report_standard_buttons(dev, packet[0]);
@@ -669,7 +672,7 @@ static int elantech_packet_check_v1(struct psmouse *psmouse)
 	unsigned char p1, p2, p3;
 
 	/* Parity bits are placed differently */
-	if (etd->fw_version < 0x020000) {
+	if (etd->info.fw_version < 0x020000) {
 		/* byte 0:  D   U  p1  p2   1  p3   R   L */
 		p1 = (packet[0] & 0x20) >> 5;
 		p2 = (packet[0] & 0x10) >> 4;
@@ -714,7 +717,7 @@ static int elantech_packet_check_v2(struct psmouse *psmouse)
 	 * With all three cases, if the constant bits are not exactly what I
 	 * expected, I consider them invalid.
 	 */
-	if (etd->reports_pressure)
+	if (etd->info.reports_pressure)
 		return (packet[0] & 0x0c) == 0x04 &&
 		       (packet[3] & 0x0f) == 0x02;
 
@@ -751,7 +754,7 @@ static int elantech_packet_check_v3(struct psmouse *psmouse)
 	 * If the hardware flag 'crc_enabled' is set the packets have
 	 * different signatures.
 	 */
-	if (etd->crc_enabled) {
+	if (etd->info.crc_enabled) {
 		if ((packet[3] & 0x09) == 0x08)
 			return PACKET_V3_HEAD;
 
@@ -782,7 +785,7 @@ static int elantech_packet_check_v4(struct psmouse *psmouse)
 		return PACKET_TRACKPOINT;
 
 	/* This represents the version of IC body. */
-	ic_version = (etd->fw_version & 0x0f0000) >> 16;
+	ic_version = (etd->info.fw_version & 0x0f0000) >> 16;
 
 	/*
 	 * Sanity check based on the constant bits of a packet.
@@ -791,9 +794,9 @@ static int elantech_packet_check_v4(struct psmouse *psmouse)
 	 * the IC body, but are the same for every packet,
 	 * regardless of the type.
 	 */
-	if (etd->crc_enabled)
+	if (etd->info.crc_enabled)
 		sanity_check = ((packet[3] & 0x08) == 0x00);
-	else if (ic_version == 7 && etd->samples[1] == 0x2A)
+	else if (ic_version == 7 && etd->info.samples[1] == 0x2A)
 		sanity_check = ((packet[3] & 0x1c) == 0x10);
 	else
 		sanity_check = ((packet[0] & 0x0c) == 0x04 &&
@@ -827,12 +830,12 @@ static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
 	if (psmouse->pktcnt < psmouse->pktsize)
 		return PSMOUSE_GOOD_DATA;
 
-	if (etd->debug > 1)
+	if (etd->info.debug > 1)
 		elantech_packet_dump(psmouse);
 
-	switch (etd->hw_version) {
+	switch (etd->info.hw_version) {
 	case 1:
-		if (etd->paritycheck && !elantech_packet_check_v1(psmouse))
+		if (etd->info.paritycheck && !elantech_packet_check_v1(psmouse))
 			return PSMOUSE_BAD_DATA;
 
 		elantech_report_absolute_v1(psmouse);
@@ -843,7 +846,7 @@ static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
 		if (elantech_debounce_check_v2(psmouse))
 			return PSMOUSE_FULL_PACKET;
 
-		if (etd->paritycheck && !elantech_packet_check_v2(psmouse))
+		if (etd->info.paritycheck && !elantech_packet_check_v2(psmouse))
 			return PSMOUSE_BAD_DATA;
 
 		elantech_report_absolute_v2(psmouse);
@@ -916,7 +919,7 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
 	int tries = ETP_READ_BACK_TRIES;
 	int rc = 0;
 
-	switch (etd->hw_version) {
+	switch (etd->info.hw_version) {
 	case 1:
 		etd->reg_10 = 0x16;
 		etd->reg_11 = 0x8f;
@@ -939,7 +942,7 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
 		break;
 
 	case 3:
-		if (etd->set_hw_resolution)
+		if (etd->info.set_hw_resolution)
 			etd->reg_10 = 0x0b;
 		else
 			etd->reg_10 = 0x01;
@@ -976,7 +979,7 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
 		if (rc) {
 			psmouse_err(psmouse,
 				    "failed to read back register 0x10.\n");
-		} else if (etd->hw_version == 1 &&
+		} else if (etd->info.hw_version == 1 &&
 			   !(val & ETP_R10_ABSOLUTE_MODE)) {
 			psmouse_err(psmouse,
 				    "touchpad refuses to switch to absolute mode.\n");
@@ -997,10 +1000,11 @@ static int elantech_set_range(struct psmouse *psmouse,
 			      unsigned int *width)
 {
 	struct elantech_data *etd = psmouse->private;
+	struct elantech_device_info *info = &etd->info;
 	unsigned char param[3];
 	unsigned char traces;
 
-	switch (etd->hw_version) {
+	switch (info->hw_version) {
 	case 1:
 		*x_min = ETP_XMIN_V1;
 		*y_min = ETP_YMIN_V1;
@@ -1009,9 +1013,9 @@ static int elantech_set_range(struct psmouse *psmouse,
 		break;
 
 	case 2:
-		if (etd->fw_version == 0x020800 ||
-		    etd->fw_version == 0x020b00 ||
-		    etd->fw_version == 0x020030) {
+		if (info->fw_version == 0x020800 ||
+		    info->fw_version == 0x020b00 ||
+		    info->fw_version == 0x020030) {
 			*x_min = ETP_XMIN_V2;
 			*y_min = ETP_YMIN_V2;
 			*x_max = ETP_XMAX_V2;
@@ -1020,35 +1024,35 @@ static int elantech_set_range(struct psmouse *psmouse,
 			int i;
 			int fixed_dpi;
 
-			i = (etd->fw_version > 0x020800 &&
-			     etd->fw_version < 0x020900) ? 1 : 2;
+			i = (info->fw_version > 0x020800 &&
+			     info->fw_version < 0x020900) ? 1 : 2;
 
-			if (etd->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
+			if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
 				return -1;
 
 			fixed_dpi = param[1] & 0x10;
 
-			if (((etd->fw_version >> 16) == 0x14) && fixed_dpi) {
-				if (etd->send_cmd(psmouse, ETP_SAMPLE_QUERY, param))
+			if (((info->fw_version >> 16) == 0x14) && fixed_dpi) {
+				if (info->send_cmd(psmouse, ETP_SAMPLE_QUERY, param))
 					return -1;
 
-				*x_max = (etd->capabilities[1] - i) * param[1] / 2;
-				*y_max = (etd->capabilities[2] - i) * param[2] / 2;
-			} else if (etd->fw_version == 0x040216) {
+				*x_max = (info->capabilities[1] - i) * param[1] / 2;
+				*y_max = (info->capabilities[2] - i) * param[2] / 2;
+			} else if (info->fw_version == 0x040216) {
 				*x_max = 819;
 				*y_max = 405;
-			} else if (etd->fw_version == 0x040219 || etd->fw_version == 0x040215) {
+			} else if (info->fw_version == 0x040219 || info->fw_version == 0x040215) {
 				*x_max = 900;
 				*y_max = 500;
 			} else {
-				*x_max = (etd->capabilities[1] - i) * 64;
-				*y_max = (etd->capabilities[2] - i) * 64;
+				*x_max = (info->capabilities[1] - i) * 64;
+				*y_max = (info->capabilities[2] - i) * 64;
 			}
 		}
 		break;
 
 	case 3:
-		if (etd->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
+		if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
 			return -1;
 
 		*x_max = (0x0f & param[0]) << 8 | param[1];
@@ -1056,12 +1060,12 @@ static int elantech_set_range(struct psmouse *psmouse,
 		break;
 
 	case 4:
-		if (etd->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
+		if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
 			return -1;
 
 		*x_max = (0x0f & param[0]) << 8 | param[1];
 		*y_max = (0xf0 & param[0]) << 4 | param[2];
-		traces = etd->capabilities[1];
+		traces = info->capabilities[1];
 		if ((traces < 2) || (traces > *x_max))
 			return -1;
 
@@ -1083,7 +1087,8 @@ static unsigned int elantech_convert_res(unsigned int val)
 
 static int elantech_get_resolution_v4(struct psmouse *psmouse,
 				      unsigned int *x_res,
-				      unsigned int *y_res)
+				      unsigned int *y_res,
+				      unsigned int *bus)
 {
 	unsigned char param[3];
 
@@ -1092,6 +1097,7 @@ static int elantech_get_resolution_v4(struct psmouse *psmouse,
 
 	*x_res = elantech_convert_res(param[1] & 0x0f);
 	*y_res = elantech_convert_res((param[1] & 0xf0) >> 4);
+	*bus = param[2];
 
 	return 0;
 }
@@ -1140,7 +1146,7 @@ static void elantech_set_buttonpad_prop(struct psmouse *psmouse)
 	struct input_dev *dev = psmouse->dev;
 	struct elantech_data *etd = psmouse->private;
 
-	if (etd->fw_version & 0x001000) {
+	if (etd->info.fw_version & 0x001000) {
 		__set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
 		__clear_bit(BTN_RIGHT, dev->keybit);
 	}
@@ -1176,8 +1182,8 @@ static int elantech_set_input_params(struct psmouse *psmouse)
 {
 	struct input_dev *dev = psmouse->dev;
 	struct elantech_data *etd = psmouse->private;
+	struct elantech_device_info *info = &etd->info;
 	unsigned int x_min = 0, y_min = 0, x_max = 0, y_max = 0, width = 0;
-	unsigned int x_res = 31, y_res = 31;
 
 	if (elantech_set_range(psmouse, &x_min, &y_min, &x_max, &y_max, &width))
 		return -1;
@@ -1197,11 +1203,11 @@ static int elantech_set_input_params(struct psmouse *psmouse)
 	__set_bit(BTN_TOOL_DOUBLETAP, dev->keybit);
 	__set_bit(BTN_TOOL_TRIPLETAP, dev->keybit);
 
-	switch (etd->hw_version) {
+	switch (info->hw_version) {
 	case 1:
 		/* Rocker button */
-		if (etd->fw_version < 0x020000 &&
-		    (etd->capabilities[0] & ETP_CAP_HAS_ROCKER)) {
+		if (info->fw_version < 0x020000 &&
+		    (info->capabilities[0] & ETP_CAP_HAS_ROCKER)) {
 			__set_bit(BTN_FORWARD, dev->keybit);
 			__set_bit(BTN_BACK, dev->keybit);
 		}
@@ -1214,11 +1220,11 @@ static int elantech_set_input_params(struct psmouse *psmouse)
 		__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
 		/* fall through */
 	case 3:
-		if (etd->hw_version == 3)
+		if (info->hw_version == 3)
 			elantech_set_buttonpad_prop(psmouse);
 		input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
 		input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
-		if (etd->reports_pressure) {
+		if (info->reports_pressure) {
 			input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2,
 					     ETP_PMAX_V2, 0, 0);
 			input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
@@ -1230,13 +1236,6 @@ static int elantech_set_input_params(struct psmouse *psmouse)
 		break;
 
 	case 4:
-		if (elantech_get_resolution_v4(psmouse, &x_res, &y_res)) {
-			/*
-			 * if query failed, print a warning and leave the values
-			 * zero to resemble synaptics.c behavior.
-			 */
-			psmouse_warn(psmouse, "couldn't query resolution data.\n");
-		}
 		elantech_set_buttonpad_prop(psmouse);
 		__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
 		/* For X to recognize me as touchpad. */
@@ -1265,11 +1264,11 @@ static int elantech_set_input_params(struct psmouse *psmouse)
 		break;
 	}
 
-	input_abs_set_res(dev, ABS_X, x_res);
-	input_abs_set_res(dev, ABS_Y, y_res);
-	if (etd->hw_version > 1) {
-		input_abs_set_res(dev, ABS_MT_POSITION_X, x_res);
-		input_abs_set_res(dev, ABS_MT_POSITION_Y, y_res);
+	input_abs_set_res(dev, ABS_X, info->x_res);
+	input_abs_set_res(dev, ABS_Y, info->y_res);
+	if (info->hw_version > 1) {
+		input_abs_set_res(dev, ABS_MT_POSITION_X, info->x_res);
+		input_abs_set_res(dev, ABS_MT_POSITION_Y, info->y_res);
 	}
 
 	etd->y_max = y_max;
@@ -1317,7 +1316,7 @@ static ssize_t elantech_set_int_attr(struct psmouse *psmouse,
 		return err;
 
 	/* Do we need to preserve some bits for version 2 hardware too? */
-	if (etd->hw_version == 1) {
+	if (etd->info.hw_version == 1) {
 		if (attr->reg == 0x10)
 			/* Force absolute mode always on */
 			value |= ETP_R10_ABSOLUTE_MODE;
@@ -1337,11 +1336,22 @@ static ssize_t elantech_set_int_attr(struct psmouse *psmouse,
 		.field_offset = offsetof(struct elantech_data, _name),	\
 		.reg = _register,					\
 	};								\
-	PSMOUSE_DEFINE_ATTR(_name, S_IWUSR | S_IRUGO,			\
+	PSMOUSE_DEFINE_ATTR(_name, 0644,				\
 			    &elantech_attr_##_name,			\
 			    elantech_show_int_attr,			\
 			    elantech_set_int_attr)
 
+#define ELANTECH_INFO_ATTR(_name)					       \
+	static struct elantech_attr_data elantech_attr_##_name = {	       \
+		.field_offset = offsetof(struct elantech_data, info) +	       \
+				offsetof(struct elantech_device_info, _name),  \
+		.reg = 0,						       \
+	};								       \
+	PSMOUSE_DEFINE_ATTR(_name, 0644,				       \
+			    &elantech_attr_##_name,			       \
+			    elantech_show_int_attr,			       \
+			    elantech_set_int_attr)
+
 ELANTECH_INT_ATTR(reg_07, 0x07);
 ELANTECH_INT_ATTR(reg_10, 0x10);
 ELANTECH_INT_ATTR(reg_11, 0x11);
@@ -1352,9 +1362,9 @@ ELANTECH_INT_ATTR(reg_23, 0x23);
 ELANTECH_INT_ATTR(reg_24, 0x24);
 ELANTECH_INT_ATTR(reg_25, 0x25);
 ELANTECH_INT_ATTR(reg_26, 0x26);
-ELANTECH_INT_ATTR(debug, 0);
-ELANTECH_INT_ATTR(paritycheck, 0);
-ELANTECH_INT_ATTR(crc_enabled, 0);
+ELANTECH_INFO_ATTR(debug);
+ELANTECH_INFO_ATTR(paritycheck);
+ELANTECH_INFO_ATTR(crc_enabled);
 
 static struct attribute *elantech_attrs[] = {
 	&psmouse_attr_reg_07.dattr.attr,
@@ -1469,6 +1479,12 @@ static void elantech_disconnect(struct psmouse *psmouse)
 {
 	struct elantech_data *etd = psmouse->private;
 
+	/*
+	 * We might have left a breadcrumb when trying to
+	 * set up SMbus companion.
+	 */
+	psmouse_smbus_cleanup(psmouse);
+
 	if (etd->tp_dev)
 		input_unregister_device(etd->tp_dev);
 	sysfs_remove_group(&psmouse->ps2dev.serio->dev.kobj,
@@ -1588,25 +1604,25 @@ static const struct dmi_system_id no_hw_res_dmi_table[] = {
 /*
  * determine hardware version and set some properties according to it.
  */
-static int elantech_set_properties(struct elantech_data *etd)
+static int elantech_set_properties(struct elantech_device_info *info)
 {
 	/* This represents the version of IC body. */
-	int ver = (etd->fw_version & 0x0f0000) >> 16;
+	int ver = (info->fw_version & 0x0f0000) >> 16;
 
 	/* Early version of Elan touchpads doesn't obey the rule. */
-	if (etd->fw_version < 0x020030 || etd->fw_version == 0x020600)
-		etd->hw_version = 1;
+	if (info->fw_version < 0x020030 || info->fw_version == 0x020600)
+		info->hw_version = 1;
 	else {
 		switch (ver) {
 		case 2:
 		case 4:
-			etd->hw_version = 2;
+			info->hw_version = 2;
 			break;
 		case 5:
-			etd->hw_version = 3;
+			info->hw_version = 3;
 			break;
 		case 6 ... 15:
-			etd->hw_version = 4;
+			info->hw_version = 4;
 			break;
 		default:
 			return -1;
@@ -1614,100 +1630,88 @@ static int elantech_set_properties(struct elantech_data *etd)
 	}
 
 	/* decide which send_cmd we're gonna use early */
-	etd->send_cmd = etd->hw_version >= 3 ? elantech_send_cmd :
-					       synaptics_send_cmd;
+	info->send_cmd = info->hw_version >= 3 ? elantech_send_cmd :
+						 synaptics_send_cmd;
 
 	/* Turn on packet checking by default */
-	etd->paritycheck = 1;
+	info->paritycheck = 1;
 
 	/*
 	 * This firmware suffers from misreporting coordinates when
 	 * a touch action starts causing the mouse cursor or scrolled page
 	 * to jump. Enable a workaround.
 	 */
-	etd->jumpy_cursor =
-		(etd->fw_version == 0x020022 || etd->fw_version == 0x020600);
+	info->jumpy_cursor =
+		(info->fw_version == 0x020022 || info->fw_version == 0x020600);
 
-	if (etd->hw_version > 1) {
+	if (info->hw_version > 1) {
 		/* For now show extra debug information */
-		etd->debug = 1;
+		info->debug = 1;
 
-		if (etd->fw_version >= 0x020800)
-			etd->reports_pressure = true;
+		if (info->fw_version >= 0x020800)
+			info->reports_pressure = true;
 	}
 
 	/*
 	 * The signatures of v3 and v4 packets change depending on the
 	 * value of this hardware flag.
 	 */
-	etd->crc_enabled = (etd->fw_version & 0x4000) == 0x4000 ||
-			   dmi_check_system(elantech_dmi_force_crc_enabled);
+	info->crc_enabled = (info->fw_version & 0x4000) == 0x4000 ||
+			     dmi_check_system(elantech_dmi_force_crc_enabled);
 
 	/* Enable real hardware resolution on hw_version 3 ? */
-	etd->set_hw_resolution = !dmi_check_system(no_hw_res_dmi_table);
+	info->set_hw_resolution = !dmi_check_system(no_hw_res_dmi_table);
 
 	return 0;
 }
 
-/*
- * Initialize the touchpad and create sysfs entries
- */
-int elantech_init(struct psmouse *psmouse)
+static int elantech_query_info(struct psmouse *psmouse,
+			       struct elantech_device_info *info)
 {
-	struct elantech_data *etd;
-	int i;
-	int error = -EINVAL;
 	unsigned char param[3];
-	struct input_dev *tp_dev;
 
-	psmouse->private = etd = kzalloc(sizeof(struct elantech_data), GFP_KERNEL);
-	if (!etd)
-		return -ENOMEM;
-
-	psmouse_reset(psmouse);
-
-	etd->parity[0] = 1;
-	for (i = 1; i < 256; i++)
-		etd->parity[i] = etd->parity[i & (i - 1)] ^ 1;
+	memset(info, 0, sizeof(*info));
 
 	/*
 	 * Do the version query again so we can store the result
 	 */
 	if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
 		psmouse_err(psmouse, "failed to query firmware version.\n");
-		goto init_fail;
+		return -EINVAL;
 	}
-	etd->fw_version = (param[0] << 16) | (param[1] << 8) | param[2];
+	info->fw_version = (param[0] << 16) | (param[1] << 8) | param[2];
 
-	if (elantech_set_properties(etd)) {
+	if (elantech_set_properties(info)) {
 		psmouse_err(psmouse, "unknown hardware version, aborting...\n");
-		goto init_fail;
+		return -EINVAL;
 	}
 	psmouse_info(psmouse,
 		     "assuming hardware version %d (with firmware version 0x%02x%02x%02x)\n",
-		     etd->hw_version, param[0], param[1], param[2]);
+		     info->hw_version, param[0], param[1], param[2]);
 
-	if (etd->send_cmd(psmouse, ETP_CAPABILITIES_QUERY,
-	    etd->capabilities)) {
+	if (info->send_cmd(psmouse, ETP_CAPABILITIES_QUERY,
+	    info->capabilities)) {
 		psmouse_err(psmouse, "failed to query capabilities.\n");
-		goto init_fail;
+		return -EINVAL;
 	}
 	psmouse_info(psmouse,
 		     "Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n",
-		     etd->capabilities[0], etd->capabilities[1],
-		     etd->capabilities[2]);
+		     info->capabilities[0], info->capabilities[1],
+		     info->capabilities[2]);
 
-	if (etd->hw_version != 1) {
-		if (etd->send_cmd(psmouse, ETP_SAMPLE_QUERY, etd->samples)) {
+	if (info->hw_version != 1) {
+		if (info->send_cmd(psmouse, ETP_SAMPLE_QUERY, info->samples)) {
 			psmouse_err(psmouse, "failed to query sample data\n");
-			goto init_fail;
+			return -EINVAL;
 		}
 		psmouse_info(psmouse,
 			     "Elan sample query result %02x, %02x, %02x\n",
-			     etd->samples[0], etd->samples[1], etd->samples[2]);
+			     info->samples[0],
+			     info->samples[1],
+			     info->samples[2]);
 	}
 
-	if (etd->samples[1] == 0x74 && etd->hw_version == 0x03) {
+	if (info->samples[1] == 0x74 && info->hw_version == 0x03) {
 		/*
 		 * This module has a bug which makes absolute mode
 		 * unusable, so let's abort so we'll be using standard
@@ -1715,16 +1719,181 @@ int elantech_init(struct psmouse *psmouse)
 		 */
 		psmouse_info(psmouse,
 			     "absolute mode broken, forcing standard PS/2 protocol\n");
+		return -ENODEV;
+	}
+
+	/* The MSB indicates the presence of the trackpoint */
+	info->has_trackpoint = (info->capabilities[0] & 0x80) == 0x80;
+
+	info->x_res = 31;
+	info->y_res = 31;
+	if (info->hw_version == 4) {
+		if (elantech_get_resolution_v4(psmouse,
+					       &info->x_res,
+					       &info->y_res,
+					       &info->bus)) {
+			psmouse_warn(psmouse,
+				     "failed to query resolution data.\n");
+		}
+	}
+
+	return 0;
+}
+
+#if defined(CONFIG_MOUSE_PS2_ELANTECH_SMBUS)
+
+/*
+ * The newest Elantech device can use a secondary bus (over SMBus) which
+ * provides a better bandwidth and allow a better control of the touchpads.
+ * This is used to decide if we need to use this bus or not.
+ */
+enum {
+	ELANTECH_SMBUS_NOT_SET = -1,
+	ELANTECH_SMBUS_OFF,
+	ELANTECH_SMBUS_ON,
+};
+
+static int elantech_smbus = IS_ENABLED(CONFIG_MOUSE_ELAN_I2C_SMBUS) ?
+		ELANTECH_SMBUS_NOT_SET : ELANTECH_SMBUS_OFF;
+module_param_named(elantech_smbus, elantech_smbus, int, 0644);
+MODULE_PARM_DESC(elantech_smbus, "Use a secondary bus for the Elantech device.");
+
+static int elantech_create_smbus(struct psmouse *psmouse,
+				 struct elantech_device_info *info,
+				 bool leave_breadcrumbs)
+{
+	const struct property_entry i2c_properties[] = {
+		PROPERTY_ENTRY_BOOL("elan,trackpoint"),
+		{ },
+	};
+	struct i2c_board_info smbus_board = {
+		I2C_BOARD_INFO("elan_i2c", 0x15),
+		.flags = I2C_CLIENT_HOST_NOTIFY,
+	};
+
+	if (info->has_trackpoint)
+		smbus_board.properties = i2c_properties;
+
+	return psmouse_smbus_init(psmouse, &smbus_board, NULL, 0, false,
+				  leave_breadcrumbs);
+}
+
+/**
+ * elantech_setup_smbus - called once the PS/2 devices are enumerated
+ * and decides to instantiate a SMBus InterTouch device.
+ */
+static int elantech_setup_smbus(struct psmouse *psmouse,
+				struct elantech_device_info *info,
+				bool leave_breadcrumbs)
+{
+	int error;
+
+	if (elantech_smbus == ELANTECH_SMBUS_OFF)
+		return -ENXIO;
+
+	if (elantech_smbus == ELANTECH_SMBUS_NOT_SET) {
+		/*
+		 * New ICs are enabled by default.
+		 * Old ICs are up to the user to decide.
+		 */
+		if (!ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version))
+			return -ENXIO;
+	}
+
+	psmouse_info(psmouse, "Trying to set up SMBus access\n");
+
+	error = elantech_create_smbus(psmouse, info, leave_breadcrumbs);
+	if (error) {
+		if (error == -EAGAIN)
+			psmouse_info(psmouse, "SMbus companion is not ready yet\n");
+		else
+			psmouse_err(psmouse, "unable to create intertouch device\n");
+
+		return error;
+	}
+
+	return 0;
+}
+
+static bool elantech_use_host_notify(struct psmouse *psmouse,
+				     struct elantech_device_info *info)
+{
+	if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version))
+		return true;
+
+	switch (info->bus) {
+	case ETP_BUS_PS2_ONLY:
+		/* expected case */
+		break;
+	case ETP_BUS_SMB_ALERT_ONLY:
+		/* fall-through  */
+	case ETP_BUS_PS2_SMB_ALERT:
+		psmouse_dbg(psmouse, "Ignoring SMBus provider through alert protocol.\n");
+		break;
+	case ETP_BUS_SMB_HST_NTFY_ONLY:
+		/* fall-through  */
+	case ETP_BUS_PS2_SMB_HST_NTFY:
+		return true;
+	default:
+		psmouse_dbg(psmouse,
+			    "Ignoring SMBus bus provider %d.\n",
+			    info->bus);
+	}
+
+	return false;
+}
+
+int elantech_init_smbus(struct psmouse *psmouse)
+{
+	struct elantech_device_info info;
+	int error = -EINVAL;
+
+	psmouse_reset(psmouse);
+
+	error = elantech_query_info(psmouse, &info);
+	if (error)
+		goto init_fail;
+
+	if (info.hw_version < 4) {
+		error = -ENXIO;
 		goto init_fail;
 	}
 
+	return elantech_create_smbus(psmouse, &info, false);
+ init_fail:
+	psmouse_reset(psmouse);
+	return error;
+}
+#endif /* CONFIG_MOUSE_PS2_ELANTECH_SMBUS */
+
+/*
+ * Initialize the touchpad and create sysfs entries
+ */
+static int elantech_setup_ps2(struct psmouse *psmouse,
+			      struct elantech_device_info *info)
+{
+	struct elantech_data *etd;
+	int i;
+	int error = -EINVAL;
+	struct input_dev *tp_dev;
+
+	psmouse->private = etd = kzalloc(sizeof(*etd), GFP_KERNEL);
+	if (!etd)
+		return -ENOMEM;
+
+	etd->info = *info;
+
+	etd->parity[0] = 1;
+	for (i = 1; i < 256; i++)
+		etd->parity[i] = etd->parity[i & (i - 1)] ^ 1;
+
 	if (elantech_set_absolute_mode(psmouse)) {
 		psmouse_err(psmouse,
 			    "failed to put touchpad into absolute mode.\n");
 		goto init_fail;
 	}
 
-	if (etd->fw_version == 0x381f17) {
+	if (info->fw_version == 0x381f17) {
 		etd->original_set_rate = psmouse->set_rate;
 		psmouse->set_rate = elantech_set_rate_restore_reg_07;
 	}
@@ -1743,8 +1912,7 @@ int elantech_init(struct psmouse *psmouse)
 		goto init_fail;
 	}
 
-	/* The MSB indicates the presence of the trackpoint */
-	if ((etd->capabilities[0] & 0x80) == 0x80) {
+	if (info->has_trackpoint) {
 		tp_dev = input_allocate_device();
 
 		if (!tp_dev) {
@@ -1780,7 +1948,7 @@ int elantech_init(struct psmouse *psmouse)
 	psmouse->protocol_handler = elantech_process_byte;
 	psmouse->disconnect = elantech_disconnect;
 	psmouse->reconnect = elantech_reconnect;
-	psmouse->pktsize = etd->hw_version > 1 ? 6 : 4;
+	psmouse->pktsize = info->hw_version > 1 ? 6 : 4;
 
 	return 0;
  init_fail_tp_reg:
@@ -1789,7 +1957,70 @@ int elantech_init(struct psmouse *psmouse)
 	sysfs_remove_group(&psmouse->ps2dev.serio->dev.kobj,
 			   &elantech_attr_group);
  init_fail:
-	psmouse_reset(psmouse);
 	kfree(etd);
 	return error;
 }
+
+int elantech_init_ps2(struct psmouse *psmouse)
+{
+	struct elantech_device_info info;
+	int error = -EINVAL;
+
+	psmouse_reset(psmouse);
+
+	error = elantech_query_info(psmouse, &info);
+	if (error)
+		goto init_fail;
+
+	error = elantech_setup_ps2(psmouse, &info);
+	if (error)
+		goto init_fail;
+
+	return 0;
+ init_fail:
+	psmouse_reset(psmouse);
+	return error;
+}
+
+int elantech_init(struct psmouse *psmouse)
+{
+	struct elantech_device_info info;
+	int error = -EINVAL;
+
+	psmouse_reset(psmouse);
+
+	error = elantech_query_info(psmouse, &info);
+	if (error)
+		goto init_fail;
+
+#if defined(CONFIG_MOUSE_PS2_ELANTECH_SMBUS)
+
+	if (elantech_use_host_notify(psmouse, &info)) {
+		if (!IS_ENABLED(CONFIG_MOUSE_ELAN_I2C_SMBUS) ||
+		    !IS_ENABLED(CONFIG_MOUSE_PS2_ELANTECH_SMBUS)) {
+			psmouse_warn(psmouse,
+				     "The touchpad can support a better bus than the too old PS/2 protocol. "
+				     "Make sure MOUSE_PS2_ELANTECH_SMBUS and MOUSE_ELAN_I2C_SMBUS are enabled to get a better touchpad experience.\n");
+		}
+		error = elantech_setup_smbus(psmouse, &info, true);
+		if (!error)
+			return PSMOUSE_ELANTECH_SMBUS;
+	}
+
+#endif /* CONFIG_MOUSE_PS2_ELANTECH_SMBUS */
+
+	error = elantech_setup_ps2(psmouse, &info);
+	if (error < 0) {
+		/*
+		 * Not using any flavor of Elantech support, so clean up
+		 * SMbus breadcrumbs, if any.
+		 */
+		psmouse_smbus_cleanup(psmouse);
+		goto init_fail;
+	}
+
+	return PSMOUSE_ELANTECH;
+ init_fail:
+	psmouse_reset(psmouse);
+	return error;
+}

drivers/input/mouse/elantech.h

@@ -106,6 +106,30 @@
  */
 #define ETP_WEIGHT_VALUE		5
 
+/*
+ * Bus information on 3rd byte of query ETP_RESOLUTION_QUERY(0x04)
+ */
+#define ETP_BUS_PS2_ONLY		0
+#define ETP_BUS_SMB_ALERT_ONLY		1
+#define ETP_BUS_SMB_HST_NTFY_ONLY	2
+#define ETP_BUS_PS2_SMB_ALERT		3
+#define ETP_BUS_PS2_SMB_HST_NTFY	4
+
+/*
+ * New ICs are either using SMBus Host Notify or just plain PS2.
+ *
+ * ETP_FW_VERSION_QUERY is:
+ * Byte 1:
+ *  - bit 0..3: IC BODY
+ * Byte 2:
+ *  - bit 4: HiddenButton
+ *  - bit 5: PS2_SMBUS_NOTIFY
+ *  - bit 6: PS2CRCCheck
+ */
+#define ETP_NEW_IC_SMBUS_HOST_NOTIFY(fw_version)	\
+		((((fw_version) & 0x0f2000) == 0x0f2000) && \
+		 ((fw_version) & 0x0000ff) > 0)
+
 /*
  * The base position for one finger, v4 hardware
  */
@@ -114,6 +138,25 @@ struct finger_pos {
 	unsigned int y;
 };
 
+struct elantech_device_info {
+	unsigned char capabilities[3];
+	unsigned char samples[3];
+	unsigned char debug;
+	unsigned char hw_version;
+	unsigned int fw_version;
+	unsigned int x_res;
+	unsigned int y_res;
+	unsigned int bus;
+	bool paritycheck;
+	bool jumpy_cursor;
+	bool reports_pressure;
+	bool crc_enabled;
+	bool set_hw_resolution;
+	bool has_trackpoint;
+	int (*send_cmd)(struct psmouse *psmouse, unsigned char c,
+			unsigned char *param);
+};
+
 struct elantech_data {
 	struct input_dev *tp_dev;	/* Relative device for trackpoint */
 	char tp_phys[32];
@@ -127,27 +170,18 @@ struct elantech_data {
 	unsigned char reg_24;
 	unsigned char reg_25;
 	unsigned char reg_26;
-	unsigned char debug;
-	unsigned char capabilities[3];
-	unsigned char samples[3];
-	bool paritycheck;
-	bool jumpy_cursor;
-	bool reports_pressure;
-	bool crc_enabled;
-	bool set_hw_resolution;
-	unsigned char hw_version;
-	unsigned int fw_version;
 	unsigned int single_finger_reports;
 	unsigned int y_max;
 	unsigned int width;
 	struct finger_pos mt[ETP_MAX_FINGERS];
 	unsigned char parity[256];
-	int (*send_cmd)(struct psmouse *psmouse, unsigned char c, unsigned char *param);
+	struct elantech_device_info info;
 	void (*original_set_rate)(struct psmouse *psmouse, unsigned int rate);
 };
 
 #ifdef CONFIG_MOUSE_PS2_ELANTECH
 int elantech_detect(struct psmouse *psmouse, bool set_properties);
+int elantech_init_ps2(struct psmouse *psmouse);
 int elantech_init(struct psmouse *psmouse);
 #else
 static inline int elantech_detect(struct psmouse *psmouse, bool set_properties)
@@ -158,6 +192,19 @@ static inline int elantech_init(struct psmouse *psmouse)
 {
 	return -ENOSYS;
 }
+static inline int elantech_init_ps2(struct psmouse *psmouse)
+{
+	return -ENOSYS;
+}
 #endif /* CONFIG_MOUSE_PS2_ELANTECH */
 
+#if defined(CONFIG_MOUSE_PS2_ELANTECH_SMBUS)
+int elantech_init_smbus(struct psmouse *psmouse);
+#else
+static inline int elantech_init_smbus(struct psmouse *psmouse)
+{
+	return -ENOSYS;
+}
+#endif /* CONFIG_MOUSE_PS2_ELANTECH_SMBUS */
+
 #endif

drivers/input/mouse/psmouse-base.c

@@ -856,7 +856,17 @@ static const struct psmouse_protocol psmouse_protocols[] = {
 		.name		= "ETPS/2",
 		.alias		= "elantech",
 		.detect		= elantech_detect,
-		.init		= elantech_init,
+		.init		= elantech_init_ps2,
+	},
+#endif
+#ifdef CONFIG_MOUSE_PS2_ELANTECH_SMBUS
+	{
+		.type		= PSMOUSE_ELANTECH_SMBUS,
+		.name		= "ETSMBus",
+		.alias		= "elantech-smbus",
+		.detect		= elantech_detect,
+		.init		= elantech_init_smbus,
+		.smbus_companion = true,
 	},
 #endif
 #ifdef CONFIG_MOUSE_PS2_SENTELIC
@@ -1158,8 +1168,13 @@ static int psmouse_extensions(struct psmouse *psmouse,
 	/* Try Elantech touchpad */
 	if (max_proto > PSMOUSE_IMEX &&
 	    psmouse_try_protocol(psmouse, PSMOUSE_ELANTECH,
-				 &max_proto, set_properties, true)) {
-		return PSMOUSE_ELANTECH;
+				 &max_proto, set_properties, false)) {
+		if (!set_properties)
+			return PSMOUSE_ELANTECH;
+
+		ret = elantech_init(psmouse);
+		if (ret >= 0)
+			return ret;
 	}
 
 	if (max_proto > PSMOUSE_IMEX) {

drivers/input/mouse/psmouse-smbus.c

@@ -23,6 +23,7 @@ struct psmouse_smbus_dev {
 	struct i2c_client *client;
 	struct list_head node;
 	bool dead;
+	bool need_deactivate;
 };
 
 static LIST_HEAD(psmouse_smbus_list);
@@ -118,7 +119,10 @@ static psmouse_ret_t psmouse_smbus_process_byte(struct psmouse *psmouse)
 
 static int psmouse_smbus_reconnect(struct psmouse *psmouse)
 {
-	psmouse_deactivate(psmouse);
+	struct psmouse_smbus_dev *smbdev = psmouse->private;
+
+	if (smbdev->need_deactivate)
+		psmouse_deactivate(psmouse);
 
 	return 0;
 }
@@ -225,6 +229,7 @@ void psmouse_smbus_cleanup(struct psmouse *psmouse)
 int psmouse_smbus_init(struct psmouse *psmouse,
 		       const struct i2c_board_info *board,
 		       const void *pdata, size_t pdata_size,
+		       bool need_deactivate,
 		       bool leave_breadcrumbs)
 {
 	struct psmouse_smbus_dev *smbdev;
@@ -236,13 +241,20 @@ int psmouse_smbus_init(struct psmouse *psmouse,
 
 	smbdev->psmouse = psmouse;
 	smbdev->board = *board;
+	smbdev->need_deactivate = need_deactivate;
 
-	smbdev->board.platform_data = kmemdup(pdata, pdata_size, GFP_KERNEL);
-	if (!smbdev->board.platform_data) {
-		kfree(smbdev);
-		return -ENOMEM;
+	if (pdata) {
+		smbdev->board.platform_data = kmemdup(pdata, pdata_size,
+						      GFP_KERNEL);
+		if (!smbdev->board.platform_data) {
+			kfree(smbdev);
+			return -ENOMEM;
+		}
 	}
 
+	if (need_deactivate)
+		psmouse_deactivate(psmouse);
+
 	psmouse->private = smbdev;
 	psmouse->protocol_handler = psmouse_smbus_process_byte;
 	psmouse->reconnect = psmouse_smbus_reconnect;
@@ -250,8 +262,6 @@ int psmouse_smbus_init(struct psmouse *psmouse,
 	psmouse->disconnect = psmouse_smbus_disconnect;
 	psmouse->resync_time = 0;
 
-	psmouse_deactivate(psmouse);
-
 	mutex_lock(&psmouse_smbus_mutex);
 	list_add_tail(&smbdev->node, &psmouse_smbus_list);
 	mutex_unlock(&psmouse_smbus_mutex);

drivers/input/mouse/psmouse.h

@@ -68,6 +68,7 @@ enum psmouse_type {
 	PSMOUSE_VMMOUSE,
 	PSMOUSE_BYD,
 	PSMOUSE_SYNAPTICS_SMBUS,
+	PSMOUSE_ELANTECH_SMBUS,
 	PSMOUSE_AUTO		/* This one should always be last */
 };
 
@@ -224,6 +225,7 @@ struct i2c_board_info;
 int psmouse_smbus_init(struct psmouse *psmouse,
 		       const struct i2c_board_info *board,
 		       const void *pdata, size_t pdata_size,
+		       bool need_deactivate,
 		       bool leave_breadcrumbs);
 void psmouse_smbus_cleanup(struct psmouse *psmouse);
 

drivers/input/mouse/synaptics.c

@@ -1754,7 +1754,7 @@ static int synaptics_create_intertouch(struct psmouse *psmouse,
 	};
 
 	return psmouse_smbus_init(psmouse, &intertouch_board,
-				  &pdata, sizeof(pdata),
+				  &pdata, sizeof(pdata), true,
 				  leave_breadcrumbs);
 }
 

drivers/input/touchscreen/Kconfig

@@ -164,6 +164,17 @@ config TOUCHSCREEN_CHIPONE_ICN8318
 	  To compile this driver as a module, choose M here: the
 	  module will be called chipone_icn8318.
 
+config TOUCHSCREEN_CHIPONE_ICN8505
+	tristate "chipone icn8505 touchscreen controller"
+	depends on I2C && ACPI
+	help
+	  Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called chipone_icn8505.
+
 config TOUCHSCREEN_CY8CTMG110
 	tristate "cy8ctmg110 touchscreen"
 	depends on I2C

drivers/input/touchscreen/Makefile

@@ -19,6 +19,7 @@ obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT)	+= atmel_mxt_ts.o
 obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR)	+= auo-pixcir-ts.o
 obj-$(CONFIG_TOUCHSCREEN_BU21013)	+= bu21013_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8318)	+= chipone_icn8318.o
+obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8505)	+= chipone_icn8505.o
 obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110)	+= cy8ctmg110_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE)	+= cyttsp_core.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C)	+= cyttsp_i2c.o cyttsp_i2c_common.o

drivers/input/touchscreen/atmel_mxt_ts.c

@@ -194,6 +194,8 @@ enum t100_type {
 
 /* Delay times */
 #define MXT_BACKUP_TIME		50	/* msec */
+#define MXT_RESET_GPIO_TIME	20	/* msec */
+#define MXT_RESET_INVALID_CHG	100	/* msec */
 #define MXT_RESET_TIME		200	/* msec */
 #define MXT_RESET_TIMEOUT	3000	/* msec */
 #define MXT_CRC_TIMEOUT		1000	/* msec */
@@ -1208,7 +1210,7 @@ static int mxt_soft_reset(struct mxt_data *data)
 		return ret;
 
 	/* Ignore CHG line for 100ms after reset */
-	msleep(100);
+	msleep(MXT_RESET_INVALID_CHG);
 
 	mxt_acquire_irq(data);
 
@@ -2999,142 +3001,6 @@ static int mxt_parse_device_properties(struct mxt_data *data)
 	return 0;
 }
 
-#ifdef CONFIG_ACPI
-
-struct mxt_acpi_platform_data {
-	const char *hid;
-	const struct property_entry *props;
-};
-
-static unsigned int samus_touchpad_buttons[] = {
-	KEY_RESERVED,
-	KEY_RESERVED,
-	KEY_RESERVED,
-	BTN_LEFT
-};
-
-static const struct property_entry samus_touchpad_props[] = {
-	PROPERTY_ENTRY_U32_ARRAY("linux,gpio-keymap", samus_touchpad_buttons),
-	{ }
-};
-
-static struct mxt_acpi_platform_data samus_platform_data[] = {
-	{
-		/* Touchpad */
-		.hid	= "ATML0000",
-		.props	= samus_touchpad_props,
-	},
-	{
-		/* Touchscreen */
-		.hid	= "ATML0001",
-	},
-	{ }
-};
-
-static unsigned int chromebook_tp_buttons[] = {
-	KEY_RESERVED,
-	KEY_RESERVED,
-	KEY_RESERVED,
-	KEY_RESERVED,
-	KEY_RESERVED,
-	BTN_LEFT
-};
-
-static const struct property_entry chromebook_tp_props[] = {
-	PROPERTY_ENTRY_U32_ARRAY("linux,gpio-keymap", chromebook_tp_buttons),
-	{ }
-};
-
-static struct mxt_acpi_platform_data chromebook_platform_data[] = {
-	{
-		/* Touchpad */
-		.hid	= "ATML0000",
-		.props	= chromebook_tp_props,
-	},
-	{
-		/* Touchscreen */
-		.hid	= "ATML0001",
-	},
-	{ }
-};
-
-static const struct dmi_system_id mxt_dmi_table[] = {
-	{
-		/* 2015 Google Pixel */
-		.ident = "Chromebook Pixel 2",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Samus"),
-		},
-		.driver_data = samus_platform_data,
-	},
-	{
-		/* Samsung Chromebook Pro */
-		.ident = "Samsung Chromebook Pro",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Google"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Caroline"),
-		},
-		.driver_data = samus_platform_data,
-	},
-	{
-		/* Other Google Chromebooks */
-		.ident = "Chromebook",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
-		},
-		.driver_data = chromebook_platform_data,
-	},
-	{ }
-};
-
-static int mxt_prepare_acpi_properties(struct i2c_client *client)
-{
-	struct acpi_device *adev;
-	const struct dmi_system_id *system_id;
-	const struct mxt_acpi_platform_data *acpi_pdata;
-
-	adev = ACPI_COMPANION(&client->dev);
-	if (!adev)
-		return -ENOENT;
-
-	system_id = dmi_first_match(mxt_dmi_table);
-	if (!system_id)
-		return -ENOENT;
-
-	acpi_pdata = system_id->driver_data;
-	if (!acpi_pdata)
-		return -ENOENT;
-
-	while (acpi_pdata->hid) {
-		if (!strcmp(acpi_device_hid(adev), acpi_pdata->hid)) {
-			/*
-			 * Remove previously installed properties if we
-			 * are probing this device not for the very first
-			 * time.
-			 */
-			device_remove_properties(&client->dev);
-
-			/*
-			 * Now install the platform-specific properties
-			 * that are missing from ACPI.
-			 */
-			device_add_properties(&client->dev, acpi_pdata->props);
-			break;
-		}
-
-		acpi_pdata++;
-	}
-
-	return 0;
-}
-#else
-static int mxt_prepare_acpi_properties(struct i2c_client *client)
-{
-	return -ENOENT;
-}
-#endif
-
 static const struct dmi_system_id chromebook_T9_suspend_dmi[] = {
 	{
 		.matches = {
@@ -3155,6 +3021,18 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	struct mxt_data *data;
 	int error;
 
+	/*
+	 * Ignore devices that do not have device properties attached to
+	 * them, as we need help determining whether we are dealing with
+	 * touch screen or touchpad.
+	 *
+	 * So far on x86 the only users of Atmel touch controllers are
+	 * Chromebooks, and chromeos_laptop driver will ensure that
+	 * necessary properties are provided (if firmware does not do that).
+	 */
+	if (!device_property_present(&client->dev, "compatible"))
+		return -ENXIO;
+
 	/*
 	 * Ignore ACPI devices representing bootloader mode.
 	 *
@@ -3186,10 +3064,6 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	data->suspend_mode = dmi_check_system(chromebook_T9_suspend_dmi) ?
 		MXT_SUSPEND_T9_CTRL : MXT_SUSPEND_DEEP_SLEEP;
 
-	error = mxt_prepare_acpi_properties(client);
-	if (error && error != -ENOENT)
-		return error;
-
 	error = mxt_parse_device_properties(data);
 	if (error)
 		return error;
@@ -3210,20 +3084,14 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		return error;
 	}
 
+	disable_irq(client->irq);
+
 	if (data->reset_gpio) {
-		data->in_bootloader = true;
-		msleep(MXT_RESET_TIME);
-		reinit_completion(&data->bl_completion);
+		msleep(MXT_RESET_GPIO_TIME);
 		gpiod_set_value(data->reset_gpio, 1);
-		error = mxt_wait_for_completion(data, &data->bl_completion,
-						MXT_RESET_TIMEOUT);
-		if (error)
-			return error;
-		data->in_bootloader = false;
+		msleep(MXT_RESET_INVALID_CHG);
 	}
 
-	disable_irq(client->irq);
-
 	error = mxt_initialize(data);
 	if (error)
 		return error;

drivers/input/touchscreen/chipone_icn8505.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for ChipOne icn8505 i2c touchscreen controller
+ *
+ * Copyright (c) 2015-2018 Red Hat Inc.
+ *
+ * Red Hat authors:
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <asm/unaligned.h>
+#include <linux/acpi.h>
+#include <linux/crc32.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/module.h>
+
+/* Normal operation mode defines */
+#define ICN8505_REG_ADDR_WIDTH		16
+
+#define ICN8505_REG_POWER		0x0004
+#define ICN8505_REG_TOUCHDATA		0x1000
+#define ICN8505_REG_CONFIGDATA		0x8000
+
+/* ICN8505_REG_POWER commands */
+#define ICN8505_POWER_ACTIVE		0x00
+#define ICN8505_POWER_MONITOR		0x01
+#define ICN8505_POWER_HIBERNATE		0x02
+/*
+ * The Android driver uses these to turn on/off the charger filter, but the
+ * filter is way too aggressive making e.g. onscreen keyboards unusable.
+ */
+#define ICN8505_POWER_ENA_CHARGER_MODE	0x55
+#define ICN8505_POWER_DIS_CHARGER_MODE	0x66
+
+#define ICN8505_MAX_TOUCHES		10
+
+/* Programming mode defines */
+#define ICN8505_PROG_I2C_ADDR		0x30
+#define ICN8505_PROG_REG_ADDR_WIDTH	24
+
+#define MAX_FW_UPLOAD_TRIES		3
+
+struct icn8505_touch {
+	u8 slot;
+	u8 x[2];
+	u8 y[2];
+	u8 pressure;	/* Seems more like finger width then pressure really */
+	u8 event;
+/* The difference between 2 and 3 is unclear */
+#define ICN8505_EVENT_NO_DATA	1 /* No finger seen yet since wakeup */
+#define ICN8505_EVENT_UPDATE1	2 /* New or updated coordinates */
+#define ICN8505_EVENT_UPDATE2	3 /* New or updated coordinates */
+#define ICN8505_EVENT_END	4 /* Finger lifted */
+} __packed;
+
+struct icn8505_touch_data {
+	u8 softbutton;
+	u8 touch_count;
+	struct icn8505_touch touches[ICN8505_MAX_TOUCHES];
+} __packed;
+
+struct icn8505_data {
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct gpio_desc *wake_gpio;
+	struct touchscreen_properties prop;
+	char firmware_name[32];
+};
+
+static int icn8505_read_xfer(struct i2c_client *client, u16 i2c_addr,
+			     int reg_addr, int reg_addr_width,
+			     void *data, int len, bool silent)
+{
+	u8 buf[3];
+	int i, ret;
+	struct i2c_msg msg[2] = {
+		{
+			.addr = i2c_addr,
+			.buf = buf,
+			.len = reg_addr_width / 8,
+		},
+		{
+			.addr = i2c_addr,
+			.flags = I2C_M_RD,
+			.buf = data,
+			.len = len,
+		}
+	};
+
+	for (i = 0; i < (reg_addr_width / 8); i++)
+		buf[i] = (reg_addr >> (reg_addr_width - (i + 1) * 8)) & 0xff;
+
+	ret = i2c_transfer(client->adapter, msg, 2);
+	if (ret != ARRAY_SIZE(msg)) {
+		if (ret >= 0)
+			ret = -EIO;
+		if (!silent)
+			dev_err(&client->dev,
+				"Error reading addr %#x reg %#x: %d\n",
+				i2c_addr, reg_addr, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int icn8505_write_xfer(struct i2c_client *client, u16 i2c_addr,
+			      int reg_addr, int reg_addr_width,
+			      const void *data, int len, bool silent)
+{
+	u8 buf[3 + 32]; /* 3 bytes for 24 bit reg-addr + 32 bytes max len */
+	int i, ret;
+	struct i2c_msg msg = {
+		.addr = i2c_addr,
+		.buf = buf,
+		.len = reg_addr_width / 8 + len,
+	};
+
+	if (WARN_ON(len > 32))
+		return -EINVAL;
+
+	for (i = 0; i < (reg_addr_width / 8); i++)
+		buf[i] = (reg_addr >> (reg_addr_width - (i + 1) * 8)) & 0xff;
+
+	memcpy(buf + reg_addr_width / 8, data, len);
+
+	ret = i2c_transfer(client->adapter, &msg, 1);
+	if (ret != 1) {
+		if (ret >= 0)
+			ret = -EIO;
+		if (!silent)
+			dev_err(&client->dev,
+				"Error writing addr %#x reg %#x: %d\n",
+				i2c_addr, reg_addr, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int icn8505_read_data(struct icn8505_data *icn8505, int reg,
+			     void *buf, int len)
+{
+	return icn8505_read_xfer(icn8505->client, icn8505->client->addr, reg,
+				 ICN8505_REG_ADDR_WIDTH, buf, len, false);
+}
+
+static int icn8505_read_reg_silent(struct icn8505_data *icn8505, int reg)
+{
+	u8 buf;
+	int error;
+
+	error = icn8505_read_xfer(icn8505->client, icn8505->client->addr, reg,
+				  ICN8505_REG_ADDR_WIDTH, &buf, 1, true);
+	if (error)
+		return error;
+
+	return buf;
+}
+
+static int icn8505_write_reg(struct icn8505_data *icn8505, int reg, u8 val)
+{
+	return icn8505_write_xfer(icn8505->client, icn8505->client->addr, reg,
+				  ICN8505_REG_ADDR_WIDTH, &val, 1, false);
+}
+
+static int icn8505_read_prog_data(struct icn8505_data *icn8505, int reg,
+				  void *buf, int len)
+{
+	return icn8505_read_xfer(icn8505->client, ICN8505_PROG_I2C_ADDR, reg,
+				 ICN8505_PROG_REG_ADDR_WIDTH, buf, len, false);
+}
+
+static int icn8505_write_prog_data(struct icn8505_data *icn8505, int reg,
+				   const void *buf, int len)
+{
+	return icn8505_write_xfer(icn8505->client, ICN8505_PROG_I2C_ADDR, reg,
+				  ICN8505_PROG_REG_ADDR_WIDTH, buf, len, false);
+}
+
+static int icn8505_write_prog_reg(struct icn8505_data *icn8505, int reg, u8 val)
+{
+	return icn8505_write_xfer(icn8505->client, ICN8505_PROG_I2C_ADDR, reg,
+				  ICN8505_PROG_REG_ADDR_WIDTH, &val, 1, false);
+}
+
+/*
+ * Note this function uses a number of magic register addresses and values,
+ * there are deliberately no defines for these because the algorithm is taken
+ * from the icn85xx Android driver and I do not want to make up possibly wrong
+ * names for the addresses and/or values.
+ */
+static int icn8505_try_fw_upload(struct icn8505_data *icn8505,
+				 const struct firmware *fw)
+{
+	struct device *dev = &icn8505->client->dev;
+	size_t offset, count;
+	int error;
+	u8 buf[4];
+	u32 crc;
+
+	/* Put the controller in programming mode */
+	error = icn8505_write_prog_reg(icn8505, 0xcc3355, 0x5a);
+	if (error)
+		return error;
+
+	usleep_range(2000, 5000);
+
+	error = icn8505_write_prog_reg(icn8505, 0x040400, 0x01);
+	if (error)
+		return error;
+
+	usleep_range(2000, 5000);
+
+	error = icn8505_read_prog_data(icn8505, 0x040002, buf, 1);
+	if (error)
+		return error;
+
+	if (buf[0] != 0x85) {
+		dev_err(dev, "Failed to enter programming mode\n");
+		return -ENODEV;
+	}
+
+	usleep_range(1000, 5000);
+
+	/* Enable CRC mode */
+	error = icn8505_write_prog_reg(icn8505, 0x40028, 1);
+	if (error)
+		return error;
+
+	/* Send the firmware to SRAM */
+	for (offset = 0; offset < fw->size; offset += count) {
+		count = min_t(size_t, fw->size - offset, 32);
+		error = icn8505_write_prog_data(icn8505, offset,
+					      fw->data + offset, count);
+		if (error)
+			return error;
+	}
+
+	/* Disable CRC mode */
+	error = icn8505_write_prog_reg(icn8505, 0x40028, 0);
+	if (error)
+		return error;
+
+	/* Get and check length and CRC */
+	error = icn8505_read_prog_data(icn8505, 0x40034, buf, 2);
+	if (error)
+		return error;
+
+	if (get_unaligned_le16(buf) != fw->size) {
+		dev_warn(dev, "Length mismatch after uploading fw\n");
+		return -EIO;
+	}
+
+	error = icn8505_read_prog_data(icn8505, 0x4002c, buf, 4);
+	if (error)
+		return error;
+
+	crc = crc32_be(0, fw->data, fw->size);
+	if (get_unaligned_le32(buf) != crc) {
+		dev_warn(dev, "CRC mismatch after uploading fw\n");
+		return -EIO;
+	}
+
+	/* Boot controller from SRAM */
+	error = icn8505_write_prog_reg(icn8505, 0x40400, 0x03);
+	if (error)
+		return error;
+
+	usleep_range(2000, 5000);
+	return 0;
+}
+
+static int icn8505_upload_fw(struct icn8505_data *icn8505)
+{
+	struct device *dev = &icn8505->client->dev;
+	const struct firmware *fw;
+	int i, error;
+
+	/*
+	 * Always load the firmware, even if we don't need it at boot, we
+	 * we may need it at resume. Having loaded it once will make the
+	 * firmware class code cache it at suspend/resume.
+	 */
+	error = request_firmware(&fw, icn8505->firmware_name, dev);
+	if (error) {
+		dev_err(dev, "Firmware request error %d\n", error);
+		return error;
+	}
+
+	/* Check if the controller is not already up and running */
+	if (icn8505_read_reg_silent(icn8505, 0x000a) == 0x85)
+		goto success;
+
+	for (i = 1; i <= MAX_FW_UPLOAD_TRIES; i++) {
+		error = icn8505_try_fw_upload(icn8505, fw);
+		if (!error)
+			goto success;
+
+		dev_err(dev, "Failed to upload firmware: %d (attempt %d/%d)\n",
+			error, i, MAX_FW_UPLOAD_TRIES);
+		usleep_range(2000, 5000);
+	}
+
+success:
+	release_firmware(fw);
+	return error;
+}
+
+static bool icn8505_touch_active(u8 event)
+{
+	return event == ICN8505_EVENT_UPDATE1 ||
+	       event == ICN8505_EVENT_UPDATE2;
+}
+
+static irqreturn_t icn8505_irq(int irq, void *dev_id)
+{
+	struct icn8505_data *icn8505 = dev_id;
+	struct device *dev = &icn8505->client->dev;
+	struct icn8505_touch_data touch_data;
+	int i, error;
+
+	error = icn8505_read_data(icn8505, ICN8505_REG_TOUCHDATA,
+				  &touch_data, sizeof(touch_data));
+	if (error) {
+		dev_err(dev, "Error reading touch data: %d\n", error);
+		return IRQ_HANDLED;
+	}
+
+	if (touch_data.touch_count > ICN8505_MAX_TOUCHES) {
+		dev_warn(dev, "Too many touches %d > %d\n",
+			 touch_data.touch_count, ICN8505_MAX_TOUCHES);
+		touch_data.touch_count = ICN8505_MAX_TOUCHES;
+	}
+
+	for (i = 0; i < touch_data.touch_count; i++) {
+		struct icn8505_touch *touch = &touch_data.touches[i];
+		bool act = icn8505_touch_active(touch->event);
+
+		input_mt_slot(icn8505->input, touch->slot);
+		input_mt_report_slot_state(icn8505->input, MT_TOOL_FINGER, act);
+		if (!act)
+			continue;
+
+		touchscreen_report_pos(icn8505->input, &icn8505->prop,
+				       get_unaligned_le16(touch->x),
+				       get_unaligned_le16(touch->y),
+				       true);
+	}
+
+	input_mt_sync_frame(icn8505->input);
+	input_report_key(icn8505->input, KEY_LEFTMETA,
+			 touch_data.softbutton == 1);
+	input_sync(icn8505->input);
+
+	return IRQ_HANDLED;
+}
+
+static int icn8505_probe_acpi(struct icn8505_data *icn8505, struct device *dev)
+{
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	const char *subsys = "unknown";
+	struct acpi_device *adev;
+	union acpi_object *obj;
+	acpi_status status;
+
+	adev = ACPI_COMPANION(dev);
+	if (!adev)
+		return -ENODEV;
+
+	status = acpi_evaluate_object(adev->handle, "_SUB", NULL, &buffer);
+	if (ACPI_SUCCESS(status)) {
+		obj = buffer.pointer;
+		if (obj->type == ACPI_TYPE_STRING)
+			subsys = obj->string.pointer;
+		else
+			dev_warn(dev, "Warning ACPI _SUB did not return a string\n");
+	} else {
+		dev_warn(dev, "Warning ACPI _SUB failed: %#x\n", status);
+		buffer.pointer = NULL;
+	}
+
+	snprintf(icn8505->firmware_name, sizeof(icn8505->firmware_name),
+		 "chipone/icn8505-%s.fw", subsys);
+
+	kfree(buffer.pointer);
+	return 0;
+}
+
+static int icn8505_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct icn8505_data *icn8505;
+	struct input_dev *input;
+	__le16 resolution[2];
+	int error;
+
+	if (!client->irq) {
+		dev_err(dev, "No irq specified\n");
+		return -EINVAL;
+	}
+
+	icn8505 = devm_kzalloc(dev, sizeof(*icn8505), GFP_KERNEL);
+	if (!icn8505)
+		return -ENOMEM;
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+
+	input->name = client->name;
+	input->id.bustype = BUS_I2C;
+
+	input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
+	input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
+	input_set_capability(input, EV_KEY, KEY_LEFTMETA);
+
+	icn8505->client = client;
+	icn8505->input = input;
+	input_set_drvdata(input, icn8505);
+
+	error = icn8505_probe_acpi(icn8505, dev);
+	if (error)
+		return error;
+
+	error = icn8505_upload_fw(icn8505);
+	if (error)
+		return error;
+
+	error = icn8505_read_data(icn8505, ICN8505_REG_CONFIGDATA,
+				resolution, sizeof(resolution));
+	if (error) {
+		dev_err(dev, "Error reading resolution: %d\n", error);
+		return error;
+	}
+
+	input_set_abs_params(input, ABS_MT_POSITION_X, 0,
+			     le16_to_cpu(resolution[0]) - 1, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
+			     le16_to_cpu(resolution[1]) - 1, 0, 0);
+
+	touchscreen_parse_properties(input, true, &icn8505->prop);
+	if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
+	    !input_abs_get_max(input, ABS_MT_POSITION_Y)) {
+		dev_err(dev, "Error touchscreen-size-x and/or -y missing\n");
+		return -EINVAL;
+	}
+
+	error = input_mt_init_slots(input, ICN8505_MAX_TOUCHES,
+				  INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+	if (error)
+		return error;
+
+	error = devm_request_threaded_irq(dev, client->irq, NULL, icn8505_irq,
+					IRQF_ONESHOT, client->name, icn8505);
+	if (error) {
+		dev_err(dev, "Error requesting irq: %d\n", error);
+		return error;
+	}
+
+	error = input_register_device(input);
+	if (error)
+		return error;
+
+	i2c_set_clientdata(client, icn8505);
+	return 0;
+}
+
+static int __maybe_unused icn8505_suspend(struct device *dev)
+{
+	struct icn8505_data *icn8505 = i2c_get_clientdata(to_i2c_client(dev));
+
+	disable_irq(icn8505->client->irq);
+
+	icn8505_write_reg(icn8505, ICN8505_REG_POWER, ICN8505_POWER_HIBERNATE);
+
+	return 0;
+}
+
+static int __maybe_unused icn8505_resume(struct device *dev)
+{
+	struct icn8505_data *icn8505 = i2c_get_clientdata(to_i2c_client(dev));
+	int error;
+
+	error = icn8505_upload_fw(icn8505);
+	if (error)
+		return error;
+
+	enable_irq(icn8505->client->irq);
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(icn8505_pm_ops, icn8505_suspend, icn8505_resume);
+
+static const struct acpi_device_id icn8505_acpi_match[] = {
+	{ "CHPN0001" },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, icn8505_acpi_match);
+
+static struct i2c_driver icn8505_driver = {
+	.driver = {
+		.name	= "chipone_icn8505",
+		.pm	= &icn8505_pm_ops,
+		.acpi_match_table = icn8505_acpi_match,
+	},
+	.probe_new = icn8505_probe,
+};
+
+module_i2c_driver(icn8505_driver);
+
+MODULE_DESCRIPTION("ChipOne icn8505 I2C Touchscreen Driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL");

drivers/input/touchscreen/goodix.c

@@ -933,6 +933,7 @@ MODULE_DEVICE_TABLE(i2c, goodix_ts_id);
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id goodix_acpi_match[] = {
 	{ "GDIX1001", 0 },
+	{ "GDIX1002", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, goodix_acpi_match);

drivers/input/touchscreen/mk712.c

@@ -17,7 +17,7 @@
  * found in Gateway AOL Connected Touchpad computers.
  *
  * Documentation for ICS MK712 can be found at:
- *	http://www.idt.com/products/getDoc.cfm?docID=18713923
+ *	https://www.idt.com/general-parts/mk712-touch-screen-controller
  */
 
 /*

drivers/input/touchscreen/ti_am335x_tsc.c

@@ -34,6 +34,8 @@
 #define SEQ_SETTLE		275
 #define MAX_12BIT		((1 << 12) - 1)
 
+#define TSC_IRQENB_MASK		(IRQENB_FIFO0THRES | IRQENB_EOS | IRQENB_HW_PEN)
+
 static const int config_pins[] = {
 	STEPCONFIG_XPP,
 	STEPCONFIG_XNN,
@@ -274,6 +276,7 @@ static irqreturn_t titsc_irq(int irq, void *dev)
 	if (status & IRQENB_HW_PEN) {
 		ts_dev->pen_down = true;
 		irqclr |= IRQENB_HW_PEN;
+		pm_stay_awake(ts_dev->mfd_tscadc->dev);
 	}
 
 	if (status & IRQENB_PENUP) {
@@ -283,6 +286,7 @@ static irqreturn_t titsc_irq(int irq, void *dev)
 			input_report_key(input_dev, BTN_TOUCH, 0);
 			input_report_abs(input_dev, ABS_PRESSURE, 0);
 			input_sync(input_dev);
+			pm_relax(ts_dev->mfd_tscadc->dev);
 		} else {
 			ts_dev->pen_down = true;
 		}
@@ -432,6 +436,7 @@ static int titsc_probe(struct platform_device *pdev)
 		goto err_free_mem;
 	}
 
+	titsc_writel(ts_dev, REG_IRQSTATUS, TSC_IRQENB_MASK);
 	titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);
 	titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_EOS);
 	err = titsc_config_wires(ts_dev);
@@ -495,6 +500,7 @@ static int __maybe_unused titsc_suspend(struct device *dev)
 
 	tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
 	if (device_may_wakeup(tscadc_dev->dev)) {
+		titsc_writel(ts_dev, REG_IRQSTATUS, TSC_IRQENB_MASK);
 		idle = titsc_readl(ts_dev, REG_IRQENABLE);
 		titsc_writel(ts_dev, REG_IRQENABLE,
 				(idle | IRQENB_HW_PEN));
@@ -513,6 +519,7 @@ static int __maybe_unused titsc_resume(struct device *dev)
 		titsc_writel(ts_dev, REG_IRQWAKEUP,
 				0x00);
 		titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN);
+		pm_relax(ts_dev->mfd_tscadc->dev);
 	}
 	titsc_step_config(ts_dev);
 	titsc_writel(ts_dev, REG_FIFO0THR,

drivers/input/touchscreen/usbtouchscreen.c

@@ -440,6 +440,8 @@ static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 #define MTOUCHUSB_RESET                 7
 #define MTOUCHUSB_REQ_CTRLLR_ID         10
 
+#define MTOUCHUSB_REQ_CTRLLR_ID_LEN	16
+
 static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
 	if (hwcalib_xy) {
@@ -454,11 +456,93 @@ static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 	return 1;
 }
 
+struct mtouch_priv {
+	u8 fw_rev_major;
+	u8 fw_rev_minor;
+};
+
+static ssize_t mtouch_firmware_rev_show(struct device *dev,
+				struct device_attribute *attr, char *output)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
+	struct mtouch_priv *priv = usbtouch->priv;
+
+	return scnprintf(output, PAGE_SIZE, "%1x.%1x\n",
+			 priv->fw_rev_major, priv->fw_rev_minor);
+}
+static DEVICE_ATTR(firmware_rev, 0444, mtouch_firmware_rev_show, NULL);
+
+static struct attribute *mtouch_attrs[] = {
+	&dev_attr_firmware_rev.attr,
+	NULL
+};
+
+static const struct attribute_group mtouch_attr_group = {
+	.attrs = mtouch_attrs,
+};
+
+static int mtouch_get_fw_revision(struct usbtouch_usb *usbtouch)
+{
+	struct usb_device *udev = interface_to_usbdev(usbtouch->interface);
+	struct mtouch_priv *priv = usbtouch->priv;
+	u8 *buf;
+	int ret;
+
+	buf = kzalloc(MTOUCHUSB_REQ_CTRLLR_ID_LEN, GFP_NOIO);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+			      MTOUCHUSB_REQ_CTRLLR_ID,
+			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      0, 0, buf, MTOUCHUSB_REQ_CTRLLR_ID_LEN,
+			      USB_CTRL_SET_TIMEOUT);
+	if (ret != MTOUCHUSB_REQ_CTRLLR_ID_LEN) {
+		dev_warn(&usbtouch->interface->dev,
+			 "Failed to read FW rev: %d\n", ret);
+		ret = ret < 0 ? ret : -EIO;
+		goto free;
+	}
+
+	priv->fw_rev_major = buf[3];
+	priv->fw_rev_minor = buf[4];
+
+	ret = 0;
+
+free:
+	kfree(buf);
+	return ret;
+}
+
+static int mtouch_alloc(struct usbtouch_usb *usbtouch)
+{
+	int ret;
+
+	usbtouch->priv = kmalloc(sizeof(struct mtouch_priv), GFP_KERNEL);
+	if (!usbtouch->priv)
+		return -ENOMEM;
+
+	ret = sysfs_create_group(&usbtouch->interface->dev.kobj,
+				 &mtouch_attr_group);
+	if (ret) {
+		kfree(usbtouch->priv);
+		usbtouch->priv = NULL;
+		return ret;
+	}
+
+	return 0;
+}
+
 static int mtouch_init(struct usbtouch_usb *usbtouch)
 {
 	int ret, i;
 	struct usb_device *udev = interface_to_usbdev(usbtouch->interface);
 
+	ret = mtouch_get_fw_revision(usbtouch);
+	if (ret)
+		return ret;
+
 	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 	                      MTOUCHUSB_RESET,
 	                      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
@@ -492,6 +576,14 @@ static int mtouch_init(struct usbtouch_usb *usbtouch)
 
 	return 0;
 }
+
+static void mtouch_exit(struct usbtouch_usb *usbtouch)
+{
+	struct mtouch_priv *priv = usbtouch->priv;
+
+	sysfs_remove_group(&usbtouch->interface->dev.kobj, &mtouch_attr_group);
+	kfree(priv);
+}
 #endif
 
 
@@ -1119,7 +1211,9 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
 		.max_yc		= 0x4000,
 		.rept_size	= 11,
 		.read_data	= mtouch_read_data,
+		.alloc		= mtouch_alloc,
 		.init		= mtouch_init,
+		.exit		= mtouch_exit,
 	},
 #endif
 

drivers/mfd/cros_ec.c

@@ -229,7 +229,7 @@ int cros_ec_suspend(struct cros_ec_device *ec_dev)
 }
 EXPORT_SYMBOL(cros_ec_suspend);
 
-static void cros_ec_drain_events(struct cros_ec_device *ec_dev)
+static void cros_ec_report_events_during_suspend(struct cros_ec_device *ec_dev)
 {
 	while (cros_ec_get_next_event(ec_dev, NULL) > 0)
 		blocking_notifier_call_chain(&ec_dev->event_notifier,
@@ -253,21 +253,16 @@ int cros_ec_resume(struct cros_ec_device *ec_dev)
 		dev_dbg(ec_dev->dev, "Error %d sending resume event to ec",
 			ret);
 
-	/*
-	 * In some cases, we need to distinguish between events that occur
-	 * during suspend if the EC is not a wake source. For example,
-	 * keypresses during suspend should be discarded if it does not wake
-	 * the system.
-	 *
-	 * If the EC is not a wake source, drain the event queue and mark them
-	 * as "queued during suspend".
-	 */
 	if (ec_dev->wake_enabled) {
 		disable_irq_wake(ec_dev->irq);
 		ec_dev->wake_enabled = 0;
-	} else {
-		cros_ec_drain_events(ec_dev);
 	}
+	/*
+	 * Let the mfd devices know about events that occur during
+	 * suspend. This way the clients know what to do with them.
+	 */
+	cros_ec_report_events_during_suspend(ec_dev);
+
 
 	return 0;
 }