perf: Remove dev_err() usage after platform_get_irq()

We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

// <smpl>
@@
expression ret;
struct platform_device *E;
@@

ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);

if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>

While we're here, remove braces on if statements that only have one
statement (manually).

Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Will Deacon <will@kernel.org>

drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c

@@ -217,10 +217,8 @@ static int hisi_ddrc_pmu_init_irq(struct hisi_pmu *ddrc_pmu,
 
 	/* Read and init IRQ */
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "DDRC PMU get irq fail; irq:%d\n", irq);
+	if (irq < 0)
 		return irq;
-	}
 
 	ret = devm_request_irq(&pdev->dev, irq, hisi_ddrc_pmu_isr,
 			       IRQF_NOBALANCING | IRQF_NO_THREAD,

drivers/perf/hisilicon/hisi_uncore_hha_pmu.c

@@ -207,10 +207,8 @@ static int hisi_hha_pmu_init_irq(struct hisi_pmu *hha_pmu,
 
 	/* Read and init IRQ */
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "HHA PMU get irq fail; irq:%d\n", irq);
+	if (irq < 0)
 		return irq;
-	}
 
 	ret = devm_request_irq(&pdev->dev, irq, hisi_hha_pmu_isr,
 			      IRQF_NOBALANCING | IRQF_NO_THREAD,

drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c

@@ -206,10 +206,8 @@ static int hisi_l3c_pmu_init_irq(struct hisi_pmu *l3c_pmu,
 
 	/* Read and init IRQ */
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "L3C PMU get irq fail; irq:%d\n", irq);
+	if (irq < 0)
 		return irq;
-	}
 
 	ret = devm_request_irq(&pdev->dev, irq, hisi_l3c_pmu_isr,
 			       IRQF_NOBALANCING | IRQF_NO_THREAD,

drivers/perf/qcom_l2_pmu.c

@@ -909,12 +909,8 @@ static int l2_cache_pmu_probe_cluster(struct device *dev, void *data)
 	cluster->cluster_id = fw_cluster_id;
 
 	irq = platform_get_irq(sdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev,
-			"Failed to get valid irq for cluster %ld\n",
-			fw_cluster_id);
+	if (irq < 0)
 		return irq;
-	}
 	irq_set_status_flags(irq, IRQ_NOAUTOEN);
 	cluster->irq = irq;
 

drivers/perf/xgene_pmu.c

@@ -1901,10 +1901,8 @@ static int xgene_pmu_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "No IRQ resource\n");
+	if (irq < 0)
 		return -EINVAL;
-	}
 
 	rc = devm_request_irq(&pdev->dev, irq, xgene_pmu_isr,
 				IRQF_NOBALANCING | IRQF_NO_THREAD,