Skip to content

L
linux
Commit 2338c76a authored by Kishon Vijay Abraham I's avatar Kishon Vijay Abraham I Committed by Tony Lindgren
Browse files
Options

ARM: dts: am4372/dra7/omap5: Use "syscon-phy-power" instead of "ctrl-module" 

Add "syscon-phy-power" property and remove the deprecated "ctrl-module"
property from SATA and USB PHY node. Also remove the unused control
module dt nodes.
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 4b4f52ed
Show whitespace changes
Inline Side-by-side
Showing with 9 additions and 67 deletions
arch/arm/boot/dts/am4372.dtsi
View file @ 2338c76a
......@@ -896,18 +896,6 @@ gpmc: gpmc@50000000 {
status = "disabled";
};
am43xx_control_usb2phy1: control-phy@44e10620 {
compatible = "ti,control-phy-usb2-am437";
reg = <0x44e10620 0x4>;
reg-names = "power";
};
am43xx_control_usb2phy2: control-phy@0x44e10628 {
compatible = "ti,control-phy-usb2-am437";
reg = <0x44e10628 0x4>;
reg-names = "power";
};
ocp2scp0: ocp2scp@483a8000 {
compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
#address-cells = <1>;
......@@ -918,7 +906,7 @@ ocp2scp0: ocp2scp@483a8000 {
usb2_phy1: phy@483a8000 {
compatible = "ti,am437x-usb2";
reg = <0x483a8000 0x8000>;
ctrl-module = <&am43xx_control_usb2phy1>;
syscon-phy-power = <&scm_conf 0x620>;
clocks = <&usb_phy0_always_on_clk32k>,
<&usb_otg_ss0_refclk960m>;
clock-names = "wkupclk", "refclk";
......@@ -937,7 +925,7 @@ ocp2scp1: ocp2scp@483e8000 {
usb2_phy2: phy@483e8000 {
compatible = "ti,am437x-usb2";
reg = <0x483e8000 0x8000>;
ctrl-module = <&am43xx_control_usb2phy2>;
syscon-phy-power = <&scm_conf 0x628>;
clocks = <&usb_phy1_always_on_clk32k>,
<&usb_otg_ss1_refclk960m>;
clock-names = "wkupclk", "refclk";
......
arch/arm/boot/dts/dra7.dtsi
View file @ 2338c76a
......@@ -1173,14 +1173,6 @@ qspi: qspi@4b300000 {
status = "disabled";
};
omap_control_sata: control-phy@4a002374 {
compatible = "ti,control-phy-pipe3";
reg = <0x4a002374 0x4>;
reg-names = "power";
clocks = <&sys_clkin1>;
clock-names = "sysclk";
};
/* OCP2SCP3 */
ocp2scp@4a090000 {
compatible = "ti,omap-ocp2scp";
......@@ -1195,7 +1187,7 @@ sata_phy: phy@4A096000 {
<0x4A096400 0x64>, /* phy_tx */
<0x4A096800 0x40>; /* pll_ctrl */
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
ctrl-module = <&omap_control_sata>;
syscon-phy-power = <&scm_conf 0x374>;
clocks = <&sys_clkin1>, <&sata_ref_clk>;
clock-names = "sysclk", "refclk";
syscon-pllreset = <&scm_conf 0x3fc>;
......@@ -1263,24 +1255,6 @@ rtc: rtc@48838000 {
clocks = <&sys_32k_ck>;
};
omap_control_usb2phy1: control-phy@4a002300 {
compatible = "ti,control-phy-usb2";
reg = <0x4a002300 0x4>;
reg-names = "power";
};
omap_control_usb3phy1: control-phy@4a002370 {
compatible = "ti,control-phy-pipe3";
reg = <0x4a002370 0x4>;
reg-names = "power";
};
omap_control_usb2phy2: control-phy@0x4a002e74 {
compatible = "ti,control-phy-usb2-dra7";
reg = <0x4a002e74 0x4>;
reg-names = "power";
};
/* OCP2SCP1 */
ocp2scp@4a080000 {
compatible = "ti,omap-ocp2scp";
......@@ -1293,7 +1267,7 @@ ocp2scp@4a080000 {
usb2_phy1: phy@4a084000 {
compatible = "ti,omap-usb2";
reg = <0x4a084000 0x400>;
ctrl-module = <&omap_control_usb2phy1>;
syscon-phy-power = <&scm_conf 0x300>;
clocks = <&usb_phy1_always_on_clk32k>,
<&usb_otg_ss1_refclk960m>;
clock-names = "wkupclk",
......@@ -1305,7 +1279,7 @@ usb2_phy2: phy@4a085000 {
compatible = "ti,dra7x-usb2-phy2",
"ti,omap-usb2";
reg = <0x4a085000 0x400>;
ctrl-module = <&omap_control_usb2phy2>;
syscon-phy-power = <&scm_conf 0xe74>;
clocks = <&usb_phy2_always_on_clk32k>,
<&usb_otg_ss2_refclk960m>;
clock-names = "wkupclk",
......@@ -1319,7 +1293,7 @@ usb3_phy1: phy@4a084400 {
<0x4a084800 0x64>,
<0x4a084c00 0x40>;
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
ctrl-module = <&omap_control_usb3phy1>;
syscon-phy-power = <&scm_conf 0x370>;
clocks = <&usb_phy3_always_on_clk32k>,
<&sys_clkin1>,
<&usb_otg_ss1_refclk960m>;
......
arch/arm/boot/dts/omap5.dtsi
View file @ 2338c76a
......@@ -852,18 +852,6 @@ emif2: emif@4d000000 {
hw-caps-temp-alert;
};
omap_control_usb2phy: control-phy@4a002300 {
compatible = "ti,control-phy-usb2";
reg = <0x4a002300 0x4>;
reg-names = "power";
};
omap_control_usb3phy: control-phy@4a002370 {
compatible = "ti,control-phy-pipe3";
reg = <0x4a002370 0x4>;
reg-names = "power";
};
usb3: omap_dwc3@4a020000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss";
......@@ -899,7 +887,7 @@ ocp2scp@4a080000 {
usb2_phy: usb2phy@4a084000 {
compatible = "ti,omap-usb2";
reg = <0x4a084000 0x7c>;
ctrl-module = <&omap_control_usb2phy>;
syscon-phy-power = <&scm_conf 0x300>;
clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
clock-names = "wkupclk", "refclk";
#phy-cells = <0>;
......@@ -911,7 +899,7 @@ usb3_phy: usb3phy@4a084400 {
<0x4a084800 0x64>,
<0x4a084c00 0x40>;
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
ctrl-module = <&omap_control_usb3phy>;
syscon-phy-power = <&scm_conf 0x370>;
clocks = <&usb_phy_cm_clk32k>,
<&sys_clkin>,
<&usb_otg_ss_refclk960m>;
......@@ -967,14 +955,6 @@ bandgap: bandgap@4a0021e0 {
#thermal-sensor-cells = <1>;
};
omap_control_sata: control-phy@4a002374 {
compatible = "ti,control-phy-pipe3";
reg = <0x4a002374 0x4>;
reg-names = "power";
clocks = <&sys_clkin>;
clock-names = "sysclk";
};
/* OCP2SCP3 */
ocp2scp@4a090000 {
compatible = "ti,omap-ocp2scp";
......@@ -989,7 +969,7 @@ sata_phy: phy@4a096000 {
<0x4A096400 0x64>, /* phy_tx */
<0x4A096800 0x40>; /* pll_ctrl */
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
ctrl-module = <&omap_control_sata>;
syscon-phy-power = <&scm_conf 0x374>;
clocks = <&sys_clkin>, <&sata_ref_clk>;
clock-names = "sysclk", "refclk";
#phy-cells = <0>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7