Merge tetrachloride.(none):/mnt/raid/src/kernel/2.5/bk-linus

into tetrachloride.(none):/mnt/raid/src/kernel/2.5/cpufreq

Documentation/cpu-freq/user-guide.txt

@@ -21,6 +21,8 @@ Contents:
 1.1 ARM
 1.2 x86
 1.3 sparc64
+1.4 ppc
+1.5 SuperH
 
 2. "Policy" / "Governor"?
 2.1 Policy
@@ -77,6 +79,20 @@ cpufreq:
 UltraSPARC-III
 
 
+1.4 ppc
+-------
+
+Several "PowerBook" and "iBook2" notebooks are supported.
+
+
+1.5 SuperH
+----------
+
+The following SuperH processors are supported by cpufreq:
+
+SH-3
+SH-4
+
 
 2. "Policy" / "Governor" ?
 ==========================

drivers/cpufreq/Makefile

-#CPUfreq governors and cross-arch helpers
+# CPUfreq governors 
+obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE)	+= userspace.o
+
+# CPUfreq cross-arch helpers
 obj-$(CONFIG_CPU_FREQ_TABLE)		+= freq_table.o
 obj-$(CONFIG_CPU_FREQ_PROC_INTF)	+= proc_intf.o
-obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE)	+= userspace.o
+

drivers/cpufreq/proc_intf.c

@@ -13,6 +13,8 @@
 #include <asm/uaccess.h>
 
 
+#define CPUFREQ_ALL_CPUS		((NR_CPUS))
+
 /**
  * cpufreq_parse_policy - parse a policy string
  * @input_string: the string to parse.

include/linux/cpufreq.h

@@ -20,6 +20,7 @@
 #include <linux/device.h>
 #include <linux/kobject.h>
 #include <linux/sysfs.h>
+#include <linux/completion.h>
 
 #define CPUFREQ_NAME_LEN 16
 
@@ -34,8 +35,6 @@ int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list);
 #define CPUFREQ_TRANSITION_NOTIFIER	(0)
 #define CPUFREQ_POLICY_NOTIFIER		(1)
 
-#define CPUFREQ_ALL_CPUS        ((NR_CPUS))
-
 
 /********************** cpufreq policy notifiers *********************/
 
@@ -56,21 +55,25 @@ struct cpufreq_governor;
 struct cpufreq_cpuinfo {
 	unsigned int		max_freq;
 	unsigned int		min_freq;
-	unsigned int            transition_latency;
+	unsigned int		transition_latency; /* in 10^(-9) s */
 };
 
 struct cpufreq_policy {
-	unsigned int            cpu;    /* cpu nr or CPUFREQ_ALL_CPUS */
+	unsigned int		cpu;    /* cpu nr */
+	struct cpufreq_cpuinfo	cpuinfo;/* see above */
+
 	unsigned int		min;    /* in kHz */
 	unsigned int		max;    /* in kHz */
 	unsigned int		cur;    /* in kHz, only needed if cpufreq
 					 * governors are used */
         unsigned int		policy; /* see above */
 	struct cpufreq_governor	*governor; /* see below */
-	struct cpufreq_cpuinfo  cpuinfo;     /* see above */
-	struct kobject		kobj;
+
  	struct semaphore	lock;   /* CPU ->setpolicy or ->target may
 					   only be called once a time */
+
+	struct kobject		kobj;
+	struct completion	kobj_unregister;
 };
 
 #define CPUFREQ_ADJUST		(0)
@@ -84,7 +87,7 @@ struct cpufreq_policy {
 #define CPUFREQ_POSTCHANGE	(1)
 
 struct cpufreq_freqs {
-	unsigned int cpu;      /* cpu nr or CPUFREQ_ALL_CPUS */
+	unsigned int cpu;	/* cpu nr */
 	unsigned int old;
 	unsigned int new;
 };
@@ -154,18 +157,22 @@ void cpufreq_unregister_governor(struct cpufreq_governor *governor);
 struct freq_attr;
 
 struct cpufreq_driver {
+	struct module           *owner;
+	char			name[CPUFREQ_NAME_LEN];
+
+	struct cpufreq_policy	*policy;
+
 	/* needed by all drivers */
+	int	(*init)		(struct cpufreq_policy *policy);
 	int	(*verify)	(struct cpufreq_policy *policy);
-	struct cpufreq_policy	*policy;
-	char			name[CPUFREQ_NAME_LEN];
+
 	/* define one out of two */
 	int	(*setpolicy)	(struct cpufreq_policy *policy);
 	int	(*target)	(struct cpufreq_policy *policy,
 				 unsigned int target_freq,
 				 unsigned int relation);
-	struct module           *owner;
-	/* optional, for the moment */
-	int	(*init)		(struct cpufreq_policy *policy);
+
+	/* optional */
 	int	(*exit)		(struct cpufreq_policy *policy);
 	struct freq_attr	**attr;
 };
@@ -306,8 +313,4 @@ void cpufreq_frequency_table_put_attr(unsigned int cpu);
 
 
 #endif /* CONFIG_CPU_FREQ_TABLE */
-
-/* Currently exported only for the proc interface, remove when that goes */
-extern struct cpufreq_driver *cpufreq_driver;
-
 #endif /* _LINUX_CPUFREQ_H */

kernel/cpufreq.c

@@ -23,6 +23,7 @@
 #include <linux/device.h>
 #include <linux/slab.h>
 #include <linux/cpu.h>
+#include <linux/completion.h>
 
 /**
  * The "cpufreq driver" - the arch- or hardware-dependend low
@@ -297,6 +298,12 @@ static ssize_t store(struct kobject * kobj, struct attribute * attr,
 	return ret;
 }
 
+static void cpufreq_sysfs_release(struct kobject * kobj)
+{
+	struct cpufreq_policy * policy = to_policy(kobj);
+	complete(&policy->kobj_unregister);
+}
+
 static struct sysfs_ops sysfs_ops = {
 	.show	= show,
 	.store	= store,
@@ -305,6 +312,7 @@ static struct sysfs_ops sysfs_ops = {
 static struct kobj_type ktype_cpufreq = {
 	.sysfs_ops	= &sysfs_ops,
 	.default_attrs	= default_attrs,
+	.release	= cpufreq_sysfs_release,
 };
 
 
@@ -329,11 +337,9 @@ static int cpufreq_add_dev (struct sys_device * sys_dev)
 	 */
 	policy = &cpufreq_driver->policy[cpu];
 	policy->cpu = cpu;
-	if (cpufreq_driver->init) {
 	ret = cpufreq_driver->init(policy);
 	if (ret)
 		goto out;
-	}
 
 	/* set default policy on this CPU */
 	down(&cpufreq_driver_sem);
@@ -343,6 +349,8 @@ static int cpufreq_add_dev (struct sys_device * sys_dev)
 	up(&cpufreq_driver_sem);
 
 	init_MUTEX(&policy->lock);
+	init_completion(&policy->kobj_unregister);
+
 	/* prepare interface data */
 	policy->kobj.parent = &sys_dev->kobj;
 	policy->kobj.ktype = &ktype_cpufreq;
@@ -352,18 +360,19 @@ static int cpufreq_add_dev (struct sys_device * sys_dev)
 	if (ret)
 		goto out;
 
+	/* set up files for this cpu device */
 	drv_attr = cpufreq_driver->attr;
 	while ((drv_attr) && (*drv_attr)) {
 		sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
 		drv_attr++;
 	}
-	/* set up files for this cpu device */
-
 	
 	/* set default policy */
 	ret = cpufreq_set_policy(&new_policy);
-	if (ret)
+	if (ret) {
 		kobject_unregister(&policy->kobj);
+		wait_for_completion(&policy->kobj_unregister);
+	}
 
  out:
 	module_put(cpufreq_driver->owner);
@@ -401,10 +410,39 @@ static int cpufreq_remove_dev (struct sys_device * sys_dev)
 
 	up(&cpufreq_driver_sem);
 	kobject_put(&cpufreq_driver->policy[cpu].kobj);
+
+	/* we need to make sure that the underlying kobj is actually
+	 * destroyed before we proceed e.g. with cpufreq driver module
+	 * unloading
+	 */
+	wait_for_completion(&cpufreq_driver->policy[cpu].kobj_unregister);
+
 	return 0;
 }
 
-static int cpufreq_restore(struct sys_device *);
+/**
+ *	cpufreq_restore - restore the CPU clock frequency after resume
+ *
+ *	Restore the CPU clock frequency so that our idea of the current
+ *	frequency reflects the actual hardware.
+ */
+static int cpufreq_restore(struct sys_device * sysdev)
+{
+	int cpu = sysdev->id;
+	unsigned int ret = 0;
+	struct cpufreq_policy policy;
+
+	if (cpu_online(cpu) && cpufreq_cpu_get(cpu)) {
+		down(&cpufreq_driver_sem);
+		memcpy(&policy, &cpufreq_driver->policy[cpu], 
+		       sizeof(struct cpufreq_policy));
+		up(&cpufreq_driver_sem);
+		ret = cpufreq_set_policy(&policy);
+		cpufreq_cpu_put(cpu);
+	}
+
+	return ret;
+}
 
 static struct sysdev_driver cpufreq_sysdev_driver = {
 	.add		= cpufreq_add_dev,
@@ -587,33 +625,10 @@ EXPORT_SYMBOL_GPL(cpufreq_register_governor);
 
 void cpufreq_unregister_governor(struct cpufreq_governor *governor)
 {
-	unsigned int i;
-	
 	if (!governor)
 		return;
 
 	down(&cpufreq_governor_sem);
-
-	/* 
-	 * Unless the user uses rmmod -f, we can be safe. But we never
-	 * know, so check whether if it's currently used. If so,
-	 * stop it and replace it with the default governor.
-	 */
-	for (i=0; i<NR_CPUS; i++)
-	{
-		if (!cpufreq_cpu_get(i))
-			continue;
-		if ((cpufreq_driver->policy[i].policy == CPUFREQ_POLICY_GOVERNOR) && 
-		    (cpufreq_driver->policy[i].governor == governor)) {
-			cpufreq_governor(i, CPUFREQ_GOV_STOP);
-			cpufreq_driver->policy[i].policy = CPUFREQ_POLICY_PERFORMANCE;
-			cpufreq_governor(i, CPUFREQ_GOV_START);
-			cpufreq_governor(i, CPUFREQ_GOV_LIMITS);
-		}
-		cpufreq_cpu_put(i);
-	}
-
-	/* now we can safely remove it from the list */
 	list_del(&governor->governor_list);
 	up(&cpufreq_governor_sem);
 	return;
@@ -859,37 +874,3 @@ int cpufreq_unregister_driver(struct cpufreq_driver *driver)
 	return 0;
 }
 EXPORT_SYMBOL_GPL(cpufreq_unregister_driver);
-
-
-#ifdef CONFIG_PM
-
-/**
- *	cpufreq_restore - restore the CPU clock frequency after resume
- *
- *	Restore the CPU clock frequency so that our idea of the current
- *	frequency reflects the actual hardware.
- */
-static int cpufreq_restore(struct sys_device * sysdev)
-{
-	int cpu = sysdev->id;
-	unsigned int ret = 0;
-	struct cpufreq_policy policy;
-
-	if (cpu_online(cpu) && cpufreq_cpu_get(cpu)) {
-		down(&cpufreq_driver_sem);
-		memcpy(&policy, &cpufreq_driver->policy[cpu], 
-		       sizeof(struct cpufreq_policy));
-		up(&cpufreq_driver_sem);
-		ret = cpufreq_set_policy(&policy);
-		cpufreq_cpu_put(cpu);
-	}
-
-	return ret;
-}
-
-#else
-static int cpufreq_restore(struct sys_device * sysdev)
-{
-	return 0;
-}
-#endif /* CONFIG_PM */