Merge bk://kernel.bkbits.net/jgarzik/net-drivers-2.5

into home.osdl.org:/home/torvalds/v2.5/linux

arch/ppc/kernel/entry.S

@@ -200,9 +200,6 @@ ret_from_syscall:
 	andi.	r11,r11,_TIF_FORCE_NOERROR
 	bne	30f
 	neg	r3,r3
-	cmpi	0,r3,ERESTARTNOHAND
-	bne	22f
-	li	r3,EINTR
 22:	lwz	r10,_CCR(r1)	/* Set SO bit in CR */
 	oris	r10,r10,0x1000
 	stw	r10,_CCR(r1)

arch/sparc64/defconfig

@@ -27,7 +27,7 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
+CONFIG_MODVERSIONS=y
 CONFIG_KMOD=y
 
 #
@@ -162,7 +162,9 @@ CONFIG_LOGO_SUN_CLUT224=y
 #
 CONFIG_SERIAL_SUNCORE=y
 CONFIG_SERIAL_SUNZILOG=y
+CONFIG_SERIAL_SUNZILOG_CONSOLE=y
 CONFIG_SERIAL_SUNSU=y
+CONFIG_SERIAL_SUNSU_CONSOLE=y
 CONFIG_SERIAL_SUNSAB=m
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -197,8 +199,8 @@ CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
+CONFIG_MD_RAID5=m
+CONFIG_MD_MULTIPATH=m
 CONFIG_BLK_DEV_DM=m
 # CONFIG_BLK_DEV_RAM is not set
 
@@ -243,26 +245,27 @@ CONFIG_BLK_DEV_ADMA=y
 # CONFIG_BLK_DEV_AEC62XX is not set
 CONFIG_BLK_DEV_ALI15X3=y
 # CONFIG_WDC_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLK_DEV_AMD74XX=m
+CONFIG_BLK_DEV_CMD64X=m
+CONFIG_BLK_DEV_TRIFLEX=m
+CONFIG_BLK_DEV_CY82C693=m
+CONFIG_BLK_DEV_CS5520=m
+CONFIG_BLK_DEV_HPT34X=m
+CONFIG_BLK_DEV_HPT366=m
+CONFIG_BLK_DEV_SC1200=m
+CONFIG_BLK_DEV_PIIX=m
+CONFIG_BLK_DEV_NS87415=m
+CONFIG_BLK_DEV_OPTI621=m
+CONFIG_BLK_DEV_PDC202XX_OLD=m
+CONFIG_BLK_DEV_PDC202XX_NEW=m
+CONFIG_BLK_DEV_SVWKS=m
+CONFIG_BLK_DEV_SIIMAGE=m
+CONFIG_BLK_DEV_SLC90E66=m
+CONFIG_BLK_DEV_TRM290=m
+CONFIG_BLK_DEV_VIA82CXXX=m
 CONFIG_IDEDMA_AUTO=y
 # CONFIG_IDEDMA_IVB is not set
+CONFIG_BLK_DEV_PDC202XX=y
 CONFIG_BLK_DEV_IDE_MODES=y
 
 #
@@ -408,14 +411,18 @@ CONFIG_NETFILTER=y
 CONFIG_UNIX=y
 CONFIG_NET_KEY=m
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 # CONFIG_IP_PNP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
 CONFIG_ARPD=y
 CONFIG_INET_ECN=y
-# CONFIG_SYN_COOKIES is not set
+CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
@@ -436,6 +443,7 @@ CONFIG_IP_NF_MATCH_PKTTYPE=m
 CONFIG_IP_NF_MATCH_MARK=m
 CONFIG_IP_NF_MATCH_MULTIPORT=m
 CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_DSCP=m
 CONFIG_IP_NF_MATCH_AH_ESP=m
@@ -553,9 +561,9 @@ CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_DNAT=m
 CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_MARK_T=m
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
+CONFIG_X25=m
+CONFIG_LAPB=m
+CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_FASTROUTE is not set
@@ -661,11 +669,13 @@ CONFIG_VIA_RHINE=m
 #
 # Ethernet (1000 Mbit)
 #
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_DL2K=m
+CONFIG_E1000=m
+CONFIG_E1000_NAPI=y
 CONFIG_MYRI_SBUS=m
-# CONFIG_NS83820 is not set
+CONFIG_NS83820=m
 CONFIG_HAMACHI=m
 CONFIG_YELLOWFIN=m
 CONFIG_R8169=m
@@ -710,8 +720,11 @@ CONFIG_NET_RADIO=y
 #
 # Wireless 802.11b ISA/PCI cards support
 #
-# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
+CONFIG_AIRO=m
+CONFIG_HERMES=m
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_PCI_HERMES=m
 CONFIG_NET_WIRELESS=y
 
 #
@@ -934,7 +947,6 @@ CONFIG_KEYBOARD_SUNKBD=y
 # CONFIG_KEYBOARD_NEWTON is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_SERIAL=y
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set

drivers/pci/pci.c

@@ -747,6 +747,7 @@ struct pci_dev *isa_bridge;
 EXPORT_SYMBOL(isa_bridge);
 #endif
 
+EXPORT_SYMBOL(pci_enable_device_bars);
 EXPORT_SYMBOL(pci_enable_device);
 EXPORT_SYMBOL(pci_disable_device);
 EXPORT_SYMBOL(pci_max_busnr);

drivers/serial/Kconfig

@@ -326,6 +326,14 @@ config SERIAL_SUNZILOG
 	  This driver supports the Zilog8530 serial ports found on many Sparc
 	  systems.  Say Y or M if you want to be able to these serial ports.
 
+config SERIAL_SUNZILOG_CONSOLE
+	bool "Console on Sun Zilog8530 serial port"
+	depends on SERIAL_SUNZILOG=y
+	help
+	  If you would like to be able to use the Zilog8530 serial port
+	  on your Sparc system as the console, you can do so by answering
+	  Y to this option.
+
 config SERIAL_SUNSU
 	tristate "Sun SU serial support"
 	depends on (SPARC32 || SPARC64) && PCI
@@ -334,6 +342,14 @@ config SERIAL_SUNSU
 	  mouse on (PCI) UltraSPARC systems.  Say Y or M if you want to be able
 	  to these serial ports.
 
+config SERIAL_SUNSU_CONSOLE
+	bool "Console on Sun SU serial port"
+	depends on SERIAL_SUNSU=y
+	help
+	  If you would like to be able to use the SU serial port
+	  on your Sparc system as the console, you can do so by answering
+	  Y to this option.
+
 config SERIAL_MUX
 	tristate "Serial MUX support"
 	depends on PARISC
@@ -380,6 +396,14 @@ config SERIAL_SUNSAB
 	  (PCI) UltraSPARC systems.  Say Y or M if you want to be able to these
 	  serial ports.
 
+config SERIAL_SUNSAB_CONSOLE
+	bool "Console on Sun Siemens SAB82532 serial port"
+	depends on SERIAL_SUNSAB=y
+	help
+	  If you would like to be able to use the SAB82532 serial port
+	  on your Sparc system as the console, you can do so by answering
+	  Y to this option.
+
 config V850E_NB85E_UART
 	bool "NEC V850E on-chip UART support"
 	depends on V850E_NB85E || V850E2_ANNA || V850E_AS85EP1
@@ -407,7 +431,7 @@ config SERIAL_CORE
 
 config SERIAL_CORE_CONSOLE
 	bool
-	depends on SERIAL_AMBA_CONSOLE || SERIAL_CLPS711X_CONSOLE || SERIAL_21285_CONSOLE || SERIAL_SA1100_CONSOLE || SERIAL_ANAKIN_CONSOLE || SERIAL_UART00_CONSOLE || SERIAL_8250_CONSOLE || SERIAL_MUX_CONSOLE || SERIAL_SUNCORE || V850E_NB85E_UART_CONSOLE || SERIAL98_CONSOLE
+	depends on SERIAL_AMBA_CONSOLE || SERIAL_CLPS711X_CONSOLE || SERIAL_21285_CONSOLE || SERIAL_SA1100_CONSOLE || SERIAL_ANAKIN_CONSOLE || SERIAL_UART00_CONSOLE || SERIAL_8250_CONSOLE || SERIAL_MUX_CONSOLE || SERIAL_SUNZILOG_CONSOLE || SERIAL_SUNSU_CONSOLE || SERIAL_SUNSAB_CONSOLE || V850E_NB85E_UART_CONSOLE || SERIAL98_CONSOLE
 	default y
 
 config SERIAL_68328

drivers/serial/sunsab.c

@@ -28,6 +28,7 @@
 #include <linux/ioport.h>
 #include <linux/circ_buf.h>
 #include <linux/serial.h>
+#include <linux/sysrq.h>
 #include <linux/console.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
@@ -38,6 +39,10 @@
 #include <asm/oplib.h>
 #include <asm/ebus.h>
 
+#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
 #include <linux/serial_core.h>
 
 #include "suncore.h"
@@ -838,6 +843,8 @@ static struct uart_driver sunsab_reg = {
 static struct uart_sunsab_port *sunsab_ports;
 static int num_channels;
 
+#ifdef CONFIG_SERIAL_SUNSAB_CONSOLE
+
 static __inline__ void sunsab_console_putchar(struct uart_sunsab_port *up, char c)
 {
 	unsigned long flags;
@@ -929,6 +936,7 @@ static struct console sunsab_console = {
 	.index	=	-1,
 	.data	=	&sunsab_reg,
 };
+#define SUNSAB_CONSOLE	(&sunsab_console)
 
 static void __init sunsab_console_init(void)
 {
@@ -949,6 +957,10 @@ static void __init sunsab_console_init(void)
 	sunsab_console.index = i;
 	register_console(&sunsab_console);
 }
+#else
+#define SUNSAB_CONSOLE		(NULL)
+#define sunsab_console_init()	do { } while (0)
+#endif
 
 static void __init for_each_sab_edev(void (*callback)(struct linux_ebus_device *, void *), void *arg)
 {
@@ -1091,7 +1103,7 @@ static int __init sunsab_init(void)
 
 	sunsab_reg.minor = sunserial_current_minor;
 	sunsab_reg.nr = num_channels;
-	sunsab_reg.cons = &sunsab_console;
+	sunsab_reg.cons = SUNSAB_CONSOLE;
 
 	ret = uart_register_driver(&sunsab_reg);
 	if (ret < 0) {

drivers/serial/sunsu.c

@@ -46,8 +46,7 @@
 #include <asm/isa.h>
 #endif
 
-/* #if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) */
-#if defined(CONFIG_MAGIC_SYSRQ)
+#if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
 #endif
 
@@ -1347,6 +1346,8 @@ static int __init sunsu_kbd_ms_init(void)
  * ------------------------------------------------------------
  */
 
+#ifdef CONFIG_SERIAL_SUNSU_CONSOLE
+
 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
 
 /*
@@ -1465,6 +1466,7 @@ static struct console sunsu_cons = {
 	.index	=	-1,
 	.data	=	&sunsu_reg,
 };
+#define SUNSU_CONSOLE	(&sunsu_cons)
 
 /*
  *	Register console.
@@ -1492,6 +1494,10 @@ static int __init sunsu_serial_console_init(void)
 	register_console(&sunsu_cons);
 	return 0;
 }
+#else
+#define SUNSU_CONSOLE			(NULL)
+#define sunsu_serial_console_init()	do { } while (0)
+#endif
 
 static int __init sunsu_serial_init(void)
 {
@@ -1522,7 +1528,7 @@ static int __init sunsu_serial_init(void)
 	sunserial_current_minor += instance;
 
 	sunsu_reg.nr = instance;
-	sunsu_reg.cons = &sunsu_cons;
+	sunsu_reg.cons = SUNSU_CONSOLE;
 
 	ret = uart_register_driver(&sunsu_reg);
 	if (ret < 0)

drivers/serial/sunzilog.c

@@ -28,6 +28,7 @@
 #include <linux/slab.h>
 #include <linux/circ_buf.h>
 #include <linux/serial.h>
+#include <linux/sysrq.h>
 #include <linux/console.h>
 #include <linux/spinlock.h>
 #ifdef CONFIG_SERIO
@@ -42,6 +43,10 @@
 #endif
 #include <asm/sbus.h>
 
+#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
 #include <linux/serial_core.h>
 
 #include "suncore.h"
@@ -1331,6 +1336,7 @@ static void sunzilog_serio_close(struct serio *serio)
 
 #endif /* CONFIG_SERIO */
 
+#ifdef CONFIG_SERIAL_SUNZILOG_CONSOLE
 static void
 sunzilog_console_write(struct console *con, const char *s, unsigned int count)
 {
@@ -1400,6 +1406,7 @@ static struct console sunzilog_console = {
 	.index	=	-1,
 	.data   =	&sunzilog_reg,
 };
+#define SUNZILOG_CONSOLE	(&sunzilog_console)
 
 static int __init sunzilog_console_init(void)
 {
@@ -1422,6 +1429,10 @@ static int __init sunzilog_console_init(void)
 	register_console(&sunzilog_console);
 	return 0;
 }
+#else
+#define SUNZILOG_CONSOLE	(NULL)
+#define sunzilog_console_init() do { } while (0)
+#endif
 
 /*
  * We scan the PROM tree recursively. This is the most reliable way
@@ -1639,7 +1650,7 @@ static int __init sunzilog_ports_init(void)
 	 * in the system.
 	 */
 	sunzilog_reg.nr = NUM_CHANNELS;
-	sunzilog_reg.cons = &sunzilog_console;
+	sunzilog_reg.cons = SUNZILOG_CONSOLE;
 
 	sunzilog_reg.minor = sunserial_current_minor;
 	sunserial_current_minor += NUM_CHANNELS;

drivers/usb/net/kaweth.c

@@ -57,10 +57,10 @@
 #include <linux/types.h>
 #include <linux/ethtool.h>
 #include <linux/pci.h>
+#include <linux/dma-mapping.h>
 #include <asm/uaccess.h>
 #include <asm/semaphore.h>
 #include <asm/byteorder.h>
-#include <asm/dma-mapping.h>
 
 #define DEBUG
 

include/asm-i386/io_apic.h

@@ -22,32 +22,44 @@
 /*
  * The structure of the IO-APIC:
  */
-struct IO_APIC_reg_00 {
-	__u32	__reserved_2	: 14,
+union IO_APIC_reg_00 {
+	u32	raw;
+	struct {
+		u32	__reserved_2	: 14,
 			LTS		:  1,
 			delivery_type	:  1,
 			__reserved_1	:  8,
 			ID		:  8;
-} __attribute__ ((packed));
+	} __attribute__ ((packed)) bits;
+};
 
-struct IO_APIC_reg_01 {
-	__u32	version		:  8,
+union IO_APIC_reg_01 {
+	u32	raw;
+	struct {
+		u32	version		:  8,
 			__reserved_2	:  7,
 			PRQ		:  1,
 			entries		:  8,
 			__reserved_1	:  8;
-} __attribute__ ((packed));
+	} __attribute__ ((packed)) bits;
+};
 
-struct IO_APIC_reg_02 {
-	__u32	__reserved_2	: 24,
+union IO_APIC_reg_02 {
+	u32	raw;
+	struct {
+		u32	__reserved_2	: 24,
 			arbitration	:  4,
 			__reserved_1	:  4;
-} __attribute__ ((packed));
+	} __attribute__ ((packed)) bits;
+};
 
-struct IO_APIC_reg_03 {
-	__u32	boot_DT		:  1,
+union IO_APIC_reg_03 {
+	u32	raw;
+	struct {
+		u32	boot_DT		:  1,
 			__reserved_1	: 31;
-} __attribute__ ((packed));
+	} __attribute__ ((packed)) bits;
+};
 
 /*
  * # of IO-APICs and # of IRQ routing registers