Merge maxwell.earthlink.net:/usr/src/linus-2.5

into maxwell.earthlink.net:/usr/src/fbdev-2.5

Documentation/filesystems/vfat.txt

@@ -8,10 +8,12 @@ if you want to format from within Linux.
 
 VFAT MOUNT OPTIONS
 ----------------------------------------------------------------------
-umask=###     -- The permission mask (see umask(1)) for the regulare file.
+umask=###     -- The permission mask (for files and directories, see umask(1)).
                  The default is the umask of current process.
 dmask=###     -- The permission mask for the directory.
                  The default is the umask of current process.
+fmask=###     -- The permission mask for files.
+                 The default is the umask of current process.
 codepage=###  -- Sets the codepage for converting to shortname characters
 		 on FAT and VFAT filesystems.  By default, codepage 437
 		 is used.  This is the default for the U.S. and some

arch/parisc/kernel/Makefile

@@ -11,7 +11,7 @@ endif
 AFLAGS_entry.o := -traditional
 AFLAGS_pacache.o := -traditional
 
-export-objs	:= parisc_ksyms.o keyboard.o
+export-objs	:= parisc_ksyms.o 
 
 obj-y	     	:= cache.o pacache.o setup.o traps.o time.o irq.o \
 		   pa7300lc.o syscall.o entry.o sys_parisc.o firmware.o \
@@ -22,7 +22,6 @@ obj-y	     	:= cache.o pacache.o setup.o traps.o time.o irq.o \
 obj-$(CONFIG_SMP) += smp.o 
 obj-$(CONFIG_PA11) += pci-dma.o
 obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_VT) += keyboard.o
 obj-$(CONFIG_PARISC64) += binfmt_elf32.o sys_parisc32.o \
 		ioctl32.o signal32.o
 # only supported for PCX-W/U in 64-bit mode at the moment

arch/parisc/kernel/keyboard.c

-/*
- *  WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
- *  ---------------------------------------------------------------
- *  This source file will be removed as soon as we have converted
- *  hp_psaux.c and hp_keyb.c to the input layer !
- *  
- */
-
-/*
- *  linux/arch/parisc/kernel/keyboard.c
- *
- *  Alex deVries <adevries@thepuffingroup.com>
- *  Copyright (1999) The Puffin Group
- *  Mostly rewritten by Philipp Rumpf <prumpf@tux.org>
- *  Copyright 2000 Philipp Rumpf
- */
-
-#include <linux/errno.h>
-#include <linux/keyboard.h>
-#include <asm/keyboard.h>
-#include <linux/module.h>
-
-static int def_setkeycode(unsigned int x, unsigned int y)
-{
-	return 0;
-}
-
-static int def_getkeycode(unsigned int x)
-{
-	return 0;
-}
-
-static int def_translate(unsigned char scancode, unsigned char *keycode,
-	char raw)
-{
-	*keycode = scancode;
-
-	return 1;
-}
-
-static char def_unexpected_up(unsigned char c)
-{
-	return 128;
-}
-
-static void def_leds(unsigned char leds)
-{
-}
-
-static void def_init_hw(void)
-{
-}
-
-static char def_sysrq_xlate[NR_KEYS];
-
-#define DEFAULT_KEYB_OPS \
-	.setkeycode	= def_setkeycode,	\
-	.getkeycode	= def_getkeycode, \
-	.translate	= def_translate, \
-	.unexpected_up	= def_unexpected_up, \
-	.leds		= def_leds, \
-	.init_hw	= def_init_hw, \
-	.sysrq_key	= 0xff, \
-	.sysrq_xlate	= def_sysrq_xlate,
-
-static struct kbd_ops def_kbd_ops = {
-	DEFAULT_KEYB_OPS
-};
-
-struct kbd_ops *kbd_ops = &def_kbd_ops;
-
-void unregister_kbd_ops(void)
-{
-	struct kbd_ops new_kbd_ops = { DEFAULT_KEYB_OPS };
-	register_kbd_ops(&new_kbd_ops);
-}
-EXPORT_SYMBOL(unregister_kbd_ops);
-
-void register_kbd_ops(struct kbd_ops *ops)
-{
-	if(ops->setkeycode)
-		kbd_ops->setkeycode = ops->setkeycode;
-	
-	if(ops->getkeycode)
-		kbd_ops->getkeycode = ops->getkeycode;
-	
-	if(ops->translate)
-		kbd_ops->translate = ops->translate;
-	
-	if(ops->unexpected_up)
-		kbd_ops->unexpected_up = ops->unexpected_up;
-	
-	if(ops->leds)
-		kbd_ops->leds = ops->leds;
-	
-	if(ops->init_hw)
-		kbd_ops->init_hw = ops->init_hw;
-	
-	kbd_ops->sysrq_key = ops->sysrq_key;
-	kbd_ops->sysrq_xlate = ops->sysrq_xlate;
-}

arch/sparc/kernel/sparc_ksyms.c

@@ -90,11 +90,13 @@ extern void dump_thread(struct pt_regs *, struct user *);
 
 #define EXPORT_SYMBOL_DOT(sym)					\
 extern int __sparc_dot_ ## sym (int) __asm__("." #sym);		\
-__EXPORT_SYMBOL(__sparc_dot_ ## sym, "." #sym)
+const struct kernel_symbol __ksymtab___sparc_dot_##sym		\
+__attribute__((section("__ksymtab")))				\
+= { (unsigned long)&__sparc_dot_##sym , "." #sym }
 
 #define EXPORT_SYMBOL_PRIVATE(sym)				\
 extern int __sparc_priv_ ## sym (int) __asm__("__" #sym);	\
-const struct module_symbol __export_priv_##sym			\
+const struct kernel_symbol __export_priv_##sym			\
 __attribute__((section("__ksymtab"))) =				\
 { (unsigned long) &__sparc_priv_ ## sym, "__" #sym }
 

arch/sparc/kernel/sys_sunos.c

@@ -34,6 +34,8 @@
 #include <linux/smp.h>
 #include <linux/smp_lock.h>
 
+#include <net/sock.h>
+
 #include <asm/uaccess.h>
 #ifndef KERNEL_DS
 #include <linux/segment.h>

arch/sparc/kernel/tick14.c

@@ -16,6 +16,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/timex.h>
+#include <linux/interrupt.h>
 
 #include <asm/oplib.h>
 #include <asm/segment.h>

arch/sparc/mm/iommu.c

@@ -192,9 +192,9 @@ static void iommu_get_scsi_sgl_pflush(struct scatterlist *sg, int sz, struct sbu
 {
 	unsigned long page, oldpage = 0;
 
-	while(sz >= 0) {
+	while(sz != 0) {
 		--sz;
-		page = ((unsigned long) sg[sz].offset) & PAGE_MASK;
+		page = (unsigned long) page_address(sg[sz].page);
 		if (oldpage == page)
 			page += PAGE_SIZE; /* We flushed that page already */
 		while(page < (unsigned long)(page_address(sg[sz].page) + sg[sz].offset + sg[sz].length)) {

arch/sparc64/Makefile

@@ -19,6 +19,7 @@ CC		:= $(shell if gcc -m64 -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then e
 NEW_GCC := $(shell if $(CC) -m64 -mcmodel=medlow -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo y; else echo n; fi; )
 NEW_GAS := $(shell if $(LD) -V 2>&1 | grep 'elf64_sparc' > /dev/null; then echo y; else echo n; fi)
 UNDECLARED_REGS := $(shell if $(CC) -c -x assembler /dev/null -Wa,--help | grep undeclared-regs > /dev/null; then echo y; else echo n; fi; )
+INLINE_LIMIT := $(shell if $(CC) -m64 -finline-limit=100000 -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo y; else echo n; fi; )
 
 export NEW_GCC
 
@@ -51,6 +52,10 @@ else
   AFLAGS += -m64 -mcpu=ultrasparc $(CC_UNDECL)
 endif
 
+ifeq ($(INLINE_LIMIT),y)
+  CFLAGS := $(CFLAGS) -finline-limit=100000
+endif
+
 ifeq ($(CONFIG_MCOUNT),y)
   CFLAGS := $(subst -fomit-frame-pointer,,$(CFLAGS))
   CFLAGS := $(CFLAGS) -pg

arch/sparc64/kernel/smp.c

@@ -145,28 +145,28 @@ void __init smp_callin(void)
 	 * purposes.  Also workaround BB_ERRATA_1 by doing a dummy
 	 * read back of %tick after writing it.
 	 */
-	__asm__ __volatile__("
-	sethi	%%hi(0x80000000), %%g1
-	ba,pt	%%xcc, 1f
-	 sllx	%%g1, 32, %%g1
-	.align	64
-1:	rd	%%tick, %%g2
-	add	%%g2, 6, %%g2
-	andn	%%g2, %%g1, %%g2
-	wrpr	%%g2, 0, %%tick
-	rdpr	%%tick, %%g0"
+	__asm__ __volatile__(
+	"sethi	%%hi(0x80000000), %%g1\n\t"
+	"ba,pt	%%xcc, 1f\n\t"
+	" sllx	%%g1, 32, %%g1\n\t"
+	".align	64\n"
+"1:	rd	%%tick, %%g2\n\t"
+	"add	%%g2, 6, %%g2\n\t"
+	"andn	%%g2, %%g1, %%g2\n\t"
+	"wrpr	%%g2, 0, %%tick\n\t"
+	"rdpr	%%tick, %%g0"
 	: /* no outputs */
 	: /* no inputs */
 	: "g1", "g2");
 
 	if (SPARC64_USE_STICK) {
 		/* Let the user get at STICK too. */
-		__asm__ __volatile__("
-			sethi	%%hi(0x80000000), %%g1
-			sllx	%%g1, 32, %%g1
-			rd	%%asr24, %%g2
-			andn	%%g2, %%g1, %%g2
-			wr	%%g2, 0, %%asr24"
+		__asm__ __volatile__(
+			"sethi	%%hi(0x80000000), %%g1\n\t"
+			"sllx	%%g1, 32, %%g1\n\t"
+			"rd	%%asr24, %%g2\n\t"
+			"andn	%%g2, %%g1, %%g2\n\t"
+			"wr	%%g2, 0, %%asr24"
 		: /* no outputs */
 		: /* no inputs */
 		: "g1", "g2");
@@ -283,18 +283,18 @@ static void spitfire_xcall_helper(u64 data0, u64 data1, u64 data2, u64 pstate, u
 	 * ADDR 0x20) for the dummy read. -DaveM
 	 */
 	tmp = 0x40;
-	__asm__ __volatile__("
-	wrpr	%1, %2, %%pstate
-	stxa	%4, [%0] %3
-	stxa	%5, [%0+%8] %3
-	add	%0, %8, %0
-	stxa	%6, [%0+%8] %3
-	membar	#Sync
-	stxa	%%g0, [%7] %3
-	membar	#Sync
-	mov	0x20, %%g1
-	ldxa	[%%g1] 0x7f, %%g0
-	membar	#Sync"
+	__asm__ __volatile__(
+	"wrpr	%1, %2, %%pstate\n\t"
+	"stxa	%4, [%0] %3\n\t"
+	"stxa	%5, [%0+%8] %3\n\t"
+	"add	%0, %8, %0\n\t"
+	"stxa	%6, [%0+%8] %3\n\t"
+	"membar	#Sync\n\t"
+	"stxa	%%g0, [%7] %3\n\t"
+	"membar	#Sync\n\t"
+	"mov	0x20, %%g1\n\t"
+	"ldxa	[%%g1] 0x7f, %%g0\n\t"
+	"membar	#Sync"
 	: "=r" (tmp)
 	: "r" (pstate), "i" (PSTATE_IE), "i" (ASI_INTR_W),
 	  "r" (data0), "r" (data1), "r" (data2), "r" (target),
@@ -1054,21 +1054,21 @@ static void __init smp_setup_percpu_timer(void)
 	 * read back from %tick_cmpr right after writing to it. -DaveM
 	 */
 	if (!SPARC64_USE_STICK) {
-	__asm__ __volatile__("
-		rd	%%tick, %%g1
-		ba,pt	%%xcc, 1f
-		 add	%%g1, %0, %%g1
-		.align	64
-	1:	wr	%%g1, 0x0, %%tick_cmpr
-		rd	%%tick_cmpr, %%g0"
+	__asm__ __volatile__(
+		"rd	%%tick, %%g1\n\t"
+		"ba,pt	%%xcc, 1f\n\t"
+		" add	%%g1, %0, %%g1\n\t"
+		".align	64\n"
+	"1:	wr	%%g1, 0x0, %%tick_cmpr\n\t"
+		"rd	%%tick_cmpr, %%g0"
 	: /* no outputs */
 	: "r" (current_tick_offset)
 	: "g1");
 	} else {
-	__asm__ __volatile__("
-		rd	%%asr24, %%g1
-		add	%%g1, %0, %%g1
-		wr	%%g1, 0x0, %%asr25"
+	__asm__ __volatile__(
+		"rd	%%asr24, %%g1\n\t"
+		"add	%%g1, %0, %%g1\n\t"
+		"wr	%%g1, 0x0, %%asr25"
 	: /* no outputs */
 	: "r" (current_tick_offset)
 	: "g1");

arch/sparc64/kernel/sys_sparc32.c

@@ -51,6 +51,7 @@
 #include <linux/sysctl.h>
 #include <linux/binfmts.h>
 #include <linux/dnotify.h>
+#include <linux/security.h>
 
 #include <asm/types.h>
 #include <asm/ipc.h>
@@ -1096,7 +1097,7 @@ static long do_readv_writev32(int type, struct file *file,
 	/* VERIFY_WRITE actually means a read, as we write to user space */
 	if ((retval + (type == VERIFY_WRITE)) > 0)
 		dnotify_parent(file->f_dentry,
-			(type == VERIFY_WRITE) ? DN_MODIFY : DN_ACCESS);
+			(type == VERIFY_WRITE) ? DN_ACCESS : DN_MODIFY);
 
 	return retval;
 }

arch/sparc64/solaris/ioctl.c

@@ -369,6 +369,7 @@ static inline int solaris_sockmod(unsigned int fd, unsigned int cmd, u32 arg)
 	case 106: /* SI_GETINTRANSIT */
 	case 107: /* SI_TCL_LINK */
 	case 108: /* SI_TCL_UNLINK */
+		;
 	}
 	return TNOTSUPPORT;
 }
@@ -456,6 +457,7 @@ static inline int solaris_timod(unsigned int fd, unsigned int cmd, u32 arg,
 	case 145: /* TI_GETPEERNAME */
 	case 146: /* TI_SETMYNAME */
 	case 147: /* TI_SETPEERNAME */
+		;
 	}
 	return TNOTSUPPORT;
 }

drivers/ide/ide-geometry.c

@@ -6,83 +6,6 @@
 #include <linux/mc146818rtc.h>
 #include <asm/io.h>
 
-/*
- * We query CMOS about hard disks : it could be that we have a SCSI/ESDI/etc
- * controller that is BIOS compatible with ST-506, and thus showing up in our
- * BIOS table, but not register compatible, and therefore not present in CMOS.
- *
- * Furthermore, we will assume that our ST-506 drives <if any> are the primary
- * drives in the system -- the ones reflected as drive 1 or 2.  The first
- * drive is stored in the high nibble of CMOS byte 0x12, the second in the low
- * nibble.  This will be either a 4 bit drive type or 0xf indicating use byte
- * 0x19 for an 8 bit type, drive 1, 0x1a for drive 2 in CMOS.  A non-zero value
- * means we have an AT controller hard disk for that drive.
- *
- * Of course, there is no guarantee that either drive is actually on the
- * "primary" IDE interface, but we don't bother trying to sort that out here.
- * If a drive is not actually on the primary interface, then these parameters
- * will be ignored.  This results in the user having to supply the logical
- * drive geometry as a boot parameter for each drive not on the primary i/f.
- *
- * The only "perfect" way to handle this would be to modify the setup.[cS] code
- * to do BIOS calls Int13h/Fn08h and Int13h/Fn48h to get all of the drive info
- * for us during initialization.  I have the necessary docs -- any takers?  -ml
- *
- * I did this, but it doesn't work - there is no reasonable way to find the
- * correspondence between the BIOS numbering of the disks and the Linux
- * numbering. -aeb
- *
- * The code below is bad. One of the problems is that drives 1 and 2
- * may be SCSI disks (even when IDE disks are present), so that
- * the geometry we read here from BIOS is attributed to the wrong disks.
- * Consequently, also the former "drive->present = 1" below was a mistake.
- *
- * Eventually the entire routine below should be removed.
- *
- * 17-OCT-2000 rjohnson@analogic.com Added spin-locks for reading CMOS
- * chip.
- */
-
-void probe_cmos_for_drives (ide_hwif_t *hwif)
-{
-#ifdef __i386__
-	extern struct drive_info_struct drive_info;
-	u8 cmos_disks, *BIOS = (u8 *) &drive_info;
-	int unit;
-	unsigned long flags;
-
-	if (hwif->chipset == ide_pdc4030 && hwif->channel != 0)
-		return;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	cmos_disks = CMOS_READ(0x12);
-	spin_unlock_irqrestore(&rtc_lock, flags);
-	/* Extract drive geometry from CMOS+BIOS if not already setup */
-	for (unit = 0; unit < MAX_DRIVES; ++unit) {
-		ide_drive_t *drive = &hwif->drives[unit];
-
-		if ((cmos_disks & (0xf0 >> (unit*4)))
-		   && !drive->present && !drive->nobios) {
-			u16 cyl = *(u16 *)BIOS;
-			unsigned char head = *(BIOS+2);
-			unsigned char sect = *(BIOS+14);
-			if (cyl > 0 && head > 0 && sect > 0 && sect < 64) {
-				drive->cyl   = drive->bios_cyl  = cyl;
-				drive->head  = drive->bios_head = head;
-				drive->sect  = drive->bios_sect = sect;
-				drive->ctl   = *(BIOS+8);
-			} else {
-				printk("hd%c: C/H/S=%d/%d/%d from BIOS ignored\n",
-				       unit+'a', cyl, head, sect);
-			}
-		}
-
-		BIOS += 16;
-	}
-#endif
-}
-
-
 extern unsigned long current_capacity (ide_drive_t *);
 
 /*

drivers/ide/ide-probe.c

@@ -639,12 +639,6 @@ void probe_hwif (ide_hwif_t *hwif)
 
 	if (hwif->noprobe)
 		return;
-#ifdef CONFIG_BLK_DEV_IDE
-	if (hwif->io_ports[IDE_DATA_OFFSET] == HD_DATA) {
-		extern void probe_cmos_for_drives(ide_hwif_t *);
-		probe_cmos_for_drives(hwif);
-	}
-#endif
 
 	if ((hwif->chipset != ide_4drives || !hwif->mate || !hwif->mate->present) &&
 #if CONFIG_BLK_DEV_PDC4030

drivers/input/misc/Kconfig

@@ -56,3 +56,12 @@ config INPUT_UINPUT
 	  The module will be called uinput.o.  If you want to compile it as a
 	  module, say M here and read <file:Documentation/modules.txt>.	    
 
+config INPUT_GSC
+	tristate "PA-RISC GSC PS/2 keyboard/mouse support"
+	depends on GSC && INPUT && INPUT_MISC
+	help
+	  Say Y here if you have a PS/2 keyboard and/or mouse attached
+	  to your PA-RISC box.	HP run the keyboard in AT mode rather than
+	  XT mode like everyone else, so we need our own driver.
+	  Furthermore, the GSC PS/2 controller shares IRQ between mouse and
+	  keyboard.

drivers/input/misc/Makefile

@@ -8,7 +8,4 @@ obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
 obj-$(CONFIG_INPUT_PCSPKR)		+= pcspkr.o
 obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
 obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
-
-# The global Rules.make.
-
-include $(TOPDIR)/Rules.make
+obj-$(CONFIG_INPUT_GSC)			+= gsc_ps2.o

drivers/media/video/tuner.c

@@ -982,7 +982,7 @@ static struct i2c_driver driver = {
 	.detach_client	= tuner_detach,
 	.command	= tuner_command,
 };
-static structi2c_clientclient_template = 
+static struct i2c_client client_template = 
 {
 	.name	= "(tunerunset)",
 	.flags	= I2C_CLIENT_ALLOW_USE,

drivers/serial/sunzilog.c

@@ -1586,8 +1586,9 @@ static void __init sunzilog_init_hw(void)
 		} else {
 			/* Normal serial TTY. */
 			up->parity_mask = 0xff;
-			up->curregs[R3] = RxENAB;
-			up->curregs[R5] = TxENAB;
+			up->curregs[R4] = PAR_EVEN | X16CLK | SB1;
+			up->curregs[R3] = RxENAB | Rx8;
+			up->curregs[R5] = TxENAB | Tx8;
 			up->curregs[R9] = NV | MIE;
 			up->curregs[R10] = NRZ;
 			up->curregs[R11] = TCBR | RCBR;

fs/xfs/support/move.c

@@ -30,6 +30,7 @@
  * http://oss.sgi.com/projects/GenInfo/SGIGPLNoticeExplan/
  */
 
+#include <linux/errno.h>
 #include <asm/uaccess.h>
 
 #include <xfs_types.h>

include/asm-sparc/elf.h

@@ -56,7 +56,7 @@ typedef struct {
 } elf_fpregset_t;
 
 #define ELF_CORE_COPY_TASK_REGS(__tsk, __elf_regs)	\
-	({ ELF_CORE_COPY_REGS((*(__elf_regs)), (__tsk)->thread_info->kregs); 1; })
+	({ ELF_CORE_COPY_REGS((*(__elf_regs)), (__tsk)->thread.kregs); 1; })
 
 /*
  * This is used to ensure we don't load something for the wrong architecture.

include/asm-sparc/hardirq.h

@@ -11,6 +11,7 @@
 #include <linux/threads.h>
 #include <linux/brlock.h>
 #include <linux/spinlock.h>
+#include <linux/cache.h>
 
 /* entry.S is sensitive to the offsets of these fields */ /* XXX P3 Is it? */
 typedef struct {

include/asm-sparc/io.h

@@ -187,9 +187,6 @@ extern unsigned long sbus_ioremap(struct resource *res, unsigned long offset,
 extern void sbus_iounmap(unsigned long vaddr, unsigned long size);
 
 
-#define virt_to_phys(x) __pa((unsigned long)(x))
-#define phys_to_virt(x) __va((unsigned long)(x))
-
 /*
  * At the moment, we do not use CMOS_READ anywhere outside of rtc.c,
  * so rtc_port is static in it. This should not change unless a new

include/asm-sparc/irq.h

@@ -19,7 +19,7 @@
 BTFIXUPDEF_CALL(char *, __irq_itoa, unsigned int)
 #define __irq_itoa(irq) BTFIXUP_CALL(__irq_itoa)(irq)
 
-#define NR_IRQS    15
+#define NR_IRQS    16
 
 #define irq_cannonicalize(irq)	(irq)
 

include/asm-sparc/page.h

@@ -174,6 +174,9 @@ extern __inline__ int get_order(unsigned long size)
 #define __pa(x)                 ((unsigned long)(x) - PAGE_OFFSET)
 #define __va(x)                 ((void *)((unsigned long) (x) + PAGE_OFFSET))
 
+#define virt_to_phys(x)		__pa((unsigned long)(x))
+#define phys_to_virt(x)		__va((unsigned long)(x))
+
 #define pfn_to_page(pfn)        (mem_map + (pfn))
 #define page_to_pfn(page)       ((unsigned long)((page) - mem_map))
 #define virt_to_page(kaddr)	(mem_map + (__pa(kaddr) >> PAGE_SHIFT))

include/asm-sparc64/irq.h

@@ -110,7 +110,7 @@ static __inline__ char *__irq_itoa(unsigned int irq)
 	return buff;
 }
 
-#define NR_IRQS    15
+#define NR_IRQS    16
 
 #define irq_cannonicalize(irq)	(irq)
 extern void disable_irq(unsigned int);

include/asm-sparc64/rwsem.h

@@ -279,7 +279,7 @@ static __inline__ int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
 		"mov		%%g7, %0\n\t"
 		: "=&r" (tmp)
 		: "0" (tmp), "r" (sem)
-		: "g5", "g7", "memory");
+		: "g5", "g7", "memory", "cc");
 
 	return tmp + delta;
 }

include/asm-sparc64/system.h

@@ -164,6 +164,11 @@ do {	spin_unlock_irq(&(prev)->switch_lock);	\
 	 * not preserve it's value.  Hairy, but it lets us remove 2 loads
 	 * and 2 stores in this critical code path.  -DaveM
 	 */
+#if __GNUC__ >= 3
+#define EXTRA_CLOBBER ,"%l1"
+#else
+#define EXTRA_CLOBBER
+#endif
 #define switch_to(prev, next, last)					\
 do {	if (test_thread_flag(TIF_PERFCTR)) {				\
 		unsigned long __tmp;					\
@@ -209,10 +214,11 @@ do {	if (test_thread_flag(TIF_PERFCTR)) {				\
 	: "0" (next->thread_info),					\
 	  "i" (TI_WSTATE), "i" (TI_KSP), "i" (TI_FLAGS), "i" (TI_CWP),	\
 	  "i" (_TIF_NEWCHILD), "i" (TI_TASK)				\
-	: "cc", "g1", "g2", "g3", "g5", "g7",				\
+	: "cc",								\
+	        "g1", "g2", "g3",       "g5",       "g7",		\
 	              "l2", "l3", "l4", "l5", "l6", "l7",		\
 	  "i0", "i1", "i2", "i3", "i4", "i5",				\
-	  "o0", "o1", "o2", "o3", "o4", "o5", "o7");			\
+	  "o0", "o1", "o2", "o3", "o4", "o5",       "o7" EXTRA_CLOBBER);\
 	/* If you fuck with this, update ret_from_syscall code too. */	\
 	if (test_thread_flag(TIF_PERFCTR)) {				\
 		write_pcr(current_thread_info()->pcr_reg);		\

sound/core/ioctl32/ioctl32.c

@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/time.h>
 #include <linux/slab.h>
+#include <linux/fs.h>
 #include <linux/init.h>
 #include <sound/core.h>
 #include <sound/control.h>

sound/core/ioctl32/rawmidi32.c

@@ -20,6 +20,7 @@
 
 #include <sound/driver.h>
 #include <linux/time.h>
+#include <linux/fs.h>
 #include <sound/core.h>
 #include <sound/rawmidi.h>
 #include <asm/uaccess.h>

sound/core/ioctl32/seq32.c

@@ -20,6 +20,7 @@
 
 #include <sound/driver.h>
 #include <linux/time.h>
+#include <linux/fs.h>
 #include <sound/core.h>
 #include <sound/timer.h>
 #include <asm/uaccess.h>

sound/core/ioctl32/timer32.c

@@ -20,6 +20,7 @@
 
 #include <sound/driver.h>
 #include <linux/time.h>
+#include <linux/fs.h>
 #include <sound/core.h>
 #include <sound/timer.h>
 #include <asm/uaccess.h>