Commit 27898988 authored by James Bottomley's avatar James Bottomley

[SCSI] fusion: default MSI to disabled for SPI and FC controllers

There's a fault on the FC controllers that makes them not respond
correctly to MSI.  The SPI controllers are fine, but are likely to be
onboard on older motherboards which don't handle MSI correctly, so
default both these cases to disabled.  Enable by setting the module
parameter mpt_msi_enable=1.

For the SAS case, enable MSI by default, but it can be disabled by
setting the module parameter mpt_msi_enable=0.

Cc: "Prakash, Sathya" <sathya.prakash@lsi.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
parent 0ce3a7e5
...@@ -1686,9 +1686,14 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) ...@@ -1686,9 +1686,14 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->bus_type = SAS; ioc->bus_type = SAS;
} }
if (ioc->bus_type == SAS && mpt_msi_enable == -1) if (mpt_msi_enable == -1) {
ioc->msi_enable = 1; /* Enable on SAS, disable on FC and SPI */
else if (ioc->bus_type == SAS)
ioc->msi_enable = 1;
else
ioc->msi_enable = 0;
} else
/* follow flag: 0 - disable; 1 - enable */
ioc->msi_enable = mpt_msi_enable; ioc->msi_enable = mpt_msi_enable;
if (ioc->errata_flag_1064) if (ioc->errata_flag_1064)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment