Commit 27a0c231 authored by Marek Szyprowski's avatar Marek Szyprowski Committed by Sasha Levin

serial: samsung: Use right device for DMA-mapping calls

[ Upstream commit 768d64f4 ]

Driver should provide its own struct device for all DMA-mapping calls instead
of extracting device pointer from DMA engine channel. Although this is harmless
from the driver operation perspective on ARM architecture, it is always good
to use the DMA mapping API in a proper way. This patch fixes following DMA API
debug warning:

WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1241 check_sync+0x520/0x9f4
samsung-uart 12c20000.serial: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000006df0f580] [size=64 bytes]
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1-00137-g07ca963 #51
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c011aaa4>] (unwind_backtrace) from [<c01127c0>] (show_stack+0x20/0x24)
[<c01127c0>] (show_stack) from [<c06ba5d8>] (dump_stack+0x84/0xa0)
[<c06ba5d8>] (dump_stack) from [<c0139528>] (__warn+0x14c/0x180)
[<c0139528>] (__warn) from [<c01395a4>] (warn_slowpath_fmt+0x48/0x50)
[<c01395a4>] (warn_slowpath_fmt) from [<c0729058>] (check_sync+0x520/0x9f4)
[<c0729058>] (check_sync) from [<c072967c>] (debug_dma_sync_single_for_device+0x88/0xc8)
[<c072967c>] (debug_dma_sync_single_for_device) from [<c0803c10>] (s3c24xx_serial_start_tx_dma+0x100/0x2f8)
[<c0803c10>] (s3c24xx_serial_start_tx_dma) from [<c0804338>] (s3c24xx_serial_tx_chars+0x198/0x33c)
Reported-by: default avatarSeung-Woo Kim <sw0312.kim@samsung.com>
Fixes: 62c37eed ("serial: samsung: add dma reqest/release functions")
CC: stable@vger.kernel.org # v4.0+
Signed-off-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: default avatarShuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
parent 5eb0c97f
......@@ -925,14 +925,13 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
return -ENOMEM;
}
dma->rx_addr = dma_map_single(dma->rx_chan->device->dev, dma->rx_buf,
dma->rx_addr = dma_map_single(p->port.dev, dma->rx_buf,
dma->rx_size, DMA_FROM_DEVICE);
spin_lock_irqsave(&p->port.lock, flags);
/* TX buffer */
dma->tx_addr = dma_map_single(dma->tx_chan->device->dev,
p->port.state->xmit.buf,
dma->tx_addr = dma_map_single(p->port.dev, p->port.state->xmit.buf,
UART_XMIT_SIZE, DMA_TO_DEVICE);
spin_unlock_irqrestore(&p->port.lock, flags);
......@@ -946,7 +945,7 @@ static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p)
if (dma->rx_chan) {
dmaengine_terminate_all(dma->rx_chan);
dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr,
dma_unmap_single(p->port.dev, dma->rx_addr,
dma->rx_size, DMA_FROM_DEVICE);
kfree(dma->rx_buf);
dma_release_channel(dma->rx_chan);
......@@ -955,7 +954,7 @@ static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p)
if (dma->tx_chan) {
dmaengine_terminate_all(dma->tx_chan);
dma_unmap_single(dma->tx_chan->device->dev, dma->tx_addr,
dma_unmap_single(p->port.dev, dma->tx_addr,
UART_XMIT_SIZE, DMA_TO_DEVICE);
dma_release_channel(dma->tx_chan);
dma->tx_chan = NULL;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment