ARM: dts: marvell: fix PCI bus dtc warnings

dtc recently added PCI bus checks. Fix these warnings.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Documentation/devicetree/bindings/pci/mvebu-pci.txt

@@ -286,7 +286,7 @@ pcie-controller {
 		status = "disabled";
 	};
 
-	pcie@10,0 {
+	pcie@a,0 {
 		device_type = "pci";
 		assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
 		reg = <0x5000 0 0 0 0>;

arch/arm/boot/dts/armada-370.dtsi

@@ -72,7 +72,7 @@ bootrom {
 			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
 		};
 
-		pciec: pcie-controller@82000000 {
+		pciec: pcie@82000000 {
 			compatible = "marvell,armada-370-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -100,6 +100,7 @@ pcie0: pcie@1,0 {
 				#interrupt-cells = <1>;
                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 58>;
 				marvell,pcie-port = <0>;
@@ -117,6 +118,7 @@ pcie2: pcie@2,0 {
 				#interrupt-cells = <1>;
                                 ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
                                           0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 62>;
 				marvell,pcie-port = <1>;

arch/arm/boot/dts/armada-375.dtsi

@@ -582,7 +582,7 @@ coredivclk: corediv-clock@e8250 {
 			};
 		};
 
-		pciec: pcie-controller@82000000 {
+		pciec: pcie@82000000 {
 			compatible = "marvell,armada-370-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -610,6 +610,7 @@ pcie0: pcie@1,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				marvell,pcie-port = <0>;
@@ -627,6 +628,7 @@ pcie1: pcie@2,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				marvell,pcie-port = <0>;

arch/arm/boot/dts/armada-380.dtsi

@@ -71,7 +71,7 @@ pinctrl@18000 {
 			};
 		};
 
-		pcie-controller {
+		pcie {
 			compatible = "marvell,armada-370-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -104,6 +104,7 @@ pcie@1,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				marvell,pcie-port = <0>;
@@ -122,6 +123,7 @@ pcie@2,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				marvell,pcie-port = <1>;
@@ -140,6 +142,7 @@ pcie@3,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				marvell,pcie-port = <2>;

arch/arm/boot/dts/armada-385-db-ap.dts

@@ -209,7 +209,7 @@ bm-bppi {
 			status = "okay";
 		};
 
-		pcie-controller {
+		pcie {
 			status = "okay";
 
 			/*

arch/arm/boot/dts/armada-385-turris-omnia.dts

@@ -96,7 +96,7 @@ usb3@f8000 {
 			};
 		};
 
-		pcie-controller {
+		pcie {
 			status = "okay";
 
 			pcie@1,0 {

arch/arm/boot/dts/armada-385.dtsi

@@ -70,7 +70,7 @@ cpu@1 {
 	};
 
 	soc {
-		pciec: pcie-controller {
+		pciec: pcie {
 			compatible = "marvell,armada-370-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -109,6 +109,7 @@ pcie1: pcie@1,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				marvell,pcie-port = <0>;
@@ -127,6 +128,7 @@ pcie2: pcie@2,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				marvell,pcie-port = <1>;
@@ -145,6 +147,7 @@ pcie3: pcie@3,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				marvell,pcie-port = <2>;
@@ -166,6 +169,7 @@ pcie4: pcie@4,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				marvell,pcie-port = <3>;

arch/arm/boot/dts/armada-388-clearfog.dts

@@ -62,7 +62,7 @@ usb3@f0000 {
 			};
 		};
 
-		pcie-controller {
+		pcie {
 			pcie@3,0 {
 				/* Port 2, Lane 0. CON2, nearest CPU. */
 				reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;

arch/arm/boot/dts/armada-388-clearfog.dtsi

@@ -104,7 +104,7 @@ usb3@f8000 {
 			};
 		};
 
-		pcie-controller {
+		pcie {
 			status = "okay";
 			/*
 			 * The two PCIe units are accessible through

arch/arm/boot/dts/armada-388-db.dts

@@ -172,7 +172,7 @@ bm-bppi {
 			status = "okay";
 		};
 
-		pcie-controller {
+		pcie {
 			status = "okay";
 			/*
 			 * The two PCIe units are accessible through

arch/arm/boot/dts/armada-388-gp.dts

@@ -240,7 +240,7 @@ bm-bppi {
 			status = "okay";
 		};
 
-		pcie-controller {
+		pcie {
 			status = "okay";
 			/*
 			 * One PCIe units is accessible through

arch/arm/boot/dts/armada-388-rd.dts

@@ -117,7 +117,7 @@ usb3@f0000 {
 			};
 		};
 
-		pcie-controller {
+		pcie {
 			status = "okay";
 			/*
 			 * One PCIe units is accessible through

arch/arm/boot/dts/armada-390-db.dts

@@ -123,7 +123,7 @@ usb3@f8000 {
 			};
 		};
 
-		pcie-controller {
+		pcie {
 			status = "okay";
 
 			/* CON30 */

arch/arm/boot/dts/armada-395-gp.dts

@@ -139,7 +139,7 @@ usb3@f0000 {
 			};
 		};
 
-		pcie-controller {
+		pcie {
 			status = "okay";
 
 			/*

arch/arm/boot/dts/armada-398-db.dts

@@ -118,7 +118,7 @@ usb3@f8000 {
 			};
 		};
 
-		pcie-controller {
+		pcie {
 			status = "okay";
 
 			pcie@1,0 {

arch/arm/boot/dts/armada-39x.dtsi

@@ -442,7 +442,7 @@ thermal@e8078 {
 			};
 		};
 
-		pcie-controller {
+		pcie {
 			compatible = "marvell,armada-370-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -481,6 +481,7 @@ pcie@1,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				marvell,pcie-port = <0>;
@@ -499,6 +500,7 @@ pcie@2,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				marvell,pcie-port = <1>;
@@ -517,6 +519,7 @@ pcie@3,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				marvell,pcie-port = <2>;
@@ -538,6 +541,7 @@ pcie@4,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				marvell,pcie-port = <3>;

arch/arm/boot/dts/armada-xp-98dx3236.dtsi

@@ -91,7 +91,7 @@ bootrom {
 		/*
 		 * 98DX3236 has 1 x1 PCIe unit Gen2.0
 		 */
-		pciec: pcie-controller@82000000 {
+		pciec: pcie@82000000 {
 			compatible = "marvell,armada-xp-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -116,6 +116,7 @@ pcie1: pcie@1,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 58>;
 				marvell,pcie-port = <0>;

arch/arm/boot/dts/armada-xp-db.dts

@@ -242,7 +242,7 @@ pcie@9,0 {
 		/* Port 2, Lane 0 */
 		status = "okay";
 	};
-	pcie@10,0 {
+	pcie@a,0 {
 		/* Port 3, Lane 0 */
 		status = "okay";
 	};

arch/arm/boot/dts/armada-xp-gp.dts

@@ -227,7 +227,7 @@ pcie@9,0 {
 		/* Port 2, Lane 0 */
 		status = "okay";
 	};
-	pcie@10,0 {
+	pcie@a,0 {
 		/* Port 3, Lane 0 */
 		status = "okay";
 	};

arch/arm/boot/dts/armada-xp-mv78230.dtsi

@@ -86,7 +86,7 @@ soc {
 		 * configured as x4 or quad x1 lanes. One unit is
 		 * x1 only.
 		 */
-		pciec: pcie-controller@82000000 {
+		pciec: pcie@82000000 {
 			compatible = "marvell,armada-xp-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -123,6 +123,7 @@ pcie1: pcie@1,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 58>;
 				marvell,pcie-port = <0>;
@@ -140,6 +141,7 @@ pcie2: pcie@2,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 59>;
 				marvell,pcie-port = <0>;
@@ -157,6 +159,7 @@ pcie3: pcie@3,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 60>;
 				marvell,pcie-port = <0>;
@@ -174,6 +177,7 @@ pcie4: pcie@4,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 61>;
 				marvell,pcie-port = <0>;
@@ -191,6 +195,7 @@ pcie5: pcie@5,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
 					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 62>;
 				marvell,pcie-port = <1>;

arch/arm/boot/dts/armada-xp-mv78260.dtsi

@@ -87,7 +87,7 @@ soc {
 		 * configured as x4 or quad x1 lanes. One unit is
 		 * x4 only.
 		 */
-		pciec: pcie-controller@82000000 {
+		pciec: pcie@82000000 {
 			compatible = "marvell,armada-xp-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -138,6 +138,7 @@ pcie1: pcie@1,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 58>;
 				marvell,pcie-port = <0>;
@@ -155,6 +156,7 @@ pcie2: pcie@2,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 59>;
 				marvell,pcie-port = <0>;
@@ -172,6 +174,7 @@ pcie3: pcie@3,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 60>;
 				marvell,pcie-port = <0>;
@@ -189,6 +192,7 @@ pcie4: pcie@4,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 61>;
 				marvell,pcie-port = <0>;
@@ -206,6 +210,7 @@ pcie5: pcie@5,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
 					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 62>;
 				marvell,pcie-port = <1>;
@@ -223,6 +228,7 @@ pcie6: pcie@6,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
 					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 63>;
 				marvell,pcie-port = <1>;
@@ -240,6 +246,7 @@ pcie7: pcie@7,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
 					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 64>;
 				marvell,pcie-port = <1>;
@@ -257,6 +264,7 @@ pcie8: pcie@8,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
 					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 65>;
 				marvell,pcie-port = <1>;
@@ -274,6 +282,7 @@ pcie9: pcie@9,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
 					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 99>;
 				marvell,pcie-port = <2>;

arch/arm/boot/dts/armada-xp-mv78460.dtsi

@@ -104,7 +104,7 @@ soc {
 		 * configured as x4 or quad x1 lanes. Two units are
 		 * x4/x1.
 		 */
-		pciec: pcie-controller@82000000 {
+		pciec: pcie@82000000 {
 			compatible = "marvell,armada-xp-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -159,6 +159,7 @@ pcie1: pcie@1,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 58>;
 				marvell,pcie-port = <0>;
@@ -176,6 +177,7 @@ pcie2: pcie@2,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 59>;
 				marvell,pcie-port = <0>;
@@ -193,6 +195,7 @@ pcie3: pcie@3,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 60>;
 				marvell,pcie-port = <0>;
@@ -210,6 +213,7 @@ pcie4: pcie@4,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 61>;
 				marvell,pcie-port = <0>;
@@ -227,6 +231,7 @@ pcie5: pcie@5,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
 					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 62>;
 				marvell,pcie-port = <1>;
@@ -244,6 +249,7 @@ pcie6: pcie@6,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
 					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 63>;
 				marvell,pcie-port = <1>;
@@ -261,6 +267,7 @@ pcie7: pcie@7,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
 					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 64>;
 				marvell,pcie-port = <1>;
@@ -278,6 +285,7 @@ pcie8: pcie@8,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
 					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 65>;
 				marvell,pcie-port = <1>;
@@ -295,6 +303,7 @@ pcie9: pcie@9,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
 					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 99>;
 				marvell,pcie-port = <2>;
@@ -303,7 +312,7 @@ pcie9: pcie@9,0 {
 				status = "disabled";
 			};
 
-			pcie10: pcie@10,0 {
+			pcie10: pcie@a,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
 				reg = <0x5000 0 0 0 0>;
@@ -312,6 +321,7 @@ pcie10: pcie@10,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
 					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 103>;
 				marvell,pcie-port = <3>;

arch/arm/boot/dts/dove-d3plug.dts

@@ -88,7 +88,7 @@ spi-flash@0 {
 &pcie {
 	status = "okay";
 	/* Fresco Logic USB3.0 xHCI controller */
-	pcie-port@0 {
+	pcie@1 {
 		status = "okay";
 		reset-gpios = <&gpio0 26 1>;
 		reset-delay-us = <20000>;
@@ -96,7 +96,7 @@ pcie-port@0 {
 		pinctrl-names = "default";
 	};
 	/* Mini-PCIe slot */
-	pcie-port@1 {
+	pcie@2 {
 		status = "okay";
 		reset-gpios = <&gpio0 25 1>;
 	};

arch/arm/boot/dts/dove.dtsi

@@ -89,7 +89,7 @@ MBUS_ID(0x01, 0xfd) 0 0xf8000000 0x8000000   /* BootROM  128M */
 			  MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000   /* CESA SRAM  1M */
 			  MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU  SRAM  1M */
 
-		pcie: pcie-controller {
+		pcie: pcie {
 			compatible = "marvell,dove-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -106,7 +106,7 @@ pcie: pcie-controller {
 				  0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0   /* Port 1.0 Mem */
 				  0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
 
-			pcie0: pcie-port@0 {
+			pcie0: pcie@1 {
 				device_type = "pci";
 				status = "disabled";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
@@ -118,13 +118,14 @@ pcie0: pcie-port@0 {
 				#size-cells = <2>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 				          0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
 
 				#interrupt-cells = <1>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &intc 16>;
 			};
 
-			pcie1: pcie-port@1 {
+			pcie1: pcie@2 {
 				device_type = "pci";
 				status = "disabled";
 				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
@@ -136,6 +137,7 @@ pcie1: pcie-port@1 {
 				#size-cells = <2>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 				          0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
 
 				#interrupt-cells = <1>;
 				interrupt-map-mask = <0 0 0 0>;

arch/arm/boot/dts/kirkwood-6192.dtsi

 / {
 	mbus@f1000000 {
-		pciec: pcie-controller@82000000 {
+		pciec: pcie@82000000 {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -24,6 +24,7 @@ pcie0: pcie@1,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &intc 9>;
 				marvell,pcie-port = <0>;

arch/arm/boot/dts/kirkwood-6281.dtsi

 / {
 	mbus@f1000000 {
-		pciec: pcie-controller@82000000 {
+		pciec: pcie@82000000 {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -24,6 +24,7 @@ pcie0: pcie@1,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &intc 9>;
 				marvell,pcie-port = <0>;

arch/arm/boot/dts/kirkwood-6282.dtsi

 / {
 	mbus@f1000000 {
-		pciec: pcie-controller@82000000 {
+		pciec: pcie@82000000 {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -28,6 +28,7 @@ pcie0: pcie@1,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &intc 9>;
 				marvell,pcie-port = <0>;
@@ -45,6 +46,7 @@ pcie1: pcie@2,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &intc 10>;
 				marvell,pcie-port = <1>;

arch/arm/boot/dts/kirkwood-98dx4122.dtsi

 / {
 	mbus@f1000000 {
-		pciec: pcie-controller@82000000 {
+		pciec: pcie@82000000 {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -24,6 +24,7 @@ pcie0: pcie@1,0 {
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &intc 9>;
 				marvell,pcie-port = <0>;