wl12xx: use 1 spare block in all cases

Remove support for firmwares that require 2 spare blocks for packet TX
(and delete the WL12XX_QUIRK_USE_2_SPARE_BLOCKS quirk definition)
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

drivers/net/wireless/wl12xx/boot.c

@@ -107,16 +107,6 @@ static unsigned int wl12xx_get_fw_ver_quirks(struct wl1271 *wl)
 	unsigned int quirks = 0;
 	unsigned int *fw_ver = wl->chip.fw_ver;
 
-	/* Only for wl127x */
-	if ((fw_ver[FW_VER_CHIP] == FW_VER_CHIP_WL127X) &&
-	    /* Check STA version */
-	    (((fw_ver[FW_VER_IF_TYPE] == FW_VER_IF_TYPE_STA) &&
-	      (fw_ver[FW_VER_MINOR] < FW_VER_MINOR_1_SPARE_STA_MIN)) ||
-	     /* Check AP version */
-	     ((fw_ver[FW_VER_IF_TYPE] == FW_VER_IF_TYPE_AP) &&
-	      (fw_ver[FW_VER_MINOR] < FW_VER_MINOR_1_SPARE_AP_MIN))))
-		quirks |= WL12XX_QUIRK_USE_2_SPARE_BLOCKS;
-
 	/* Only new station firmwares support routing fw logs to the host */
 	if ((fw_ver[FW_VER_IF_TYPE] == FW_VER_IF_TYPE_STA) &&
 	    (fw_ver[FW_VER_MINOR] < FW_VER_MINOR_FWLOG_STA_MIN))

drivers/net/wireless/wl12xx/tx.c

@@ -169,12 +169,9 @@ static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra,
 	u32 len;
 	u32 total_blocks;
 	int id, ret = -EBUSY;
-	u32 spare_blocks;
 
-	if (unlikely(wl->quirks & WL12XX_QUIRK_USE_2_SPARE_BLOCKS))
-		spare_blocks = 2;
-	else
-		spare_blocks = 1;
+	/* we use 1 spare block */
+	u32 spare_blocks = 1;
 
 	if (buf_offset + total_len > WL1271_AGGR_BUFFER_SIZE)
 		return -EAGAIN;

drivers/net/wireless/wl12xx/wl12xx.h

@@ -656,12 +656,6 @@ size_t wl12xx_copy_fwlog(struct wl1271 *wl, u8 *memblock, size_t maxlen);
 /* Each RX/TX transaction requires an end-of-transaction transfer */
 #define WL12XX_QUIRK_END_OF_TRANSACTION		BIT(0)
 
-/*
- * Older firmwares use 2 spare TX blocks
- * (for STA < 6.1.3.50.58 or for AP < 6.2.0.0.47)
- */
-#define WL12XX_QUIRK_USE_2_SPARE_BLOCKS		BIT(1)
-
 /* WL128X requires aggregated packets to be aligned to the SDIO block size */
 #define WL12XX_QUIRK_BLOCKSIZE_ALIGNMENT	BIT(2)