Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] fix check of PQ and PDT bits for WLUNs
  [SCSI] make scsi_check_sense HARDWARE_ERROR return ADD_TO_MLQUEUE on retry
  [SCSI] scsi_dh: make check_sense return ADD_TO_MLQUEUE
  [SCSI] zfcp: Remove duplicated unlikely() macros.
  [SCSI] zfcp: channel cannot be detached due to refcount imbalance
  [SCSI] zfcp: Fix reference counter for remote ports
  [SCSI] zfcp: Simplify ccw notify handler
  [SCSI] zfcp: Correctly query end flag in gpn_ft response
  [SCSI] zfcp: Fix request queue locking
  [SCSI] sd: select CRC_T10DIF only when necessary

drivers/s390/scsi/zfcp_ccw.c

@@ -152,10 +152,8 @@ static int zfcp_ccw_set_offline(struct ccw_device *ccw_device)
  */
 static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event)
 {
-	struct zfcp_adapter *adapter;
+	struct zfcp_adapter *adapter = dev_get_drvdata(&ccw_device->dev);
 
-	down(&zfcp_data.config_sema);
-	adapter = dev_get_drvdata(&ccw_device->dev);
 	switch (event) {
 	case CIO_GONE:
 		dev_warn(&adapter->ccw_device->dev, "device gone\n");
@@ -174,8 +172,6 @@ static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event)
 					89, NULL);
 		break;
 	}
-	zfcp_erp_wait(adapter);
-	up(&zfcp_data.config_sema);
 	return 1;
 }
 

drivers/s390/scsi/zfcp_fc.c

@@ -39,18 +39,6 @@ struct zfcp_gpn_ft {
 	struct scatterlist sg_resp[ZFCP_GPN_FT_BUFFERS];
 };
 
-static struct zfcp_port *zfcp_get_port_by_did(struct zfcp_adapter *adapter,
-					      u32 d_id)
-{
-	struct zfcp_port *port;
-
-	list_for_each_entry(port, &adapter->port_list_head, list)
-		if ((port->d_id == d_id) &&
-		    !atomic_test_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status))
-			return port;
-	return NULL;
-}
-
 static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
 				   struct fcp_rscn_element *elem)
 {
@@ -341,12 +329,13 @@ void zfcp_test_link(struct zfcp_port *port)
 
 	zfcp_port_get(port);
 	retval = zfcp_fc_adisc(port);
-	if (retval == 0 || retval == -EBUSY)
+	if (retval == 0)
 		return;
 
 	/* send of ADISC was not possible */
 	zfcp_port_put(port);
-	zfcp_erp_port_forced_reopen(port, 0, 65, NULL);
+	if (retval != -EBUSY)
+		zfcp_erp_port_forced_reopen(port, 0, 65, NULL);
 }
 
 static int zfcp_scan_get_nameserver(struct zfcp_adapter *adapter)
@@ -363,7 +352,6 @@ static int zfcp_scan_get_nameserver(struct zfcp_adapter *adapter)
 		if (ret)
 			return ret;
 		zfcp_erp_wait(adapter);
-		zfcp_port_put(adapter->nameserver_port);
 	}
 	return !atomic_test_mask(ZFCP_STATUS_COMMON_UNBLOCKED,
 				  &adapter->nameserver_port->status);
@@ -475,7 +463,7 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft)
 	struct zfcp_adapter *adapter = ct->port->adapter;
 	struct zfcp_port *port, *tmp;
 	u32 d_id;
-	int ret = 0, x;
+	int ret = 0, x, last = 0;
 
 	if (ct->status)
 		return -EIO;
@@ -492,19 +480,24 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft)
 	down(&zfcp_data.config_sema);
 
 	/* first entry is the header */
-	for (x = 1; x < ZFCP_GPN_FT_MAX_ENTRIES; x++) {
+	for (x = 1; x < ZFCP_GPN_FT_MAX_ENTRIES && !last; x++) {
 		if (x % (ZFCP_GPN_FT_ENTRIES + 1))
 			acc++;
 		else
 			acc = sg_virt(++sg);
 
+		last = acc->control & 0x80;
 		d_id = acc->port_id[0] << 16 | acc->port_id[1] << 8 |
 		       acc->port_id[2];
 
 		/* skip the adapter's port and known remote ports */
-		if (acc->wwpn == fc_host_port_name(adapter->scsi_host) ||
-		     zfcp_get_port_by_did(adapter, d_id))
+		if (acc->wwpn == fc_host_port_name(adapter->scsi_host))
+			continue;
+		port = zfcp_get_port_by_wwpn(adapter, acc->wwpn);
+		if (port) {
+			zfcp_port_get(port);
 			continue;
+		}
 
 		port = zfcp_port_enqueue(adapter, acc->wwpn,
 					 ZFCP_STATUS_PORT_DID_DID |
@@ -513,8 +506,6 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft)
 			ret = PTR_ERR(port);
 		else
 			zfcp_erp_port_reopen(port, 0, 149, NULL);
-		if (acc->control & 0x80) /* last entry */
-			break;
 	}
 
 	zfcp_erp_wait(adapter);

drivers/s390/scsi/zfcp_qdio.c

@@ -423,9 +423,9 @@ void zfcp_qdio_close(struct zfcp_adapter *adapter)
 
 	/* clear QDIOUP flag, thus do_QDIO is not called during qdio_shutdown */
 	req_q = &adapter->req_q;
-	spin_lock(&req_q->lock);
+	spin_lock_bh(&req_q->lock);
 	atomic_clear_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status);
-	spin_unlock(&req_q->lock);
+	spin_unlock_bh(&req_q->lock);
 
 	qdio_shutdown(adapter->ccw_device, QDIO_FLAG_CLEANUP_USING_CLEAR);
 

drivers/scsi/Kconfig

@@ -63,7 +63,7 @@ comment "SCSI support type (disk, tape, CD-ROM)"
 config BLK_DEV_SD
 	tristate "SCSI disk support"
 	depends on SCSI
-	select CRC_T10DIF
+	select CRC_T10DIF if BLK_DEV_INTEGRITY
 	---help---
 	  If you want to use SCSI hard disks, Fibre Channel disks,
 	  Serial ATA (SATA) or Parallel ATA (PATA) hard disks,

drivers/scsi/device_handler/scsi_dh_alua.c

@@ -425,7 +425,7 @@ static int alua_check_sense(struct scsi_device *sdev,
 			/*
 			 * LUN Not Accessible - ALUA state transition
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0b)
 			/*
 			 * LUN Not Accessible -- Target port in standby state
@@ -447,18 +447,18 @@ static int alua_check_sense(struct scsi_device *sdev,
 			/*
 			 * Power On, Reset, or Bus Device Reset, just retry.
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06) {
 			/*
 			 * ALUA state changed
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		}
 		if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07) {
 			/*
 			 * Implicit ALUA state transition failed
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		}
 		break;
 	}
@@ -490,7 +490,7 @@ static int alua_stpg(struct scsi_device *sdev, int state,
 		if (!err)
 			return SCSI_DH_IO;
 		err = alua_check_sense(sdev, &sense_hdr);
-		if (retry > 0 && err == NEEDS_RETRY) {
+		if (retry > 0 && err == ADD_TO_MLQUEUE) {
 			retry--;
 			goto retry;
 		}
@@ -535,7 +535,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
 			return SCSI_DH_IO;
 
 		err = alua_check_sense(sdev, &sense_hdr);
-		if (err == NEEDS_RETRY)
+		if (err == ADD_TO_MLQUEUE)
 			goto retry;
 		sdev_printk(KERN_INFO, sdev,
 			    "%s: rtpg sense code %02x/%02x/%02x\n",

drivers/scsi/device_handler/scsi_dh_emc.c

@@ -439,7 +439,7 @@ static int clariion_check_sense(struct scsi_device *sdev,
 			 * Unit Attention Code. This is the first IO
 			 * to the new path, so just retry.
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		break;
 	}
 
@@ -514,7 +514,7 @@ static int clariion_send_inquiry(struct scsi_device *sdev,
 			return SCSI_DH_IO;
 
 		err = clariion_check_sense(sdev, &sshdr);
-		if (retry > 0 && err == NEEDS_RETRY) {
+		if (retry > 0 && err == ADD_TO_MLQUEUE) {
 			retry--;
 			goto retry;
 		}

drivers/scsi/device_handler/scsi_dh_rdac.c

@@ -551,7 +551,7 @@ static int rdac_check_sense(struct scsi_device *sdev,
 			 *
 			 * Just retry and wait.
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		break;
 	case ILLEGAL_REQUEST:
 		if (sense_hdr->asc == 0x94 && sense_hdr->ascq == 0x01) {
@@ -568,7 +568,7 @@ static int rdac_check_sense(struct scsi_device *sdev,
 			/*
 			 * Power On, Reset, or Bus Device Reset, just retry.
 			 */
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		break;
 	}
 	/* success just means we do not care what scsi-ml does */

drivers/scsi/scsi_error.c

@@ -391,7 +391,7 @@ static int scsi_check_sense(struct scsi_cmnd *scmd)
 
 	case HARDWARE_ERROR:
 		if (scmd->device->retry_hwerror)
-			return NEEDS_RETRY;
+			return ADD_TO_MLQUEUE;
 		else
 			return SUCCESS;
 

drivers/scsi/scsi_scan.c

@@ -1080,7 +1080,8 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
 	 * PDT=1Fh none (no FDD connected to the requested logical unit)
 	 */
 	if (((result[0] >> 5) == 1 || starget->pdt_1f_for_no_lun) &&
-	     (result[0] & 0x1f) == 0x1f) {
+	    (result[0] & 0x1f) == 0x1f &&
+	    !scsi_is_wlun(lun)) {
 		SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
 					"scsi scan: peripheral device type"
 					" of 31, no device added\n"));

include/scsi/scsi.h

@@ -308,6 +308,20 @@ struct scsi_lun {
 	__u8 scsi_lun[8];
 };
 
+/*
+ * The Well Known LUNS (SAM-3) in our int representation of a LUN
+ */
+#define SCSI_W_LUN_BASE 0xc100
+#define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1)
+#define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2)
+#define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3)
+
+static inline int scsi_is_wlun(unsigned int lun)
+{
+	return (lun & 0xff00) == SCSI_W_LUN_BASE;
+}
+
+
 /*
  *  MESSAGE CODES
  */