MIPS: Loongson64: Fix boot failure after dropping boot_mem_map

From commit a94e4f24 ("MIPS: init: Drop boot_mem_map") onwards,
add_memory_region() is handled by memblock_add()/memblock_reserve()
directly and all bootmem API should be converted to memblock API.
Otherwise it will lead to boot failure, especially in the NUMA case
because add_memory_region lose the node_id information.

Fixes: a94e4f24 ("MIPS: init: Drop boot_mem_map")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
[paul.burton@mips.com:
  - Invert node_id check to de-indent the switch statement & avoid lines
    over 80 characters.
  - Fixup commit reference in commit message.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-mips@vger.kernel.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>

arch/mips/loongson64/common/mem.c

@@ -3,6 +3,7 @@
  */
 #include <linux/fs.h>
 #include <linux/fcntl.h>
+#include <linux/memblock.h>
 #include <linux/mm.h>
 
 #include <asm/bootinfo.h>
@@ -64,26 +65,24 @@ void __init prom_init_memory(void)
 		node_id = loongson_memmap->map[i].node_id;
 		mem_type = loongson_memmap->map[i].mem_type;
 
-		if (node_id == 0) {
+		if (node_id != 0)
+			continue;
+
 		switch (mem_type) {
 		case SYSTEM_RAM_LOW:
-				add_memory_region(loongson_memmap->map[i].mem_start,
-					(u64)loongson_memmap->map[i].mem_size << 20,
-					BOOT_MEM_RAM);
+			memblock_add(loongson_memmap->map[i].mem_start,
+				(u64)loongson_memmap->map[i].mem_size << 20);
 			break;
 		case SYSTEM_RAM_HIGH:
-				add_memory_region(loongson_memmap->map[i].mem_start,
-					(u64)loongson_memmap->map[i].mem_size << 20,
-					BOOT_MEM_RAM);
+			memblock_add(loongson_memmap->map[i].mem_start,
+				(u64)loongson_memmap->map[i].mem_size << 20);
 			break;
 		case SYSTEM_RAM_RESERVED:
-				add_memory_region(loongson_memmap->map[i].mem_start,
-					(u64)loongson_memmap->map[i].mem_size << 20,
-					BOOT_MEM_RESERVED);
+			memblock_reserve(loongson_memmap->map[i].mem_start,
+				(u64)loongson_memmap->map[i].mem_size << 20);
 			break;
 		}
 	}
-	}
 }
 
 #endif /* CONFIG_LEFI_FIRMWARE_INTERFACE */

arch/mips/loongson64/loongson-3/numa.c

@@ -142,8 +142,6 @@ static void __init szmem(unsigned int node)
 				(u32)node_id, mem_type, mem_start, mem_size);
 			pr_info("       start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
 				start_pfn, end_pfn, num_physpages);
-			add_memory_region((node_id << 44) + mem_start,
-				(u64)mem_size << 20, BOOT_MEM_RAM);
 			memblock_add_node(PFN_PHYS(start_pfn),
 				PFN_PHYS(end_pfn - start_pfn), node);
 			break;
@@ -156,16 +154,12 @@ static void __init szmem(unsigned int node)
 				(u32)node_id, mem_type, mem_start, mem_size);
 			pr_info("       start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
 				start_pfn, end_pfn, num_physpages);
-			add_memory_region((node_id << 44) + mem_start,
-				(u64)mem_size << 20, BOOT_MEM_RAM);
 			memblock_add_node(PFN_PHYS(start_pfn),
 				PFN_PHYS(end_pfn - start_pfn), node);
 			break;
 		case SYSTEM_RAM_RESERVED:
 			pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
 				(u32)node_id, mem_type, mem_start, mem_size);
-			add_memory_region((node_id << 44) + mem_start,
-				(u64)mem_size << 20, BOOT_MEM_RESERVED);
 			memblock_reserve(((node_id << 44) + mem_start),
 				mem_size << 20);
 			break;
@@ -191,8 +185,6 @@ static void __init node_mem_init(unsigned int node)
 	NODE_DATA(node)->node_start_pfn = start_pfn;
 	NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn;
 
-	free_bootmem_with_active_regions(node, end_pfn);
-
 	if (node == 0) {
 		/* kernel end address */
 		unsigned long kernel_end_pfn = PFN_UP(__pa_symbol(&_end));
@@ -209,8 +201,6 @@ static void __init node_mem_init(unsigned int node)
 			memblock_reserve((node_addrspace_offset | 0xfe000000),
 					 32 << 20);
 	}
-
-	sparse_memory_present_with_active_regions(node);
 }
 
 static __init void prom_meminit(void)
@@ -227,6 +217,7 @@ static __init void prom_meminit(void)
 			cpumask_clear(&__node_data[(node)]->cpumask);
 		}
 	}
+	memblocks_present();
 	max_low_pfn = PHYS_PFN(memblock_end_of_DRAM());
 
 	for (cpu = 0; cpu < loongson_sysconf.nr_cpus; cpu++) {