Commit 2b83a8d6 authored by Linus Torvalds's avatar Linus Torvalds

Merge bk://kernel.bkbits.net/davem/net-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux
parents 74c23b08 1443a2ec
......@@ -166,8 +166,9 @@ count on these devices by calling pci_dev_put().
~~~~~~~~~~~~~~~~~~~
Before you do anything with the device you've found, you need to enable
it by calling pci_enable_device() which enables I/O and memory regions of
the device, assigns missing resources if needed and wakes up the device
if it was in suspended state. Please note that this function can fail.
the device, allocates an IRQ if necessary, assigns missing resources if
needed and wakes up the device if it was in suspended state. Please note
that this function can fail.
If you want to use the device in bus mastering mode, call pci_set_master()
which enables the bus master bit in PCI_COMMAND register and also fixes
......
......@@ -286,11 +286,11 @@ wake event from:
+------------------+
| Bit | State |
+------------------+
| 15 | D0 |
| 14 | D1 |
| 11 | D0 |
| 12 | D1 |
| 13 | D2 |
| 12 | D3hot |
| 11 | D3cold |
| 14 | D3hot |
| 15 | D3cold |
+------------------+
A device can use this to enable wake events:
......
......@@ -2,7 +2,6 @@
# Makefile for the linux kernel.
#
obj-y += platform.o
obj-$(CONFIG_ARM_AMBA) += amba.o
obj-$(CONFIG_ICST525) += icst525.o
obj-$(CONFIG_SA1111) += sa1111.o
......
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/init.h>
int __init platform_add_device(struct platform_device *dev)
{
int i;
for (i = 0; i < dev->num_resources; i++) {
struct resource *r = &dev->resource[i];
r->name = dev->dev.bus_id;
if (r->flags & IORESOURCE_MEM &&
request_resource(&iomem_resource, r)) {
printk(KERN_ERR
"%s%d: failed to claim resource %d\n",
dev->name, dev->id, i);
break;
}
}
if (i == dev->num_resources)
platform_device_register(dev);
return 0;
}
int __init platform_add_devices(struct platform_device **devs, int num)
{
int i;
for (i = 0; i < num; i++)
platform_add_device(devs[i]);
return 0;
}
......@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
......@@ -52,43 +53,22 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE_PB is not set
#
# CLPS711X/EP721X Implementations
#
#
# Epxa10db
#
#
# Footbridge Implementations
#
#
# IOP3xx Implementation Options
#
# CONFIG_ARCH_IOP310 is not set
# CONFIG_ARCH_IOP321 is not set
#
# IOP3xx Chipset Features
#
#
# Intel PXA2xx Implementations
#
......@@ -98,34 +78,6 @@ CONFIG_MACH_MAINSTONE=y
CONFIG_PXA27x=y
CONFIG_IWMMXT=y
#
# SA11x0 Implementations
#
#
# TI OMAP Implementations
#
#
# OMAP Core Type
#
#
# OMAP Board Type
#
#
# OMAP Feature Selections
#
#
# S3C2410 Implementations
#
#
# LH7A40X Implementations
#
#
# Processor Type
#
......@@ -163,6 +115,7 @@ CONFIG_PCMCIA_PXA2XX=y
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
# CONFIG_FPE_FASTFPE is not set
# CONFIG_VFP is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
......@@ -170,6 +123,7 @@ CONFIG_BINFMT_ELF=y
#
# Generic Driver Options
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_PM is not set
......@@ -394,7 +348,6 @@ CONFIG_BLK_DEV_IDE=y
#
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECS=y
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
......@@ -406,6 +359,7 @@ CONFIG_BLK_DEV_IDECS=y
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
......@@ -571,6 +525,7 @@ CONFIG_EXT2_FS=y
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
# CONFIG_NTFS_FS is not set
#
......@@ -622,7 +577,6 @@ CONFIG_SUNRPC=y
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
......@@ -658,6 +612,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -681,7 +636,10 @@ CONFIG_NLS_ISO8859_1=y
#
# Graphics support
#
# CONFIG_FB is not set
CONFIG_FB=y
CONFIG_FB_PXA=y
# CONFIG_FB_PXA_PARAMETERS is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
......@@ -689,6 +647,19 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
......
......@@ -11,6 +11,7 @@
*/
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <asm/hardware.h>
......@@ -174,7 +175,7 @@ static struct irqaction ebsa110_timer_irq = {
/*
* Set up timer interrupt.
*/
void __init ebsa110_time_init(void)
static void __init ebsa110_init_time(void)
{
/*
* Timer 1, mode 2, LSB/MSB
......
/*
* linux/include/asm-arm/arch-ebsa110/time.h
*
* Copyright (C) 1996,1997,1998 Russell King.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* No real time clock on the evalulation board!
*
* Changelog:
* 10-Oct-1996 RMK Created
* 04-Dec-1997 RMK Updated for new arch/arm/kernel/time.c
* 07-Aug-1998 RMK Updated for arch/arm/kernel/leds.c
* 28-Dec-1998 APH Made leds code optional
*/
#include <asm/leds.h>
#include <asm/io.h>
extern unsigned long (*gettimeoffset)(void);
#define PIT_CTRL (PIT_BASE + 0x0d)
#define PIT_T2 (PIT_BASE + 0x09)
#define PIT_T1 (PIT_BASE + 0x05)
#define PIT_T0 (PIT_BASE + 0x01)
/*
* This is the rate at which your MCLK signal toggles (in Hz)
* This was measured on a 10 digit frequency counter sampling
* over 1 second.
*/
#define MCLK 47894000
/*
* This is the rate at which the PIT timers get clocked
*/
#define CLKBY7 (MCLK / 7)
/*
* This is the counter value. We tick at 200Hz on this platform.
*/
#define COUNT ((CLKBY7 + (HZ / 2)) / HZ)
/*
* Get the time offset from the system PIT. Note that if we have missed an
* interrupt, then the PIT counter will roll over (ie, be negative).
* This actually works out to be convenient.
*/
static unsigned long ebsa110_gettimeoffset(void)
{
unsigned long offset, count;
__raw_writeb(0x40, PIT_CTRL);
count = __raw_readb(PIT_T1);
count |= __raw_readb(PIT_T1) << 8;
/*
* If count > COUNT, make the number negative.
*/
if (count > COUNT)
count |= 0xffff0000;
offset = COUNT;
offset -= count;
/*
* `offset' is in units of timer counts. Convert
* offset to units of microseconds.
*/
offset = offset * (1000000 / HZ) / COUNT;
return offset;
}
static irqreturn_t
timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
u32 count;
/* latch and read timer 1 */
__raw_writeb(0x40, PIT_CTRL);
count = __raw_readb(PIT_T1);
count |= __raw_readb(PIT_T1) << 8;
count += COUNT;
__raw_writeb(count & 0xff, PIT_T1);
__raw_writeb(count >> 8, PIT_T1);
do_leds();
do_timer(regs);
do_profile(regs);
return IRQ_HANDLED;
}
/*
* Set up timer interrupt.
*/
void __init time_init(void)
{
/*
* Timer 1, mode 2, LSB/MSB
*/
__raw_writeb(0x70, PIT_CTRL);
__raw_writeb(COUNT & 0xff, PIT_T1);
__raw_writeb(COUNT >> 8, PIT_T1);
gettimeoffset = ebsa110_gettimeoffset;
timer_irq.handler = timer_interrupt;
setup_irq(IRQ_EBSA110_TIMER0, &timer_irq);
}
......@@ -275,7 +275,7 @@ void __init footbridge_init_time(void)
*CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD | TIMER_CNTL_DIV16;
footbridge_timer_irq.name = "Timer1 Timer Tick";
footbrdige_timer_irq.handler = timer1_interrupt;
footbridge_timer_irq.handler = timer1_interrupt;
setup_irq(IRQ_TIMER1, &footbridge_timer_irq);
......@@ -289,8 +289,8 @@ void __init footbridge_init_time(void)
gettimeoffset = isa_gettimeoffset;
footbridge_timer_irq.name = "ISA Timer Tick";
footbrdige_timer_irq.handler = isa_timer_interrupt;
footbridge_timer_irq.handler = isa_timer_interrupt;
setup_irq(IRQ_ISA, &footbridge_timer_irq);
setup_irq(IRQ_ISA_TIMER, &footbridge_timer_irq);
}
}
......@@ -12,12 +12,17 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/hardware/amba.h>
#include <asm/arch/cm.h>
#include <asm/system.h>
#include <asm/leds.h>
#include <asm/mach/time.h>
static struct amba_device rtc_device = {
.dev = {
......@@ -127,3 +132,137 @@ void cm_control(u32 mask, u32 set)
}
EXPORT_SYMBOL(cm_control);
/*
* Where is the timer (VA)?
*/
#define TIMER0_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000000)
#define TIMER1_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000100)
#define TIMER2_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000200)
#define VA_IC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE)
/*
* How long is the timer interval?
*/
#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10)
#if TIMER_INTERVAL >= 0x100000
#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC)
#elif TIMER_INTERVAL >= 0x10000
#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC)
#else
#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
#endif
/*
* What does it look like?
*/
typedef struct TimerStruct {
unsigned long TimerLoad;
unsigned long TimerValue;
unsigned long TimerControl;
unsigned long TimerClear;
} TimerStruct_t;
extern unsigned long (*gettimeoffset)(void);
static unsigned long timer_reload;
/*
* Returns number of ms since last clock interrupt. Note that interrupts
* will have been disabled by do_gettimeoffset()
*/
static unsigned long integrator_gettimeoffset(void)
{
volatile TimerStruct_t *timer1 = (TimerStruct_t *)TIMER1_VA_BASE;
unsigned long ticks1, ticks2, status;
/*
* Get the current number of ticks. Note that there is a race
* condition between us reading the timer and checking for
* an interrupt. We get around this by ensuring that the
* counter has not reloaded between our two reads.
*/
ticks2 = timer1->TimerValue & 0xffff;
do {
ticks1 = ticks2;
status = __raw_readl(VA_IC_BASE + IRQ_RAW_STATUS);
ticks2 = timer1->TimerValue & 0xffff;
} while (ticks2 > ticks1);
/*
* Number of ticks since last interrupt.
*/
ticks1 = timer_reload - ticks2;
/*
* Interrupt pending? If so, we've reloaded once already.
*/
if (status & (1 << IRQ_TIMERINT1))
ticks1 += timer_reload;
/*
* Convert the ticks to usecs
*/
return TICKS2USECS(ticks1);
}
/*
* IRQ handler for the timer
*/
static irqreturn_t
integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE;
// ...clear the interrupt
timer1->TimerClear = 1;
timer_tick(regs);
return IRQ_HANDLED;
}
static struct irqaction integrator_timer_irq = {
.name = "Integrator Timer Tick",
.flags = SA_INTERRUPT,
.handler = integrator_timer_interrupt
};
/*
* Set up timer interrupt, and return the current time in seconds.
*/
void __init integrator_time_init(unsigned long reload, unsigned int ctrl)
{
volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE;
volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE;
volatile TimerStruct_t *timer2 = (volatile TimerStruct_t *)TIMER2_VA_BASE;
unsigned int timer_ctrl = 0x80 | 0x40; /* periodic */
timer_reload = reload;
timer_ctrl |= ctrl;
if (timer_reload > 0x100000) {
timer_reload >>= 8;
timer_ctrl |= 0x08; /* /256 */
} else if (timer_reload > 0x010000) {
timer_reload >>= 4;
timer_ctrl |= 0x04; /* /16 */
}
/*
* Initialise to a known state (all timers off)
*/
timer0->TimerControl = 0;
timer1->TimerControl = 0;
timer2->TimerControl = 0;
timer1->TimerLoad = timer_reload;
timer1->TimerValue = timer_reload;
timer1->TimerControl = timer_ctrl;
/*
* Make irqs happen for the system timer
*/
setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);
gettimeoffset = integrator_gettimeoffset;
}
......@@ -256,7 +256,7 @@ static void __init ap_init(void)
unsigned long sc_dec;
int i;
platform_add_device(&cfi_flash_device);
platform_device_register(&cfi_flash_device);
sc_dec = readl(VA_SC_BASE + INTEGRATOR_SC_DEC_OFFSET);
for (i = 0; i < 4; i++) {
......
......@@ -419,6 +419,8 @@ static void __init intcp_init(void)
}
}
#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable */
static void __init intcp_init_time(void)
{
integrator_time_init(1000000 / HZ, TIMER_CTRL_IE);
......
......@@ -10,16 +10,9 @@
#include <linux/kernel.h>
#include <linux/time.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/time.h>
#define RTC_DR (IO_ADDRESS(INTEGRATOR_RTC_BASE) + 0)
#define RTC_MR (IO_ADDRESS(INTEGRATOR_RTC_BASE) + 4)
......@@ -51,140 +44,3 @@ static int integrator_rtc_init(void)
}
__initcall(integrator_rtc_init);
/*
* Where is the timer (VA)?
*/
#define TIMER0_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000000)
#define TIMER1_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000100)
#define TIMER2_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000200)
#define VA_IC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE)
/*
* How long is the timer interval?
*/
#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10)
#if TIMER_INTERVAL >= 0x100000
#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC)
#elif TIMER_INTERVAL >= 0x10000
#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC)
#else
#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
#endif
#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable */
/*
* What does it look like?
*/
typedef struct TimerStruct {
unsigned long TimerLoad;
unsigned long TimerValue;
unsigned long TimerControl;
unsigned long TimerClear;
} TimerStruct_t;
extern unsigned long (*gettimeoffset)(void);
static unsigned long timer_reload;
/*
* Returns number of ms since last clock interrupt. Note that interrupts
* will have been disabled by do_gettimeoffset()
*/
static unsigned long integrator_gettimeoffset(void)
{
volatile TimerStruct_t *timer1 = (TimerStruct_t *)TIMER1_VA_BASE;
unsigned long ticks1, ticks2, status;
/*
* Get the current number of ticks. Note that there is a race
* condition between us reading the timer and checking for
* an interrupt. We get around this by ensuring that the
* counter has not reloaded between our two reads.
*/
ticks2 = timer1->TimerValue & 0xffff;
do {
ticks1 = ticks2;
status = __raw_readl(VA_IC_BASE + IRQ_RAW_STATUS);
ticks2 = timer1->TimerValue & 0xffff;
} while (ticks2 > ticks1);
/*
* Number of ticks since last interrupt.
*/
ticks1 = timer_reload - ticks2;
/*
* Interrupt pending? If so, we've reloaded once already.
*/
if (status & (1 << IRQ_TIMERINT1))
ticks1 += timer_reload;
/*
* Convert the ticks to usecs
*/
return TICKS2USECS(ticks1);
}
/*
* IRQ handler for the timer
*/
static irqreturn_t
integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE;
// ...clear the interrupt
timer1->TimerClear = 1;
timer_tick(regs);
return IRQ_HANDLED;
}
static struct irqaction integrator_timer_irq = {
.name = "Integrator Timer Tick",
.flags = SA_INTERRUPT,
.handler = integrator_timer_interrupt
};
/*
* Set up timer interrupt, and return the current time in seconds.
*/
void __init integrator_time_init(unsigned long reload, unsigned int ctrl)
{
volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE;
volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE;
volatile TimerStruct_t *timer2 = (volatile TimerStruct_t *)TIMER2_VA_BASE;
unsigned int timer_ctrl = 0x80 | 0x40; /* periodic */
timer_reload = reload;
timer_ctrl |= ctrl;
if (timer_reload > 0x100000) {
timer_reload >>= 8;
timer_ctrl |= 0x08; /* /256 */
} else if (timer_reload > 0x010000) {
timer_reload >>= 4;
timer_ctrl |= 0x04; /* /16 */
}
/*
* Initialise to a known state (all timers off)
*/
timer0->TimerControl = 0;
timer1->TimerControl = 0;
timer2->TimerControl = 0;
timer1->TimerLoad = timer_reload;
timer1->TimerValue = timer_reload;
timer1->TimerControl = timer_ctrl;
/*
* Make irqs happen for the system timer
*/
setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);
gettimeoffset = integrator_gettimeoffset;
}
......@@ -81,40 +81,6 @@ static struct bus_type omap_bus_types[OMAP_NR_BUSES] = {
},
};
#ifdef CONFIG_ARCH_OMAP1510
/*
* NOTE: This code _should_ go somewhere else. But let's wait for the
* dma-mapping code to settle down first.
*/
/*
* Test for Local Bus device in order to do address translation between
* dma_handle and Local Bus address.
*/
inline int dmadev_uses_omap_lbus(struct device * dev)
{
if (dev == NULL || !cpu_is_omap1510())
return 0;
return dev->bus == &omap_bus_types[OMAP_BUS_LBUS] ? 1 : 0;
}
/*
* Translate bus address to Local Bus address for dma-mapping
*/
inline int dmadev_to_lbus(dma_addr_t addr)
{
return bus_to_lbus(addr);
}
/*
* Translate Local Bus address to bus address for dma-mapping
*/
inline int lbus_to_dmadev(dma_addr_t addr)
{
return lbus_to_bus(addr);
}
#endif
static int omap_bus_match(struct device *dev, struct device_driver *drv)
{
struct omap_dev *omapdev = OMAP_DEV(dev);
......@@ -278,8 +244,3 @@ EXPORT_SYMBOL(omap_driver_unregister);
EXPORT_SYMBOL(omap_device_register);
EXPORT_SYMBOL(omap_device_unregister);
#ifdef CONFIG_ARCH_OMAP1510
EXPORT_SYMBOL(dmadev_uses_omap_lbus);
EXPORT_SYMBOL(dmadev_to_lbus);
EXPORT_SYMBOL(lbus_to_dmadev);
#endif
......@@ -28,7 +28,12 @@
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <asm/system.h>
#include <asm/hardware.h>
#include <asm/io.h>
......
......@@ -18,6 +18,7 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/bitops.h>
#include <linux/fb.h>
#include <asm/types.h>
#include <asm/setup.h>
......@@ -31,6 +32,7 @@
#include <asm/mach/irq.h>
#include <asm/arch/mainstone.h>
#include <asm/arch/pxafb.h>
#include "generic.h"
......@@ -116,9 +118,66 @@ static struct platform_device smc91x_device = {
.resource = smc91x_resources,
};
static void mainstone_backlight_power(int on)
{
if (on) {
pxa_gpio_mode(GPIO16_PWM0_MD);
pxa_set_cken(CKEN0_PWM0, 1);
PWM_CTRL0 = 0;
PWM_PWDUTY0 = 0x3ff;
PWM_PERVAL0 = 0x3ff;
} else {
PWM_CTRL0 = 0;
PWM_PWDUTY0 = 0x0;
PWM_PERVAL0 = 0x3FF;
pxa_set_cken(CKEN0_PWM0, 0);
}
}
static struct pxafb_mach_info toshiba_ltm04c380k __initdata = {
.pixclock = 50000,
.xres = 640,
.yres = 480,
.bpp = 16,
.hsync_len = 1,
.left_margin = 0x9f,
.right_margin = 1,
.vsync_len = 44,
.upper_margin = 0,
.lower_margin = 0,
.sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
.lccr0 = LCCR0_Act,
.lccr3 = LCCR3_PCP,
.pxafb_backlight_power = mainstone_backlight_power,
};
static struct pxafb_mach_info toshiba_ltm035a776c __initdata = {
.pixclock = 110000,
.xres = 240,
.yres = 320,
.bpp = 16,
.hsync_len = 4,
.left_margin = 8,
.right_margin = 20,
.vsync_len = 3,
.upper_margin = 1,
.lower_margin = 10,
.sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
.lccr0 = LCCR0_Act,
.lccr3 = LCCR3_PCP,
.pxafb_backlight_power = mainstone_backlight_power,
};
static void __init mainstone_init(void)
{
platform_add_device(&smc91x_device);
/* reading the BSR might be handy to select LCD type here */
if (0)
set_pxa_fb_info(&toshiba_ltm04c380k);
else
set_pxa_fb_info(&toshiba_ltm035a776c);
}
......
......@@ -503,8 +503,8 @@ static void __init versatile_init(void)
{
int i;
platform_add_device(&versatile_flash_device);
platform_add_device(&smc91x_device);
platform_device_register(&versatile_flash_device);
platform_device_register(&smc91x_device);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
......
......@@ -313,6 +313,22 @@ static __init int disable_smbus(struct dmi_blacklist *d)
return 0;
}
/*
* Work around broken Acer TravelMate 360 Notebooks which assign Cardbus to
* IRQ 11 even though it is actually wired to IRQ 10
*/
static __init int fix_acer_tm360_irqrouting(struct dmi_blacklist *d)
{
#ifdef CONFIG_PCI
extern int acer_tm360_irqrouting;
if (acer_tm360_irqrouting == 0) {
acer_tm360_irqrouting = 1;
printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident);
}
#endif
return 0;
}
/*
* Check for clue free BIOS implementations who use
* the following QA technique
......@@ -799,6 +815,13 @@ static __initdata struct dmi_blacklist dmi_blacklist[]={
NO_MATCH, NO_MATCH
} },
{ fix_acer_tm360_irqrouting, "Acer TravelMate 36x Laptop", {
MATCH(DMI_SYS_VENDOR, "Acer"),
MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
NO_MATCH, NO_MATCH
} },
/*
* Generic per vendor APM settings
*/
......@@ -986,6 +1009,13 @@ static __initdata struct dmi_blacklist dmi_blacklist[]={
MATCH(DMI_BOARD_NAME, "PR-DLS"),
MATCH(DMI_BIOS_VERSION, "ASUS PR-DLS ACPI BIOS Revision 1010"),
MATCH(DMI_BIOS_DATE, "03/21/2003") }},
{ disable_acpi_pci, "Acer TravelMate 36x Laptop", {
MATCH(DMI_SYS_VENDOR, "Acer"),
MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
NO_MATCH, NO_MATCH
} },
#endif
{ NULL, }
......
......@@ -1192,7 +1192,9 @@ __init void arch_init_sched_domains(void)
int j;
cpumask_t nodemask;
struct sched_group *node = &sched_group_nodes[i];
cpus_and(nodemask, node_to_cpumask(i), cpu_possible_map);
cpumask_t node_cpumask = node_to_cpumask(i);
cpus_and(nodemask, node_cpumask, cpu_possible_map);
if (cpus_empty(nodemask))
continue;
......@@ -1228,7 +1230,9 @@ __init void arch_init_sched_domains(void)
for (i = 0; i < MAX_NUMNODES; i++) {
struct sched_group *cpu = &sched_group_nodes[i];
cpumask_t nodemask;
cpus_and(nodemask, node_to_cpumask(i), cpu_possible_map);
cpumask_t node_cpumask = node_to_cpumask(i);
cpus_and(nodemask, node_cpumask, cpu_possible_map);
if (cpus_empty(nodemask))
continue;
......
......@@ -24,6 +24,7 @@
#define PIRQ_VERSION 0x0100
static int broken_hp_bios_irq9;
int acer_tm360_irqrouting;
static struct irq_routing_table *pirq_table;
......@@ -746,6 +747,14 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
r->set(pirq_router_dev, dev, pirq, 11);
}
/* same for Acer Travelmate 360, but with CB and irq 11 -> 10 */
if (acer_tm360_irqrouting && dev->irq == 11 && dev->vendor == PCI_VENDOR_ID_O2) {
pirq = 0x68;
mask = 0x400;
dev->irq = r->get(pirq_router_dev, dev, pirq);
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
}
/*
* Find the best IRQ to assign: use the one
* reported by the device if possible.
......
......@@ -7,10 +7,10 @@
#include <asm/bitops.h>
#include <asm/byteorder.h>
unsigned long find_next_zero_bit(unsigned long *addr, unsigned long size,
unsigned long find_next_zero_bit(const unsigned long *addr, unsigned long size,
unsigned long offset)
{
unsigned long *p = addr + (offset >> 6);
const unsigned long *p = addr + (offset >> 6);
unsigned long result = offset & ~63UL;
unsigned long tmp;
......@@ -48,10 +48,10 @@ unsigned long find_next_zero_bit(unsigned long *addr, unsigned long size,
EXPORT_SYMBOL(find_next_zero_bit);
unsigned long find_next_bit(unsigned long *addr, unsigned long size,
unsigned long find_next_bit(const unsigned long *addr, unsigned long size,
unsigned long offset)
{
unsigned long *p = addr + (offset >> 6);
const unsigned long *p = addr + (offset >> 6);
unsigned long result = offset & ~63UL;
unsigned long tmp;
......@@ -106,10 +106,10 @@ static inline unsigned int ext2_ffz(unsigned int x)
return rc;
}
unsigned long find_next_zero_le_bit(unsigned long *addr, unsigned long size,
unsigned long find_next_zero_le_bit(const unsigned long *addr, unsigned long size,
unsigned long offset)
{
unsigned int *p = ((unsigned int *)addr) + (offset >> 5);
const unsigned int *p = ((const unsigned int *)addr) + (offset >> 5);
unsigned int result = offset & ~31;
unsigned int tmp;
......
......@@ -1058,6 +1058,34 @@ static int is_bridge(struct pci_func * func)
hotplug controller logic
*/
static void set_slot_off(struct controller *ctrl, struct slot * pslot)
{
/* Wait for exclusive access to hardware */
down(&ctrl->crit_sect);
/* turn off slot, turn on Amber LED, turn off Green LED */
if (pslot->hpc_ops->power_off_slot(pslot)) {
err("%s: Issue of Slot Power Off command failed\n", __FUNCTION__);
up(&ctrl->crit_sect);
return;
}
wait_for_ctrl_irq (ctrl);
pslot->hpc_ops->green_led_off(pslot);
wait_for_ctrl_irq (ctrl);
/* turn on Amber LED */
if (pslot->hpc_ops->set_attention_status(pslot, 1)) {
err("%s: Issue of Set Attention Led command failed\n", __FUNCTION__);
up(&ctrl->crit_sect);
return;
}
wait_for_ctrl_irq (ctrl);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
}
/**
* board_added - Called after a board has been added to the system.
......@@ -1071,7 +1099,7 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl)
u8 hp_slot;
int index;
u32 temp_register = 0xFFFFFFFF;
u32 retval, rc = 0;
u32 rc = 0;
struct pci_func *new_func = NULL;
struct slot *p_slot;
struct resource_lists res_lists;
......@@ -1086,8 +1114,10 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl)
/* Power on slot */
rc = p_slot->hpc_ops->power_on_slot(p_slot);
if (rc)
if (rc) {
up(&ctrl->crit_sect);
return -1;
}
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
......@@ -1105,11 +1135,12 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl)
wait_for_ctrl_irq (ctrl);
dbg("%s: afterlong_delay\n", __FUNCTION__);
/* Make this to check for link training status */
/* Check link training status */
rc = p_slot->hpc_ops->check_lnk_status(ctrl);
if (rc) {
err("%s: Failed to check link status\n", __FUNCTION__);
return -1;
set_slot_off(ctrl, p_slot);
return rc;
}
dbg("%s: func status = %x\n", __FUNCTION__, func->status);
......@@ -1159,36 +1190,7 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl)
pciehp_resource_sort_and_combine(&(ctrl->bus_head));
if (rc) {
/* Wait for exclusive access to hardware */
down(&ctrl->crit_sect);
/* turn off slot, turn on Amber LED, turn off Green LED */
retval = p_slot->hpc_ops->power_off_slot(p_slot);
/* In PCI Express, just power off slot */
if (retval) {
err("%s: Issue of Slot Power Off command failed\n", __FUNCTION__);
return retval;
}
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
p_slot->hpc_ops->green_led_off(p_slot);
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
/* turn on Amber LED */
retval = p_slot->hpc_ops->set_attention_status(p_slot, 1);
if (retval) {
err("%s: Issue of Set Attention Led command failed\n", __FUNCTION__);
return retval;
}
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
set_slot_off(ctrl, p_slot);
return rc;
}
pciehp_save_slot_config(ctrl, func);
......@@ -1223,37 +1225,8 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl)
up(&ctrl->crit_sect);
} else {
/* Wait for exclusive access to hardware */
down(&ctrl->crit_sect);
/* turn off slot, turn on Amber LED, turn off Green LED */
retval = p_slot->hpc_ops->power_off_slot(p_slot);
/* In PCI Express, just power off slot */
if (retval) {
err("%s: Issue of Slot Power Off command failed\n", __FUNCTION__);
return retval;
}
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
p_slot->hpc_ops->green_led_off(p_slot);
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
/* turn on Amber LED */
retval = p_slot->hpc_ops->set_attention_status(p_slot, 1);
if (retval) {
err("%s: Issue of Set Attention Led command failed\n", __FUNCTION__);
return retval;
}
/* Wait for the command to complete */
wait_for_ctrl_irq (ctrl);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
return rc;
set_slot_off(ctrl, p_slot);
return -1;
}
return 0;
}
......@@ -1320,6 +1293,7 @@ static u32 remove_board(struct pci_func *func, struct controller *ctrl)
rc = p_slot->hpc_ops->power_off_slot(p_slot);
if (rc) {
err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
up(&ctrl->crit_sect);
return rc;
}
/* Wait for the command to complete */
......@@ -1406,7 +1380,6 @@ static void pciehp_pushbutton_thread(unsigned long slot)
{
struct slot *p_slot = (struct slot *) slot;
u8 getstatus;
int rc;
pushbutton_pending = 0;
......@@ -1420,23 +1393,7 @@ static void pciehp_pushbutton_thread(unsigned long slot)
p_slot->state = POWEROFF_STATE;
dbg("In power_down_board, b:d(%x:%x)\n", p_slot->bus, p_slot->device);
if (pciehp_disable_slot(p_slot)) {
/* Wait for exclusive access to hardware */
down(&p_slot->ctrl->crit_sect);
/* Turn on the Attention LED */
rc = p_slot->hpc_ops->set_attention_status(p_slot, 1);
if (rc) {
err("%s: Issue of Set Atten Indicator On command failed\n", __FUNCTION__);
return;
}
/* Wait for the command to complete */
wait_for_ctrl_irq (p_slot->ctrl);
/* Done with exclusive hardware access */
up(&p_slot->ctrl->crit_sect);
}
pciehp_disable_slot(p_slot);
p_slot->state = STATIC_STATE;
} else {
p_slot->state = POWERON_STATE;
......@@ -1446,15 +1403,6 @@ static void pciehp_pushbutton_thread(unsigned long slot)
/* Wait for exclusive access to hardware */
down(&p_slot->ctrl->crit_sect);
/* Turn off the green LED */
rc = p_slot->hpc_ops->set_attention_status(p_slot, 1);
if (rc) {
err("%s: Issue of Set Atten Indicator On command failed\n", __FUNCTION__);
return;
}
/* Wait for the command to complete */
wait_for_ctrl_irq (p_slot->ctrl);
p_slot->hpc_ops->green_led_off(p_slot);
/* Wait for the command to complete */
......@@ -1664,7 +1612,10 @@ static void interrupt_event_handler(struct controller *ctrl)
down(&ctrl->crit_sect);
p_slot->hpc_ops->set_attention_status(p_slot, 1);
wait_for_ctrl_irq (ctrl);
p_slot->hpc_ops->green_led_off(p_slot);
wait_for_ctrl_irq (ctrl);
/* Done with exclusive hardware access */
up(&ctrl->crit_sect);
......@@ -1701,21 +1652,21 @@ int pciehp_enable_slot(struct slot *p_slot)
if (rc || !getstatus) {
info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
return 0;
return 1;
}
rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (rc || getstatus) {
info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
return 0;
return 1;
}
rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (rc || getstatus) {
info("%s: already enabled on slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
return 0;
return 1;
}
up(&p_slot->ctrl->crit_sect);
......@@ -1788,21 +1739,21 @@ int pciehp_disable_slot(struct slot *p_slot)
if (ret || !getstatus) {
info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
return 0;
return 1;
}
ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (ret || getstatus) {
info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
return 0;
return 1;
}
ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (ret || !getstatus) {
info("%s: already disabled slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
return 0;
return 1;
}
up(&p_slot->ctrl->crit_sect);
......
......@@ -349,7 +349,9 @@ static int hpc_check_lnk_status(struct controller *ctrl)
return retval;
}
if ( (lnk_status & (LNK_TRN | LNK_TRN_ERR)) == 0x0C00) {
dbg("%s: lnk_status = %x\n", __FUNCTION__, lnk_status);
if ( (lnk_status & LNK_TRN) || (lnk_status & LNK_TRN_ERR) ||
!(lnk_status & NEG_LINK_WD)) {
err("%s : Link Training Error occurs \n", __FUNCTION__);
retval = -1;
return retval;
......
......@@ -218,6 +218,10 @@ static void acpi_get__hpp ( struct acpi_bridge *ab)
}
ab->_hpp = kmalloc (sizeof (struct acpi__hpp), GFP_KERNEL);
if (!ab->_hpp) {
err ("acpi_pciehprm:%s alloc for _HPP failed\n", path_name);
goto free_and_return;
}
memset(ab->_hpp, 0, sizeof(struct acpi__hpp));
ab->_hpp->cache_line_size = nui[0];
......@@ -1393,7 +1397,7 @@ static int configure_existing_function(
static int bind_pci_resources_to_slots ( struct controller *ctrl)
{
struct pci_func *func;
struct pci_func *func, new_func;
int busn = ctrl->slot_bus;
int devn, funn;
u32 vid;
......@@ -1411,12 +1415,20 @@ static int bind_pci_resources_to_slots ( struct controller *ctrl)
if (vid != 0xFFFFFFFF) {
dbg("%s: vid = %x\n", __FUNCTION__, vid);
func = pciehp_slot_find(busn, devn, funn);
if (!func)
continue;
if (!func) {
memset(&new_func, 0, sizeof(struct pci_func));
new_func.bus = busn;
new_func.device = devn;
new_func.function = funn;
new_func.is_a_board = 1;
configure_existing_function(ctrl, &new_func);
pciehprm_dump_func_res(&new_func);
} else {
configure_existing_function(ctrl, func);
dbg("aCCF:existing PCI 0x%x Func ResourceDump\n", ctrl->bus);
pciehprm_dump_func_res(func);
}
dbg("aCCF:existing PCI 0x%x Func ResourceDump\n", ctrl->bus);
}
}
}
......
......@@ -276,7 +276,7 @@ static int pciehprm_delete_resource(
static int bind_pci_resources_to_slots ( struct controller *ctrl)
{
struct pci_func *func;
struct pci_func *func, new_func;
int busn = ctrl->slot_bus;
int devn, funn;
u32 vid;
......@@ -297,12 +297,20 @@ static int bind_pci_resources_to_slots ( struct controller *ctrl)
vid, busn, devn, funn);
func = pciehp_slot_find(busn, devn, funn);
dbg("%s: func = %p\n", __FUNCTION__,func);
if (!func)
continue;
if (!func) {
memset(&new_func, 0, sizeof(struct pci_func));
new_func.bus = busn;
new_func.device = devn;
new_func.function = funn;
new_func.is_a_board = 1;
configure_existing_function(ctrl, &new_func);
phprm_dump_func_res(&new_func);
} else {
configure_existing_function(ctrl, func);
dbg("aCCF:existing PCI 0x%x Func ResourceDump\n", ctrl->bus);
phprm_dump_func_res(func);
}
dbg("aCCF:existing PCI 0x%x Func ResourceDump\n", ctrl->bus);
}
}
}
......
......@@ -24,25 +24,6 @@
static DECLARE_MUTEX(rpadlpar_sem);
static inline int is_hotplug_capable(struct device_node *dn)
{
unsigned char *ptr = get_property(dn, "ibm,fw-pci-hot-plug-ctrl", NULL);
return (int) (ptr != NULL);
}
static char *get_node_drc_name(struct device_node *dn)
{
char *ptr = NULL;
int *drc_names;
drc_names = (int *) get_property(dn, "ibm,drc-names", NULL);
if (drc_names)
ptr = (char *) &drc_names[1];
return ptr;
}
static struct device_node *find_php_slot_vio_node(char *drc_name)
{
struct device_node *child;
......@@ -55,7 +36,7 @@ static struct device_node *find_php_slot_vio_node(char *drc_name)
for (child = of_get_next_child(parent, NULL);
child; child = of_get_next_child(parent, child)) {
loc_code = get_property(child, "ibm,loc-code", NULL);
if (loc_code && !strcmp(loc_code, drc_name))
if (loc_code && !strncmp(loc_code, drc_name, strlen(drc_name)))
return child;
}
......@@ -69,7 +50,7 @@ static struct device_node *find_php_slot_pci_node(char *drc_name)
while ((np = of_find_node_by_type(np, "pci")))
if (is_hotplug_capable(np)) {
name = get_node_drc_name(np);
name = rpaphp_get_drc_name(np);
if (name && (!strcmp(drc_name, name)))
break;
}
......@@ -324,6 +305,7 @@ int dlpar_remove_pci_slot(struct slot *slot, char *drc_name)
}
/* Remove pci bus */
if (dlpar_pci_remove_bus(bridge_dev)) {
printk(KERN_ERR "%s: unable to remove pci bus %s\n",
__FUNCTION__, drc_name);
......
......@@ -30,6 +30,9 @@
#include <linux/pci.h>
#include "pci_hotplug.h"
#define HOTPLUG 1
#define EMBEDDED 0
#define DR_INDICATOR 9002
#define DR_ENTITY_SENSE 9003
......@@ -73,6 +76,11 @@ extern int debug;
#define CONFIGURED 1
#define EMPTY 0
struct rpaphp_pci_func {
struct pci_dev *pci_dev;
struct list_head sibling;
};
/*
* struct slot - slot information for each *physical* slot
*/
......@@ -83,14 +91,13 @@ struct slot {
u32 power_domain;
char *name;
char *location;
u8 removable;
struct device_node *dn; /* slot's device_node in OFDT */
/* dn has phb info */
struct pci_dev *bridge; /* slot's pci_dev in pci_devices */
union {
struct pci_dev *pci_dev; /* pci_dev of device in this slot */
/* it will be used for unconfig */
/* NULL if slot is empty */
struct vio_dev *vio_dev; /* vio_dev of the device in this slot */
struct list_head pci_funcs; /* pci_devs in PCI slot */
struct vio_dev *vio_dev; /* vio_dev in VIO slot */
} dev;
u8 dev_type; /* VIO or PCI */
struct hotplug_slot *hotplug_slot;
......@@ -101,6 +108,13 @@ extern struct hotplug_slot_ops rpaphp_hotplug_slot_ops;
extern struct list_head rpaphp_slot_head;
extern int num_slots;
static inline int is_hotplug_capable(struct device_node *dn)
{
unsigned char *ptr = get_property(dn, "ibm,fw-pci-hot-plug-ctrl", NULL);
return (int) (ptr != NULL);
}
/* function prototypes */
/* rpaphp_pci.c */
......@@ -110,10 +124,12 @@ extern int rpaphp_enable_pci_slot(struct slot *slot);
extern int register_pci_slot(struct slot *slot);
extern int rpaphp_unconfig_pci_adapter(struct slot *slot);
extern int rpaphp_get_pci_adapter_status(struct slot *slot, int is_init, u8 * value);
extern struct hotplug_slot *rpaphp_find_hotplug_slot(struct pci_dev *dev);
/* rpaphp_core.c */
extern int rpaphp_add_slot(struct device_node *dn);
extern int rpaphp_remove_slot(struct slot *slot);
extern char *rpaphp_get_drc_name(struct device_node *dn);
/* rpaphp_vio.c */
extern int rpaphp_get_vio_adapter_status(struct slot *slot, int is_init, u8 * value);
......@@ -125,8 +141,8 @@ extern int rpaphp_enable_vio_slot(struct slot *slot);
extern void dealloc_slot_struct(struct slot *slot);
extern struct slot *alloc_slot_struct(struct device_node *dn, int drc_index, char *drc_name, int power_domain);
extern int register_slot(struct slot *slot);
extern int deregister_slot(struct slot *slot);
extern int rpaphp_get_power_status(struct slot *slot, u8 * value);
extern int rpaphp_set_attention_status(struct slot *slot, u8 status);
extern void rpaphp_sysfs_remove_attr_location(struct hotplug_slot *slot);
#endif /* _PPC64PHP_H */
......@@ -54,6 +54,8 @@ MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
void eeh_register_disable_func(int (*)(struct pci_dev *));
module_param(debug, bool, 0644);
static int enable_slot(struct hotplug_slot *slot);
......@@ -63,6 +65,7 @@ static int get_power_status(struct hotplug_slot *slot, u8 * value);
static int get_attention_status(struct hotplug_slot *slot, u8 * value);
static int get_adapter_status(struct hotplug_slot *slot, u8 * value);
static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value);
static int rpaphp_disable_slot(struct pci_dev *dev);
struct hotplug_slot_ops rpaphp_hotplug_slot_ops = {
.owner = THIS_MODULE,
......@@ -89,7 +92,7 @@ static int rpaphp_get_attention_status(struct slot *slot)
*/
static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 value)
{
int retval;
int retval = 0;
struct slot *slot = (struct slot *)hotplug_slot->private;
down(&rpaphp_sem);
......@@ -208,47 +211,53 @@ static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_spe
int rpaphp_remove_slot(struct slot *slot)
{
int retval = 0;
struct hotplug_slot *php_slot = slot->hotplug_slot;
return deregister_slot(slot);
}
list_del(&slot->rpaphp_slot_list);
static int get_dn_properties(struct device_node *dn, int **indexes, int **names,
int **types, int **power_domains)
{
*indexes = (int *) get_property(dn, "ibm,drc-indexes", NULL);
/* &names[1] contains NULL terminated slot names */
*names = (int *) get_property(dn, "ibm,drc-names", NULL);
/* remove "php_location" file */
rpaphp_sysfs_remove_attr_location(php_slot);
/* &types[1] contains NULL terminated slot types */
*types = (int *) get_property(dn, "ibm,drc-types", NULL);
retval = pci_hp_deregister(php_slot);
if (retval)
err("Problem unregistering a slot %s\n", slot->name);
/* power_domains[1...n] are the slot power domains */
*power_domains = (int *) get_property(dn, "ibm,drc-power-domains", NULL);
num_slots--;
if (*indexes && *names && *types && *power_domains)
return (1);
dbg("%s - Exit: rc[%d]\n", __FUNCTION__, retval);
return retval;
return (0);
}
static int is_php_dn(struct device_node *dn, int **indexes, int **names, int **types,
int **power_domains)
{
*indexes = (int *) get_property(dn, "ibm,drc-indexes", NULL);
if (!*indexes)
return 0;
/* &names[1] contains NULL terminated slot names */
*names = (int *) get_property(dn, "ibm,drc-names", NULL);
if (!*names)
return 0;
/* &types[1] contains NULL terminated slot types */
*types = (int *) get_property(dn, "ibm,drc-types", NULL);
if (!*types)
return 0;
/* power_domains[1...n] are the slot power domains */
*power_domains = (int *) get_property(dn,
"ibm,drc-power-domains", NULL);
if (!*power_domains)
return 0;
if (strcmp(dn->name, "pci") == 0 &&
!get_property(dn, "ibm,fw-pci-hot-plug-ctrl", NULL))
return 0;
return 1;
if (!is_hotplug_capable(dn))
return (0);
if (!get_dn_properties(dn, indexes, names, types, power_domains))
return (0);
return (1);
}
static int is_dr_dn(struct device_node *dn, int **indexes, int **names, int **types,
int **power_domains, int **my_drc_index)
{
if (!is_hotplug_capable(dn))
return (0);
*my_drc_index = (int *) get_property(dn, "ibm,my-drc-index", NULL);
if(!*my_drc_index)
return (0);
if (!dn->parent)
return (0);
return get_dn_properties(dn->parent, indexes, names, types, power_domains);
}
static inline int is_vdevice_root(struct device_node *dn)
......@@ -256,15 +265,48 @@ static inline int is_vdevice_root(struct device_node *dn)
return !strcmp(dn->name, "vdevice");
}
/**
* rpaphp_add_slot: Add Hot Plug slot(s) to sysfs
*
*/
char *rpaphp_get_drc_name(struct device_node *dn)
{
char *name, *ptr = NULL;
int *drc_names, *drc_indexes, i;
struct device_node *parent = dn->parent;
u32 *my_drc_index;
if (!parent)
return NULL;
my_drc_index = (u32 *) get_property(dn, "ibm,my-drc-index", NULL);
if (!my_drc_index)
return NULL;
drc_names = (int *) get_property(parent, "ibm,drc-names", NULL);
drc_indexes = (int *) get_property(parent, "ibm,drc-indexes", NULL);
if (!drc_names || !drc_indexes)
return NULL;
name = (char *) &drc_names[1];
for (i = 0; i < drc_indexes[0]; i++, name += (strlen(name) + 1)) {
if (drc_indexes[i + 1] == *my_drc_index) {
ptr = (char *) name;
break;
}
}
return ptr;
}
/****************************************************************
* rpaphp not only registers PCI hotplug slots(HOTPLUG),
* but also logical DR slots(EMBEDDED).
* HOTPLUG slot: An adapter can be physically added/removed.
* EMBEDDED slot: An adapter can be logically removed/added
* from/to a partition with the slot.
***************************************************************/
int rpaphp_add_slot(struct device_node *dn)
{
struct slot *slot;
int retval = 0;
int i;
int i, *my_drc_index, slot_type;
int *indexes, *names, *types, *power_domains;
char *name, *type;
......@@ -277,42 +319,65 @@ int rpaphp_add_slot(struct device_node *dn)
}
/* register PCI devices */
if (dn->name != 0 && strcmp(dn->name, "pci") == 0 &&
is_php_dn(dn, &indexes, &names, &types, &power_domains)) {
if (dn->name != 0 && strcmp(dn->name, "pci") == 0) {
if (is_php_dn(dn, &indexes, &names, &types, &power_domains))
slot_type = HOTPLUG;
else if (is_dr_dn(dn, &indexes, &names, &types, &power_domains, &my_drc_index))
slot_type = EMBEDDED;
else goto exit;
name = (char *) &names[1];
type = (char *) &types[1];
for (i = 0; i < indexes[0];
i++,
name += (strlen(name) + 1),
type += (strlen(type) + 1)) {
for (i = 0; i < indexes[0]; i++,
name += (strlen(name) + 1), type += (strlen(type) + 1)) {
if ( slot_type == HOTPLUG ||
(slot_type == EMBEDDED && indexes[i + 1] == my_drc_index[0])) {
if (!(slot = alloc_slot_struct(dn, indexes[i + 1], name,
power_domains[i + 1]))) {
retval = -ENOMEM;
goto exit;
}
if (slot_type == EMBEDDED)
slot->type = EMBEDDED;
else
slot->type = simple_strtoul(type, NULL, 10);
if (slot->type < 1 || slot->type > 16)
slot->type = 0;
retval = register_pci_slot(slot);
} /* for indexes */
} /* end of PCI device_node */
dbg(" Found drc-index:0x%x drc-name:%s drc-type:%s\n",
indexes[i + 1], name, type);
retval = register_pci_slot(slot);
if (slot_type == EMBEDDED)
goto exit;
}
}
}
exit:
dbg("%s - Exit: num_slots=%d rc[%d]\n",
__FUNCTION__, num_slots, retval);
return retval;
}
static int __init init_rpa(void)
/*
* init_slots - initialize 'struct slot' structures for each slot
*
*/
static void init_slots(void)
{
struct device_node *dn;
for (dn = find_all_nodes(); dn; dn = dn->next)
rpaphp_add_slot(dn);
}
static int __init init_rpa(void)
{
init_MUTEX(&rpaphp_sem);
/* initialize internal data structure etc. */
for (dn = find_all_nodes(); dn; dn = dn->next)
rpaphp_add_slot(dn);
init_slots();
if (!num_slots)
return -ENODEV;
......@@ -342,12 +407,18 @@ static int __init rpaphp_init(void)
{
info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
/* let EEH know they can use hotplug */
eeh_register_disable_func(&rpaphp_disable_slot);
/* read all the PRA info from the system */
return init_rpa();
}
static void __exit rpaphp_exit(void)
{
/* let EEH know we are going away */
eeh_register_disable_func(NULL);
cleanup_slots();
}
......@@ -374,11 +445,16 @@ static int enable_slot(struct hotplug_slot *hotplug_slot)
retval = -EINVAL;
}
up(&rpaphp_sem);
exit:
exit:
dbg("%s - Exit: rc[%d]\n", __FUNCTION__, retval);
return retval;
}
static int rpaphp_disable_slot(struct pci_dev *dev)
{
return disable_slot(rpaphp_find_hotplug_slot(dev));
}
static int disable_slot(struct hotplug_slot *hotplug_slot)
{
int retval;
......@@ -395,9 +471,7 @@ static int disable_slot(struct hotplug_slot *hotplug_slot)
down(&rpaphp_sem);
switch (slot->dev_type) {
case PCI_DEV:
rpaphp_set_attention_status(slot, LED_ID);
retval = rpaphp_unconfig_pci_adapter(slot);
rpaphp_set_attention_status(slot, LED_OFF);
break;
case VIO_DEV:
retval = rpaphp_unconfig_vio_adapter(slot);
......@@ -406,7 +480,7 @@ static int disable_slot(struct hotplug_slot *hotplug_slot)
retval = -ENODEV;
}
up(&rpaphp_sem);
exit:
exit:
dbg("%s - Exit: rc[%d]\n", __FUNCTION__, retval);
return retval;
}
......@@ -417,3 +491,4 @@ module_exit(rpaphp_exit);
EXPORT_SYMBOL_GPL(rpaphp_add_slot);
EXPORT_SYMBOL_GPL(rpaphp_remove_slot);
EXPORT_SYMBOL_GPL(rpaphp_slot_head);
EXPORT_SYMBOL_GPL(rpaphp_get_drc_name);
This diff is collapsed.
......@@ -29,6 +29,35 @@
#include <linux/pci.h>
#include "rpaphp.h"
static ssize_t removable_read_file (struct hotplug_slot *php_slot, char *buf)
{
u8 value;
int retval = -ENOENT;
struct slot *slot = (struct slot *)php_slot->private;
if (!slot)
return retval;
value = slot->removable;
retval = sprintf (buf, "%d\n", value);
return retval;
}
static struct hotplug_slot_attribute hotplug_slot_attr_removable = {
.attr = {.name = "phy_removable", .mode = S_IFREG | S_IRUGO},
.show = removable_read_file,
};
static void rpaphp_sysfs_add_attr_removable (struct hotplug_slot *slot)
{
sysfs_create_file(&slot->kobj, &hotplug_slot_attr_removable.attr);
}
static void rpaphp_sysfs_remove_attr_removable (struct hotplug_slot *slot)
{
sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_removable.attr);
}
static ssize_t location_read_file (struct hotplug_slot *php_slot, char *buf)
{
char *value;
......@@ -53,7 +82,7 @@ static void rpaphp_sysfs_add_attr_location (struct hotplug_slot *slot)
sysfs_create_file(&slot->kobj, &hotplug_slot_attr_location.attr);
}
void rpaphp_sysfs_remove_attr_location (struct hotplug_slot *slot)
static void rpaphp_sysfs_remove_attr_location (struct hotplug_slot *slot)
{
sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_location.attr);
}
......@@ -68,6 +97,17 @@ static void rpaphp_release_slot(struct hotplug_slot *hotplug_slot)
void dealloc_slot_struct(struct slot *slot)
{
struct list_head *ln, *n;
if (slot->dev_type == PCI_DEV) {
list_for_each_safe (ln, n, &slot->dev.pci_funcs) {
struct rpaphp_pci_func *func;
func = list_entry(ln, struct rpaphp_pci_func, sibling);
kfree(func);
}
}
kfree(slot->hotplug_slot->info);
kfree(slot->hotplug_slot->name);
kfree(slot->hotplug_slot);
......@@ -107,9 +147,8 @@ struct slot *alloc_slot_struct(struct device_node *dn, int drc_index, char *drc_
slot->hotplug_slot->private = slot;
slot->hotplug_slot->ops = &rpaphp_hotplug_slot_ops;
slot->hotplug_slot->release = &rpaphp_release_slot;
slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN;
return slot;
return (slot);
error_name:
kfree(slot->hotplug_slot->name);
......@@ -123,15 +162,56 @@ struct slot *alloc_slot_struct(struct device_node *dn, int drc_index, char *drc_
return NULL;
}
static int is_registered(struct slot *slot)
{
struct slot *tmp_slot;
list_for_each_entry(tmp_slot, &rpaphp_slot_head, rpaphp_slot_list) {
if (!strcmp(tmp_slot->name, slot->name))
return 1;
}
return 0;
}
int deregister_slot(struct slot *slot)
{
int retval = 0;
struct hotplug_slot *php_slot = slot->hotplug_slot;
dbg("%s - Entry: deregistering slot=%s\n",
__FUNCTION__, slot->name);
list_del(&slot->rpaphp_slot_list);
/* remove "phy_location" file */
rpaphp_sysfs_remove_attr_location(php_slot);
/* remove "phy_removable" file */
rpaphp_sysfs_remove_attr_removable(php_slot);
retval = pci_hp_deregister(php_slot);
if (retval)
err("Problem unregistering a slot %s\n", slot->name);
else
num_slots--;
dbg("%s - Exit: rc[%d]\n", __FUNCTION__, retval);
return retval;
}
int register_slot(struct slot *slot)
{
int retval;
char *vio_uni_addr = NULL;
dbg("%s registering slot:path[%s] index[%x], name[%s] pdomain[%x] type[%d]\n",
__FUNCTION__, slot->dn->full_name, slot->index, slot->name,
slot->power_domain, slot->type);
/* should not try to register the same slot twice */
if (is_registered(slot)) { /* should't be here */
err("register_slot: slot[%s] is already registered\n", slot->name);
rpaphp_release_slot(slot->hotplug_slot);
return 1;
}
retval = pci_hp_register(slot->hotplug_slot);
if (retval) {
err("pci_hp_register failed with error %d\n", retval);
......@@ -142,30 +222,40 @@ int register_slot(struct slot *slot)
/* create "phy_locatoin" file */
rpaphp_sysfs_add_attr_location(slot->hotplug_slot);
/* create "phy_removable" file */
rpaphp_sysfs_add_attr_removable(slot->hotplug_slot);
/* add slot to our internal list */
dbg("%s adding slot[%s] to rpaphp_slot_list\n",
__FUNCTION__, slot->name);
list_add(&slot->rpaphp_slot_list, &rpaphp_slot_head);
if (vio_uni_addr)
info("Slot [%s](vio_uni_addr=%s) registered\n",
slot->name, vio_uni_addr);
if (slot->dev_type == VIO_DEV)
info("Slot [%s](VIO location=%s) registered\n",
slot->name, slot->location);
else
info("Slot [%s](bus_id=%s) registered\n",
slot->name, pci_name(slot->bridge));
info("Slot [%s](PCI location=%s) registered\n",
slot->name, slot->location);
num_slots++;
return 0;
}
int rpaphp_get_power_status(struct slot *slot, u8 * value)
{
int rc;
int rc = 0;
if (slot->type == EMBEDDED) {
dbg("%s set to POWER_ON for EMBEDDED slot %s\n",
__FUNCTION__, slot->location);
*value = POWER_ON;
}
else {
rc = rtas_get_power_level(slot->power_domain, (int *) value);
if (rc)
err("failed to get power-level for slot(%s), rc=0x%x\n",
slot->name, rc);
slot->location, rc);
}
return rc;
}
......@@ -177,8 +267,8 @@ int rpaphp_set_attention_status(struct slot *slot, u8 status)
/* status: LED_OFF or LED_ON */
rc = rtas_set_indicator(DR_INDICATOR, slot->index, status);
if (rc)
err("slot(%s) set attention-status(%d) failed! rc=0x%x\n",
slot->name, status, rc);
err("slot(name=%s location=%s index=0x%x) set attention-status(%d) failed! rc=0x%x\n",
slot->name, slot->location, slot->index, status, rc);
return rc;
}
......@@ -74,12 +74,12 @@ int register_vio_slot(struct device_node *dn)
int rc = 1;
struct slot *slot = NULL;
name = rpaphp_get_drc_name(dn);
if (!name)
goto exit_rc;
index = (u32 *) get_property(dn, "ibm,my-drc-index", NULL);
if (!index)
goto exit_rc;
name = get_property(dn, "ibm,loc-code", NULL);
if (!name)
goto exit_rc;
if (!(slot = alloc_slot_struct(dn, *index, name, 0))) {
rc = -ENOMEM;
goto exit_rc;
......
......@@ -61,6 +61,7 @@ struct pci_func {
u8 configured;
u8 switch_save;
u8 presence_save;
u8 pwr_save;
u32 base_length[0x06];
u8 base_type[0x06];
u16 reserved2;
......
......@@ -137,6 +137,8 @@ u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id)
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
dbg("%s: Card present %x Power status %x\n", __FUNCTION__,
func->presence_save, func->pwr_save);
if (getstatus) {
/*
......@@ -145,6 +147,10 @@ u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id)
info("Latch open on Slot(%d)\n", ctrl->first_slot + hp_slot);
func->switch_save = 0;
taskInfo->event_type = INT_SWITCH_OPEN;
if (func->pwr_save && func->presence_save) {
taskInfo->event_type = INT_POWER_FAULT;
err("Surprise Removal of card\n");
}
} else {
/*
* Switch closed
......@@ -1427,6 +1433,7 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl)
rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, adapter_speed);
if (rc) {
err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__);
up(&ctrl->crit_sect);
return WRONG_BUS_FREQUENCY;
}
......@@ -1438,6 +1445,7 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl)
err("%s: Can't set bus speed/mode in the case of adapter & bus mismatch\n",
__FUNCTION__);
err("%s: Error code (%d)\n", __FUNCTION__, rc);
up(&ctrl->crit_sect);
return WRONG_BUS_FREQUENCY;
}
/* Done with exclusive hardware access */
......@@ -1589,8 +1597,9 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl)
func->status = 0;
func->switch_save = 0x10;
func->is_a_board = 0x01;
func->pwr_save = 1;
/* next, we will instantiate the linux pci_dev structures
/* Next, we will instantiate the linux pci_dev structures
* (with appropriate driver notification, if already present)
*/
index = 0;
......@@ -1781,6 +1790,7 @@ static u32 remove_board(struct pci_func *func, struct controller *ctrl)
func->function = 0;
func->configured = 0;
func->switch_save = 0x10;
func->pwr_save = 0;
func->is_a_board = 0;
}
......@@ -1807,7 +1817,6 @@ static void shpchp_pushbutton_thread (unsigned long slot)
{
struct slot *p_slot = (struct slot *) slot;
u8 getstatus;
int rc;
pushbutton_pending = 0;
......@@ -1821,23 +1830,7 @@ static void shpchp_pushbutton_thread (unsigned long slot)
p_slot->state = POWEROFF_STATE;
dbg("In power_down_board, b:d(%x:%x)\n", p_slot->bus, p_slot->device);
if (shpchp_disable_slot(p_slot)) {
/* Wait for exclusive access to hardware */
down(&p_slot->ctrl->crit_sect);
/* Turn on the Attention LED */
rc = p_slot->hpc_ops->set_attention_status(p_slot, 1);
if (rc) {
err("%s: Issue of Set Atten Indicator On command failed\n", __FUNCTION__);
return;
}
/* Wait for the command to complete */
wait_for_ctrl_irq (p_slot->ctrl);
/* Done with exclusive hardware access */
up(&p_slot->ctrl->crit_sect);
}
shpchp_disable_slot(p_slot);
p_slot->state = STATIC_STATE;
} else {
p_slot->state = POWERON_STATE;
......@@ -1847,15 +1840,6 @@ static void shpchp_pushbutton_thread (unsigned long slot)
/* Wait for exclusive access to hardware */
down(&p_slot->ctrl->crit_sect);
/* Turn off the green LED */
rc = p_slot->hpc_ops->set_attention_status(p_slot, 1);
if (rc) {
err("%s: Issue of Set Atten Indicator On command failed\n", __FUNCTION__);
return;
}
/* Wait for the command to complete */
wait_for_ctrl_irq (p_slot->ctrl);
p_slot->hpc_ops->green_led_off(p_slot);
/* Wait for the command to complete */
......@@ -2096,7 +2080,7 @@ int shpchp_enable_slot (struct slot *p_slot)
func = shpchp_slot_find(p_slot->bus, p_slot->device, 0);
if (!func) {
dbg("%s: Error! slot NULL\n", __FUNCTION__);
return (1);
return 1;
}
/* Check to see if (latch closed, card present, power off) */
......@@ -2105,19 +2089,19 @@ int shpchp_enable_slot (struct slot *p_slot)
if (rc || !getstatus) {
info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
return (0);
return 1;
}
rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (rc || getstatus) {
info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
return (0);
return 1;
}
rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (rc || getstatus) {
info("%s: already enabled on slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
return (0);
return 1;
}
up(&p_slot->ctrl->crit_sect);
......@@ -2125,7 +2109,7 @@ int shpchp_enable_slot (struct slot *p_slot)
func = shpchp_slot_create(p_slot->bus);
if (func == NULL)
return (1);
return 1;
func->bus = p_slot->bus;
func->device = p_slot->device;
......@@ -2135,6 +2119,8 @@ int shpchp_enable_slot (struct slot *p_slot)
/* We have to save the presence info for these slots */
p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
p_slot->hpc_ops->get_power_status(p_slot, &(func->pwr_save));
dbg("%s: func->pwr_save %x\n", __FUNCTION__, func->pwr_save);
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
func->switch_save = !getstatus? 0x10:0;
......@@ -2181,7 +2167,7 @@ int shpchp_disable_slot (struct slot *p_slot)
struct pci_func *func;
if (!p_slot->ctrl)
return (1);
return 1;
/* Check to see if (latch closed, card present, power on) */
down(&p_slot->ctrl->crit_sect);
......@@ -2190,19 +2176,19 @@ int shpchp_disable_slot (struct slot *p_slot)
if (ret || !getstatus) {
info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
return (0);
return 1;
}
ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (ret || getstatus) {
info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
return (0);
return 1;
}
ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (ret || !getstatus) {
info("%s: already disabled slot(%x)\n", __FUNCTION__, p_slot->number);
up(&p_slot->ctrl->crit_sect);
return (0);
return 1;
}
up(&p_slot->ctrl->crit_sect);
......
......@@ -263,6 +263,7 @@ int shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slot
new_slot->function = (u8) function;
new_slot->is_a_board = 1;
new_slot->switch_save = 0x10;
new_slot->pwr_save = 1;
/* In case of unsupported board */
new_slot->status = DevError;
new_slot->pci_dev = pci_find_slot(new_slot->bus,
......
......@@ -218,6 +218,10 @@ static void acpi_get__hpp ( struct acpi_bridge *ab)
}
ab->_hpp = kmalloc (sizeof (struct acpi__hpp), GFP_KERNEL);
if (!ab->_hpp) {
err ("acpi_shpchprm:%s alloc for _HPP failed\n", path_name);
goto free_and_return;
}
memset(ab->_hpp, 0, sizeof(struct acpi__hpp));
ab->_hpp->cache_line_size = nui[0];
......@@ -1391,7 +1395,7 @@ static int configure_existing_function(
static int bind_pci_resources_to_slots ( struct controller *ctrl)
{
struct pci_func *func;
struct pci_func *func, new_func;
int busn = ctrl->bus;
int devn, funn;
u32 vid;
......@@ -1406,12 +1410,20 @@ static int bind_pci_resources_to_slots ( struct controller *ctrl)
if (vid != 0xFFFFFFFF) {
func = shpchp_slot_find(busn, devn, funn);
if (!func)
continue;
if (!func) {
memset(&new_func, 0, sizeof(struct pci_func));
new_func.bus = busn;
new_func.device = devn;
new_func.function = funn;
new_func.is_a_board = 1;
configure_existing_function(ctrl, &new_func);
shpchprm_dump_func_res(&new_func);
} else {
configure_existing_function(ctrl, func);
dbg("aCCF:existing PCI 0x%x Func ResourceDump\n", ctrl->bus);
shpchprm_dump_func_res(func);
}
dbg("aCCF:existing PCI 0x%x Func ResourceDump\n", ctrl->bus);
}
}
}
......
......@@ -208,7 +208,7 @@ static int configure_existing_function(
static int bind_pci_resources_to_slots ( struct controller *ctrl)
{
struct pci_func *func;
struct pci_func *func, new_func;
int busn = ctrl->slot_bus;
int devn, funn;
u32 vid;
......@@ -226,12 +226,20 @@ static int bind_pci_resources_to_slots ( struct controller *ctrl)
if (vid != 0xFFFFFFFF) {
func = shpchp_slot_find(busn, devn, funn);
if (!func)
continue;
if (!func) {
memset(&new_func, 0, sizeof(struct pci_func));
new_func.bus = busn;
new_func.device = devn;
new_func.function = funn;
new_func.is_a_board = 1;
configure_existing_function(ctrl, &new_func);
phprm_dump_func_res(&new_func);
} else {
configure_existing_function(ctrl, func);
dbg("aCCF:existing PCI 0x%x Func ResourceDump\n", ctrl->bus);
phprm_dump_func_res(func);
}
dbg("aCCF:existing PCI 0x%x Func ResourceDump\n", ctrl->bus);
}
}
}
......
......@@ -569,7 +569,7 @@ static int msix_capability_init(struct pci_dev *dev)
struct msi_desc *entry;
struct msg_address address;
struct msg_data data;
int vector = 0, pos, dev_msi_cap;
int vector = 0, pos, dev_msi_cap, i;
u32 phys_addr, table_offset;
u32 control;
u8 bir;
......@@ -629,12 +629,12 @@ static int msix_capability_init(struct pci_dev *dev)
writel(address.hi_address, base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET);
writel(*(u32*)&data, base + PCI_MSIX_ENTRY_DATA_OFFSET);
/* Initialize all entries from 1 up to 0 */
for (pos = 1; pos < dev_msi_cap; pos++) {
writel(0, base + pos * PCI_MSIX_ENTRY_SIZE +
for (i = 1; i < dev_msi_cap; i++) {
writel(0, base + i * PCI_MSIX_ENTRY_SIZE +
PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET);
writel(0, base + pos * PCI_MSIX_ENTRY_SIZE +
writel(0, base + i * PCI_MSIX_ENTRY_SIZE +
PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET);
writel(0, base + pos * PCI_MSIX_ENTRY_SIZE +
writel(0, base + i * PCI_MSIX_ENTRY_SIZE +
PCI_MSIX_ENTRY_DATA_OFFSET);
}
attach_msi_entry(entry, vector);
......
......@@ -442,7 +442,7 @@ int pci_enable_wake(struct pci_dev *dev, u32 state, int enable)
pci_read_config_word(dev,pm+PCI_PM_PMC,&value);
value &= PCI_PM_CAP_PME_MASK;
value >>= ffs(value); /* First bit of mask */
value >>= ffs(PCI_PM_CAP_PME_MASK) - 1; /* First bit of mask */
/* Check if it can generate PME# from requested state. */
if (!value || !(value & (1 << state)))
......
......@@ -705,6 +705,7 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
}
if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB)
switch(dev->subsystem_device) {
case 0x80b1: /* P4GE-V */
case 0x80b2: /* P4PE */
case 0x8093: /* P4B533-V */
asus_hides_smbus = 1;
......
......@@ -1246,6 +1246,8 @@ acornfb_detect_monitortype(void)
/*
* This enables the unused memory to be freed on older Acorn machines.
* We are freeing memory on behalf of the architecture initialisation
* code here.
*/
static inline void
free_unused_pages(unsigned int virtual_start, unsigned int virtual_end)
......@@ -1268,7 +1270,7 @@ free_unused_pages(unsigned int virtual_start, unsigned int virtual_end)
*/
page = virt_to_page(virtual_start);
ClearPageReserved(page);
atomic_set(&page->count, 1);
set_page_count(page, 1);
free_page(virtual_start);
virtual_start += PAGE_SIZE;
......
......@@ -2197,7 +2197,9 @@ int vfs_readlink(struct dentry *dentry, char __user *buffer, int buflen, const c
int generic_readlink(struct dentry *dentry, char __user *buffer, int buflen)
{
struct nameidata nd;
int res = dentry->d_inode->i_op->follow_link(dentry, &nd);
int res;
nd.depth = 0;
res = dentry->d_inode->i_op->follow_link(dentry, &nd);
if (!res) {
res = vfs_readlink(dentry, buffer, buflen, nd_get_link(&nd));
if (dentry->d_inode->i_op->put_link)
......
......@@ -288,15 +288,15 @@ static __inline__ int ffs(int x)
#define hweight16(x) generic_hweight16(x)
#define hweight8(x) generic_hweight8(x)
extern unsigned long find_next_zero_bit(unsigned long *addr, unsigned long size, unsigned long offset);
extern unsigned long find_next_zero_bit(const unsigned long *addr, unsigned long size, unsigned long offset);
#define find_first_zero_bit(addr, size) \
find_next_zero_bit((addr), (size), 0)
extern unsigned long find_next_bit(unsigned long *addr, unsigned long size, unsigned long offset);
extern unsigned long find_next_bit(const unsigned long *addr, unsigned long size, unsigned long offset);
#define find_first_bit(addr, size) \
find_next_bit((addr), (size), 0)
extern unsigned long find_next_zero_le_bit(unsigned long *addr, unsigned long size, unsigned long offset);
extern unsigned long find_next_zero_le_bit(const unsigned long *addr, unsigned long size, unsigned long offset);
#define find_first_zero_le_bit(addr, size) \
find_next_zero_le_bit((addr), (size), 0)
......
......@@ -14,7 +14,7 @@
#ifdef __GNUC__
#ifdef __s390x__
static __inline__ __u64 ___arch__swab64p(__u64 *x)
static __inline__ __u64 ___arch__swab64p(const __u64 *x)
{
__u64 result;
......@@ -40,7 +40,7 @@ static __inline__ void ___arch__swab64s(__u64 *x)
}
#endif /* __s390x__ */
static __inline__ __u32 ___arch__swab32p(__u32 *x)
static __inline__ __u32 ___arch__swab32p(const __u32 *x)
{
__u32 result;
......@@ -77,7 +77,7 @@ static __inline__ void ___arch__swab32s(__u32 *x)
*x = ___arch__swab32p(x);
}
static __inline__ __u16 ___arch__swab16p(__u16 *x)
static __inline__ __u16 ___arch__swab16p(const __u16 *x)
{
__u16 result;
......
......@@ -134,7 +134,7 @@ static __inline__ __attribute_const__ __u16 __fswab16(__u16 x)
{
return __arch__swab16(x);
}
static __inline__ __u16 __swab16p(__u16 *x)
static __inline__ __u16 __swab16p(const __u16 *x)
{
return __arch__swab16p(x);
}
......@@ -147,7 +147,7 @@ static __inline__ __attribute_const__ __u32 __fswab32(__u32 x)
{
return __arch__swab32(x);
}
static __inline__ __u32 __swab32p(__u32 *x)
static __inline__ __u32 __swab32p(const __u32 *x)
{
return __arch__swab32p(x);
}
......@@ -167,7 +167,7 @@ static __inline__ __attribute_const__ __u64 __fswab64(__u64 x)
return __arch__swab64(x);
# endif
}
static __inline__ __u64 __swab64p(__u64 *x)
static __inline__ __u64 __swab64p(const __u64 *x)
{
return __arch__swab64p(x);
}
......
......@@ -171,19 +171,19 @@ static inline int __cpus_subset(cpumask_t *src1p,
}
#define cpus_empty(src) __cpus_empty(&(src), NR_CPUS)
static inline int __cpus_empty(cpumask_t *srcp, int nbits)
static inline int __cpus_empty(const cpumask_t *srcp, int nbits)
{
return bitmap_empty(srcp->bits, nbits);
}
#define cpus_full(cpumask) __cpus_full(&(cpumask), NR_CPUS)
static inline int __cpus_full(cpumask_t *srcp, int nbits)
static inline int __cpus_full(const cpumask_t *srcp, int nbits)
{
return bitmap_full(srcp->bits, nbits);
}
#define cpus_weight(cpumask) __cpus_weight(&(cpumask), NR_CPUS)
static inline int __cpus_weight(cpumask_t *srcp, int nbits)
static inline int __cpus_weight(const cpumask_t *srcp, int nbits)
{
return bitmap_weight(srcp->bits, nbits);
}
......@@ -191,7 +191,7 @@ static inline int __cpus_weight(cpumask_t *srcp, int nbits)
#define cpus_shift_right(dst, src, n) \
__cpus_shift_right(&(dst), &(src), (n), NR_CPUS)
static inline void __cpus_shift_right(cpumask_t *dstp,
cpumask_t *srcp, int n, int nbits)
const cpumask_t *srcp, int n, int nbits)
{
bitmap_shift_right(dstp->bits, srcp->bits, n, nbits);
}
......@@ -199,19 +199,19 @@ static inline void __cpus_shift_right(cpumask_t *dstp,
#define cpus_shift_left(dst, src, n) \
__cpus_shift_left(&(dst), &(src), (n), NR_CPUS)
static inline void __cpus_shift_left(cpumask_t *dstp,
cpumask_t *srcp, int n, int nbits)
const cpumask_t *srcp, int n, int nbits)
{
bitmap_shift_left(dstp->bits, srcp->bits, n, nbits);
}
#define first_cpu(src) __first_cpu(&(src), NR_CPUS)
static inline int __first_cpu(cpumask_t *srcp, int nbits)
static inline int __first_cpu(const cpumask_t *srcp, int nbits)
{
return find_first_bit(srcp->bits, nbits);
}
#define next_cpu(n, src) __next_cpu((n), &(src), NR_CPUS)
static inline int __next_cpu(int n, cpumask_t *srcp, int nbits)
static inline int __next_cpu(int n, const cpumask_t *srcp, int nbits)
{
return find_next_bit(srcp->bits, nbits, n+1);
}
......
......@@ -967,12 +967,14 @@
#define PCI_VENDOR_ID_3COM 0x10b7
#define PCI_DEVICE_ID_3COM_3C985 0x0001
#define PCI_DEVICE_ID_3COM_3C940 0x1700
#define PCI_DEVICE_ID_3COM_3C339 0x3390
#define PCI_DEVICE_ID_3COM_3C359 0x3590
#define PCI_DEVICE_ID_3COM_3C590 0x5900
#define PCI_DEVICE_ID_3COM_3C595TX 0x5950
#define PCI_DEVICE_ID_3COM_3C595T4 0x5951
#define PCI_DEVICE_ID_3COM_3C595MII 0x5952
#define PCI_DEVICE_ID_3COM_3C940B 0x80eb
#define PCI_DEVICE_ID_3COM_3C900TPO 0x9000
#define PCI_DEVICE_ID_3COM_3C900COMBO 0x9001
#define PCI_DEVICE_ID_3COM_3C905TX 0x9050
......@@ -1420,6 +1422,9 @@
#define PCI_DEVICE_ID_RICOH_RL5C476 0x0476
#define PCI_DEVICE_ID_RICOH_RL5C478 0x0478
#define PCI_VENDOR_ID_DLINK 0x1186
#define PCI_DEVICE_ID_DLINK_DGE510T 0x4c00
#define PCI_VENDOR_ID_ARTOP 0x1191
#define PCI_DEVICE_ID_ARTOP_ATP8400 0x0004
#define PCI_DEVICE_ID_ARTOP_ATP850UF 0x0005
......@@ -1735,6 +1740,9 @@
#define PCI_VENDOR_ID_KAWASAKI 0x136b
#define PCI_DEVICE_ID_MCHIP_KL5A72002 0xff01
#define PCI_VENDOR_ID_CNET 0x1371
#define PCI_DEVICE_ID_CNET_GIGACARD 0x434e
#define PCI_VENDOR_ID_LMC 0x1376
#define PCI_DEVICE_ID_LMC_HSSI 0x0003
#define PCI_DEVICE_ID_LMC_DS3 0x0004
......@@ -1769,6 +1777,12 @@
#define PCI_DEVICE_ID_CCD_B00C 0xb00c
#define PCI_DEVICE_ID_CCD_B100 0xb100
#define PCI_VENDOR_ID_MICROGATE 0x13c0
#define PCI_DEVICE_ID_MICROGATE_USC 0x0010
#define PCI_DEVICE_ID_MICROGATE_SCC 0x0020
#define PCI_DEVICE_ID_MICROGATE_SCA 0x0030
#define PCI_DEVICE_ID_MICROGATE_USC2 0x0210
#define PCI_VENDOR_ID_3WARE 0x13C1
#define PCI_DEVICE_ID_3WARE_1000 0x1000
#define PCI_DEVICE_ID_3WARE_7000 0x1001
......@@ -1913,6 +1927,10 @@
#define PCI_DEVICE_ID_FARSITE_TE1 0x1610
#define PCI_DEVICE_ID_FARSITE_TE1C 0x1612
#define PCI_VENDOR_ID_LINKSYS 0x1737
#define PCI_DEVICE_ID_LINKSYS_EG1032 0x1032
#define PCI_DEVICE_ID_LINKSYS_EG1064 0x1064
#define PCI_VENDOR_ID_ALTIMA 0x173b
#define PCI_DEVICE_ID_ALTIMA_AC1000 0x03e8
#define PCI_DEVICE_ID_ALTIMA_AC1001 0x03e9
......@@ -2270,12 +2288,3 @@
#define PCI_DEVICE_ID_ARK_STING 0xa091
#define PCI_DEVICE_ID_ARK_STINGARK 0xa099
#define PCI_DEVICE_ID_ARK_2000MT 0xa0a1
#define PCI_VENDOR_ID_MICROGATE 0x13c0
#define PCI_DEVICE_ID_MICROGATE_USC 0x0010
#define PCI_DEVICE_ID_MICROGATE_SCC 0x0020
#define PCI_DEVICE_ID_MICROGATE_SCA 0x0030
#define PCI_DEVICE_ID_MICROGATE_USC2 0x0210
#define PCI_VENDOR_ID_HINT 0x3388
#define PCI_DEVICE_ID_HINT_VXPROII_IDE 0x8013
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment