Commit 2cc7138f authored by Linus Torvalds's avatar Linus Torvalds

Merge bk://bart.bkbits.net/ide-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux
parents 2b273dd6 10ffb49a
...@@ -18,52 +18,7 @@ ...@@ -18,52 +18,7 @@
#include "aec62xx.h" #include "aec62xx.h"
#if defined(DISPLAY_AEC62XX_TIMINGS) && defined(CONFIG_PROC_FS) #if 0
#include <linux/stat.h>
#include <linux/proc_fs.h>
static u8 aec62xx_proc = 0;
#define AEC_MAX_DEVS 5
static struct pci_dev *aec_devs[AEC_MAX_DEVS];
static int n_aec_devs;
static int aec62xx_get_info (char *buffer, char **addr, off_t offset, int count)
{
char *p = buffer;
char *chipset_nums[] = {"error", "error", "error", "error",
"error", "error", "850UF", "860",
"860R", "865", "865R", "error" };
int len;
int i;
for (i = 0; i < n_aec_devs; i++) {
struct pci_dev *dev = aec_devs[i];
unsigned long iobase = pci_resource_start(dev, 4);
u8 c0 = 0, c1 = 0, art = 0;
c0 = inb(iobase + 0x02);
c1 = inb(iobase + 0x0a);
p += sprintf(p, "\nController: %d\n", i);
p += sprintf(p, "Chipset: AEC%s\n", chipset_nums[dev->device]);
p += sprintf(p, "--------------- Primary Channel "
"---------------- Secondary Channel "
"-------------\n");
(void) pci_read_config_byte(dev, 0x4a, &art);
p += sprintf(p, " %sabled ",
(art&0x02)?" en":"dis");
p += sprintf(p, " %sabled\n",
(art&0x04)?" en":"dis");
p += sprintf(p, "--------------- drive0 --------- drive1 "
"-------- drive0 ---------- drive1 ------\n");
p += sprintf(p, "DMA enabled: %s %s ",
(c0&0x20)?"yes":"no ",(c0&0x40)?"yes":"no ");
p += sprintf(p, " %s %s\n",
(c1&0x20)?"yes":"no ",(c1&0x40)?"yes":"no ");
if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) { if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
(void) pci_read_config_byte(dev, 0x54, &art); (void) pci_read_config_byte(dev, 0x54, &art);
p += sprintf(p, "DMA Mode: %s(%s)", p += sprintf(p, "DMA Mode: %s(%s)",
...@@ -79,59 +34,7 @@ static int aec62xx_get_info (char *buffer, char **addr, off_t offset, int count) ...@@ -79,59 +34,7 @@ static int aec62xx_get_info (char *buffer, char **addr, off_t offset, int count)
(c1&0x40)?((art&0xc0)?"UDMA":" DMA"):" PIO", (c1&0x40)?((art&0xc0)?"UDMA":" DMA"):" PIO",
(art&0x80)?"2":(art&0x40)?"1":"0"); (art&0x80)?"2":(art&0x40)?"1":"0");
} else { } else {
/* #endif
* case PCI_DEVICE_ID_ARTOP_ATP860:
* case PCI_DEVICE_ID_ARTOP_ATP860R:
* case PCI_DEVICE_ID_ARTOP_ATP865:
* case PCI_DEVICE_ID_ARTOP_ATP865R:
*/
(void) pci_read_config_byte(dev, 0x44, &art);
p += sprintf(p, "DMA Mode: %s(%s)",
(c0&0x20)?((art&0x07)?"UDMA":" DMA"):" PIO",
((art&0x07)==0x07)?"6":
((art&0x06)==0x06)?"5":
((art&0x05)==0x05)?"4":
((art&0x04)==0x04)?"3":
((art&0x03)==0x03)?"2":
((art&0x02)==0x02)?"1":
((art&0x01)==0x01)?"0":"?");
p += sprintf(p, " %s(%s)",
(c0&0x40)?((art&0x70)?"UDMA":" DMA"):" PIO",
((art&0x70)==0x70)?"6":
((art&0x60)==0x60)?"5":
((art&0x50)==0x50)?"4":
((art&0x40)==0x40)?"3":
((art&0x30)==0x30)?"2":
((art&0x20)==0x20)?"1":
((art&0x10)==0x10)?"0":"?");
(void) pci_read_config_byte(dev, 0x45, &art);
p += sprintf(p, " %s(%s)",
(c1&0x20)?((art&0x07)?"UDMA":" DMA"):" PIO",
((art&0x07)==0x07)?"6":
((art&0x06)==0x06)?"5":
((art&0x05)==0x05)?"4":
((art&0x04)==0x04)?"3":
((art&0x03)==0x03)?"2":
((art&0x02)==0x02)?"1":
((art&0x01)==0x01)?"0":"?");
p += sprintf(p, " %s(%s)\n",
(c1&0x40)?((art&0x70)?"UDMA":" DMA"):" PIO",
((art&0x70)==0x70)?"6":
((art&0x60)==0x60)?"5":
((art&0x50)==0x50)?"4":
((art&0x40)==0x40)?"3":
((art&0x30)==0x30)?"2":
((art&0x20)==0x20)?"1":
((art&0x10)==0x10)?"0":"?");
}
}
/* p - buffer must be less than 4k! */
len = (p - buffer) - offset;
*addr = buffer + offset;
return len > count ? count : len;
}
#endif /* defined(DISPLAY_AEC62xx_TIMINGS) && defined(CONFIG_PROC_FS) */
/* /*
* TO DO: active tuning and correction of cards without a bios. * TO DO: active tuning and correction of cards without a bios.
...@@ -375,15 +278,6 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch ...@@ -375,15 +278,6 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch
printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start); printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start);
} }
#if defined(DISPLAY_AEC62XX_TIMINGS) && defined(CONFIG_PROC_FS)
aec_devs[n_aec_devs++] = dev;
if (!aec62xx_proc) {
aec62xx_proc = 1;
ide_pci_create_host_proc("aec62xx", aec62xx_get_info);
}
#endif /* DISPLAY_AEC62XX_TIMINGS && CONFIG_PROC_FS */
if (bus_speed <= 33) if (bus_speed <= 33)
pci_set_drvdata(dev, (void *) aec6xxx_33_base); pci_set_drvdata(dev, (void *) aec6xxx_33_base);
else else
......
...@@ -5,8 +5,6 @@ ...@@ -5,8 +5,6 @@
#include <linux/pci.h> #include <linux/pci.h>
#include <linux/ide.h> #include <linux/ide.h>
#define DISPLAY_AEC62XX_TIMINGS
struct chipset_bus_clock_list_entry { struct chipset_bus_clock_list_entry {
byte xfer_speed; byte xfer_speed;
byte chipset_settings; byte chipset_settings;
......
...@@ -47,102 +47,6 @@ static atiixp_ide_timing mdma_timing[] = { ...@@ -47,102 +47,6 @@ static atiixp_ide_timing mdma_timing[] = {
static int save_mdma_mode[4]; static int save_mdma_mode[4];
#define DISPLAY_ATIIXP_TIMINGS
#if defined(DISPLAY_ATIIXP_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
#include <linux/proc_fs.h>
static u8 atiixp_proc;
static struct pci_dev *bmide_dev;
/**
* atiixp_get_info - fill in /proc for ATIIXP IDE
* @buffer: buffer to fill
* @addr: address of user start in buffer
* @offset: offset into 'file'
* @count: buffer count
*
* Output summary data on the tuning.
*/
static int atiixp_get_info(char *buffer, char **addr, off_t offset, int count)
{
char *p = buffer;
struct pci_dev *dev = bmide_dev;
unsigned long bibma = pci_resource_start(dev, 4);
u32 mdma_timing = 0;
u16 udma_mode = 0, pio_mode = 0;
u8 c0, c1, udma_control = 0;
p += sprintf(p, "\n ATI ");
p += sprintf(p, "ATIIXP Ultra100 IDE Chipset.\n");
pci_read_config_byte(dev, ATIIXP_IDE_UDMA_CONTROL, &udma_control);
pci_read_config_word(dev, ATIIXP_IDE_UDMA_MODE, &udma_mode);
pci_read_config_word(dev, ATIIXP_IDE_PIO_MODE, &pio_mode);
pci_read_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, &mdma_timing);
/*
* at that point bibma+0x2 et bibma+0xa are byte registers
* to investigate:
*/
c0 = inb(bibma + 0x02);
c1 = inb(bibma + 0x0a);
p += sprintf(p, "--------------- Primary Channel "
"---------------- Secondary Channel "
"-------------\n");
p += sprintf(p, " %sabled "
" %sabled\n",
(c0 & 0x80) ? "dis" : " en",
(c1 & 0x80) ? "dis" : " en");
p += sprintf(p, "--------------- drive0 --------- drive1 "
"-------- drive0 ---------- drive1 ------\n");
p += sprintf(p, "DMA enabled: %s %s "
" %s %s\n",
(c0 & 0x20) ? "yes" : "no ",
(c0 & 0x40) ? "yes" : "no ",
(c1 & 0x20) ? "yes" : "no ",
(c1 & 0x40) ? "yes" : "no " );
p += sprintf(p, "UDMA enabled: %s %s "
" %s %s\n",
(udma_control & 0x01) ? "yes" : "no ",
(udma_control & 0x02) ? "yes" : "no ",
(udma_control & 0x04) ? "yes" : "no ",
(udma_control & 0x08) ? "yes" : "no " );
p += sprintf(p, "UDMA mode: %c %c "
" %c %c\n",
(udma_control & 0x01) ?
((udma_mode & 0x07) + 48) : 'X',
(udma_control & 0x02) ?
(((udma_mode >> 4) & 0x07) + 48) : 'X',
(udma_control & 0x04) ?
(((udma_mode >> 8) & 0x07) + 48) : 'X',
(udma_control & 0x08) ?
(((udma_mode >> 12) & 0x07) + 48) : 'X');
p += sprintf(p, "MDMA mode: %c %c "
" %c %c\n",
(save_mdma_mode[0] && (c0 & 0x20)) ?
((save_mdma_mode[0] & 0xf) + 48) : 'X',
(save_mdma_mode[1] && (c0 & 0x40)) ?
((save_mdma_mode[1] & 0xf) + 48) : 'X',
(save_mdma_mode[2] && (c1 & 0x20)) ?
((save_mdma_mode[2] & 0xf) + 48) : 'X',
(save_mdma_mode[3] && (c1 & 0x40)) ?
((save_mdma_mode[3] & 0xf) + 48) : 'X');
p += sprintf(p, "PIO mode: %c %c "
" %c %c\n",
(c0 & 0x20) ? 'X' : ((pio_mode & 0x07) + 48),
(c0 & 0x40) ? 'X' : (((pio_mode >> 4) & 0x07) + 48),
(c1 & 0x20) ? 'X' : (((pio_mode >> 8) & 0x07) + 48),
(c1 & 0x40) ? 'X' : (((pio_mode >> 12) & 0x07) + 48));
return p - buffer; /* => must be less than 4k! */
}
#endif /* defined(DISPLAY_ATIIXP_TIMINGS) && defined(CONFIG_PROC_FS) */
/** /**
* atiixp_ratemask - compute rate mask for ATIIXP IDE * atiixp_ratemask - compute rate mask for ATIIXP IDE
* @drive: IDE drive to compute for * @drive: IDE drive to compute for
...@@ -396,27 +300,6 @@ static int atiixp_dma_check(ide_drive_t *drive) ...@@ -396,27 +300,6 @@ static int atiixp_dma_check(ide_drive_t *drive)
return 0; return 0;
} }
/**
* init_chipset_atiixp - set up the ATIIXP chipset
* @dev: PCI device to set up
* @name: Name of the device
*
* Initialize the PCI device as required. For the ATIIXP this turns
* out to be nice and simple
*/
static unsigned int __devinit init_chipset_atiixp(struct pci_dev *dev, const char *name)
{
#if defined(DISPLAY_ATIIXP_TIMINGS) && defined(CONFIG_PROC_FS)
if (!atiixp_proc) {
atiixp_proc = 1;
bmide_dev = dev;
ide_pci_create_host_proc("atiixp", atiixp_get_info);
}
#endif /* DISPLAY_ATIIXP_TIMINGS && CONFIG_PROC_FS */
return 0;
}
/** /**
* init_hwif_atiixp - fill in the hwif for the ATIIXP * init_hwif_atiixp - fill in the hwif for the ATIIXP
* @hwif: IDE interface * @hwif: IDE interface
...@@ -459,7 +342,6 @@ static void __devinit init_hwif_atiixp(ide_hwif_t *hwif) ...@@ -459,7 +342,6 @@ static void __devinit init_hwif_atiixp(ide_hwif_t *hwif)
static ide_pci_device_t atiixp_pci_info[] __devinitdata = { static ide_pci_device_t atiixp_pci_info[] __devinitdata = {
{ /* 0 */ { /* 0 */
.name = "ATIIXP", .name = "ATIIXP",
.init_chipset = init_chipset_atiixp,
.init_hwif = init_hwif_atiixp, .init_hwif = init_hwif_atiixp,
.channels = 2, .channels = 2,
.autodma = AUTODMA, .autodma = AUTODMA,
......
...@@ -51,57 +51,6 @@ ...@@ -51,57 +51,6 @@
#include <asm/io.h> #include <asm/io.h>
#include <asm/irq.h> #include <asm/irq.h>
#define DISPLAY_CS5520_TIMINGS
#if defined(DISPLAY_CS5520_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
#include <linux/proc_fs.h>
static u8 cs5520_proc = 0;
static struct pci_dev *bmide_dev;
static int cs5520_get_info(char *buffer, char **addr, off_t offset, int count)
{
char *p = buffer;
unsigned long bmiba = pci_resource_start(bmide_dev, 2);
int len;
u8 c0 = 0, c1 = 0;
u16 reg16;
u32 reg32;
/*
* at that point bibma+0x2 et bibma+0xa are byte registers
* to investigate:
*/
c0 = inb(bmiba + 0x02);
c1 = inb(bmiba + 0x0a);
p += sprintf(p, "\nCyrix CS55x0 IDE\n");
p += sprintf(p, "--------------- Primary Channel "
"---------------- Secondary Channel "
"-------------\n");
p += sprintf(p, " %sabled "
" %sabled\n",
(c0&0x80) ? "dis" : " en",
(c1&0x80) ? "dis" : " en");
p += sprintf(p, "\n\nTimings: \n");
pci_read_config_word(bmide_dev, 0x62, &reg16);
p += sprintf(p, "8bit CAT/CRT : %04x\n", reg16);
pci_read_config_dword(bmide_dev, 0x64, &reg32);
p += sprintf(p, "16bit Primary : %08x\n", reg32);
pci_read_config_dword(bmide_dev, 0x68, &reg32);
p += sprintf(p, "16bit Secondary: %08x\n", reg32);
len = (p - buffer) - offset;
*addr = buffer + offset;
return len > count ? count : len;
}
#endif
struct pio_clocks struct pio_clocks
{ {
int address; int address;
...@@ -145,11 +94,13 @@ static int cs5520_tune_chipset(ide_drive_t *drive, u8 xferspeed) ...@@ -145,11 +94,13 @@ static int cs5520_tune_chipset(ide_drive_t *drive, u8 xferspeed)
/* FIXME: if DMA = 1 do we need to set the DMA bit here ? */ /* FIXME: if DMA = 1 do we need to set the DMA bit here ? */
/* 8bit command timing for channel */ /* 8bit CAT/CRT - 8bit command timing for channel */
pci_write_config_byte(pdev, 0x62 + controller, pci_write_config_byte(pdev, 0x62 + controller,
(cs5520_pio_clocks[pio].recovery << 4) | (cs5520_pio_clocks[pio].recovery << 4) |
(cs5520_pio_clocks[pio].assert)); (cs5520_pio_clocks[pio].assert));
/* 0x64 - 16bit Primary, 0x68 - 16bit Secondary */
/* FIXME: should these use address ? */ /* FIXME: should these use address ? */
/* Data read timing */ /* Data read timing */
pci_write_config_byte(pdev, 0x64 + 4*controller + (drive->dn&1), pci_write_config_byte(pdev, 0x64 + 4*controller + (drive->dn&1),
...@@ -189,19 +140,6 @@ static int cs5520_config_drive_xfer_rate(ide_drive_t *drive) ...@@ -189,19 +140,6 @@ static int cs5520_config_drive_xfer_rate(ide_drive_t *drive)
return hwif->ide_dma_on(drive); return hwif->ide_dma_on(drive);
} }
static unsigned int __devinit init_chipset_cs5520(struct pci_dev *dev, const char *name)
{
#if defined(DISPLAY_CS5520_TIMINGS) && defined(CONFIG_PROC_FS)
if (!cs5520_proc) {
cs5520_proc = 1;
bmide_dev = dev;
ide_pci_create_host_proc("cs5520", cs5520_get_info);
}
#endif /* DISPLAY_CS5520_TIMINGS && CONFIG_PROC_FS */
return 0;
}
/* /*
* We provide a callback for our nonstandard DMA location * We provide a callback for our nonstandard DMA location
*/ */
...@@ -255,7 +193,6 @@ static void __devinit init_hwif_cs5520(ide_hwif_t *hwif) ...@@ -255,7 +193,6 @@ static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
#define DECLARE_CS_DEV(name_str) \ #define DECLARE_CS_DEV(name_str) \
{ \ { \
.name = name_str, \ .name = name_str, \
.init_chipset = init_chipset_cs5520, \
.init_setup_dma = cs5520_init_setup_dma, \ .init_setup_dma = cs5520_init_setup_dma, \
.init_hwif = init_hwif_cs5520, \ .init_hwif = init_hwif_cs5520, \
.channels = 2, \ .channels = 2, \
...@@ -294,7 +231,6 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic ...@@ -294,7 +231,6 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic
printk(KERN_WARNING "cs5520: No suitable DMA available.\n"); printk(KERN_WARNING "cs5520: No suitable DMA available.\n");
return -ENODEV; return -ENODEV;
} }
init_chipset_cs5520(dev, d->name);
index.all = 0xf0f0; index.all = 0xf0f0;
......
...@@ -31,56 +31,6 @@ ...@@ -31,56 +31,6 @@
#include <asm/io.h> #include <asm/io.h>
#include <asm/irq.h> #include <asm/irq.h>
#define DISPLAY_CS5530_TIMINGS
#if defined(DISPLAY_CS5530_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
#include <linux/proc_fs.h>
static u8 cs5530_proc = 0;
static struct pci_dev *bmide_dev;
static int cs5530_get_info (char *buffer, char **addr, off_t offset, int count)
{
char *p = buffer;
unsigned long bibma = pci_resource_start(bmide_dev, 4);
u8 c0 = 0, c1 = 0;
/*
* at that point bibma+0x2 et bibma+0xa are byte registers
* to investigate:
*/
c0 = inb_p((u16)bibma + 0x02);
c1 = inb_p((u16)bibma + 0x0a);
p += sprintf(p, "\n "
"Cyrix 5530 Chipset.\n");
p += sprintf(p, "--------------- Primary Channel "
"---------------- Secondary Channel "
"-------------\n");
p += sprintf(p, " %sabled "
" %sabled\n",
(c0&0x80) ? "dis" : " en",
(c1&0x80) ? "dis" : " en");
p += sprintf(p, "--------------- drive0 --------- drive1 "
"-------- drive0 ---------- drive1 ------\n");
p += sprintf(p, "DMA enabled: %s %s "
" %s %s\n",
(c0&0x20) ? "yes" : "no ",
(c0&0x40) ? "yes" : "no ",
(c1&0x20) ? "yes" : "no ",
(c1&0x40) ? "yes" : "no " );
p += sprintf(p, "UDMA\n");
p += sprintf(p, "DMA\n");
p += sprintf(p, "PIO\n");
return p-buffer;
}
#endif /* DISPLAY_CS5530_TIMINGS && CONFIG_PROC_FS */
/** /**
* cs5530_xfer_set_mode - set a new transfer mode at the drive * cs5530_xfer_set_mode - set a new transfer mode at the drive
* @drive: drive to tune * @drive: drive to tune
...@@ -272,14 +222,6 @@ static unsigned int __init init_chipset_cs5530 (struct pci_dev *dev, const char ...@@ -272,14 +222,6 @@ static unsigned int __init init_chipset_cs5530 (struct pci_dev *dev, const char
struct pci_dev *master_0 = NULL, *cs5530_0 = NULL; struct pci_dev *master_0 = NULL, *cs5530_0 = NULL;
unsigned long flags; unsigned long flags;
#if defined(DISPLAY_CS5530_TIMINGS) && defined(CONFIG_PROC_FS)
if (!cs5530_proc) {
cs5530_proc = 1;
bmide_dev = dev;
ide_pci_create_host_proc("cs5530", cs5530_get_info);
}
#endif /* DISPLAY_CS5530_TIMINGS && CONFIG_PROC_FS */
dev = NULL; dev = NULL;
while ((dev = pci_find_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) { while ((dev = pci_find_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) {
switch (dev->device) { switch (dev->device) {
......
...@@ -72,49 +72,6 @@ ...@@ -72,49 +72,6 @@
#include "hpt366.h" #include "hpt366.h"
#if defined(DISPLAY_HPT366_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
#include <linux/proc_fs.h>
#endif /* defined(DISPLAY_HPT366_TIMINGS) && defined(CONFIG_PROC_FS) */
static unsigned int hpt_revision(struct pci_dev *dev);
static unsigned int hpt_minimum_revision(struct pci_dev *dev, int revision);
#if defined(DISPLAY_HPT366_TIMINGS) && defined(CONFIG_PROC_FS)
static u8 hpt366_proc = 0;
static struct pci_dev *hpt_devs[HPT366_MAX_DEVS];
static int n_hpt_devs;
static int hpt366_get_info (char *buffer, char **addr, off_t offset, int count)
{
char *p = buffer;
char *chipset_nums[] = {"366", "366", "368",
"370", "370A", "372",
"302", "371", "374" };
int i, len;
p += sprintf(p, "\n "
"HighPoint HPT366/368/370/372/374\n");
for (i = 0; i < n_hpt_devs; i++) {
struct pci_dev *dev = hpt_devs[i];
unsigned long iobase = dev->resource[4].start;
u32 class_rev = hpt_revision(dev);
u8 c0, c1;
p += sprintf(p, "\nController: %d\n", i);
p += sprintf(p, "Chipset: HPT%s\n", chipset_nums[class_rev]);
p += sprintf(p, "--------------- Primary Channel "
"--------------- Secondary Channel "
"--------------\n");
/* get the bus master status registers */
c0 = inb(iobase + 0x2);
c1 = inb(iobase + 0xa);
p += sprintf(p, "Enabled: %s"
" %s\n",
(c0 & 0x80) ? "no" : "yes",
(c1 & 0x80) ? "no" : "yes");
#if 0 #if 0
if (hpt_minimum_revision(dev, 3)) { if (hpt_minimum_revision(dev, 3)) {
u8 cbl; u8 cbl;
...@@ -128,16 +85,6 @@ static int hpt366_get_info (char *buffer, char **addr, off_t offset, int count) ...@@ -128,16 +85,6 @@ static int hpt366_get_info (char *buffer, char **addr, off_t offset, int count)
(cbl & 0x01) ? 33 : 66); (cbl & 0x01) ? 33 : 66);
p += sprintf(p, "\n"); p += sprintf(p, "\n");
} }
#endif
p += sprintf(p, "--------------- drive0 --------- drive1 "
"------- drive0 ---------- drive1 -------\n");
p += sprintf(p, "DMA capable: %s %s"
" %s %s\n",
(c0 & 0x20) ? "yes" : "no ",
(c0 & 0x40) ? "yes" : "no ",
(c1 & 0x20) ? "yes" : "no ",
(c1 & 0x40) ? "yes" : "no ");
{ {
u8 c2, c3; u8 c2, c3;
/* older revs don't have these registers mapped /* older revs don't have these registers mapped
...@@ -159,15 +106,7 @@ static int hpt366_get_info (char *buffer, char **addr, off_t offset, int count) ...@@ -159,15 +106,7 @@ static int hpt366_get_info (char *buffer, char **addr, off_t offset, int count)
(c3 & 0x80) ? "PIO " : "off "); (c3 & 0x80) ? "PIO " : "off ");
} }
} }
p += sprintf(p, "\n"); #endif
/* p - buffer must be less than 4k! */
len = (p - buffer) - offset;
*addr = buffer + offset;
return len > count ? count : len;
}
#endif /* defined(DISPLAY_HPT366_TIMINGS) && defined(CONFIG_PROC_FS) */
static u32 hpt_revision (struct pci_dev *dev) static u32 hpt_revision (struct pci_dev *dev)
{ {
...@@ -1106,15 +1045,6 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha ...@@ -1106,15 +1045,6 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
if (ret) if (ret)
return ret; return ret;
#if defined(DISPLAY_HPT366_TIMINGS) && defined(CONFIG_PROC_FS)
hpt_devs[n_hpt_devs++] = dev;
if (!hpt366_proc) {
hpt366_proc = 1;
ide_pci_create_host_proc("hpt366", hpt366_get_info);
}
#endif /* DISPLAY_HPT366_TIMINGS && CONFIG_PROC_FS */
return dev->irq; return dev->irq;
} }
......
...@@ -5,8 +5,6 @@ ...@@ -5,8 +5,6 @@
#include <linux/pci.h> #include <linux/pci.h>
#include <linux/ide.h> #include <linux/ide.h>
#define DISPLAY_HPT366_TIMINGS
/* various tuning parameters */ /* various tuning parameters */
#define HPT_RESET_STATE_ENGINE #define HPT_RESET_STATE_ENGINE
#undef HPT_DELAY_INTERRUPT #undef HPT_DELAY_INTERRUPT
......
...@@ -41,61 +41,6 @@ ...@@ -41,61 +41,6 @@
#define PDC202_DEBUG_CABLE 0 #define PDC202_DEBUG_CABLE 0
#if defined(DISPLAY_PDC202XX_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
#include <linux/proc_fs.h>
static u8 pdcnew_proc = 0;
#define PDC202_MAX_DEVS 5
static struct pci_dev *pdc202_devs[PDC202_MAX_DEVS];
static int n_pdc202_devs;
static char * pdcnew_info(char *buf, struct pci_dev *dev)
{
char *p = buf;
p += sprintf(p, "\n ");
switch(dev->device) {
case PCI_DEVICE_ID_PROMISE_20277:
p += sprintf(p, "SBFastTrak 133 Lite"); break;
case PCI_DEVICE_ID_PROMISE_20276:
p += sprintf(p, "MBFastTrak 133 Lite"); break;
case PCI_DEVICE_ID_PROMISE_20275:
p += sprintf(p, "MBUltra133"); break;
case PCI_DEVICE_ID_PROMISE_20271:
p += sprintf(p, "FastTrak TX2000"); break;
case PCI_DEVICE_ID_PROMISE_20270:
p += sprintf(p, "FastTrak LP/TX2/TX4"); break;
case PCI_DEVICE_ID_PROMISE_20269:
p += sprintf(p, "Ultra133 TX2"); break;
case PCI_DEVICE_ID_PROMISE_20268:
p += sprintf(p, "Ultra100 TX2"); break;
default:
p += sprintf(p, "Ultra series"); break;
break;
}
p += sprintf(p, " Chipset.\n");
return (char *)p;
}
static int pdcnew_get_info (char *buffer, char **addr, off_t offset, int count)
{
char *p = buffer;
int i, len;
for (i = 0; i < n_pdc202_devs; i++) {
struct pci_dev *dev = pdc202_devs[i];
p = pdcnew_info(buffer, dev);
}
/* p - buffer must be less than 4k! */
len = (p - buffer) - offset;
*addr = buffer + offset;
return len > count ? count : len;
}
#endif /* defined(DISPLAY_PDC202XX_TIMINGS) && defined(CONFIG_PROC_FS) */
static u8 pdcnew_ratemask (ide_drive_t *drive) static u8 pdcnew_ratemask (ide_drive_t *drive)
{ {
u8 mode; u8 mode;
...@@ -417,15 +362,6 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha ...@@ -417,15 +362,6 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha
apple_kiwi_init(dev); apple_kiwi_init(dev);
#endif #endif
#if defined(DISPLAY_PDC202XX_TIMINGS) && defined(CONFIG_PROC_FS)
pdc202_devs[n_pdc202_devs++] = dev;
if (!pdcnew_proc) {
pdcnew_proc = 1;
ide_pci_create_host_proc("pdcnew", pdcnew_get_info);
}
#endif /* DISPLAY_PDC202XX_TIMINGS && CONFIG_PROC_FS */
return dev->irq; return dev->irq;
} }
......
...@@ -43,8 +43,6 @@ const static char *pdc_quirk_drives[] = { ...@@ -43,8 +43,6 @@ const static char *pdc_quirk_drives[] = {
set_2regs(0x13,(c)); \ set_2regs(0x13,(c)); \
} while(0) } while(0)
#define DISPLAY_PDC202XX_TIMINGS
static void init_setup_pdcnew(struct pci_dev *, ide_pci_device_t *); static void init_setup_pdcnew(struct pci_dev *, ide_pci_device_t *);
static void init_setup_pdc20270(struct pci_dev *, ide_pci_device_t *); static void init_setup_pdc20270(struct pci_dev *, ide_pci_device_t *);
static void init_setup_pdc20276(struct pci_dev *dev, ide_pci_device_t *d); static void init_setup_pdc20276(struct pci_dev *dev, ide_pci_device_t *d);
......
...@@ -50,68 +50,14 @@ ...@@ -50,68 +50,14 @@
#define PDC202_DEBUG_CABLE 0 #define PDC202_DEBUG_CABLE 0
#if defined(DISPLAY_PDC202XX_TIMINGS) && defined(CONFIG_PROC_FS) #if 0
#include <linux/stat.h>
#include <linux/proc_fs.h>
static u8 pdc202xx_proc = 0;
#define PDC202_MAX_DEVS 5
static struct pci_dev *pdc202_devs[PDC202_MAX_DEVS];
static int n_pdc202_devs;
static char * pdc202xx_info (char *buf, struct pci_dev *dev)
{
char *p = buf;
unsigned long bibma = pci_resource_start(dev, 4); unsigned long bibma = pci_resource_start(dev, 4);
u32 reg60h = 0, reg64h = 0, reg68h = 0, reg6ch = 0;
u16 reg50h = 0, pmask = (1<<10), smask = (1<<11);
u8 hi = 0, lo = 0; u8 hi = 0, lo = 0;
/*
* at that point bibma+0x2 et bibma+0xa are byte registers
* to investigate:
*/
u8 c0 = inb_p((u16)bibma + 0x02);
u8 c1 = inb_p((u16)bibma + 0x0a);
u8 sc11 = inb_p((u16)bibma + 0x11);
u8 sc1a = inb_p((u16)bibma + 0x1a);
u8 sc1b = inb_p((u16)bibma + 0x1b);
u8 sc1c = inb_p((u16)bibma + 0x1c); u8 sc1c = inb_p((u16)bibma + 0x1c);
u8 sc1d = inb_p((u16)bibma + 0x1d);
u8 sc1e = inb_p((u16)bibma + 0x1e); u8 sc1e = inb_p((u16)bibma + 0x1e);
u8 sc1f = inb_p((u16)bibma + 0x1f); u8 sc1f = inb_p((u16)bibma + 0x1f);
pci_read_config_word(dev, 0x50, &reg50h);
pci_read_config_dword(dev, 0x60, &reg60h);
pci_read_config_dword(dev, 0x64, &reg64h);
pci_read_config_dword(dev, 0x68, &reg68h);
pci_read_config_dword(dev, 0x6c, &reg6ch);
p += sprintf(p, "\n ");
switch(dev->device) {
case PCI_DEVICE_ID_PROMISE_20267:
p += sprintf(p, "Ultra100"); break;
case PCI_DEVICE_ID_PROMISE_20265:
p += sprintf(p, "Ultra100 on M/B"); break;
case PCI_DEVICE_ID_PROMISE_20263:
p += sprintf(p, "FastTrak 66"); break;
case PCI_DEVICE_ID_PROMISE_20262:
p += sprintf(p, "Ultra66"); break;
case PCI_DEVICE_ID_PROMISE_20246:
p += sprintf(p, "Ultra33");
reg50h |= 0x0c00;
break;
default:
p += sprintf(p, "Ultra Series"); break;
}
p += sprintf(p, " Chipset.\n");
p += sprintf(p, "------------------------------- General Status "
"---------------------------------\n");
p += sprintf(p, "Burst Mode : %sabled\n",
(sc1f & 0x01) ? "en" : "dis");
p += sprintf(p, "Host Mode : %s\n", p += sprintf(p, "Host Mode : %s\n",
(sc1f & 0x08) ? "Tri-Stated" : "Normal"); (sc1f & 0x08) ? "Tri-Stated" : "Normal");
p += sprintf(p, "Bus Clocking : %s\n", p += sprintf(p, "Bus Clocking : %s\n",
...@@ -126,70 +72,7 @@ static char * pdc202xx_info (char *buf, struct pci_dev *dev) ...@@ -126,70 +72,7 @@ static char * pdc202xx_info (char *buf, struct pci_dev *dev)
SPLIT_BYTE(sc1e, hi, lo); SPLIT_BYTE(sc1e, hi, lo);
p += sprintf(p, "Status Polling Period : %d\n", hi); p += sprintf(p, "Status Polling Period : %d\n", hi);
p += sprintf(p, "Interrupt Check Status Polling Delay : %d\n", lo); p += sprintf(p, "Interrupt Check Status Polling Delay : %d\n", lo);
p += sprintf(p, "--------------- Primary Channel "
"---------------- Secondary Channel "
"-------------\n");
p += sprintf(p, " %s %s\n",
(c0&0x80)?"disabled":"enabled ",
(c1&0x80)?"disabled":"enabled ");
p += sprintf(p, "66 Clocking %s %s\n",
(sc11&0x02)?"enabled ":"disabled",
(sc11&0x08)?"enabled ":"disabled");
p += sprintf(p, " Mode %s Mode %s\n",
(sc1a & 0x01) ? "MASTER" : "PCI ",
(sc1b & 0x01) ? "MASTER" : "PCI ");
p += sprintf(p, " %s %s\n",
(sc1d & 0x08) ? "Error " :
((sc1d & 0x05) == 0x05) ? "Not My INTR " :
(sc1d & 0x04) ? "Interrupting" :
(sc1d & 0x02) ? "FIFO Full " :
(sc1d & 0x01) ? "FIFO Empty " : "????????????",
(sc1d & 0x80) ? "Error " :
((sc1d & 0x50) == 0x50) ? "Not My INTR " :
(sc1d & 0x40) ? "Interrupting" :
(sc1d & 0x20) ? "FIFO Full " :
(sc1d & 0x10) ? "FIFO Empty " : "????????????");
p += sprintf(p, "--------------- drive0 --------- drive1 "
"-------- drive0 ---------- drive1 ------\n");
p += sprintf(p, "DMA enabled: %s %s "
" %s %s\n",
(c0&0x20)?"yes":"no ", (c0&0x40)?"yes":"no ",
(c1&0x20)?"yes":"no ", (c1&0x40)?"yes":"no ");
p += sprintf(p, "DMA Mode: %s %s "
" %s %s\n",
pdc202xx_ultra_verbose(reg60h, (reg50h & pmask)),
pdc202xx_ultra_verbose(reg64h, (reg50h & pmask)),
pdc202xx_ultra_verbose(reg68h, (reg50h & smask)),
pdc202xx_ultra_verbose(reg6ch, (reg50h & smask)));
p += sprintf(p, "PIO Mode: %s %s "
" %s %s\n",
pdc202xx_pio_verbose(reg60h),
pdc202xx_pio_verbose(reg64h),
pdc202xx_pio_verbose(reg68h),
pdc202xx_pio_verbose(reg6ch));
#if 0
p += sprintf(p, "--------------- Can ATAPI DMA ---------------\n");
#endif #endif
return (char *)p;
}
static int pdc202xx_get_info (char *buffer, char **addr, off_t offset, int count)
{
char *p = buffer;
int i, len;
for (i = 0; i < n_pdc202_devs; i++) {
struct pci_dev *dev = pdc202_devs[i];
p = pdc202xx_info(buffer, dev);
}
/* p - buffer must be less than 4k! */
len = (p - buffer) - offset;
*addr = buffer + offset;
return len > count ? count : len;
}
#endif /* defined(DISPLAY_PDC202XX_TIMINGS) && defined(CONFIG_PROC_FS) */
static u8 pdc202xx_ratemask (ide_drive_t *drive) static u8 pdc202xx_ratemask (ide_drive_t *drive)
{ {
...@@ -546,11 +429,13 @@ static int pdc202xx_old_ide_dma_test_irq(ide_drive_t *drive) ...@@ -546,11 +429,13 @@ static int pdc202xx_old_ide_dma_test_irq(ide_drive_t *drive)
u8 sc1d = hwif->INB((high_16 + 0x001d)); u8 sc1d = hwif->INB((high_16 + 0x001d));
if (hwif->channel) { if (hwif->channel) {
/* bit7: Error, bit6: Interrupting, bit5: FIFO Full, bit4: FIFO Empty */
if ((sc1d & 0x50) == 0x50) if ((sc1d & 0x50) == 0x50)
goto somebody_else; goto somebody_else;
else if ((sc1d & 0x40) == 0x40) else if ((sc1d & 0x40) == 0x40)
return (dma_stat & 4) == 4; return (dma_stat & 4) == 4;
} else { } else {
/* bit3: Error, bit2: Interrupting, bit1: FIFO Full, bit0: FIFO Empty */
if ((sc1d & 0x05) == 0x05) if ((sc1d & 0x05) == 0x05)
goto somebody_else; goto somebody_else;
else if ((sc1d & 0x04) == 0x04) else if ((sc1d & 0x04) == 0x04)
...@@ -668,15 +553,6 @@ static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev, const c ...@@ -668,15 +553,6 @@ static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev, const c
name, dev->resource[PCI_ROM_RESOURCE].start); name, dev->resource[PCI_ROM_RESOURCE].start);
} }
#if defined(DISPLAY_PDC202XX_TIMINGS) && defined(CONFIG_PROC_FS)
pdc202_devs[n_pdc202_devs++] = dev;
if (!pdc202xx_proc) {
pdc202xx_proc = 1;
ide_pci_create_host_proc("pdc202xx", pdc202xx_get_info);
}
#endif /* DISPLAY_PDC202XX_TIMINGS && CONFIG_PROC_FS */
/* /*
* software reset - this is required because the bios * software reset - this is required because the bios
* will set UDMA timing on if the hdd supports it. The * will set UDMA timing on if the hdd supports it. The
......
...@@ -23,41 +23,6 @@ static const char *pdc_quirk_drives[] = { ...@@ -23,41 +23,6 @@ static const char *pdc_quirk_drives[] = {
NULL NULL
}; };
static inline u8 *pdc202xx_pio_verbose (u32 drive_pci)
{
if ((drive_pci & 0x000ff000) == 0x000ff000) return("NOTSET");
if ((drive_pci & 0x00000401) == 0x00000401) return("PIO 4");
if ((drive_pci & 0x00000602) == 0x00000602) return("PIO 3");
if ((drive_pci & 0x00000803) == 0x00000803) return("PIO 2");
if ((drive_pci & 0x00000C05) == 0x00000C05) return("PIO 1");
if ((drive_pci & 0x00001309) == 0x00001309) return("PIO 0");
return("PIO ?");
}
static inline u8 *pdc202xx_dma_verbose (u32 drive_pci)
{
if ((drive_pci & 0x00036000) == 0x00036000) return("MWDMA 2");
if ((drive_pci & 0x00046000) == 0x00046000) return("MWDMA 1");
if ((drive_pci & 0x00056000) == 0x00056000) return("MWDMA 0");
if ((drive_pci & 0x00056000) == 0x00056000) return("SWDMA 2");
if ((drive_pci & 0x00068000) == 0x00068000) return("SWDMA 1");
if ((drive_pci & 0x000BC000) == 0x000BC000) return("SWDMA 0");
return("PIO---");
}
static inline u8 *pdc202xx_ultra_verbose (u32 drive_pci, u16 slow_cable)
{
if ((drive_pci & 0x000ff000) == 0x000ff000)
return("NOTSET");
if ((drive_pci & 0x00012000) == 0x00012000)
return((slow_cable) ? "UDMA 2" : "UDMA 4");
if ((drive_pci & 0x00024000) == 0x00024000)
return((slow_cable) ? "UDMA 1" : "UDMA 3");
if ((drive_pci & 0x00036000) == 0x00036000)
return("UDMA 0");
return(pdc202xx_dma_verbose(drive_pci));
}
/* A Register */ /* A Register */
#define SYNC_ERRDY_EN 0xC0 #define SYNC_ERRDY_EN 0xC0
...@@ -98,8 +63,6 @@ static inline u8 *pdc202xx_ultra_verbose (u32 drive_pci, u16 slow_cable) ...@@ -98,8 +63,6 @@ static inline u8 *pdc202xx_ultra_verbose (u32 drive_pci, u16 slow_cable)
#define MC1 0x02 /* DMA"C" timing */ #define MC1 0x02 /* DMA"C" timing */
#define MC0 0x01 /* DMA"C" timing */ #define MC0 0x01 /* DMA"C" timing */
#define DISPLAY_PDC202XX_TIMINGS
static void init_setup_pdc202ata4(struct pci_dev *dev, ide_pci_device_t *d); static void init_setup_pdc202ata4(struct pci_dev *dev, ide_pci_device_t *d);
static void init_setup_pdc20265(struct pci_dev *, ide_pci_device_t *); static void init_setup_pdc20265(struct pci_dev *, ide_pci_device_t *);
static void init_setup_pdc202xx(struct pci_dev *, ide_pci_device_t *); static void init_setup_pdc202xx(struct pci_dev *, ide_pci_device_t *);
......
...@@ -106,165 +106,6 @@ ...@@ -106,165 +106,6 @@
#include "piix.h" #include "piix.h"
static int no_piix_dma; static int no_piix_dma;
#if defined(DISPLAY_PIIX_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
#include <linux/proc_fs.h>
static u8 piix_proc = 0;
#define PIIX_MAX_DEVS 5
static struct pci_dev *piix_devs[PIIX_MAX_DEVS];
static int n_piix_devs;
/**
* piix_get_info - fill in /proc for PIIX ide
* @buffer: buffer to fill
* @addr: address of user start in buffer
* @offset: offset into 'file'
* @count: buffer count
*
* Walks the PIIX devices and outputs summary data on the tuning and
* anything else that will help with debugging
*/
static int piix_get_info (char *buffer, char **addr, off_t offset, int count)
{
char *p = buffer;
int i;
for (i = 0; i < n_piix_devs; i++) {
struct pci_dev *dev = piix_devs[i];
unsigned long bibma = pci_resource_start(dev, 4);
u16 reg40 = 0, psitre = 0, reg42 = 0, ssitre = 0;
u8 c0 = 0, c1 = 0, reg54 = 0, reg55 = 0;
u8 reg44 = 0, reg48 = 0, reg4a = 0, reg4b = 0;
p += sprintf(p, "\nController: %d\n", i);
p += sprintf(p, "\n Intel ");
switch(dev->device) {
case PCI_DEVICE_ID_INTEL_82801EB_1:
p += sprintf(p, "PIIX4 SATA 150 ");
break;
case PCI_DEVICE_ID_INTEL_82801BA_8:
case PCI_DEVICE_ID_INTEL_82801BA_9:
case PCI_DEVICE_ID_INTEL_82801CA_10:
case PCI_DEVICE_ID_INTEL_82801CA_11:
case PCI_DEVICE_ID_INTEL_82801DB_10:
case PCI_DEVICE_ID_INTEL_82801DB_11:
case PCI_DEVICE_ID_INTEL_82801EB_11:
case PCI_DEVICE_ID_INTEL_82801E_11:
case PCI_DEVICE_ID_INTEL_ESB_2:
case PCI_DEVICE_ID_INTEL_ICH6_19:
p += sprintf(p, "PIIX4 Ultra 100 ");
break;
case PCI_DEVICE_ID_INTEL_82372FB_1:
case PCI_DEVICE_ID_INTEL_82801AA_1:
p += sprintf(p, "PIIX4 Ultra 66 ");
break;
case PCI_DEVICE_ID_INTEL_82451NX:
case PCI_DEVICE_ID_INTEL_82801AB_1:
case PCI_DEVICE_ID_INTEL_82443MX_1:
case PCI_DEVICE_ID_INTEL_82371AB:
p += sprintf(p, "PIIX4 Ultra 33 ");
break;
case PCI_DEVICE_ID_INTEL_82371SB_1:
p += sprintf(p, "PIIX3 ");
break;
case PCI_DEVICE_ID_INTEL_82371MX:
p += sprintf(p, "MPIIX ");
break;
case PCI_DEVICE_ID_INTEL_82371FB_1:
case PCI_DEVICE_ID_INTEL_82371FB_0:
default:
p += sprintf(p, "PIIX ");
break;
}
p += sprintf(p, "Chipset.\n");
if (dev->device == PCI_DEVICE_ID_INTEL_82371MX)
continue;
pci_read_config_word(dev, 0x40, &reg40);
pci_read_config_word(dev, 0x42, &reg42);
pci_read_config_byte(dev, 0x44, &reg44);
pci_read_config_byte(dev, 0x48, &reg48);
pci_read_config_byte(dev, 0x4a, &reg4a);
pci_read_config_byte(dev, 0x4b, &reg4b);
pci_read_config_byte(dev, 0x54, &reg54);
pci_read_config_byte(dev, 0x55, &reg55);
psitre = (reg40 & 0x4000) ? 1 : 0;
ssitre = (reg42 & 0x4000) ? 1 : 0;
/*
* at that point bibma+0x2 et bibma+0xa are byte registers
* to investigate:
*/
c0 = inb(bibma + 0x02);
c1 = inb(bibma + 0x0a);
p += sprintf(p, "--------------- Primary Channel "
"---------------- Secondary Channel "
"-------------\n");
p += sprintf(p, " %sabled "
" %sabled\n",
(c0&0x80) ? "dis" : " en",
(c1&0x80) ? "dis" : " en");
p += sprintf(p, "--------------- drive0 --------- drive1 "
"-------- drive0 ---------- drive1 ------\n");
p += sprintf(p, "DMA enabled: %s %s "
" %s %s\n",
(c0&0x20) ? "yes" : "no ",
(c0&0x40) ? "yes" : "no ",
(c1&0x20) ? "yes" : "no ",
(c1&0x40) ? "yes" : "no " );
p += sprintf(p, "UDMA enabled: %s %s "
" %s %s\n",
(reg48&0x01) ? "yes" : "no ",
(reg48&0x02) ? "yes" : "no ",
(reg48&0x04) ? "yes" : "no ",
(reg48&0x08) ? "yes" : "no " );
p += sprintf(p, "UDMA enabled: %s %s "
" %s %s\n",
((reg54&0x11) &&
(reg55&0x10) && (reg4a&0x01)) ? "5" :
((reg54&0x11) && (reg4a&0x02)) ? "4" :
((reg54&0x11) && (reg4a&0x01)) ? "3" :
(reg4a&0x02) ? "2" :
(reg4a&0x01) ? "1" :
(reg4a&0x00) ? "0" : "X",
((reg54&0x22) &&
(reg55&0x20) && (reg4a&0x10)) ? "5" :
((reg54&0x22) && (reg4a&0x20)) ? "4" :
((reg54&0x22) && (reg4a&0x10)) ? "3" :
(reg4a&0x20) ? "2" :
(reg4a&0x10) ? "1" :
(reg4a&0x00) ? "0" : "X",
((reg54&0x44) &&
(reg55&0x40) && (reg4b&0x03)) ? "5" :
((reg54&0x44) && (reg4b&0x02)) ? "4" :
((reg54&0x44) && (reg4b&0x01)) ? "3" :
(reg4b&0x02) ? "2" :
(reg4b&0x01) ? "1" :
(reg4b&0x00) ? "0" : "X",
((reg54&0x88) &&
(reg55&0x80) && (reg4b&0x30)) ? "5" :
((reg54&0x88) && (reg4b&0x20)) ? "4" :
((reg54&0x88) && (reg4b&0x10)) ? "3" :
(reg4b&0x20) ? "2" :
(reg4b&0x10) ? "1" :
(reg4b&0x00) ? "0" : "X");
p += sprintf(p, "UDMA\n");
p += sprintf(p, "DMA\n");
p += sprintf(p, "PIO\n");
/*
* FIXME.... Add configuration junk data....blah blah......
*/
}
return p-buffer; /* => must be less than 4k! */
}
#endif /* defined(DISPLAY_PIIX_TIMINGS) && defined(CONFIG_PROC_FS) */
/** /**
* piix_ratemask - compute rate mask for PIIX IDE * piix_ratemask - compute rate mask for PIIX IDE
...@@ -627,14 +468,6 @@ static unsigned int __devinit init_chipset_piix (struct pci_dev *dev, const char ...@@ -627,14 +468,6 @@ static unsigned int __devinit init_chipset_piix (struct pci_dev *dev, const char
break; break;
} }
#if defined(DISPLAY_PIIX_TIMINGS) && defined(CONFIG_PROC_FS)
piix_devs[n_piix_devs++] = dev;
if (!piix_proc) {
piix_proc = 1;
ide_pci_create_host_proc("piix", piix_get_info);
}
#endif /* DISPLAY_PIIX_TIMINGS && CONFIG_PROC_FS */
return 0; return 0;
} }
......
...@@ -5,10 +5,6 @@ ...@@ -5,10 +5,6 @@
#include <linux/pci.h> #include <linux/pci.h>
#include <linux/ide.h> #include <linux/ide.h>
#define PIIX_DEBUG_DRIVE_INFO 0
#define DISPLAY_PIIX_TIMINGS
static void init_setup_piix(struct pci_dev *, ide_pci_device_t *); static void init_setup_piix(struct pci_dev *, ide_pci_device_t *);
static unsigned int __devinit init_chipset_piix(struct pci_dev *, const char *); static unsigned int __devinit init_chipset_piix(struct pci_dev *, const char *);
static void init_hwif_piix(ide_hwif_t *); static void init_hwif_piix(ide_hwif_t *);
......
...@@ -67,55 +67,6 @@ static unsigned short sc1200_get_pci_clock (void) ...@@ -67,55 +67,6 @@ static unsigned short sc1200_get_pci_clock (void)
return pci_clock; return pci_clock;
} }
#define DISPLAY_SC1200_TIMINGS
#if defined(DISPLAY_SC1200_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
#include <linux/proc_fs.h>
static int sc1200_get_info(char *, char **, off_t, int);
extern int (*sc1200_display_info)(char *, char **, off_t, int); /* ide-proc.c */
extern char *ide_media_verbose(ide_drive_t *);
static u8 sc1200_proc = 0;
static struct pci_dev *bmide_dev;
static int sc1200_get_info (char *buffer, char **addr, off_t offset, int count)
{
char *p = buffer;
unsigned long bibma = pci_resource_start(bmide_dev, 4);
int len;
u8 c0 = 0, c1 = 0;
/*
* at that point bibma+0x2 et bibma+0xa are byte registers
* to investigate:
*/
c0 = inb_p(bibma + 0x02);
c1 = inb_p(bibma + 0x0a);
p += sprintf(p, "\n National SCx200 Chipset.\n");
p += sprintf(p, "--------------- Primary Channel ---------------- Secondary Channel -------------\n");
p += sprintf(p, " %sabled %sabled\n",
(c0&0x80) ? "dis" : " en",
(c1&0x80) ? "dis" : " en");
p += sprintf(p, "--------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------\n");
p += sprintf(p, "DMA enabled: %s %s %s %s\n",
(c0&0x20) ? "yes" : "no ", (c0&0x40) ? "yes" : "no ",
(c1&0x20) ? "yes" : "no ", (c1&0x40) ? "yes" : "no " );
p += sprintf(p, "UDMA\n");
p += sprintf(p, "DMA\n");
p += sprintf(p, "PIO\n");
len = (p - buffer) - offset;
*addr = buffer + offset;
return len > count ? count : len;
}
#endif /* DISPLAY_SC1200_TIMINGS && CONFIG_PROC_FS */
extern char *ide_xfer_verbose (byte xfer_rate); extern char *ide_xfer_verbose (byte xfer_rate);
/* /*
...@@ -504,21 +455,6 @@ printk("%s: SC1200: resume\n", hwif->name); ...@@ -504,21 +455,6 @@ printk("%s: SC1200: resume\n", hwif->name);
return 0; return 0;
} }
/*
* Initialize the sc1200 bridge for reliable IDE DMA operation.
*/
static unsigned int __init init_chipset_sc1200 (struct pci_dev *dev, const char *name)
{
#if defined(DISPLAY_SC1200_TIMINGS) && defined(CONFIG_PROC_FS)
if (!bmide_dev) {
sc1200_proc = 1;
bmide_dev = dev;
ide_pci_create_host_proc("sc1200", sc1200_get_info);
}
#endif /* DISPLAY_SC1200_TIMINGS && CONFIG_PROC_FS */
return 0;
}
/* /*
* This gets invoked by the IDE driver once for each channel, * This gets invoked by the IDE driver once for each channel,
* and performs channel-specific pre-initialization before drive probing. * and performs channel-specific pre-initialization before drive probing.
...@@ -545,7 +481,6 @@ static void __init init_hwif_sc1200 (ide_hwif_t *hwif) ...@@ -545,7 +481,6 @@ static void __init init_hwif_sc1200 (ide_hwif_t *hwif)
static ide_pci_device_t sc1200_chipset __devinitdata = { static ide_pci_device_t sc1200_chipset __devinitdata = {
.name = "SC1200", .name = "SC1200",
.init_chipset = init_chipset_sc1200,
.init_hwif = init_hwif_sc1200, .init_hwif = init_hwif_sc1200,
.channels = 2, .channels = 2,
.autodma = AUTODMA, .autodma = AUTODMA,
......
...@@ -44,164 +44,6 @@ ...@@ -44,164 +44,6 @@
static u8 svwks_revision = 0; static u8 svwks_revision = 0;
static struct pci_dev *isa_dev; static struct pci_dev *isa_dev;
#if defined(DISPLAY_SVWKS_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
#include <linux/proc_fs.h>
static u8 svwks_proc = 0;
#define SVWKS_MAX_DEVS 2
static struct pci_dev *svwks_devs[SVWKS_MAX_DEVS];
static int n_svwks_devs;
static int svwks_get_info (char *buffer, char **addr, off_t offset, int count)
{
char *p = buffer;
int i, len;
p += sprintf(p, "\n "
"ServerWorks OSB4/CSB5/CSB6\n");
for (i = 0; i < n_svwks_devs; i++) {
struct pci_dev *dev = svwks_devs[i];
unsigned long bibma = pci_resource_start(dev, 4);
u32 reg40, reg44;
u16 reg48, reg56;
u8 reg54, c0=0, c1=0;
pci_read_config_dword(dev, 0x40, &reg40);
pci_read_config_dword(dev, 0x44, &reg44);
pci_read_config_word(dev, 0x48, &reg48);
pci_read_config_byte(dev, 0x54, &reg54);
pci_read_config_word(dev, 0x56, &reg56);
/*
* at that point bibma+0x2 et bibma+0xa are byte registers
* to investigate:
*/
c0 = inb_p(bibma + 0x02);
c1 = inb_p(bibma + 0x0a);
p += sprintf(p, "\n ServerWorks ");
switch(dev->device) {
case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
p += sprintf(p, "CSB6 ");
break;
case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
p += sprintf(p, "CSB5 ");
break;
case PCI_DEVICE_ID_SERVERWORKS_OSB4IDE:
p += sprintf(p, "OSB4 ");
break;
default:
p += sprintf(p, "%04x ", dev->device);
break;
}
p += sprintf(p, "Chipset (rev %02x)\n", svwks_revision);
p += sprintf(p, "------------------------------- "
"General Status "
"---------------------------------\n");
p += sprintf(p, "--------------- Primary Channel "
"---------------- Secondary Channel "
"-------------\n");
p += sprintf(p, " %sabled"
" %sabled\n",
(c0&0x80) ? "dis" : " en",
(c1&0x80) ? "dis" : " en");
p += sprintf(p, "--------------- drive0 --------- drive1 "
"-------- drive0 ---------- drive1 ------\n");
p += sprintf(p, "DMA enabled: %s %s"
" %s %s\n",
(c0&0x20) ? "yes" : "no ",
(c0&0x40) ? "yes" : "no ",
(c1&0x20) ? "yes" : "no ",
(c1&0x40) ? "yes" : "no " );
p += sprintf(p, "UDMA enabled: %s %s"
" %s %s\n",
(reg54 & 0x01) ? "yes" : "no ",
(reg54 & 0x02) ? "yes" : "no ",
(reg54 & 0x04) ? "yes" : "no ",
(reg54 & 0x08) ? "yes" : "no " );
p += sprintf(p, "UDMA enabled: %s %s"
" %s %s\n",
((reg56&0x0005)==0x0005)?"5":
((reg56&0x0004)==0x0004)?"4":
((reg56&0x0003)==0x0003)?"3":
((reg56&0x0002)==0x0002)?"2":
((reg56&0x0001)==0x0001)?"1":
((reg56&0x000F))?"?":"0",
((reg56&0x0050)==0x0050)?"5":
((reg56&0x0040)==0x0040)?"4":
((reg56&0x0030)==0x0030)?"3":
((reg56&0x0020)==0x0020)?"2":
((reg56&0x0010)==0x0010)?"1":
((reg56&0x00F0))?"?":"0",
((reg56&0x0500)==0x0500)?"5":
((reg56&0x0400)==0x0400)?"4":
((reg56&0x0300)==0x0300)?"3":
((reg56&0x0200)==0x0200)?"2":
((reg56&0x0100)==0x0100)?"1":
((reg56&0x0F00))?"?":"0",
((reg56&0x5000)==0x5000)?"5":
((reg56&0x4000)==0x4000)?"4":
((reg56&0x3000)==0x3000)?"3":
((reg56&0x2000)==0x2000)?"2":
((reg56&0x1000)==0x1000)?"1":
((reg56&0xF000))?"?":"0");
p += sprintf(p, "DMA enabled: %s %s"
" %s %s\n",
((reg44&0x00002000)==0x00002000)?"2":
((reg44&0x00002100)==0x00002100)?"1":
((reg44&0x00007700)==0x00007700)?"0":
((reg44&0x0000FF00)==0x0000FF00)?"X":"?",
((reg44&0x00000020)==0x00000020)?"2":
((reg44&0x00000021)==0x00000021)?"1":
((reg44&0x00000077)==0x00000077)?"0":
((reg44&0x000000FF)==0x000000FF)?"X":"?",
((reg44&0x20000000)==0x20000000)?"2":
((reg44&0x21000000)==0x21000000)?"1":
((reg44&0x77000000)==0x77000000)?"0":
((reg44&0xFF000000)==0xFF000000)?"X":"?",
((reg44&0x00200000)==0x00200000)?"2":
((reg44&0x00210000)==0x00210000)?"1":
((reg44&0x00770000)==0x00770000)?"0":
((reg44&0x00FF0000)==0x00FF0000)?"X":"?");
p += sprintf(p, "PIO enabled: %s %s"
" %s %s\n",
((reg40&0x00002000)==0x00002000)?"4":
((reg40&0x00002200)==0x00002200)?"3":
((reg40&0x00003400)==0x00003400)?"2":
((reg40&0x00004700)==0x00004700)?"1":
((reg40&0x00005D00)==0x00005D00)?"0":"?",
((reg40&0x00000020)==0x00000020)?"4":
((reg40&0x00000022)==0x00000022)?"3":
((reg40&0x00000034)==0x00000034)?"2":
((reg40&0x00000047)==0x00000047)?"1":
((reg40&0x0000005D)==0x0000005D)?"0":"?",
((reg40&0x20000000)==0x20000000)?"4":
((reg40&0x22000000)==0x22000000)?"3":
((reg40&0x34000000)==0x34000000)?"2":
((reg40&0x47000000)==0x47000000)?"1":
((reg40&0x5D000000)==0x5D000000)?"0":"?",
((reg40&0x00200000)==0x00200000)?"4":
((reg40&0x00220000)==0x00220000)?"3":
((reg40&0x00340000)==0x00340000)?"2":
((reg40&0x00470000)==0x00470000)?"1":
((reg40&0x005D0000)==0x005D0000)?"0":"?");
}
p += sprintf(p, "\n");
/* p - buffer must be less than 4k! */
len = (p - buffer) - offset;
*addr = buffer + offset;
return len > count ? count : len;
}
#endif /* defined(DISPLAY_SVWKS_TIMINGS) && defined(CONFIG_PROC_FS) */
static int check_in_drive_lists (ide_drive_t *drive, const char **list) static int check_in_drive_lists (ide_drive_t *drive, const char **list)
{ {
while (*list) while (*list)
...@@ -617,16 +459,6 @@ static unsigned int __init init_chipset_svwks (struct pci_dev *dev, const char * ...@@ -617,16 +459,6 @@ static unsigned int __init init_chipset_svwks (struct pci_dev *dev, const char *
pci_write_config_byte(dev, 0x5A, btr); pci_write_config_byte(dev, 0x5A, btr);
} }
#if defined(DISPLAY_SVWKS_TIMINGS) && defined(CONFIG_PROC_FS)
svwks_devs[n_svwks_devs++] = dev;
if (!svwks_proc) {
svwks_proc = 1;
ide_pci_create_host_proc("svwks", svwks_get_info);
}
#endif /* DISPLAY_SVWKS_TIMINGS && CONFIG_PROC_FS */
return (dev->irq) ? dev->irq : 0; return (dev->irq) ? dev->irq : 0;
} }
......
...@@ -21,8 +21,6 @@ const char *svwks_bad_ata100[] = { ...@@ -21,8 +21,6 @@ const char *svwks_bad_ata100[] = {
NULL NULL
}; };
#define DISPLAY_SVWKS_TIMINGS 1
static void init_setup_svwks(struct pci_dev *, ide_pci_device_t *); static void init_setup_svwks(struct pci_dev *, ide_pci_device_t *);
static void init_setup_csb6(struct pci_dev *, ide_pci_device_t *); static void init_setup_csb6(struct pci_dev *, ide_pci_device_t *);
static unsigned int init_chipset_svwks(struct pci_dev *, const char *); static unsigned int init_chipset_svwks(struct pci_dev *, const char *);
......
...@@ -21,103 +21,6 @@ ...@@ -21,103 +21,6 @@
#include <asm/io.h> #include <asm/io.h>
#define DISPLAY_SLC90E66_TIMINGS
#if defined(DISPLAY_SLC90E66_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
#include <linux/proc_fs.h>
static u8 slc90e66_proc = 0;
static struct pci_dev *bmide_dev;
static int slc90e66_get_info (char *buffer, char **addr, off_t offset, int count)
{
char *p = buffer;
int len;
unsigned long bibma = pci_resource_start(bmide_dev, 4);
u16 reg40 = 0, psitre = 0, reg42 = 0, ssitre = 0;
u8 c0 = 0, c1 = 0;
u8 reg44 = 0, reg47 = 0, reg48 = 0, reg4a = 0, reg4b = 0;
pci_read_config_word(bmide_dev, 0x40, &reg40);
pci_read_config_word(bmide_dev, 0x42, &reg42);
pci_read_config_byte(bmide_dev, 0x44, &reg44);
pci_read_config_byte(bmide_dev, 0x47, &reg47);
pci_read_config_byte(bmide_dev, 0x48, &reg48);
pci_read_config_byte(bmide_dev, 0x4a, &reg4a);
pci_read_config_byte(bmide_dev, 0x4b, &reg4b);
psitre = (reg40 & 0x4000) ? 1 : 0;
ssitre = (reg42 & 0x4000) ? 1 : 0;
/*
* at that point bibma+0x2 et bibma+0xa are byte registers
* to investigate:
*/
c0 = inb_p(bibma + 0x02);
c1 = inb_p(bibma + 0x0a);
p += sprintf(p, " SLC90E66 Chipset.\n");
p += sprintf(p, "--------------- Primary Channel "
"---------------- Secondary Channel "
"-------------\n");
p += sprintf(p, " %sabled "
" %sabled\n",
(c0&0x80) ? "dis" : " en",
(c1&0x80) ? "dis" : " en");
p += sprintf(p, "--------------- drive0 --------- drive1 "
"-------- drive0 ---------- drive1 ------\n");
p += sprintf(p, "DMA enabled: %s %s "
" %s %s\n",
(c0&0x20) ? "yes" : "no ",
(c0&0x40) ? "yes" : "no ",
(c1&0x20) ? "yes" : "no ",
(c1&0x40) ? "yes" : "no " );
p += sprintf(p, "UDMA enabled: %s %s "
" %s %s\n",
(reg48&0x01) ? "yes" : "no ",
(reg48&0x02) ? "yes" : "no ",
(reg48&0x04) ? "yes" : "no ",
(reg48&0x08) ? "yes" : "no " );
p += sprintf(p, "UDMA enabled: %s %s "
" %s %s\n",
((reg4a&0x04)==0x04) ? "4" :
((reg4a&0x03)==0x03) ? "3" :
(reg4a&0x02) ? "2" :
(reg4a&0x01) ? "1" :
(reg4a&0x00) ? "0" : "X",
((reg4a&0x40)==0x40) ? "4" :
((reg4a&0x30)==0x30) ? "3" :
(reg4a&0x20) ? "2" :
(reg4a&0x10) ? "1" :
(reg4a&0x00) ? "0" : "X",
((reg4b&0x04)==0x04) ? "4" :
((reg4b&0x03)==0x03) ? "3" :
(reg4b&0x02) ? "2" :
(reg4b&0x01) ? "1" :
(reg4b&0x00) ? "0" : "X",
((reg4b&0x40)==0x40) ? "4" :
((reg4b&0x30)==0x30) ? "3" :
(reg4b&0x20) ? "2" :
(reg4b&0x10) ? "1" :
(reg4b&0x00) ? "0" : "X");
p += sprintf(p, "UDMA\n");
p += sprintf(p, "DMA\n");
p += sprintf(p, "PIO\n");
/*
* FIXME.... Add configuration junk data....blah blah......
*/
/* p - buffer must be less than 4k! */
len = (p - buffer) - offset;
*addr = buffer + offset;
return len > count ? count : len;
}
#endif /* defined(DISPLAY_SLC90E66_TIMINGS) && defined(CONFIG_PROC_FS) */
static u8 slc90e66_ratemask (ide_drive_t *drive) static u8 slc90e66_ratemask (ide_drive_t *drive)
{ {
u8 mode = 2; u8 mode = 2;
...@@ -236,6 +139,7 @@ static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed) ...@@ -236,6 +139,7 @@ static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed)
if (speed >= XFER_UDMA_0) { if (speed >= XFER_UDMA_0) {
if (!(reg48 & u_flag)) if (!(reg48 & u_flag))
pci_write_config_word(dev, 0x48, reg48|u_flag); pci_write_config_word(dev, 0x48, reg48|u_flag);
/* FIXME: (reg4a & a_speed) ? */
if ((reg4a & u_speed) != u_speed) { if ((reg4a & u_speed) != u_speed) {
pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
pci_read_config_word(dev, 0x4a, &reg4a); pci_read_config_word(dev, 0x4a, &reg4a);
...@@ -313,18 +217,6 @@ static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive) ...@@ -313,18 +217,6 @@ static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive)
} }
#endif /* CONFIG_BLK_DEV_IDEDMA */ #endif /* CONFIG_BLK_DEV_IDEDMA */
static unsigned int __init init_chipset_slc90e66 (struct pci_dev *dev, const char *name)
{
#if defined(DISPLAY_SLC90E66_TIMINGS) && defined(CONFIG_PROC_FS)
if (!slc90e66_proc) {
slc90e66_proc = 1;
bmide_dev = dev;
ide_pci_create_host_proc("slc90e66", slc90e66_get_info);
}
#endif /* DISPLAY_SLC90E66_TIMINGS && CONFIG_PROC_FS */
return 0;
}
static void __init init_hwif_slc90e66 (ide_hwif_t *hwif) static void __init init_hwif_slc90e66 (ide_hwif_t *hwif)
{ {
u8 reg47 = 0; u8 reg47 = 0;
...@@ -366,7 +258,6 @@ static void __init init_hwif_slc90e66 (ide_hwif_t *hwif) ...@@ -366,7 +258,6 @@ static void __init init_hwif_slc90e66 (ide_hwif_t *hwif)
static ide_pci_device_t slc90e66_chipset __devinitdata = { static ide_pci_device_t slc90e66_chipset __devinitdata = {
.name = "SLC90E66", .name = "SLC90E66",
.init_chipset = init_chipset_slc90e66,
.init_hwif = init_hwif_slc90e66, .init_hwif = init_hwif_slc90e66,
.channels = 2, .channels = 2,
.autodma = AUTODMA, .autodma = AUTODMA,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment