Merge tag 'iio-for-4.10d' of...

Merge tag 'iio-for-4.10d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Fourth set of IIO new device support, features and cleaups for the 4.10 cycle.

Probably the final set before the merge window unless things get significantly
delayed.

New device support
* STM32 ADC core
  - new driver.  Interesting device with up to 3 ADCs with complex triggering
    options that will follow later. Note split into an 'mfd like' core that
    handles the interrupt sharing etc between the various instances present and
    a per ADC section that is instantiated as many times as needed.
  - device tree bindings.

Cleanups and minor fixes
* st_accel
  - inline per sensor data as the defines don't add any meaning and make it
    much harder to check if a given sensor has the right values.
* hid-magnetometer
  - sort out the associations of the associated attributes with the two types.

Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt

+STMicroelectronics STM32 ADC device driver
+
+STM32 ADC is a successive approximation analog-to-digital converter.
+It has several multiplexed input channels. Conversions can be performed
+in single, continuous, scan or discontinuous mode. Result of the ADC is
+stored in a left-aligned or right-aligned 32-bit data register.
+Conversions can be launched in software or using hardware triggers.
+
+The analog watchdog feature allows the application to detect if the input
+voltage goes beyond the user-defined, higher or lower thresholds.
+
+Each STM32 ADC block can have up to 3 ADC instances.
+
+Each instance supports two contexts to manage conversions, each one has its
+own configurable sequence and trigger:
+- regular conversion can be done in sequence, running in background
+- injected conversions have higher priority, and so have the ability to
+  interrupt regular conversion sequence (either triggered in SW or HW).
+  Regular sequence is resumed, in case it has been interrupted.
+
+Contents of a stm32 adc root node:
+-----------------------------------
+Required properties:
+- compatible: Should be "st,stm32f4-adc-core".
+- reg: Offset and length of the ADC block register set.
+- interrupts: Must contain the interrupt for ADC block.
+- clocks: Clock for the analog circuitry (common to all ADCs).
+- clock-names: Must be "adc".
+- interrupt-controller: Identifies the controller node as interrupt-parent
+- vref-supply: Phandle to the vref input analog reference voltage.
+- #interrupt-cells = <1>;
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- A pinctrl state named "default" for each ADC channel may be defined to set
+  inX ADC pins in mode of operation for analog input on external pin.
+
+Contents of a stm32 adc child node:
+-----------------------------------
+An ADC block node should contain at least one subnode, representing an
+ADC instance available on the machine.
+
+Required properties:
+- compatible: Should be "st,stm32f4-adc".
+- reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
+- clocks: Input clock private to this ADC instance.
+- interrupt-parent: Phandle to the parent interrupt controller.
+- interrupts: IRQ Line for the ADC (e.g. may be 0 for adc@0, 1 for adc@100 or
+  2 for adc@200).
+- st,adc-channels: List of single-ended channels muxed for this ADC.
+  It can have up to 16 channels, numbered from 0 to 15 (resp. for in0..in15).
+- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in
+  Documentation/devicetree/bindings/iio/iio-bindings.txt
+
+Example:
+	adc: adc@40012000 {
+		compatible = "st,stm32f4-adc-core";
+		reg = <0x40012000 0x400>;
+		interrupts = <18>;
+		clocks = <&rcc 0 168>;
+		clock-names = "adc";
+		vref-supply = <&reg_vref>;
+		interrupt-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&adc3_in8_pin>;
+
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc@0 {
+			compatible = "st,stm32f4-adc";
+			#io-channel-cells = <1>;
+			reg = <0x0>;
+			clocks = <&rcc 0 168>;
+			interrupt-parent = <&adc>;
+			interrupts = <0>;
+			st,adc-channels = <8>;
+		};
+		...
+		other adc child nodes follow...
+	};

drivers/iio/adc/Kconfig

@@ -441,6 +441,28 @@ config ROCKCHIP_SARADC
 	  To compile this driver as a module, choose M here: the
 	  module will be called rockchip_saradc.
 
+config STM32_ADC_CORE
+	tristate "STMicroelectronics STM32 adc core"
+	depends on ARCH_STM32 || COMPILE_TEST
+	depends on OF
+	depends on REGULATOR
+	help
+	  Select this option to enable the core driver for STMicroelectronics
+	  STM32 analog-to-digital converter (ADC).
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called stm32-adc-core.
+
+config STM32_ADC
+	tristate "STMicroelectronics STM32 adc"
+	depends on STM32_ADC_CORE
+	help
+	  Say yes here to build support for STMicroelectronics stm32 Analog
+	  to Digital Converter (ADC).
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called stm32-adc.
+
 config STX104
 	tristate "Apex Embedded Systems STX104 driver"
 	depends on X86 && ISA_BUS_API

drivers/iio/adc/Makefile

@@ -43,6 +43,8 @@ obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
 obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
 obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
 obj-$(CONFIG_STX104) += stx104.o
+obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o
+obj-$(CONFIG_STM32_ADC) += stm32-adc.o
 obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
 obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o
 obj-$(CONFIG_TI_ADC12138) += ti-adc12138.o

drivers/iio/adc/stm32-adc-core.c

+/*
+ * This file is part of STM32 ADC driver
+ *
+ * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
+ * Author: Fabrice Gasnier <fabrice.gasnier@st.com>.
+ *
+ * Inspired from: fsl-imx25-tsadc
+ *
+ * License type: GPLv2
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdesc.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#include "stm32-adc-core.h"
+
+/* STM32F4 - common registers for all ADC instances: 1, 2 & 3 */
+#define STM32F4_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
+#define STM32F4_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x04)
+
+/* STM32F4_ADC_CSR - bit fields */
+#define STM32F4_EOC3			BIT(17)
+#define STM32F4_EOC2			BIT(9)
+#define STM32F4_EOC1			BIT(1)
+
+/* STM32F4_ADC_CCR - bit fields */
+#define STM32F4_ADC_ADCPRE_SHIFT	16
+#define STM32F4_ADC_ADCPRE_MASK		GENMASK(17, 16)
+
+/* STM32 F4 maximum analog clock rate (from datasheet) */
+#define STM32F4_ADC_MAX_CLK_RATE	36000000
+
+/**
+ * struct stm32_adc_priv - stm32 ADC core private data
+ * @irq:		irq for ADC block
+ * @domain:		irq domain reference
+ * @aclk:		clock reference for the analog circuitry
+ * @vref:		regulator reference
+ * @common:		common data for all ADC instances
+ */
+struct stm32_adc_priv {
+	int				irq;
+	struct irq_domain		*domain;
+	struct clk			*aclk;
+	struct regulator		*vref;
+	struct stm32_adc_common		common;
+};
+
+static struct stm32_adc_priv *to_stm32_adc_priv(struct stm32_adc_common *com)
+{
+	return container_of(com, struct stm32_adc_priv, common);
+}
+
+/* STM32F4 ADC internal common clock prescaler division ratios */
+static int stm32f4_pclk_div[] = {2, 4, 6, 8};
+
+/**
+ * stm32f4_adc_clk_sel() - Select stm32f4 ADC common clock prescaler
+ * @priv: stm32 ADC core private data
+ * Select clock prescaler used for analog conversions, before using ADC.
+ */
+static int stm32f4_adc_clk_sel(struct platform_device *pdev,
+			       struct stm32_adc_priv *priv)
+{
+	unsigned long rate;
+	u32 val;
+	int i;
+
+	rate = clk_get_rate(priv->aclk);
+	for (i = 0; i < ARRAY_SIZE(stm32f4_pclk_div); i++) {
+		if ((rate / stm32f4_pclk_div[i]) <= STM32F4_ADC_MAX_CLK_RATE)
+			break;
+	}
+	if (i >= ARRAY_SIZE(stm32f4_pclk_div))
+		return -EINVAL;
+
+	val = readl_relaxed(priv->common.base + STM32F4_ADC_CCR);
+	val &= ~STM32F4_ADC_ADCPRE_MASK;
+	val |= i << STM32F4_ADC_ADCPRE_SHIFT;
+	writel_relaxed(val, priv->common.base + STM32F4_ADC_CCR);
+
+	dev_dbg(&pdev->dev, "Using analog clock source at %ld kHz\n",
+		rate / (stm32f4_pclk_div[i] * 1000));
+
+	return 0;
+}
+
+/* ADC common interrupt for all instances */
+static void stm32_adc_irq_handler(struct irq_desc *desc)
+{
+	struct stm32_adc_priv *priv = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	u32 status;
+
+	chained_irq_enter(chip, desc);
+	status = readl_relaxed(priv->common.base + STM32F4_ADC_CSR);
+
+	if (status & STM32F4_EOC1)
+		generic_handle_irq(irq_find_mapping(priv->domain, 0));
+
+	if (status & STM32F4_EOC2)
+		generic_handle_irq(irq_find_mapping(priv->domain, 1));
+
+	if (status & STM32F4_EOC3)
+		generic_handle_irq(irq_find_mapping(priv->domain, 2));
+
+	chained_irq_exit(chip, desc);
+};
+
+static int stm32_adc_domain_map(struct irq_domain *d, unsigned int irq,
+				irq_hw_number_t hwirq)
+{
+	irq_set_chip_data(irq, d->host_data);
+	irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_level_irq);
+
+	return 0;
+}
+
+static void stm32_adc_domain_unmap(struct irq_domain *d, unsigned int irq)
+{
+	irq_set_chip_and_handler(irq, NULL, NULL);
+	irq_set_chip_data(irq, NULL);
+}
+
+static const struct irq_domain_ops stm32_adc_domain_ops = {
+	.map = stm32_adc_domain_map,
+	.unmap  = stm32_adc_domain_unmap,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+static int stm32_adc_irq_probe(struct platform_device *pdev,
+			       struct stm32_adc_priv *priv)
+{
+	struct device_node *np = pdev->dev.of_node;
+
+	priv->irq = platform_get_irq(pdev, 0);
+	if (priv->irq < 0) {
+		dev_err(&pdev->dev, "failed to get irq\n");
+		return priv->irq;
+	}
+
+	priv->domain = irq_domain_add_simple(np, STM32_ADC_MAX_ADCS, 0,
+					     &stm32_adc_domain_ops,
+					     priv);
+	if (!priv->domain) {
+		dev_err(&pdev->dev, "Failed to add irq domain\n");
+		return -ENOMEM;
+	}
+
+	irq_set_chained_handler(priv->irq, stm32_adc_irq_handler);
+	irq_set_handler_data(priv->irq, priv);
+
+	return 0;
+}
+
+static void stm32_adc_irq_remove(struct platform_device *pdev,
+				 struct stm32_adc_priv *priv)
+{
+	int hwirq;
+
+	for (hwirq = 0; hwirq < STM32_ADC_MAX_ADCS; hwirq++)
+		irq_dispose_mapping(irq_find_mapping(priv->domain, hwirq));
+	irq_domain_remove(priv->domain);
+	irq_set_chained_handler(priv->irq, NULL);
+}
+
+static int stm32_adc_probe(struct platform_device *pdev)
+{
+	struct stm32_adc_priv *priv;
+	struct device_node *np = pdev->dev.of_node;
+	struct resource *res;
+	int ret;
+
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->common.base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->common.base))
+		return PTR_ERR(priv->common.base);
+
+	priv->vref = devm_regulator_get(&pdev->dev, "vref");
+	if (IS_ERR(priv->vref)) {
+		ret = PTR_ERR(priv->vref);
+		dev_err(&pdev->dev, "vref get failed, %d\n", ret);
+		return ret;
+	}
+
+	ret = regulator_enable(priv->vref);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "vref enable failed\n");
+		return ret;
+	}
+
+	ret = regulator_get_voltage(priv->vref);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "vref get voltage failed, %d\n", ret);
+		goto err_regulator_disable;
+	}
+	priv->common.vref_mv = ret / 1000;
+	dev_dbg(&pdev->dev, "vref+=%dmV\n", priv->common.vref_mv);
+
+	priv->aclk = devm_clk_get(&pdev->dev, "adc");
+	if (IS_ERR(priv->aclk)) {
+		ret = PTR_ERR(priv->aclk);
+		dev_err(&pdev->dev, "Can't get 'adc' clock\n");
+		goto err_regulator_disable;
+	}
+
+	ret = clk_prepare_enable(priv->aclk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "adc clk enable failed\n");
+		goto err_regulator_disable;
+	}
+
+	ret = stm32f4_adc_clk_sel(pdev, priv);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "adc clk selection failed\n");
+		goto err_clk_disable;
+	}
+
+	ret = stm32_adc_irq_probe(pdev, priv);
+	if (ret < 0)
+		goto err_clk_disable;
+
+	platform_set_drvdata(pdev, &priv->common);
+
+	ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to populate DT children\n");
+		goto err_irq_remove;
+	}
+
+	return 0;
+
+err_irq_remove:
+	stm32_adc_irq_remove(pdev, priv);
+
+err_clk_disable:
+	clk_disable_unprepare(priv->aclk);
+
+err_regulator_disable:
+	regulator_disable(priv->vref);
+
+	return ret;
+}
+
+static int stm32_adc_remove(struct platform_device *pdev)
+{
+	struct stm32_adc_common *common = platform_get_drvdata(pdev);
+	struct stm32_adc_priv *priv = to_stm32_adc_priv(common);
+
+	of_platform_depopulate(&pdev->dev);
+	stm32_adc_irq_remove(pdev, priv);
+	clk_disable_unprepare(priv->aclk);
+	regulator_disable(priv->vref);
+
+	return 0;
+}
+
+static const struct of_device_id stm32_adc_of_match[] = {
+	{ .compatible = "st,stm32f4-adc-core" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, stm32_adc_of_match);
+
+static struct platform_driver stm32_adc_driver = {
+	.probe = stm32_adc_probe,
+	.remove = stm32_adc_remove,
+	.driver = {
+		.name = "stm32-adc-core",
+		.of_match_table = stm32_adc_of_match,
+	},
+};
+module_platform_driver(stm32_adc_driver);
+
+MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32 ADC core driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:stm32-adc-core");

drivers/iio/adc/stm32-adc-core.h

+/*
+ * This file is part of STM32 ADC driver
+ *
+ * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
+ * Author: Fabrice Gasnier <fabrice.gasnier@st.com>.
+ *
+ * License type: GPLv2
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __STM32_ADC_H
+#define __STM32_ADC_H
+
+/*
+ * STM32 - ADC global register map
+ * ________________________________________________________
+ * | Offset |                 Register                    |
+ * --------------------------------------------------------
+ * | 0x000  |                Master ADC1                  |
+ * --------------------------------------------------------
+ * | 0x100  |                Slave ADC2                   |
+ * --------------------------------------------------------
+ * | 0x200  |                Slave ADC3                   |
+ * --------------------------------------------------------
+ * | 0x300  |         Master & Slave common regs          |
+ * --------------------------------------------------------
+ */
+#define STM32_ADC_MAX_ADCS		3
+#define STM32_ADCX_COMN_OFFSET		0x300
+
+/**
+ * struct stm32_adc_common - stm32 ADC driver common data (for all instances)
+ * @base:		control registers base cpu addr
+ * @vref_mv:		vref voltage (mv)
+ */
+struct stm32_adc_common {
+	void __iomem			*base;
+	int				vref_mv;
+};
+
+#endif

drivers/iio/light/tsl2583.c

@@ -565,7 +565,7 @@ static ssize_t in_illuminance_lux_table_store(struct device *dev,
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct tsl2583_chip *chip = iio_priv(indio_dev);
 	const unsigned int max_ints = TSL2583_MAX_LUX_TABLE_ENTRIES * 3;
-	int value[TSL2583_MAX_LUX_TABLE_ENTRIES * 3];
+	int value[TSL2583_MAX_LUX_TABLE_ENTRIES * 3 + 1];
 	int ret = -EINVAL;
 	unsigned int n;
 

drivers/iio/magnetometer/hid-sensor-magn-3d.c

@@ -42,9 +42,17 @@ enum magn_3d_channel {
 	MAGN_3D_CHANNEL_MAX,
 };
 
+struct common_attributes {
+	int scale_pre_decml;
+	int scale_post_decml;
+	int scale_precision;
+	int value_offset;
+};
+
 struct magn_3d_state {
 	struct hid_sensor_hub_callbacks callbacks;
-	struct hid_sensor_common common_attributes;
+	struct hid_sensor_common magn_flux_attributes;
+	struct hid_sensor_common rot_attributes;
 	struct hid_sensor_hub_attribute_info magn[MAGN_3D_CHANNEL_MAX];
 
 	/* dynamically sized array to hold sensor values */
@@ -52,10 +60,8 @@ struct magn_3d_state {
 	/* array of pointers to sensor value */
 	u32 *magn_val_addr[MAGN_3D_CHANNEL_MAX];
 
-	int scale_pre_decml;
-	int scale_post_decml;
-	int scale_precision;
-	int value_offset;
+	struct common_attributes magn_flux_attr;
+	struct common_attributes rot_attr;
 };
 
 static const u32 magn_3d_addresses[MAGN_3D_CHANNEL_MAX] = {
@@ -162,41 +168,74 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev,
 	*val2 = 0;
 	switch (mask) {
 	case 0:
-		hid_sensor_power_state(&magn_state->common_attributes, true);
+		hid_sensor_power_state(&magn_state->magn_flux_attributes, true);
 		report_id =
 			magn_state->magn[chan->address].report_id;
 		address = magn_3d_addresses[chan->address];
 		if (report_id >= 0)
 			*val = sensor_hub_input_attr_get_raw_value(
-				magn_state->common_attributes.hsdev,
+				magn_state->magn_flux_attributes.hsdev,
 				HID_USAGE_SENSOR_COMPASS_3D, address,
 				report_id,
 				SENSOR_HUB_SYNC);
 		else {
 			*val = 0;
-			hid_sensor_power_state(&magn_state->common_attributes,
-						false);
+			hid_sensor_power_state(
+				&magn_state->magn_flux_attributes,
+				false);
 			return -EINVAL;
 		}
-		hid_sensor_power_state(&magn_state->common_attributes, false);
+		hid_sensor_power_state(&magn_state->magn_flux_attributes,
+					false);
 		ret_type = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SCALE:
-		*val = magn_state->scale_pre_decml;
-		*val2 = magn_state->scale_post_decml;
-		ret_type = magn_state->scale_precision;
+		switch (chan->type) {
+		case IIO_MAGN:
+			*val = magn_state->magn_flux_attr.scale_pre_decml;
+			*val2 = magn_state->magn_flux_attr.scale_post_decml;
+			ret_type = magn_state->magn_flux_attr.scale_precision;
+			break;
+		case IIO_ROT:
+			*val = magn_state->rot_attr.scale_pre_decml;
+			*val2 = magn_state->rot_attr.scale_post_decml;
+			ret_type = magn_state->rot_attr.scale_precision;
+			break;
+		default:
+			ret_type = -EINVAL;
+		}
 		break;
 	case IIO_CHAN_INFO_OFFSET:
-		*val = magn_state->value_offset;
-		ret_type = IIO_VAL_INT;
+		switch (chan->type) {
+		case IIO_MAGN:
+			*val = magn_state->magn_flux_attr.value_offset;
+			ret_type = IIO_VAL_INT;
+			break;
+		case IIO_ROT:
+			*val = magn_state->rot_attr.value_offset;
+			ret_type = IIO_VAL_INT;
+			break;
+		default:
+			ret_type = -EINVAL;
+		}
 		break;
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		ret_type = hid_sensor_read_samp_freq_value(
-			&magn_state->common_attributes, val, val2);
+			&magn_state->magn_flux_attributes, val, val2);
 		break;
 	case IIO_CHAN_INFO_HYSTERESIS:
-		ret_type = hid_sensor_read_raw_hyst_value(
-			&magn_state->common_attributes, val, val2);
+		switch (chan->type) {
+		case IIO_MAGN:
+			ret_type = hid_sensor_read_raw_hyst_value(
+				&magn_state->magn_flux_attributes, val, val2);
+			break;
+		case IIO_ROT:
+			ret_type = hid_sensor_read_raw_hyst_value(
+				&magn_state->rot_attributes, val, val2);
+			break;
+		default:
+			ret_type = -EINVAL;
+		}
 		break;
 	default:
 		ret_type = -EINVAL;
@@ -219,11 +258,21 @@ static int magn_3d_write_raw(struct iio_dev *indio_dev,
 	switch (mask) {
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		ret = hid_sensor_write_samp_freq_value(
-				&magn_state->common_attributes, val, val2);
+				&magn_state->magn_flux_attributes, val, val2);
 		break;
 	case IIO_CHAN_INFO_HYSTERESIS:
-		ret = hid_sensor_write_raw_hyst_value(
-				&magn_state->common_attributes, val, val2);
+		switch (chan->type) {
+		case IIO_MAGN:
+			ret = hid_sensor_write_raw_hyst_value(
+				&magn_state->magn_flux_attributes, val, val2);
+			break;
+		case IIO_ROT:
+			ret = hid_sensor_write_raw_hyst_value(
+				&magn_state->rot_attributes, val, val2);
+			break;
+		default:
+			ret = -EINVAL;
+		}
 		break;
 	default:
 		ret = -EINVAL;
@@ -254,7 +303,7 @@ static int magn_3d_proc_event(struct hid_sensor_hub_device *hsdev,
 	struct magn_3d_state *magn_state = iio_priv(indio_dev);
 
 	dev_dbg(&indio_dev->dev, "magn_3d_proc_event\n");
-	if (atomic_read(&magn_state->common_attributes.data_ready))
+	if (atomic_read(&magn_state->magn_flux_attributes.data_ready))
 		hid_sensor_push_data(indio_dev, magn_state->iio_vals);
 
 	return 0;
@@ -389,21 +438,48 @@ static int magn_3d_parse_report(struct platform_device *pdev,
 	dev_dbg(&pdev->dev, "magn_3d Setup %d IIO channels\n",
 			*chan_count);
 
-	st->scale_precision = hid_sensor_format_scale(
+	st->magn_flux_attr.scale_precision = hid_sensor_format_scale(
 				HID_USAGE_SENSOR_COMPASS_3D,
 				&st->magn[CHANNEL_SCAN_INDEX_X],
-				&st->scale_pre_decml, &st->scale_post_decml);
+				&st->magn_flux_attr.scale_pre_decml,
+				&st->magn_flux_attr.scale_post_decml);
+	st->rot_attr.scale_precision
+		= hid_sensor_format_scale(
+			HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH,
+			&st->magn[CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP],
+			&st->rot_attr.scale_pre_decml,
+			&st->rot_attr.scale_post_decml);
 
 	/* Set Sensitivity field ids, when there is no individual modifier */
-	if (st->common_attributes.sensitivity.index < 0) {
+	if (st->magn_flux_attributes.sensitivity.index < 0) {
 		sensor_hub_input_get_attribute_info(hsdev,
 			HID_FEATURE_REPORT, usage_id,
 			HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
 			HID_USAGE_SENSOR_DATA_ORIENTATION,
-			&st->common_attributes.sensitivity);
+			&st->magn_flux_attributes.sensitivity);
+		dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
+			st->magn_flux_attributes.sensitivity.index,
+			st->magn_flux_attributes.sensitivity.report_id);
+	}
+	if (st->magn_flux_attributes.sensitivity.index < 0) {
+		sensor_hub_input_get_attribute_info(hsdev,
+			HID_FEATURE_REPORT, usage_id,
+			HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
+			HID_USAGE_SENSOR_ORIENT_MAGN_FLUX,
+			&st->magn_flux_attributes.sensitivity);
+		dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
+			st->magn_flux_attributes.sensitivity.index,
+			st->magn_flux_attributes.sensitivity.report_id);
+	}
+	if (st->rot_attributes.sensitivity.index < 0) {
+		sensor_hub_input_get_attribute_info(hsdev,
+			HID_FEATURE_REPORT, usage_id,
+			HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
+			HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH,
+			&st->rot_attributes.sensitivity);
 		dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
-			st->common_attributes.sensitivity.index,
-			st->common_attributes.sensitivity.report_id);
+			st->rot_attributes.sensitivity.index,
+			st->rot_attributes.sensitivity.report_id);
 	}
 
 	return 0;
@@ -428,16 +504,17 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, indio_dev);
 
 	magn_state = iio_priv(indio_dev);
-	magn_state->common_attributes.hsdev = hsdev;
-	magn_state->common_attributes.pdev = pdev;
+	magn_state->magn_flux_attributes.hsdev = hsdev;
+	magn_state->magn_flux_attributes.pdev = pdev;
 
 	ret = hid_sensor_parse_common_attributes(hsdev,
 				HID_USAGE_SENSOR_COMPASS_3D,
-				&magn_state->common_attributes);
+				&magn_state->magn_flux_attributes);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to setup common attributes\n");
 		return ret;
 	}
+	magn_state->rot_attributes = magn_state->magn_flux_attributes;
 
 	ret = magn_3d_parse_report(pdev, hsdev,
 				&channels, &chan_count,
@@ -460,9 +537,9 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
 		return ret;
 	}
-	atomic_set(&magn_state->common_attributes.data_ready, 0);
+	atomic_set(&magn_state->magn_flux_attributes.data_ready, 0);
 	ret = hid_sensor_setup_trigger(indio_dev, name,
-					&magn_state->common_attributes);
+					&magn_state->magn_flux_attributes);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "trigger setup failed\n");
 		goto error_unreg_buffer_funcs;
@@ -489,7 +566,7 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
 error_iio_unreg:
 	iio_device_unregister(indio_dev);
 error_remove_trigger:
-	hid_sensor_remove_trigger(&magn_state->common_attributes);
+	hid_sensor_remove_trigger(&magn_state->magn_flux_attributes);
 error_unreg_buffer_funcs:
 	iio_triggered_buffer_cleanup(indio_dev);
 	return ret;
@@ -504,7 +581,7 @@ static int hid_magn_3d_remove(struct platform_device *pdev)
 
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D);
 	iio_device_unregister(indio_dev);
-	hid_sensor_remove_trigger(&magn_state->common_attributes);
+	hid_sensor_remove_trigger(&magn_state->magn_flux_attributes);
 	iio_triggered_buffer_cleanup(indio_dev);
 
 	return 0;