net: qed: Disable aRFS for NPAR and 100G

In CMT and NPAR the PF is unknown when the GFS block processes the
packet. Therefore cannot use searcher as it has a per PF database,
and thus ARFS must be disabled.

Fixes: d51e4af5 ("qed: aRFS infrastructure support")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qed/qed_dev.c

@@ -4253,7 +4253,8 @@ static int qed_hw_get_nvm_info(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
 			cdev->mf_bits = BIT(QED_MF_LLH_MAC_CLSS) |
 					BIT(QED_MF_LLH_PROTO_CLSS) |
 					BIT(QED_MF_LL2_NON_UNICAST) |
-					BIT(QED_MF_INTER_PF_SWITCH);
+					BIT(QED_MF_INTER_PF_SWITCH) |
+					BIT(QED_MF_DISABLE_ARFS);
 			break;
 		case NVM_CFG1_GLOB_MF_MODE_DEFAULT:
 			cdev->mf_bits = BIT(QED_MF_LLH_MAC_CLSS) |
@@ -4266,6 +4267,14 @@ static int qed_hw_get_nvm_info(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
 
 		DP_INFO(p_hwfn, "Multi function mode is 0x%lx\n",
 			cdev->mf_bits);
+
+		/* In CMT the PF is unknown when the GFS block processes the
+		 * packet. Therefore cannot use searcher as it has a per PF
+		 * database, and thus ARFS must be disabled.
+		 *
+		 */
+		if (QED_IS_CMT(cdev))
+			cdev->mf_bits |= BIT(QED_MF_DISABLE_ARFS);
 	}
 
 	DP_INFO(p_hwfn, "Multi function mode is 0x%lx\n",

drivers/net/ethernet/qlogic/qed/qed_l2.c

@@ -1980,6 +1980,9 @@ void qed_arfs_mode_configure(struct qed_hwfn *p_hwfn,
 			     struct qed_ptt *p_ptt,
 			     struct qed_arfs_config_params *p_cfg_params)
 {
+	if (test_bit(QED_MF_DISABLE_ARFS, &p_hwfn->cdev->mf_bits))
+		return;
+
 	if (p_cfg_params->mode != QED_FILTER_CONFIG_MODE_DISABLE) {
 		qed_gft_config(p_hwfn, p_ptt, p_hwfn->rel_pf_id,
 			       p_cfg_params->tcp,

drivers/net/ethernet/qlogic/qed/qed_main.c

@@ -444,6 +444,8 @@ int qed_fill_dev_info(struct qed_dev *cdev,
 		dev_info->fw_eng = FW_ENGINEERING_VERSION;
 		dev_info->b_inter_pf_switch = test_bit(QED_MF_INTER_PF_SWITCH,
 						       &cdev->mf_bits);
+		if (!test_bit(QED_MF_DISABLE_ARFS, &cdev->mf_bits))
+			dev_info->b_arfs_capable = true;
 		dev_info->tx_switching = true;
 
 		if (hw_info->b_wol_support == QED_WOL_SUPPORT_PME)

include/linux/qed/qed_if.h

@@ -623,6 +623,7 @@ struct qed_dev_info {
 #define QED_MFW_VERSION_3_OFFSET	24
 
 	u32		flash_size;
+	bool		b_arfs_capable;
 	bool		b_inter_pf_switch;
 	bool		tx_switching;
 	bool		rdma_supported;