Commit 2d31ecaf authored by Matt Carlson's avatar Matt Carlson Committed by David S. Miller

tg3: Create tg3_rings_reset()

This patch moves most of the chip ring setup logic into a separate
function.  This will make it easier to verify the multi ring setup
changes.
Signed-off-by: default avatarMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: default avatarBenjamin Li <benli@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent fd2ce37f
...@@ -6817,6 +6817,76 @@ static void __tg3_set_coalesce(struct tg3 *tp, struct ethtool_coalesce *ec) ...@@ -6817,6 +6817,76 @@ static void __tg3_set_coalesce(struct tg3 *tp, struct ethtool_coalesce *ec)
} }
} }
/* tp->lock is held. */
static void tg3_rings_reset(struct tg3 *tp)
{
int i;
u32 txrcb, rxrcb, limit;
struct tg3_napi *tnapi = &tp->napi[0];
/* Disable all transmit rings but the first. */
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE * 16;
else
limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE;
for (txrcb = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE;
txrcb < limit; txrcb += TG3_BDINFO_SIZE)
tg3_write_mem(tp, txrcb + TG3_BDINFO_MAXLEN_FLAGS,
BDINFO_FLAGS_DISABLED);
/* Disable all receive return rings but the first. */
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 16;
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755)
limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 4;
else
limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE;
for (rxrcb = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE;
rxrcb < limit; rxrcb += TG3_BDINFO_SIZE)
tg3_write_mem(tp, rxrcb + TG3_BDINFO_MAXLEN_FLAGS,
BDINFO_FLAGS_DISABLED);
/* Disable interrupts */
tw32_mailbox_f(tp->napi[0].int_mbox, 1);
/* Zero mailbox registers. */
tp->napi[0].tx_prod = 0;
tp->napi[0].tx_cons = 0;
tw32_mailbox(tp->napi[0].prodmbox, 0);
tw32_rx_mbox(tp->napi[0].consmbox, 0);
/* Make sure the NIC-based send BD rings are disabled. */
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
u32 mbox = MAILBOX_SNDNIC_PROD_IDX_0 + TG3_64BIT_REG_LOW;
for (i = 0; i < 16; i++)
tw32_tx_mbox(mbox + i * 8, 0);
}
txrcb = NIC_SRAM_SEND_RCB;
rxrcb = NIC_SRAM_RCV_RET_RCB;
/* Clear status block in ram. */
memset(tnapi->hw_status, 0, TG3_HW_STATUS_SIZE);
/* Set status block DMA address */
tw32(HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_HIGH,
((u64) tnapi->status_mapping >> 32));
tw32(HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_LOW,
((u64) tnapi->status_mapping & 0xffffffff));
tg3_set_bdinfo(tp, txrcb, tnapi->tx_desc_mapping,
(TG3_TX_RING_SIZE <<
BDINFO_FLAGS_MAXLEN_SHIFT),
NIC_SRAM_TX_BUFFER_DESC);
tg3_set_bdinfo(tp, rxrcb, tnapi->rx_rcb_mapping,
(TG3_RX_RCB_RING_SIZE(tp) <<
BDINFO_FLAGS_MAXLEN_SHIFT), 0);
}
/* tp->lock is held. */ /* tp->lock is held. */
static int tg3_reset_hw(struct tg3 *tp, int reset_phy) static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
{ {
...@@ -7091,48 +7161,6 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) ...@@ -7091,48 +7161,6 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
tw32(RCVDBDI_STD_BD + TG3_BDINFO_MAXLEN_FLAGS, val); tw32(RCVDBDI_STD_BD + TG3_BDINFO_MAXLEN_FLAGS, val);
/* There is only one send ring on 5705/5750, no need to explicitly
* disable the others.
*/
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
/* Clear out send RCB ring in SRAM. */
for (i = NIC_SRAM_SEND_RCB; i < NIC_SRAM_RCV_RET_RCB; i += TG3_BDINFO_SIZE)
tg3_write_mem(tp, i + TG3_BDINFO_MAXLEN_FLAGS,
BDINFO_FLAGS_DISABLED);
}
tp->napi[0].tx_prod = 0;
tp->napi[0].tx_cons = 0;
tw32_tx_mbox(MAILBOX_SNDNIC_PROD_IDX_0 + TG3_64BIT_REG_LOW, 0);
val = MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW;
tw32_mailbox(val, 0);
tg3_set_bdinfo(tp, NIC_SRAM_SEND_RCB,
tp->napi[0].tx_desc_mapping,
(TG3_TX_RING_SIZE <<
BDINFO_FLAGS_MAXLEN_SHIFT),
NIC_SRAM_TX_BUFFER_DESC);
/* There is only one receive return ring on 5705/5750, no need
* to explicitly disable the others.
*/
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
for (i = NIC_SRAM_RCV_RET_RCB; i < NIC_SRAM_STATS_BLK;
i += TG3_BDINFO_SIZE) {
tg3_write_mem(tp, i + TG3_BDINFO_MAXLEN_FLAGS,
BDINFO_FLAGS_DISABLED);
}
}
tw32_rx_mbox(tp->napi[0].consmbox, 0);
tg3_set_bdinfo(tp, NIC_SRAM_RCV_RET_RCB,
tp->napi[0].rx_rcb_mapping,
(TG3_RX_RCB_RING_SIZE(tp) <<
BDINFO_FLAGS_MAXLEN_SHIFT),
0);
tpr->rx_std_ptr = tp->rx_pending; tpr->rx_std_ptr = tp->rx_pending;
tw32_rx_mbox(MAILBOX_RCV_STD_PROD_IDX + TG3_64BIT_REG_LOW, tw32_rx_mbox(MAILBOX_RCV_STD_PROD_IDX + TG3_64BIT_REG_LOW,
tpr->rx_std_ptr); tpr->rx_std_ptr);
...@@ -7142,6 +7170,8 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) ...@@ -7142,6 +7170,8 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
tw32_rx_mbox(MAILBOX_RCV_JUMBO_PROD_IDX + TG3_64BIT_REG_LOW, tw32_rx_mbox(MAILBOX_RCV_JUMBO_PROD_IDX + TG3_64BIT_REG_LOW,
tpr->rx_jmb_ptr); tpr->rx_jmb_ptr);
tg3_rings_reset(tp);
/* Initialize MAC address and backoff seed. */ /* Initialize MAC address and backoff seed. */
__tg3_set_mac_addr(tp, 0); __tg3_set_mac_addr(tp, 0);
...@@ -7229,12 +7259,6 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) ...@@ -7229,12 +7259,6 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
__tg3_set_coalesce(tp, &tp->coal); __tg3_set_coalesce(tp, &tp->coal);
/* set status block DMA address */
tw32(HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_HIGH,
((u64) tp->napi[0].status_mapping >> 32));
tw32(HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_LOW,
((u64) tp->napi[0].status_mapping & 0xffffffff));
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) { if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
/* Status/statistics block address. See tg3_timer, /* Status/statistics block address. See tg3_timer,
* the tg3_periodic_fetch_stats call there, and * the tg3_periodic_fetch_stats call there, and
...@@ -7245,7 +7269,16 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) ...@@ -7245,7 +7269,16 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
tw32(HOSTCC_STATS_BLK_HOST_ADDR + TG3_64BIT_REG_LOW, tw32(HOSTCC_STATS_BLK_HOST_ADDR + TG3_64BIT_REG_LOW,
((u64) tp->stats_mapping & 0xffffffff)); ((u64) tp->stats_mapping & 0xffffffff));
tw32(HOSTCC_STATS_BLK_NIC_ADDR, NIC_SRAM_STATS_BLK); tw32(HOSTCC_STATS_BLK_NIC_ADDR, NIC_SRAM_STATS_BLK);
tw32(HOSTCC_STATUS_BLK_NIC_ADDR, NIC_SRAM_STATUS_BLK); tw32(HOSTCC_STATUS_BLK_NIC_ADDR, NIC_SRAM_STATUS_BLK);
/* Clear statistics and status block memory areas */
for (i = NIC_SRAM_STATS_BLK;
i < NIC_SRAM_STATUS_BLK + TG3_HW_STATUS_SIZE;
i += sizeof(u32)) {
tg3_write_mem(tp, i, 0);
udelay(40);
}
} }
tw32(HOSTCC_MODE, HOSTCC_MODE_ENABLE | tp->coalesce_mode); tw32(HOSTCC_MODE, HOSTCC_MODE_ENABLE | tp->coalesce_mode);
...@@ -7255,15 +7288,6 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) ...@@ -7255,15 +7288,6 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
tw32(RCVLSC_MODE, RCVLSC_MODE_ENABLE | RCVLSC_MODE_ATTN_ENABLE); tw32(RCVLSC_MODE, RCVLSC_MODE_ENABLE | RCVLSC_MODE_ATTN_ENABLE);
/* Clear statistics/status block in chip, and status block in ram. */
for (i = NIC_SRAM_STATS_BLK;
i < NIC_SRAM_STATUS_BLK + TG3_HW_STATUS_SIZE;
i += sizeof(u32)) {
tg3_write_mem(tp, i, 0);
udelay(40);
}
memset(tp->napi[0].hw_status, 0, TG3_HW_STATUS_SIZE);
if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) { if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) {
tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT; tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT;
/* reset to prevent losing 1st rx packet intermittently */ /* reset to prevent losing 1st rx packet intermittently */
...@@ -7315,8 +7339,6 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) ...@@ -7315,8 +7339,6 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl); tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
udelay(100); udelay(100);
tw32_mailbox_f(tp->napi[0].int_mbox, 0);
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) { if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
tw32_f(DMAC_MODE, DMAC_MODE_ENABLE); tw32_f(DMAC_MODE, DMAC_MODE_ENABLE);
udelay(40); udelay(40);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment