powerpc/powernv: Remove support for p5ioc2

"p5ioc2 is used by approximately 2 machines in the world, and has never
ever been a supported configuration."

The code for p5ioc2 is essentially unused and complicates what is already
a very complicated codebase.  Its removal is essentially a "free win" in
the effort to simplify the powernv PCI code.

In addition, support for p5ioc2 has been dropped from skiboot.  There's no
reason to keep it around in the kernel.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

arch/powerpc/platforms/powernv/Makefile

@@ -5,7 +5,7 @@ obj-y			+= opal-msglog.o opal-hmi.o opal-power.o opal-irqchip.o
 obj-y			+= opal-kmsg.o
 
 obj-$(CONFIG_SMP)	+= smp.o subcore.o subcore-asm.o
-obj-$(CONFIG_PCI)	+= pci.o pci-p5ioc2.o pci-ioda.o npu-dma.o
+obj-$(CONFIG_PCI)	+= pci.o pci-ioda.o npu-dma.o
 obj-$(CONFIG_EEH)	+= eeh-powernv.o
 obj-$(CONFIG_PPC_SCOM)	+= opal-xscom.o
 obj-$(CONFIG_MEMORY_FAILURE)	+= opal-memory-errors.o

arch/powerpc/platforms/powernv/pci-p5ioc2.c

-/*
- * Support PCI/PCIe on PowerNV platforms
- *
- * Currently supports only P5IOC2
- *
- * Copyright 2011 Benjamin Herrenschmidt, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/msi.h>
-
-#include <asm/sections.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/msi_bitmap.h>
-#include <asm/ppc-pci.h>
-#include <asm/opal.h>
-#include <asm/iommu.h>
-#include <asm/tce.h>
-
-#include "powernv.h"
-#include "pci.h"
-
-/* For now, use a fixed amount of TCE memory for each p5ioc2
- * hub, 16M will do
- */
-#define P5IOC2_TCE_MEMORY	0x01000000
-
-#ifdef CONFIG_PCI_MSI
-static int pnv_pci_p5ioc2_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
-				    unsigned int hwirq, unsigned int virq,
-				    unsigned int is_64, struct msi_msg *msg)
-{
-	if (WARN_ON(!is_64))
-		return -ENXIO;
-	msg->data = hwirq - phb->msi_base;
-	msg->address_hi = 0x10000000;
-	msg->address_lo = 0;
-
-	return 0;
-}
-
-static void pnv_pci_init_p5ioc2_msis(struct pnv_phb *phb)
-{
-	unsigned int count;
-	const __be32 *prop = of_get_property(phb->hose->dn,
-					     "ibm,opal-msi-ranges", NULL);
-	if (!prop)
-		return;
-
-	/* Don't do MSI's on p5ioc2 PCI-X are they are not properly
-	 * verified in HW
-	 */
-	if (of_device_is_compatible(phb->hose->dn, "ibm,p5ioc2-pcix"))
-		return;
-	phb->msi_base = be32_to_cpup(prop);
-	count = be32_to_cpup(prop + 1);
-	if (msi_bitmap_alloc(&phb->msi_bmp, count, phb->hose->dn)) {
-		pr_err("PCI %d: Failed to allocate MSI bitmap !\n",
-		       phb->hose->global_number);
-		return;
-	}
-	phb->msi_setup = pnv_pci_p5ioc2_msi_setup;
-	phb->msi32_support = 0;
-	pr_info(" Allocated bitmap for %d MSIs (base IRQ 0x%x)\n",
-		count, phb->msi_base);
-}
-#else
-static void pnv_pci_init_p5ioc2_msis(struct pnv_phb *phb) { }
-#endif /* CONFIG_PCI_MSI */
-
-static struct iommu_table_ops pnv_p5ioc2_iommu_ops = {
-	.set = pnv_tce_build,
-#ifdef CONFIG_IOMMU_API
-	.exchange = pnv_tce_xchg,
-#endif
-	.clear = pnv_tce_free,
-	.get = pnv_tce_get,
-};
-
-static void pnv_pci_p5ioc2_dma_dev_setup(struct pnv_phb *phb,
-					 struct pci_dev *pdev)
-{
-	struct iommu_table *tbl = phb->p5ioc2.table_group.tables[0];
-
-	if (!tbl->it_map) {
-		tbl->it_ops = &pnv_p5ioc2_iommu_ops;
-		iommu_init_table(tbl, phb->hose->node);
-		iommu_register_group(&phb->p5ioc2.table_group,
-				pci_domain_nr(phb->hose->bus), phb->opal_id);
-		INIT_LIST_HEAD_RCU(&tbl->it_group_list);
-		pnv_pci_link_table_and_group(phb->hose->node, 0,
-				tbl, &phb->p5ioc2.table_group);
-	}
-
-	set_iommu_table_base(&pdev->dev, tbl);
-	iommu_add_device(&pdev->dev);
-}
-
-static const struct pci_controller_ops pnv_pci_p5ioc2_controller_ops = {
-	.dma_dev_setup = pnv_pci_dma_dev_setup,
-#ifdef CONFIG_PCI_MSI
-       .setup_msi_irqs = pnv_setup_msi_irqs,
-       .teardown_msi_irqs = pnv_teardown_msi_irqs,
-#endif
-};
-
-static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np, u64 hub_id,
-					   void *tce_mem, u64 tce_size)
-{
-	struct pnv_phb *phb;
-	const __be64 *prop64;
-	u64 phb_id;
-	int64_t rc;
-	static int primary = 1;
-	struct iommu_table_group *table_group;
-	struct iommu_table *tbl;
-
-	pr_info(" Initializing p5ioc2 PHB %s\n", np->full_name);
-
-	prop64 = of_get_property(np, "ibm,opal-phbid", NULL);
-	if (!prop64) {
-		pr_err("  Missing \"ibm,opal-phbid\" property !\n");
-		return;
-	}
-	phb_id = be64_to_cpup(prop64);
-	pr_devel("  PHB-ID  : 0x%016llx\n", phb_id);
-	pr_devel("  TCE AT  : 0x%016lx\n", __pa(tce_mem));
-	pr_devel("  TCE SZ  : 0x%016llx\n", tce_size);
-
-	rc = opal_pci_set_phb_tce_memory(phb_id, __pa(tce_mem), tce_size);
-	if (rc != OPAL_SUCCESS) {
-		pr_err("  Failed to set TCE memory, OPAL error %lld\n", rc);
-		return;
-	}
-
-	phb = memblock_virt_alloc(sizeof(struct pnv_phb), 0);
-	phb->hose = pcibios_alloc_controller(np);
-	if (!phb->hose) {
-		pr_err("  Failed to allocate PCI controller\n");
-		return;
-	}
-
-	spin_lock_init(&phb->lock);
-	phb->hose->first_busno = 0;
-	phb->hose->last_busno = 0xff;
-	phb->hose->private_data = phb;
-	phb->hose->controller_ops = pnv_pci_p5ioc2_controller_ops;
-	phb->hub_id = hub_id;
-	phb->opal_id = phb_id;
-	phb->type = PNV_PHB_P5IOC2;
-	phb->model = PNV_PHB_MODEL_P5IOC2;
-
-	phb->regs = of_iomap(np, 0);
-
-	if (phb->regs == NULL)
-		pr_err("  Failed to map registers !\n");
-	else {
-		pr_devel("  P_BUID     = 0x%08x\n", in_be32(phb->regs + 0x100));
-		pr_devel("  P_IOSZ     = 0x%08x\n", in_be32(phb->regs + 0x1b0));
-		pr_devel("  P_IO_ST    = 0x%08x\n", in_be32(phb->regs + 0x1e0));
-		pr_devel("  P_MEM1_H   = 0x%08x\n", in_be32(phb->regs + 0x1a0));
-		pr_devel("  P_MEM1_L   = 0x%08x\n", in_be32(phb->regs + 0x190));
-		pr_devel("  P_MSZ1_L   = 0x%08x\n", in_be32(phb->regs + 0x1c0));
-		pr_devel("  P_MEM_ST   = 0x%08x\n", in_be32(phb->regs + 0x1d0));
-		pr_devel("  P_MEM2_H   = 0x%08x\n", in_be32(phb->regs + 0x2c0));
-		pr_devel("  P_MEM2_L   = 0x%08x\n", in_be32(phb->regs + 0x2b0));
-		pr_devel("  P_MSZ2_H   = 0x%08x\n", in_be32(phb->regs + 0x2d0));
-		pr_devel("  P_MSZ2_L   = 0x%08x\n", in_be32(phb->regs + 0x2e0));
-	}
-
-	/* Interpret the "ranges" property */
-	/* This also maps the I/O region and sets isa_io/mem_base */
-	pci_process_bridge_OF_ranges(phb->hose, np, primary);
-	primary = 0;
-
-	phb->hose->ops = &pnv_pci_ops;
-
-	/* Setup MSI support */
-	pnv_pci_init_p5ioc2_msis(phb);
-
-	/* Setup TCEs */
-	phb->dma_dev_setup = pnv_pci_p5ioc2_dma_dev_setup;
-	pnv_pci_setup_iommu_table(&phb->p5ioc2.iommu_table,
-				  tce_mem, tce_size, 0,
-				  IOMMU_PAGE_SHIFT_4K);
-	/*
-	 * We do not allocate iommu_table as we do not support
-	 * hotplug or SRIOV on P5IOC2 and therefore iommu_free_table()
-	 * should not be called for phb->p5ioc2.table_group.tables[0] ever.
-	 */
-	tbl = phb->p5ioc2.table_group.tables[0] = &phb->p5ioc2.iommu_table;
-	table_group = &phb->p5ioc2.table_group;
-	table_group->tce32_start = tbl->it_offset << tbl->it_page_shift;
-	table_group->tce32_size = tbl->it_size << tbl->it_page_shift;
-}
-
-void __init pnv_pci_init_p5ioc2_hub(struct device_node *np)
-{
-	struct device_node *phbn;
-	const __be64 *prop64;
-	u64 hub_id;
-	void *tce_mem;
-	uint64_t tce_per_phb;
-	int64_t rc;
-	int phb_count = 0;
-
-	pr_info("Probing p5ioc2 IO-Hub %s\n", np->full_name);
-
-	prop64 = of_get_property(np, "ibm,opal-hubid", NULL);
-	if (!prop64) {
-		pr_err(" Missing \"ibm,opal-hubid\" property !\n");
-		return;
-	}
-	hub_id = be64_to_cpup(prop64);
-	pr_info(" HUB-ID : 0x%016llx\n", hub_id);
-
-	/* Count child PHBs and calculate TCE space per PHB */
-	for_each_child_of_node(np, phbn) {
-		if (of_device_is_compatible(phbn, "ibm,p5ioc2-pcix") ||
-		    of_device_is_compatible(phbn, "ibm,p5ioc2-pciex"))
-			phb_count++;
-	}
-
-	if (phb_count <= 0) {
-		pr_info(" No PHBs for Hub %s\n", np->full_name);
-		return;
-	}
-
-	tce_per_phb = __rounddown_pow_of_two(P5IOC2_TCE_MEMORY / phb_count);
-	pr_info(" Allocating %lld MB of TCE memory per PHB\n",
-		tce_per_phb >> 20);
-
-	/* Currently allocate 16M of TCE memory for every Hub
-	 *
-	 * XXX TODO: Make it chip local if possible
-	 */
-	tce_mem = memblock_virt_alloc(P5IOC2_TCE_MEMORY, P5IOC2_TCE_MEMORY);
-	pr_debug(" TCE    : 0x%016lx..0x%016lx\n",
-		__pa(tce_mem), __pa(tce_mem) + P5IOC2_TCE_MEMORY - 1);
-	rc = opal_pci_set_hub_tce_memory(hub_id, __pa(tce_mem),
-					P5IOC2_TCE_MEMORY);
-	if (rc != OPAL_SUCCESS) {
-		pr_err(" Failed to allocate TCE memory, OPAL error %lld\n", rc);
-		return;
-	}
-
-	/* Initialize PHBs */
-	for_each_child_of_node(np, phbn) {
-		if (of_device_is_compatible(phbn, "ibm,p5ioc2-pcix") ||
-		    of_device_is_compatible(phbn, "ibm,p5ioc2-pciex")) {
-			pnv_pci_init_p5ioc2_phb(phbn, hub_id,
-					tce_mem, tce_per_phb);
-			tce_mem += tce_per_phb;
-		}
-	}
-}

arch/powerpc/platforms/powernv/pci.c

@@ -380,9 +380,6 @@ static void pnv_pci_config_check_eeh(struct pci_dn *pdn)
 	 */
 	pe_no = pdn->pe_number;
 	if (pe_no == IODA_INVALID_PE) {
-		if (phb->type == PNV_PHB_P5IOC2)
-			pe_no = 0;
-		else
 		pe_no = phb->ioda.reserved_pe;
 	}
 
@@ -779,7 +776,6 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IBM, 0x3b9, pnv_p7ioc_rc_quirk);
 void __init pnv_pci_init(void)
 {
 	struct device_node *np;
-	bool found_ioda = false;
 
 	pci_add_flags(PCI_CAN_SKIP_ISA_ALIGN);
 
@@ -787,20 +783,11 @@ void __init pnv_pci_init(void)
 	if (!firmware_has_feature(FW_FEATURE_OPAL))
 		return;
 
-	/* Look for IODA IO-Hubs. We don't support mixing IODA
-	 * and p5ioc2 due to the need to change some global
-	 * probing flags
-	 */
+	/* Look for IODA IO-Hubs. */
 	for_each_compatible_node(np, NULL, "ibm,ioda-hub") {
 		pnv_pci_init_ioda_hub(np);
-		found_ioda = true;
 	}
 
-	/* Look for p5ioc2 IO-Hubs */
-	if (!found_ioda)
-		for_each_compatible_node(np, NULL, "ibm,p5ioc2")
-			pnv_pci_init_p5ioc2_hub(np);
-
 	/* Look for ioda2 built-in PHB3's */
 	for_each_compatible_node(np, NULL, "ibm,ioda2-phb")
 		pnv_pci_init_ioda2_phb(np);

arch/powerpc/platforms/powernv/pci.h

@@ -4,16 +4,14 @@
 struct pci_dn;
 
 enum pnv_phb_type {
-	PNV_PHB_P5IOC2	= 0,
-	PNV_PHB_IODA1	= 1,
-	PNV_PHB_IODA2	= 2,
-	PNV_PHB_NPU	= 3,
+	PNV_PHB_IODA1	= 0,
+	PNV_PHB_IODA2	= 1,
+	PNV_PHB_NPU	= 2,
 };
 
 /* Precise PHB model for error management */
 enum pnv_phb_model {
 	PNV_PHB_MODEL_UNKNOWN,
-	PNV_PHB_MODEL_P5IOC2,
 	PNV_PHB_MODEL_P7IOC,
 	PNV_PHB_MODEL_PHB3,
 	PNV_PHB_MODEL_NPU,
@@ -121,12 +119,6 @@ struct pnv_phb {
 	void (*freeze_pe)(struct pnv_phb *phb, int pe_no);
 	int (*unfreeze_pe)(struct pnv_phb *phb, int pe_no, int opt);
 
-	union {
-		struct {
-			struct iommu_table iommu_table;
-			struct iommu_table_group table_group;
-		} p5ioc2;
-
 	struct {
 		/* Global bridge info */
 		unsigned int		total_pe;
@@ -195,7 +187,6 @@ struct pnv_phb {
 		phys_addr_t		tce_inval_reg_phys;
 		__be64 __iomem		*tce_inval_reg;
 	} ioda;
-	};
 
 	/* PHB and hub status structure */
 	union {
@@ -232,7 +223,6 @@ extern void pnv_pci_unlink_table_and_group(struct iommu_table *tbl,
 extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
 				      void *tce_mem, u64 tce_size,
 				      u64 dma_offset, unsigned page_shift);
-extern void pnv_pci_init_p5ioc2_hub(struct device_node *np);
 extern void pnv_pci_init_ioda_hub(struct device_node *np);
 extern void pnv_pci_init_ioda2_phb(struct device_node *np);
 extern void pnv_pci_init_npu_phb(struct device_node *np);