Commit 2ed7a806 authored by Alex Chiang's avatar Alex Chiang Committed by Jesse Barnes

x86/PCI: remove early PCI pr_debug statements

commit db635adc turned -DDEBUG for x86/pci on when CONFIG_PCI_DEBUG
is set. In general, I agree with that change.

However, it exposes a bunch of very low level PCI debugging in the
early x86 path, such as:

	0 reading 2 from a: ffff
	1 reading 2 from a: ffff
	2 reading 2 from a: ffff
	3 reading 2 from a: 300
	3 reading 2 from 0: 1002
	3 reading 2 from 2: 515e

These statements add a lot of noise to the boot and aren't likely to
be necessary even when handling random upstream bug reports.

[In contrast, statements such as these:

	pci 0000:02:04.0: found [14e4:164a] class 000200 header type 00
	pci 0000:02:04.0: reg 10: [mem 0xf8000000-0xf9ffffff 64bit]
	pci 0000:02:04.0: reg 30: [mem 0x00000000-0x0001ffff pref]

are indeed useful when remote debugging users' machines]

Remove the noisy printks and save electrons everywhere.

Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: default avatarAlex Chiang <achiang@hp.com>
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
parent 5651c48c
......@@ -12,8 +12,6 @@ u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset)
u32 v;
outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
v = inl(0xcfc);
if (v != 0xffffffff)
pr_debug("%x reading 4 from %x: %x\n", slot, offset, v);
return v;
}
......@@ -22,7 +20,6 @@ u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset)
u8 v;
outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
v = inb(0xcfc + (offset&3));
pr_debug("%x reading 1 from %x: %x\n", slot, offset, v);
return v;
}
......@@ -31,28 +28,24 @@ u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset)
u16 v;
outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
v = inw(0xcfc + (offset&2));
pr_debug("%x reading 2 from %x: %x\n", slot, offset, v);
return v;
}
void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset,
u32 val)
{
pr_debug("%x writing to %x: %x\n", slot, offset, val);
outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
outl(val, 0xcfc);
}
void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val)
{
pr_debug("%x writing to %x: %x\n", slot, offset, val);
outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
outb(val, 0xcfc + (offset&3));
}
void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val)
{
pr_debug("%x writing to %x: %x\n", slot, offset, val);
outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
outw(val, 0xcfc + (offset&2));
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment