iio: pressure: bmp280: use devm action and remove labels from probe

We can drop some duplicate code if we use devm_action for disabling
regulators and pm and the managed variant of iio_device_register().

This allows us to completely remove all remove() callbacks from both
i2c and spi code.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/pressure/bmp280-core.c

@@ -986,6 +986,22 @@ static int bmp085_fetch_eoc_irq(struct device *dev,
 	return 0;
 }
 
+static void bmp280_pm_disable(void *data)
+{
+	struct device *dev = data;
+
+	pm_runtime_get_sync(dev);
+	pm_runtime_put_noidle(dev);
+	pm_runtime_disable(dev);
+}
+
+static void bmp280_regulators_disable(void *data)
+{
+	struct regulator_bulk_data *supplies = data;
+
+	regulator_bulk_disable(BMP280_NUM_SUPPLIES, supplies);
+}
+
 int bmp280_common_probe(struct device *dev,
 			struct regmap *regmap,
 			unsigned int chip,
@@ -1057,6 +1073,11 @@ int bmp280_common_probe(struct device *dev,
 		return ret;
 	}
 
+	ret = devm_add_action_or_reset(dev, bmp280_regulators_disable,
+				       data->supplies);
+	if (ret)
+		return ret;
+
 	/* Wait to make sure we started up properly */
 	usleep_range(data->start_up_time, data->start_up_time + 100);
 
@@ -1071,17 +1092,16 @@ int bmp280_common_probe(struct device *dev,
 	data->regmap = regmap;
 	ret = regmap_read(regmap, BMP280_REG_ID, &chip_id);
 	if (ret < 0)
-		goto out_disable_regulators;
+		return ret;
 	if (chip_id != chip) {
 		dev_err(dev, "bad chip id: expected %x got %x\n",
 			chip, chip_id);
-		ret = -EINVAL;
-		goto out_disable_regulators;
+		return -EINVAL;
 	}
 
 	ret = data->chip_info->chip_config(data);
 	if (ret < 0)
-		goto out_disable_regulators;
+		return ret;
 
 	dev_set_drvdata(dev, indio_dev);
 
@@ -1095,14 +1115,14 @@ int bmp280_common_probe(struct device *dev,
 		if (ret < 0) {
 			dev_err(data->dev,
 				"failed to read calibration coefficients\n");
-			goto out_disable_regulators;
+			return ret;
 		}
 	} else if (chip_id == BMP280_CHIP_ID || chip_id == BME280_CHIP_ID) {
 		ret = bmp280_read_calib(data, &data->calib.bmp280, chip_id);
 		if (ret < 0) {
 			dev_err(data->dev,
 				"failed to read calibration coefficients\n");
-			goto out_disable_regulators;
+			return ret;
 		}
 	}
 
@@ -1114,7 +1134,7 @@ int bmp280_common_probe(struct device *dev,
 	if (irq > 0 || (chip_id  == BMP180_CHIP_ID)) {
 		ret = bmp085_fetch_eoc_irq(dev, name, irq, data);
 		if (ret)
-			goto out_disable_regulators;
+			return ret;
 	}
 
 	/* Enable runtime PM */
@@ -1129,35 +1149,13 @@ int bmp280_common_probe(struct device *dev,
 	pm_runtime_use_autosuspend(dev);
 	pm_runtime_put(dev);
 
-	ret = iio_device_register(indio_dev);
+	ret = devm_add_action_or_reset(dev, bmp280_pm_disable, dev);
 	if (ret)
-		goto out_runtime_pm_disable;
-
-	return 0;
-
-out_runtime_pm_disable:
-	pm_runtime_get_sync(data->dev);
-	pm_runtime_put_noidle(data->dev);
-	pm_runtime_disable(data->dev);
-out_disable_regulators:
-	regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
 		return ret;
-}
-EXPORT_SYMBOL(bmp280_common_probe);
 
-int bmp280_common_remove(struct device *dev)
-{
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct bmp280_data *data = iio_priv(indio_dev);
-
-	iio_device_unregister(indio_dev);
-	pm_runtime_get_sync(data->dev);
-	pm_runtime_put_noidle(data->dev);
-	pm_runtime_disable(data->dev);
-	regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
-	return 0;
+	return devm_iio_device_register(dev, indio_dev);
 }
-EXPORT_SYMBOL(bmp280_common_remove);
+EXPORT_SYMBOL(bmp280_common_probe);
 
 #ifdef CONFIG_PM
 static int bmp280_runtime_suspend(struct device *dev)

drivers/iio/pressure/bmp280-i2c.c

@@ -38,11 +38,6 @@ static int bmp280_i2c_probe(struct i2c_client *client,
 				   client->irq);
 }
 
-static int bmp280_i2c_remove(struct i2c_client *client)
-{
-	return bmp280_common_remove(&client->dev);
-}
-
 static const struct acpi_device_id bmp280_acpi_i2c_match[] = {
 	{"BMP0280", BMP280_CHIP_ID },
 	{"BMP0180", BMP180_CHIP_ID },
@@ -82,7 +77,6 @@ static struct i2c_driver bmp280_i2c_driver = {
 		.pm = &bmp280_dev_pm_ops,
 	},
 	.probe		= bmp280_i2c_probe,
-	.remove		= bmp280_i2c_remove,
 	.id_table	= bmp280_i2c_id,
 };
 module_i2c_driver(bmp280_i2c_driver);

drivers/iio/pressure/bmp280-spi.c

@@ -86,11 +86,6 @@ static int bmp280_spi_probe(struct spi_device *spi)
 				   spi->irq);
 }
 
-static int bmp280_spi_remove(struct spi_device *spi)
-{
-	return bmp280_common_remove(&spi->dev);
-}
-
 static const struct of_device_id bmp280_of_spi_match[] = {
 	{ .compatible = "bosch,bmp085", },
 	{ .compatible = "bosch,bmp180", },
@@ -118,7 +113,6 @@ static struct spi_driver bmp280_spi_driver = {
 	},
 	.id_table = bmp280_spi_id,
 	.probe = bmp280_spi_probe,
-	.remove = bmp280_spi_remove,
 };
 module_spi_driver(bmp280_spi_driver);
 

drivers/iio/pressure/bmp280.h

@@ -112,7 +112,6 @@ int bmp280_common_probe(struct device *dev,
 			unsigned int chip,
 			const char *name,
 			int irq);
-int bmp280_common_remove(struct device *dev);
 
 /* PM ops */
 extern const struct dev_pm_ops bmp280_dev_pm_ops;