Commit 2f4db6f7 authored by Łukasz Stelmach's avatar Łukasz Stelmach Committed by Mark Brown

spi: spi-s3c64xx: Check return values

Check return values in prepare_dma() and s3c64xx_spi_config() and
propagate errors upwards.

Fixes: 78843727 ("spi: s3c64xx: move to generic dmaengine API")
Reviewed-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: default avatarŁukasz Stelmach <l.stelmach@samsung.com>
Link: https://lore.kernel.org/r/20201002122243.26849-4-l.stelmach@samsung.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent ab4efca2
......@@ -122,6 +122,7 @@
struct s3c64xx_spi_dma_data {
struct dma_chan *ch;
dma_cookie_t cookie;
enum dma_transfer_direction direction;
};
......@@ -271,12 +272,13 @@ static void s3c64xx_spi_dmacb(void *data)
spin_unlock_irqrestore(&sdd->lock, flags);
}
static void prepare_dma(struct s3c64xx_spi_dma_data *dma,
static int prepare_dma(struct s3c64xx_spi_dma_data *dma,
struct sg_table *sgt)
{
struct s3c64xx_spi_driver_data *sdd;
struct dma_slave_config config;
struct dma_async_tx_descriptor *desc;
int ret;
memset(&config, 0, sizeof(config));
......@@ -300,12 +302,24 @@ static void prepare_dma(struct s3c64xx_spi_dma_data *dma,
desc = dmaengine_prep_slave_sg(dma->ch, sgt->sgl, sgt->nents,
dma->direction, DMA_PREP_INTERRUPT);
if (!desc) {
dev_err(&sdd->pdev->dev, "unable to prepare %s scatterlist",
dma->direction == DMA_DEV_TO_MEM ? "rx" : "tx");
return -ENOMEM;
}
desc->callback = s3c64xx_spi_dmacb;
desc->callback_param = dma;
dmaengine_submit(desc);
dma->cookie = dmaengine_submit(desc);
ret = dma_submit_error(dma->cookie);
if (ret) {
dev_err(&sdd->pdev->dev, "DMA submission failed");
return -EIO;
}
dma_async_issue_pending(dma->ch);
return 0;
}
static void s3c64xx_spi_set_cs(struct spi_device *spi, bool enable)
......@@ -355,11 +369,12 @@ static bool s3c64xx_spi_can_dma(struct spi_master *master,
return xfer->len > (FIFO_LVL_MASK(sdd) >> 1) + 1;
}
static void s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd,
static int s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd,
struct spi_transfer *xfer, int dma_mode)
{
void __iomem *regs = sdd->regs;
u32 modecfg, chcfg;
int ret = 0;
modecfg = readl(regs + S3C64XX_SPI_MODE_CFG);
modecfg &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON);
......@@ -385,7 +400,7 @@ static void s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd,
chcfg |= S3C64XX_SPI_CH_TXCH_ON;
if (dma_mode) {
modecfg |= S3C64XX_SPI_MODE_TXDMA_ON;
prepare_dma(&sdd->tx_dma, &xfer->tx_sg);
ret = prepare_dma(&sdd->tx_dma, &xfer->tx_sg);
} else {
switch (sdd->cur_bpw) {
case 32:
......@@ -417,12 +432,17 @@ static void s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd,
writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff)
| S3C64XX_SPI_PACKET_CNT_EN,
regs + S3C64XX_SPI_PACKET_CNT);
prepare_dma(&sdd->rx_dma, &xfer->rx_sg);
ret = prepare_dma(&sdd->rx_dma, &xfer->rx_sg);
}
}
if (ret)
return ret;
writel(modecfg, regs + S3C64XX_SPI_MODE_CFG);
writel(chcfg, regs + S3C64XX_SPI_CH_CFG);
return 0;
}
static u32 s3c64xx_spi_wait_for_timeout(struct s3c64xx_spi_driver_data *sdd,
......@@ -555,9 +575,10 @@ static int s3c64xx_wait_for_pio(struct s3c64xx_spi_driver_data *sdd,
return 0;
}
static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
static int s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
{
void __iomem *regs = sdd->regs;
int ret;
u32 val;
/* Disable Clock */
......@@ -605,7 +626,9 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
if (sdd->port_conf->clk_from_cmu) {
/* The src_clk clock is divided internally by 2 */
clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);
ret = clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);
if (ret)
return ret;
} else {
/* Configure Clock */
val = readl(regs + S3C64XX_SPI_CLK_CFG);
......@@ -619,6 +642,8 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
val |= S3C64XX_SPI_ENCLK_ENABLE;
writel(val, regs + S3C64XX_SPI_CLK_CFG);
}
return 0;
}
#define XFER_DMAADDR_INVALID DMA_BIT_MASK(32)
......@@ -661,7 +686,9 @@ static int s3c64xx_spi_transfer_one(struct spi_master *master,
sdd->cur_bpw = bpw;
sdd->cur_speed = speed;
sdd->cur_mode = spi->mode;
s3c64xx_spi_config(sdd);
status = s3c64xx_spi_config(sdd);
if (status)
return status;
}
if (!is_polling(sdd) && (xfer->len > fifo_len) &&
......@@ -688,10 +715,15 @@ static int s3c64xx_spi_transfer_one(struct spi_master *master,
/* Start the signals */
s3c64xx_spi_set_cs(spi, true);
s3c64xx_enable_datapath(sdd, xfer, use_dma);
status = s3c64xx_enable_datapath(sdd, xfer, use_dma);
spin_unlock_irqrestore(&sdd->lock, flags);
if (status) {
dev_err(&spi->dev, "failed to enable data path for transfer: %d\n", status);
break;
}
if (use_dma)
status = s3c64xx_wait_for_dma(sdd, xfer);
else
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment