Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux

Pull GPIO changes from Grant Likely:
 "The usual selection of bug fixes and driver updates for GPIO.  Nothing
  really stands out except the addition of the GRGPIO driver and some
  enhacements to ACPI support"

I'm pulling this despite the earlier mess.  Let's hope it compiles these
days.

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: (46 commits)
  gpio: grgpio: Add irq support
  gpio: grgpio: Add device driver for GRGPIO cores
  gpiolib-acpi: introduce acpi_get_gpio_by_index() helper
  GPIO: gpio-generic: remove kfree() from bgpio_remove call
  gpio / ACPI: Handle ACPI events in accordance with the spec
  gpio: lpc32xx: Fix off-by-one valid range checking for bank
  gpio: mcp23s08: convert driver to DT
  gpio/omap: force restore if context loss is not detectable
  gpio/omap: optimise interrupt service routine
  gpio/omap: remove extra context restores in *_runtime_resume()
  gpio/omap: free irq domain in probe() failure paths
  gpio: gpio-generic: Add 16 and 32 bit big endian byte order support
  gpio: samsung: Add terminating entry for exynos_pinctrl_ids
  gpio: mvebu: add dbg_show function
  MAX7301 GPIO: Do not force SPI speed when using OF Platform
  gpio: gpio-tps65910.c: fix checkpatch error
  gpio: gpio-timberdale.c: fix checkpatch error
  gpio: gpio-tc3589x.c: fix checkpatch errors
  gpio: gpio-stp-xway.c: fix checkpatch error
  gpio: gpio-sch.c: fix checkpatch error
  ...

Documentation/acpi/enumeration.txt

@@ -199,6 +199,8 @@ the device to the driver. For example:
 	{
 		Name (SBUF, ResourceTemplate()
 		{
+			...
+			// Used to power on/off the device
 			GpioIo (Exclusive, PullDefault, 0x0000, 0x0000,
 				IoRestrictionOutputOnly, "\\_SB.PCI0.GPI0",
 				0x00, ResourceConsumer,,)
@@ -206,10 +208,20 @@ the device to the driver. For example:
 				// Pin List
 				0x0055
 			}
+
+			// Interrupt for the device
+			GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone,
+				 0x0000, "\\_SB.PCI0.GPI0", 0x00, ResourceConsumer,,)
+			{
+				// Pin list
+				0x0058
+			}
+
 			...
 
-			Return (SBUF)
 		}
+
+		Return (SBUF)
 	}
 
 These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0"
@@ -220,6 +232,24 @@ The driver can do this by including <linux/acpi_gpio.h> and then calling
 acpi_get_gpio(path, gpio). This will return the Linux GPIO number or
 negative errno if there was no translation found.
 
+In a simple case of just getting the Linux GPIO number from device
+resources one can use acpi_get_gpio_by_index() helper function. It takes
+pointer to the device and index of the GpioIo/GpioInt descriptor in the
+device resources list. For example:
+
+	int gpio_irq, gpio_power;
+	int ret;
+
+	gpio_irq = acpi_get_gpio_by_index(dev, 1, NULL);
+	if (gpio_irq < 0)
+		/* handle error */
+
+	gpio_power = acpi_get_gpio_by_index(dev, 0, NULL);
+	if (gpio_power < 0)
+		/* handle error */
+
+	/* Now we can use the GPIO numbers */
+
 Other GpioIo parameters must be converted first by the driver to be
 suitable to the gpiolib before passing them.
 

Documentation/devicetree/bindings/gpio/gpio-grgpio.txt

+Aeroflex Gaisler GRGPIO General Purpose I/O cores.
+
+The GRGPIO GPIO core is available in the GRLIB VHDL IP core library.
+
+Note: In the ordinary environment for the GRGPIO core, a Leon SPARC system,
+these properties are built from information in the AMBA plug&play.
+
+Required properties:
+
+- name : Should be "GAISLER_GPIO" or "01_01a"
+
+- reg : Address and length of the register set for the device
+
+- interrupts : Interrupt numbers for this device
+
+Optional properties:
+
+- nbits : The number of gpio lines. If not present driver assumes 32 lines.
+
+- irqmap : An array with an index for each gpio line. An index is either a valid
+	index into the interrupts property array, or 0xffffffff that indicates
+	no irq for that line. Driver provides no interrupt support if not
+	present.
+
+For further information look in the documentation for the GLIB IP core library:
+http://www.gaisler.com/products/grlib/grip.pdf

Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt

+Microchip MCP2308/MCP23S08/MCP23017/MCP23S17 driver for
+8-/16-bit I/O expander with serial interface (I2C/SPI)
+
+Required properties:
+- compatible : Should be
+    - "mcp,mcp23s08" for  8 GPIO SPI version
+    - "mcp,mcp23s17" for 16 GPIO SPI version
+    - "mcp,mcp23008" for  8 GPIO I2C version or
+    - "mcp,mcp23017" for 16 GPIO I2C version of the chip
+- #gpio-cells : Should be two.
+  - first cell is the pin number
+  - second cell is used to specify flags. Flags are currently unused.
+- gpio-controller : Marks the device node as a GPIO controller.
+- reg : For an address on its bus. I2C uses this a the I2C address of the chip.
+        SPI uses this to specify the chipselect line which the chip is
+        connected to. The driver and the SPI variant of the chip support
+        multiple chips on the same chipselect. Have a look at
+        mcp,spi-present-mask below.
+
+Required device specific properties (only for SPI chips):
+- mcp,spi-present-mask : This is a present flag, that makes only sense for SPI
+        chips - as the name suggests. Multiple SPI chips can share the same
+        SPI chipselect. Set a bit in bit0-7 in this mask to 1 if there is a
+        chip connected with the corresponding spi address set. For example if
+        you have a chip with address 3 connected, you have to set bit3 to 1,
+        which is 0x08. mcp23s08 chip variant only supports bits 0-3. It is not
+        possible to mix mcp23s08 and mcp23s17 on the same chipselect. Set at
+        least one bit to 1 for SPI chips.
+- spi-max-frequency = The maximum frequency this chip is able to handle
+
+Example I2C:
+gpiom1: gpio@20 {
+        compatible = "mcp,mcp23017";
+        gpio-controller;
+        #gpio-cells = <2>;
+        reg = <0x20>;
+};
+
+Example SPI:
+gpiom1: gpio@0 {
+        compatible = "mcp,mcp23s17";
+        gpio-controller;
+        #gpio-cells = <2>;
+        spi-present-mask = <0x01>;
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+};

Documentation/devicetree/bindings/gpio/gpio-omap.txt

@@ -20,8 +20,11 @@ Required properties:
       8 = active low level-sensitive.
 
 OMAP specific properties:
-- ti,hwmods: Name of the hwmod associated to the GPIO:
-  "gpio<X>", <X> being the 1-based instance number from the HW spec
+- ti,hwmods:		Name of the hwmod associated to the GPIO:
+			"gpio<X>", <X> being the 1-based instance number
+			from the HW spec.
+- ti,gpio-always-on: 	Indicates if a GPIO bank is always powered and
+			so will never lose its logic state.
 
 
 Example:

drivers/gpio/Kconfig

@@ -297,12 +297,21 @@ config GPIO_GE_FPGA
 
 config GPIO_LYNXPOINT
 	bool "Intel Lynxpoint GPIO support"
-	depends on ACPI
+	depends on ACPI && X86
 	select IRQ_DOMAIN
 	help
 	  driver for GPIO functionality on Intel Lynxpoint PCH chipset
 	  Requires ACPI device enumeration code to set up a platform device.
 
+config GPIO_GRGPIO
+	tristate "Aeroflex Gaisler GRGPIO support"
+	depends on OF
+	select GPIO_GENERIC
+	select IRQ_DOMAIN
+	help
+	  Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB
+	  VHDL IP core library.
+
 comment "I2C GPIO expanders:"
 
 config GPIO_ARIZONA

drivers/gpio/Makefile

@@ -25,6 +25,7 @@ obj-$(CONFIG_ARCH_DAVINCI)	+= gpio-davinci.o
 obj-$(CONFIG_GPIO_EM)		+= gpio-em.o
 obj-$(CONFIG_GPIO_EP93XX)	+= gpio-ep93xx.o
 obj-$(CONFIG_GPIO_GE_FPGA)	+= gpio-ge.o
+obj-$(CONFIG_GPIO_GRGPIO)	+= gpio-grgpio.o
 obj-$(CONFIG_GPIO_ICH)		+= gpio-ich.o
 obj-$(CONFIG_GPIO_IT8761E)	+= gpio-it8761e.o
 obj-$(CONFIG_GPIO_JANZ_TTL)	+= gpio-janz-ttl.o

drivers/gpio/gpio-74x164.c

@@ -137,7 +137,7 @@ static int gen_74x164_probe(struct spi_device *spi)
 
 	mutex_init(&chip->lock);
 
-	dev_set_drvdata(&spi->dev, chip);
+	spi_set_drvdata(spi, chip);
 
 	chip->spi = spi;
 
@@ -176,7 +176,7 @@ static int gen_74x164_probe(struct spi_device *spi)
 	return ret;
 
 exit_destroy:
-	dev_set_drvdata(&spi->dev, NULL);
+	spi_set_drvdata(spi, NULL);
 	mutex_destroy(&chip->lock);
 	return ret;
 }
@@ -186,11 +186,11 @@ static int gen_74x164_remove(struct spi_device *spi)
 	struct gen_74x164_chip *chip;
 	int ret;
 
-	chip = dev_get_drvdata(&spi->dev);
+	chip = spi_get_drvdata(spi);
 	if (chip == NULL)
 		return -ENODEV;
 
-	dev_set_drvdata(&spi->dev, NULL);
+	spi_set_drvdata(spi, NULL);
 
 	ret = gpiochip_remove(&chip->gpio_chip);
 	if (!ret)

drivers/gpio/gpio-adp5520.c

@@ -105,7 +105,7 @@ static int adp5520_gpio_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
 	if (dev == NULL) {
 		dev_err(&pdev->dev, "failed to alloc memory\n");
 		return -ENOMEM;
@@ -163,7 +163,6 @@ static int adp5520_gpio_probe(struct platform_device *pdev)
 	return 0;
 
 err:
-	kfree(dev);
 	return ret;
 }
 
@@ -180,7 +179,6 @@ static int adp5520_gpio_remove(struct platform_device *pdev)
 		return ret;
 	}
 
-	kfree(dev);
 	return 0;
 }
 

drivers/gpio/gpio-em.c

@@ -231,10 +231,12 @@ static int em_gio_irq_domain_map(struct irq_domain *h, unsigned int virq,
 
 static struct irq_domain_ops em_gio_irq_domain_ops = {
 	.map	= em_gio_irq_domain_map,
+	.xlate	= irq_domain_xlate_twocell,
 };
 
 static int em_gio_probe(struct platform_device *pdev)
 {
+	struct gpio_em_config pdata_dt;
 	struct gpio_em_config *pdata = pdev->dev.platform_data;
 	struct em_gio_priv *p;
 	struct resource *io[2], *irq[2];
@@ -243,7 +245,7 @@ static int em_gio_probe(struct platform_device *pdev)
 	const char *name = dev_name(&pdev->dev);
 	int ret;
 
-	p = kzalloc(sizeof(*p), GFP_KERNEL);
+	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
 	if (!p) {
 		dev_err(&pdev->dev, "failed to allocate driver data\n");
 		ret = -ENOMEM;
@@ -259,24 +261,45 @@ static int em_gio_probe(struct platform_device *pdev)
 	irq[0] = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	irq[1] = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
 
-	if (!io[0] || !io[1] || !irq[0] || !irq[1] || !pdata) {
-		dev_err(&pdev->dev, "missing IRQ, IOMEM or configuration\n");
+	if (!io[0] || !io[1] || !irq[0] || !irq[1]) {
+		dev_err(&pdev->dev, "missing IRQ or IOMEM\n");
 		ret = -EINVAL;
-		goto err1;
+		goto err0;
 	}
 
-	p->base0 = ioremap_nocache(io[0]->start, resource_size(io[0]));
+	p->base0 = devm_ioremap_nocache(&pdev->dev, io[0]->start,
+					resource_size(io[0]));
 	if (!p->base0) {
 		dev_err(&pdev->dev, "failed to remap low I/O memory\n");
 		ret = -ENXIO;
-		goto err1;
+		goto err0;
 	}
 
-	p->base1 = ioremap_nocache(io[1]->start, resource_size(io[1]));
+	p->base1 = devm_ioremap_nocache(&pdev->dev, io[1]->start,
+				   resource_size(io[1]));
 	if (!p->base1) {
 		dev_err(&pdev->dev, "failed to remap high I/O memory\n");
 		ret = -ENXIO;
-		goto err2;
+		goto err0;
+	}
+
+	if (!pdata) {
+		memset(&pdata_dt, 0, sizeof(pdata_dt));
+		pdata = &pdata_dt;
+
+		if (of_property_read_u32(pdev->dev.of_node, "ngpios",
+					 &pdata->number_of_pins)) {
+			dev_err(&pdev->dev, "Missing ngpios OF property\n");
+			ret = -EINVAL;
+			goto err0;
+		}
+
+		ret = of_alias_get_id(pdev->dev.of_node, "gpio");
+		if (ret < 0) {
+			dev_err(&pdev->dev, "Couldn't get OF id\n");
+			goto err0;
+		}
+		pdata->gpio_base = ret * 32; /* 32 GPIOs per instance */
 	}
 
 	gpio_chip = &p->gpio_chip;
@@ -306,40 +329,32 @@ static int em_gio_probe(struct platform_device *pdev)
 	if (!p->irq_domain) {
 		ret = -ENXIO;
 		dev_err(&pdev->dev, "cannot initialize irq domain\n");
-		goto err3;
+		goto err0;
 	}
 
-	if (request_irq(irq[0]->start, em_gio_irq_handler, 0, name, p)) {
+	if (devm_request_irq(&pdev->dev, irq[0]->start,
+			     em_gio_irq_handler, 0, name, p)) {
 		dev_err(&pdev->dev, "failed to request low IRQ\n");
 		ret = -ENOENT;
-		goto err4;
+		goto err1;
 	}
 
-	if (request_irq(irq[1]->start, em_gio_irq_handler, 0, name, p)) {
+	if (devm_request_irq(&pdev->dev, irq[1]->start,
+			     em_gio_irq_handler, 0, name, p)) {
 		dev_err(&pdev->dev, "failed to request high IRQ\n");
 		ret = -ENOENT;
-		goto err5;
+		goto err1;
 	}
 
 	ret = gpiochip_add(gpio_chip);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add GPIO controller\n");
-		goto err6;
+		goto err1;
 	}
 	return 0;
 
-err6:
-	free_irq(irq[1]->start, pdev);
-err5:
-	free_irq(irq[0]->start, pdev);
-err4:
-	irq_domain_remove(p->irq_domain);
-err3:
-	iounmap(p->base1);
-err2:
-	iounmap(p->base0);
 err1:
-	kfree(p);
+	irq_domain_remove(p->irq_domain);
 err0:
 	return ret;
 }
@@ -347,34 +362,43 @@ static int em_gio_probe(struct platform_device *pdev)
 static int em_gio_remove(struct platform_device *pdev)
 {
 	struct em_gio_priv *p = platform_get_drvdata(pdev);
-	struct resource *irq[2];
 	int ret;
 
 	ret = gpiochip_remove(&p->gpio_chip);
 	if (ret)
 		return ret;
 
-	irq[0] = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	irq[1] = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
-
-	free_irq(irq[1]->start, pdev);
-	free_irq(irq[0]->start, pdev);
 	irq_domain_remove(p->irq_domain);
-	iounmap(p->base1);
-	iounmap(p->base0);
-	kfree(p);
 	return 0;
 }
 
+static const struct of_device_id em_gio_dt_ids[] = {
+	{ .compatible = "renesas,em-gio", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, em_gio_dt_ids);
+
 static struct platform_driver em_gio_device_driver = {
 	.probe		= em_gio_probe,
 	.remove		= em_gio_remove,
 	.driver		= {
 		.name	= "em_gio",
+		.of_match_table = em_gio_dt_ids,
+		.owner		= THIS_MODULE,
 	}
 };
 
-module_platform_driver(em_gio_device_driver);
+static int __init em_gio_init(void)
+{
+	return platform_driver_register(&em_gio_device_driver);
+}
+postcore_initcall(em_gio_init);
+
+static void __exit em_gio_exit(void)
+{
+	platform_driver_unregister(&em_gio_device_driver);
+}
+module_exit(em_gio_exit);
 
 MODULE_AUTHOR("Magnus Damm");
 MODULE_DESCRIPTION("Renesas Emma Mobile GIO Driver");

drivers/gpio/gpio-generic.c

@@ -104,6 +104,26 @@ static unsigned long bgpio_read64(void __iomem *reg)
 }
 #endif /* BITS_PER_LONG >= 64 */
 
+static void bgpio_write16be(void __iomem *reg, unsigned long data)
+{
+	iowrite16be(data, reg);
+}
+
+static unsigned long bgpio_read16be(void __iomem *reg)
+{
+	return ioread16be(reg);
+}
+
+static void bgpio_write32be(void __iomem *reg, unsigned long data)
+{
+	iowrite32be(data, reg);
+}
+
+static unsigned long bgpio_read32be(void __iomem *reg)
+{
+	return ioread32be(reg);
+}
+
 static unsigned long bgpio_pin2mask(struct bgpio_chip *bgc, unsigned int pin)
 {
 	return 1 << pin;
@@ -249,7 +269,8 @@ static int bgpio_dir_out_inv(struct gpio_chip *gc, unsigned int gpio, int val)
 
 static int bgpio_setup_accessors(struct device *dev,
 				 struct bgpio_chip *bgc,
-				 bool be)
+				 bool bit_be,
+				 bool byte_be)
 {
 
 	switch (bgc->bits) {
@@ -258,17 +279,33 @@ static int bgpio_setup_accessors(struct device *dev,
 		bgc->write_reg	= bgpio_write8;
 		break;
 	case 16:
-		bgc->read_reg	= bgpio_read16;
-		bgc->write_reg	= bgpio_write16;
+		if (byte_be) {
+			bgc->read_reg	= bgpio_read16be;
+			bgc->write_reg	= bgpio_write16be;
+		} else {
+			bgc->read_reg	= bgpio_read16;
+			bgc->write_reg	= bgpio_write16;
+		}
 		break;
 	case 32:
-		bgc->read_reg	= bgpio_read32;
-		bgc->write_reg	= bgpio_write32;
+		if (byte_be) {
+			bgc->read_reg	= bgpio_read32be;
+			bgc->write_reg	= bgpio_write32be;
+		} else {
+			bgc->read_reg	= bgpio_read32;
+			bgc->write_reg	= bgpio_write32;
+		}
 		break;
 #if BITS_PER_LONG >= 64
 	case 64:
-		bgc->read_reg	= bgpio_read64;
-		bgc->write_reg	= bgpio_write64;
+		if (byte_be) {
+			dev_err(dev,
+				"64 bit big endian byte order unsupported\n");
+			return -EINVAL;
+		} else {
+			bgc->read_reg	= bgpio_read64;
+			bgc->write_reg	= bgpio_write64;
+		}
 		break;
 #endif /* BITS_PER_LONG >= 64 */
 	default:
@@ -276,7 +313,7 @@ static int bgpio_setup_accessors(struct device *dev,
 		return -EINVAL;
 	}
 
-	bgc->pin2mask = be ? bgpio_pin2mask_be : bgpio_pin2mask;
+	bgc->pin2mask = bit_be ? bgpio_pin2mask_be : bgpio_pin2mask;
 
 	return 0;
 }
@@ -353,11 +390,7 @@ static int bgpio_setup_direction(struct bgpio_chip *bgc,
 
 int bgpio_remove(struct bgpio_chip *bgc)
 {
-	int err = gpiochip_remove(&bgc->gc);
-
-	kfree(bgc);
-
-	return err;
+	return gpiochip_remove(&bgc->gc);
 }
 EXPORT_SYMBOL_GPL(bgpio_remove);
 
@@ -385,7 +418,8 @@ int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
 	if (ret)
 		return ret;
 
-	ret = bgpio_setup_accessors(dev, bgc, flags & BGPIOF_BIG_ENDIAN);
+	ret = bgpio_setup_accessors(dev, bgc, flags & BGPIOF_BIG_ENDIAN,
+				    flags & BGPIOF_BIG_ENDIAN_BYTE_ORDER);
 	if (ret)
 		return ret;
 

drivers/gpio/gpio-ich.c

@@ -130,14 +130,11 @@ static int ichx_read_bit(int reg, unsigned nr)
 
 static bool ichx_gpio_check_available(struct gpio_chip *gpio, unsigned nr)
 {
-	return ichx_priv.use_gpio & (1 << (nr / 32));
+	return !!(ichx_priv.use_gpio & (1 << (nr / 32)));
 }
 
 static int ichx_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
 {
-	if (!ichx_gpio_check_available(gpio, nr))
-		return -ENXIO;
-
 	/*
 	 * Try setting pin as an input and verify it worked since many pins
 	 * are output-only.
@@ -151,9 +148,6 @@ static int ichx_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
 static int ichx_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
 					int val)
 {
-	if (!ichx_gpio_check_available(gpio, nr))
-		return -ENXIO;
-
 	/* Set GPIO output value. */
 	ichx_write_bit(GPIO_LVL, nr, val, 0);
 
@@ -169,9 +163,6 @@ static int ichx_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
 
 static int ichx_gpio_get(struct gpio_chip *chip, unsigned nr)
 {
-	if (!ichx_gpio_check_available(chip, nr))
-		return -ENXIO;
-
 	return ichx_read_bit(GPIO_LVL, nr);
 }
 
@@ -180,9 +171,6 @@ static int ich6_gpio_get(struct gpio_chip *chip, unsigned nr)
 	unsigned long flags;
 	u32 data;
 
-	if (!ichx_gpio_check_available(chip, nr))
-		return -ENXIO;
-
 	/*
 	 * GPI 0 - 15 need to be read from the power management registers on
 	 * a ICH6/3100 bridge.
@@ -207,6 +195,9 @@ static int ich6_gpio_get(struct gpio_chip *chip, unsigned nr)
 
 static int ichx_gpio_request(struct gpio_chip *chip, unsigned nr)
 {
+	if (!ichx_gpio_check_available(chip, nr))
+		return -ENXIO;
+
 	/*
 	 * Note we assume the BIOS properly set a bridge's USE value.  Some
 	 * chips (eg Intel 3100) have bogus USE values though, so first see if

drivers/gpio/gpio-lpc32xx.c

@@ -533,7 +533,7 @@ static int lpc32xx_of_xlate(struct gpio_chip *gc,
 {
 	/* Is this the correct bank? */
 	u32 bank = gpiospec->args[0];
-	if ((bank > ARRAY_SIZE(lpc32xx_gpiochip) ||
+	if ((bank >= ARRAY_SIZE(lpc32xx_gpiochip) ||
 	    (gc != &lpc32xx_gpiochip[bank].chip)))
 		return -EINVAL;
 

drivers/gpio/gpio-lynxpoint.c

@@ -32,6 +32,7 @@
 #include <linux/acpi.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
+#include <linux/io.h>
 
 /* LynxPoint chipset has support for 94 gpio pins */
 

drivers/gpio/gpio-max7300.c

@@ -41,7 +41,7 @@ static int max7300_probe(struct i2c_client *client,
 			I2C_FUNC_SMBUS_BYTE_DATA))
 		return -EIO;
 
-	ts = kzalloc(sizeof(struct max7301), GFP_KERNEL);
+	ts = devm_kzalloc(&client->dev, sizeof(struct max7301), GFP_KERNEL);
 	if (!ts)
 		return -ENOMEM;
 
@@ -50,8 +50,6 @@ static int max7300_probe(struct i2c_client *client,
 	ts->dev = &client->dev;
 
 	ret = __max730x_probe(ts);
-	if (ret)
-		kfree(ts);
 	return ret;
 }
 

drivers/gpio/gpio-max7301.c

@@ -56,12 +56,13 @@ static int max7301_probe(struct spi_device *spi)
 	int ret;
 
 	/* bits_per_word cannot be configured in platform data */
-	spi->bits_per_word = 16;
+	if (spi->dev.platform_data)
+		spi->bits_per_word = 16;
 	ret = spi_setup(spi);
 	if (ret < 0)
 		return ret;
 
-	ts = kzalloc(sizeof(struct max7301), GFP_KERNEL);
+	ts = devm_kzalloc(&spi->dev, sizeof(struct max7301), GFP_KERNEL);
 	if (!ts)
 		return -ENOMEM;
 
@@ -70,8 +71,6 @@ static int max7301_probe(struct spi_device *spi)
 	ts->dev = &spi->dev;
 
 	ret = __max730x_probe(ts);
-	if (ret)
-		kfree(ts);
 	return ret;
 }
 

drivers/gpio/gpio-max732x.c

@@ -589,7 +589,8 @@ static int max732x_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
-	chip = kzalloc(sizeof(struct max732x_chip), GFP_KERNEL);
+	chip = devm_kzalloc(&client->dev, sizeof(struct max732x_chip),
+			GFP_KERNEL);
 	if (chip == NULL)
 		return -ENOMEM;
 	chip->client = client;
@@ -647,7 +648,6 @@ static int max732x_probe(struct i2c_client *client,
 
 out_failed:
 	max732x_irq_teardown(chip);
-	kfree(chip);
 	return ret;
 }
 
@@ -680,7 +680,6 @@ static int max732x_remove(struct i2c_client *client)
 	if (chip->client_dummy)
 		i2c_unregister_device(chip->client_dummy);
 
-	kfree(chip);
 	return 0;
 }
 

drivers/gpio/gpio-mc33880.c

@@ -101,13 +101,13 @@ static int mc33880_probe(struct spi_device *spi)
 	if (ret < 0)
 		return ret;
 
-	mc = kzalloc(sizeof(struct mc33880), GFP_KERNEL);
+	mc = devm_kzalloc(&spi->dev, sizeof(struct mc33880), GFP_KERNEL);
 	if (!mc)
 		return -ENOMEM;
 
 	mutex_init(&mc->lock);
 
-	dev_set_drvdata(&spi->dev, mc);
+	spi_set_drvdata(spi, mc);
 
 	mc->spi = spi;
 
@@ -130,7 +130,8 @@ static int mc33880_probe(struct spi_device *spi)
 		ret = mc33880_write_config(mc);
 
 	if (ret) {
-		printk(KERN_ERR "Failed writing to " DRIVER_NAME ": %d\n", ret);
+		dev_err(&spi->dev, "Failed writing to " DRIVER_NAME ": %d\n",
+			ret);
 		goto exit_destroy;
 	}
 
@@ -141,9 +142,8 @@ static int mc33880_probe(struct spi_device *spi)
 	return ret;
 
 exit_destroy:
-	dev_set_drvdata(&spi->dev, NULL);
+	spi_set_drvdata(spi, NULL);
 	mutex_destroy(&mc->lock);
-	kfree(mc);
 	return ret;
 }
 
@@ -152,17 +152,16 @@ static int mc33880_remove(struct spi_device *spi)
 	struct mc33880 *mc;
 	int ret;
 
-	mc = dev_get_drvdata(&spi->dev);
+	mc = spi_get_drvdata(spi);
 	if (mc == NULL)
 		return -ENODEV;
 
-	dev_set_drvdata(&spi->dev, NULL);
+	spi_set_drvdata(spi, NULL);
 
 	ret = gpiochip_remove(&mc->chip);
-	if (!ret) {
+	if (!ret)
 		mutex_destroy(&mc->lock);
-		kfree(mc);
-	} else
+	else
 		dev_err(&spi->dev, "Failed to remove the GPIO controller: %d\n",
 			ret);
 

drivers/gpio/gpio-mcp23s08.c

@@ -12,6 +12,8 @@
 #include <linux/spi/mcp23s08.h>
 #include <linux/slab.h>
 #include <asm/byteorder.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 /**
  * MCP types supported by driver
@@ -383,6 +385,10 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
 	mcp->chip.direction_output = mcp23s08_direction_output;
 	mcp->chip.set = mcp23s08_set;
 	mcp->chip.dbg_show = mcp23s08_dbg_show;
+#ifdef CONFIG_OF
+	mcp->chip.of_gpio_n_cells = 2;
+	mcp->chip.of_node = dev->of_node;
+#endif
 
 	switch (type) {
 #ifdef CONFIG_SPI_MASTER
@@ -473,6 +479,35 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
 
 /*----------------------------------------------------------------------*/
 
+#ifdef CONFIG_OF
+#ifdef CONFIG_SPI_MASTER
+static struct of_device_id mcp23s08_spi_of_match[] = {
+	{
+		.compatible = "mcp,mcp23s08", .data = (void *) MCP_TYPE_S08,
+	},
+	{
+		.compatible = "mcp,mcp23s17", .data = (void *) MCP_TYPE_S17,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mcp23s08_spi_of_match);
+#endif
+
+#if IS_ENABLED(CONFIG_I2C)
+static struct of_device_id mcp23s08_i2c_of_match[] = {
+	{
+		.compatible = "mcp,mcp23008", .data = (void *) MCP_TYPE_008,
+	},
+	{
+		.compatible = "mcp,mcp23017", .data = (void *) MCP_TYPE_017,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mcp23s08_i2c_of_match);
+#endif
+#endif /* CONFIG_OF */
+
+
 #if IS_ENABLED(CONFIG_I2C)
 
 static int mcp230xx_probe(struct i2c_client *client,
@@ -480,12 +515,23 @@ static int mcp230xx_probe(struct i2c_client *client,
 {
 	struct mcp23s08_platform_data *pdata;
 	struct mcp23s08 *mcp;
-	int status;
-
-	pdata = client->dev.platform_data;
-	if (!pdata || !gpio_is_valid(pdata->base)) {
-		dev_dbg(&client->dev, "invalid or missing platform data\n");
-		return -EINVAL;
+	int status, base, pullups;
+	const struct of_device_id *match;
+
+	match = of_match_device(of_match_ptr(mcp23s08_i2c_of_match),
+					&client->dev);
+	if (match) {
+		base = -1;
+		pullups = 0;
+	} else {
+		pdata = client->dev.platform_data;
+		if (!pdata || !gpio_is_valid(pdata->base)) {
+			dev_dbg(&client->dev,
+					"invalid or missing platform data\n");
+			return -EINVAL;
+		}
+		base = pdata->base;
+		pullups = pdata->chip[0].pullups;
 	}
 
 	mcp = kzalloc(sizeof *mcp, GFP_KERNEL);
@@ -493,8 +539,7 @@ static int mcp230xx_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	status = mcp23s08_probe_one(mcp, &client->dev, client, client->addr,
-				    id->driver_data, pdata->base,
-				    pdata->chip[0].pullups);
+				    id->driver_data, base, pullups);
 	if (status)
 		goto fail;
 
@@ -531,6 +576,7 @@ static struct i2c_driver mcp230xx_driver = {
 	.driver = {
 		.name	= "mcp230xx",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(mcp23s08_i2c_of_match),
 	},
 	.probe		= mcp230xx_probe,
 	.remove		= mcp230xx_remove,
@@ -565,28 +611,55 @@ static int mcp23s08_probe(struct spi_device *spi)
 	unsigned			chips = 0;
 	struct mcp23s08_driver_data	*data;
 	int				status, type;
-	unsigned			base;
-
-	type = spi_get_device_id(spi)->driver_data;
-
-	pdata = spi->dev.platform_data;
-	if (!pdata || !gpio_is_valid(pdata->base)) {
-		dev_dbg(&spi->dev, "invalid or missing platform data\n");
-		return -EINVAL;
-	}
+	unsigned			base = -1,
+					ngpio = 0,
+					pullups[ARRAY_SIZE(pdata->chip)];
+	const struct			of_device_id *match;
+	u32				spi_present_mask = 0;
+
+	match = of_match_device(of_match_ptr(mcp23s08_spi_of_match), &spi->dev);
+	if (match) {
+		type = (int)match->data;
+		status = of_property_read_u32(spi->dev.of_node,
+				"mcp,spi-present-mask", &spi_present_mask);
+		if (status) {
+			dev_err(&spi->dev, "DT has no spi-present-mask\n");
+			return -ENODEV;
+		}
+		if ((spi_present_mask <= 0) || (spi_present_mask >= 256)) {
+			dev_err(&spi->dev, "invalid spi-present-mask\n");
+			return -ENODEV;
+		}
 
-	for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) {
-		if (!pdata->chip[addr].is_present)
-			continue;
-		chips++;
-		if ((type == MCP_TYPE_S08) && (addr > 3)) {
-			dev_err(&spi->dev,
-				"mcp23s08 only supports address 0..3\n");
+		for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++)
+			pullups[addr] = 0;
+	} else {
+		type = spi_get_device_id(spi)->driver_data;
+		pdata = spi->dev.platform_data;
+		if (!pdata || !gpio_is_valid(pdata->base)) {
+			dev_dbg(&spi->dev,
+					"invalid or missing platform data\n");
 			return -EINVAL;
 		}
+
+		for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) {
+			if (!pdata->chip[addr].is_present)
+				continue;
+			chips++;
+			if ((type == MCP_TYPE_S08) && (addr > 3)) {
+				dev_err(&spi->dev,
+					"mcp23s08 only supports address 0..3\n");
+				return -EINVAL;
+			}
+			spi_present_mask |= 1 << addr;
+			pullups[addr] = pdata->chip[addr].pullups;
+		}
+
+		if (!chips)
+			return -ENODEV;
+
+		base = pdata->base;
 	}
-	if (!chips)
-		return -ENODEV;
 
 	data = kzalloc(sizeof *data + chips * sizeof(struct mcp23s08),
 			GFP_KERNEL);
@@ -594,21 +667,22 @@ static int mcp23s08_probe(struct spi_device *spi)
 		return -ENOMEM;
 	spi_set_drvdata(spi, data);
 
-	base = pdata->base;
 	for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) {
-		if (!pdata->chip[addr].is_present)
+		if (!(spi_present_mask & (1 << addr)))
 			continue;
 		chips--;
 		data->mcp[addr] = &data->chip[chips];
 		status = mcp23s08_probe_one(data->mcp[addr], &spi->dev, spi,
 					    0x40 | (addr << 1), type, base,
-					    pdata->chip[addr].pullups);
+					    pullups[addr]);
 		if (status < 0)
 			goto fail;
 
-		base += (type == MCP_TYPE_S17) ? 16 : 8;
+		if (base != -1)
+			base += (type == MCP_TYPE_S17) ? 16 : 8;
+		ngpio += (type == MCP_TYPE_S17) ? 16 : 8;
 	}
-	data->ngpio = base - pdata->base;
+	data->ngpio = ngpio;
 
 	/* NOTE:  these chips have a relatively sane IRQ framework, with
 	 * per-signal masking and level/edge triggering.  It's not yet
@@ -668,6 +742,7 @@ static struct spi_driver mcp23s08_driver = {
 	.driver = {
 		.name	= "mcp23s08",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(mcp23s08_spi_of_match),
 	},
 };
 

drivers/gpio/gpio-mvebu.c

@@ -117,7 +117,7 @@ static inline void __iomem *mvebu_gpioreg_edge_cause(struct mvebu_gpio_chip *mvc
 {
 	int cpu;
 
-	switch(mvchip->soc_variant) {
+	switch (mvchip->soc_variant) {
 	case MVEBU_GPIO_SOC_VARIANT_ORION:
 	case MVEBU_GPIO_SOC_VARIANT_MV78200:
 		return mvchip->membase + GPIO_EDGE_CAUSE_OFF;
@@ -133,7 +133,7 @@ static inline void __iomem *mvebu_gpioreg_edge_mask(struct mvebu_gpio_chip *mvch
 {
 	int cpu;
 
-	switch(mvchip->soc_variant) {
+	switch (mvchip->soc_variant) {
 	case MVEBU_GPIO_SOC_VARIANT_ORION:
 		return mvchip->membase + GPIO_EDGE_MASK_OFF;
 	case MVEBU_GPIO_SOC_VARIANT_MV78200:
@@ -151,7 +151,7 @@ static void __iomem *mvebu_gpioreg_level_mask(struct mvebu_gpio_chip *mvchip)
 {
 	int cpu;
 
-	switch(mvchip->soc_variant) {
+	switch (mvchip->soc_variant) {
 	case MVEBU_GPIO_SOC_VARIANT_ORION:
 		return mvchip->membase + GPIO_LEVEL_MASK_OFF;
 	case MVEBU_GPIO_SOC_VARIANT_MV78200:
@@ -401,7 +401,7 @@ static int mvebu_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 	/*
 	 * Configure interrupt polarity.
 	 */
-	switch(type) {
+	switch (type) {
 	case IRQ_TYPE_EDGE_RISING:
 	case IRQ_TYPE_LEVEL_HIGH:
 		u = readl_relaxed(mvebu_gpioreg_in_pol(mvchip));
@@ -470,18 +470,76 @@ static void mvebu_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	}
 }
 
+#ifdef CONFIG_DEBUG_FS
+#include <linux/seq_file.h>
+
+static void mvebu_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	struct mvebu_gpio_chip *mvchip =
+		container_of(chip, struct mvebu_gpio_chip, chip);
+	u32 out, io_conf, blink, in_pol, data_in, cause, edg_msk, lvl_msk;
+	int i;
+
+	out	= readl_relaxed(mvebu_gpioreg_out(mvchip));
+	io_conf	= readl_relaxed(mvebu_gpioreg_io_conf(mvchip));
+	blink	= readl_relaxed(mvebu_gpioreg_blink(mvchip));
+	in_pol	= readl_relaxed(mvebu_gpioreg_in_pol(mvchip));
+	data_in	= readl_relaxed(mvebu_gpioreg_data_in(mvchip));
+	cause	= readl_relaxed(mvebu_gpioreg_edge_cause(mvchip));
+	edg_msk	= readl_relaxed(mvebu_gpioreg_edge_mask(mvchip));
+	lvl_msk	= readl_relaxed(mvebu_gpioreg_level_mask(mvchip));
+
+	for (i = 0; i < chip->ngpio; i++) {
+		const char *label;
+		u32 msk;
+		bool is_out;
+
+		label = gpiochip_is_requested(chip, i);
+		if (!label)
+			continue;
+
+		msk = 1 << i;
+		is_out = !(io_conf & msk);
+
+		seq_printf(s, " gpio-%-3d (%-20.20s)", chip->base + i, label);
+
+		if (is_out) {
+			seq_printf(s, " out %s %s\n",
+				   out & msk ? "hi" : "lo",
+				   blink & msk ? "(blink )" : "");
+			continue;
+		}
+
+		seq_printf(s, " in  %s (act %s) - IRQ",
+			   (data_in ^ in_pol) & msk  ? "hi" : "lo",
+			   in_pol & msk ? "lo" : "hi");
+		if (!((edg_msk | lvl_msk) & msk)) {
+			seq_printf(s, " disabled\n");
+			continue;
+		}
+		if (edg_msk & msk)
+			seq_printf(s, " edge ");
+		if (lvl_msk & msk)
+			seq_printf(s, " level");
+		seq_printf(s, " (%s)\n", cause & msk ? "pending" : "clear  ");
+	}
+}
+#else
+#define mvebu_gpio_dbg_show NULL
+#endif
+
 static struct of_device_id mvebu_gpio_of_match[] = {
 	{
 		.compatible = "marvell,orion-gpio",
-		.data       = (void*) MVEBU_GPIO_SOC_VARIANT_ORION,
+		.data       = (void *) MVEBU_GPIO_SOC_VARIANT_ORION,
 	},
 	{
 		.compatible = "marvell,mv78200-gpio",
-		.data       = (void*) MVEBU_GPIO_SOC_VARIANT_MV78200,
+		.data       = (void *) MVEBU_GPIO_SOC_VARIANT_MV78200,
 	},
 	{
 		.compatible = "marvell,armadaxp-gpio",
-		.data       = (void*) MVEBU_GPIO_SOC_VARIANT_ARMADAXP,
+		.data       = (void *) MVEBU_GPIO_SOC_VARIANT_ARMADAXP,
 	},
 	{
 		/* sentinel */
@@ -509,13 +567,13 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
 		soc_variant = MVEBU_GPIO_SOC_VARIANT_ORION;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (! res) {
+	if (!res) {
 		dev_err(&pdev->dev, "Cannot get memory resource\n");
 		return -ENODEV;
 	}
 
 	mvchip = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_gpio_chip), GFP_KERNEL);
-	if (! mvchip){
+	if (!mvchip) {
 		dev_err(&pdev->dev, "Cannot allocate memory\n");
 		return -ENOMEM;
 	}
@@ -550,6 +608,7 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
 	mvchip->chip.ngpio = ngpios;
 	mvchip->chip.can_sleep = 0;
 	mvchip->chip.of_node = np;
+	mvchip->chip.dbg_show = mvebu_gpio_dbg_show;
 
 	spin_lock_init(&mvchip->lock);
 	mvchip->membase = devm_ioremap_resource(&pdev->dev, res);
@@ -560,21 +619,21 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
 	 * per-CPU registers */
 	if (soc_variant == MVEBU_GPIO_SOC_VARIANT_ARMADAXP) {
 		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-		if (! res) {
+		if (!res) {
 			dev_err(&pdev->dev, "Cannot get memory resource\n");
 			return -ENODEV;
 		}
 
 		mvchip->percpu_membase = devm_ioremap_resource(&pdev->dev,
 							       res);
-		if (IS_ERR(mvchip->percpu_membase)) 
+		if (IS_ERR(mvchip->percpu_membase))
 			return PTR_ERR(mvchip->percpu_membase);
 	}
 
 	/*
 	 * Mask and clear GPIO interrupts.
 	 */
-	switch(soc_variant) {
+	switch (soc_variant) {
 	case MVEBU_GPIO_SOC_VARIANT_ORION:
 		writel_relaxed(0, mvchip->membase + GPIO_EDGE_CAUSE_OFF);
 		writel_relaxed(0, mvchip->membase + GPIO_EDGE_MASK_OFF);
@@ -632,7 +691,7 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
 
 	gc = irq_alloc_generic_chip("mvebu_gpio_irq", 2, mvchip->irqbase,
 				    mvchip->membase, handle_level_irq);
-	if (! gc) {
+	if (!gc) {
 		dev_err(&pdev->dev, "Cannot allocate generic irq_chip\n");
 		return -ENOMEM;
 	}

drivers/gpio/gpio-omap.c

@@ -52,7 +52,6 @@ struct gpio_bank {
 	struct list_head node;
 	void __iomem *base;
 	u16 irq;
-	int irq_base;
 	struct irq_domain *domain;
 	u32 non_wakeup_gpios;
 	u32 enabled_non_wakeup_gpios;
@@ -88,7 +87,14 @@ struct gpio_bank {
 
 static int irq_to_gpio(struct gpio_bank *bank, unsigned int gpio_irq)
 {
-	return gpio_irq - bank->irq_base + bank->chip.base;
+	return bank->chip.base + gpio_irq;
+}
+
+static int omap_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
+
+	return irq_find_mapping(bank->domain, offset);
 }
 
 static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
@@ -420,13 +426,16 @@ static int gpio_irq_type(struct irq_data *d, unsigned type)
 	int retval;
 	unsigned long flags;
 
+	if (WARN_ON(!bank->mod_usage))
+		return -EINVAL;
+
 #ifdef CONFIG_ARCH_OMAP1
 	if (d->irq > IH_MPUIO_BASE)
 		gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
 #endif
 
 	if (!gpio)
-		gpio = irq_to_gpio(bank, d->irq);
+		gpio = irq_to_gpio(bank, d->hwirq);
 
 	if (type & ~IRQ_TYPE_SENSE_MASK)
 		return -EINVAL;
@@ -579,7 +588,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio)
 static int gpio_wake_enable(struct irq_data *d, unsigned int enable)
 {
 	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-	unsigned int gpio = irq_to_gpio(bank, d->irq);
+	unsigned int gpio = irq_to_gpio(bank, d->hwirq);
 
 	return _set_gpio_wakeup(bank, gpio, enable);
 }
@@ -679,7 +688,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	void __iomem *isr_reg = NULL;
 	u32 isr;
-	unsigned int gpio_irq, gpio_index;
+	unsigned int bit;
 	struct gpio_bank *bank;
 	int unmasked = 0;
 	struct irq_chip *chip = irq_desc_get_chip(desc);
@@ -693,7 +702,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	if (WARN_ON(!isr_reg))
 		goto exit;
 
-	while(1) {
+	while (1) {
 		u32 isr_saved, level_mask = 0;
 		u32 enabled;
 
@@ -720,14 +729,9 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 		if (!isr)
 			break;
 
-		gpio_irq = bank->irq_base;
-		for (; isr != 0; isr >>= 1, gpio_irq++) {
-			int gpio = irq_to_gpio(bank, gpio_irq);
-
-			if (!(isr & 1))
-				continue;
-
-			gpio_index = GPIO_INDEX(bank, gpio);
+		while (isr) {
+			bit = __ffs(isr);
+			isr &= ~(1 << bit);
 
 			/*
 			 * Some chips can't respond to both rising and falling
@@ -736,10 +740,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 			 * to respond to the IRQ for the opposite direction.
 			 * This will be indicated in the bank toggle_mask.
 			 */
-			if (bank->toggle_mask & (1 << gpio_index))
-				_toggle_gpio_edge_triggering(bank, gpio_index);
+			if (bank->toggle_mask & (1 << bit))
+				_toggle_gpio_edge_triggering(bank, bit);
 
-			generic_handle_irq(gpio_irq);
+			generic_handle_irq(irq_find_mapping(bank->domain, bit));
 		}
 	}
 	/* if bank has any level sensitive GPIO pin interrupt
@@ -755,7 +759,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 static void gpio_irq_shutdown(struct irq_data *d)
 {
 	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-	unsigned int gpio = irq_to_gpio(bank, d->irq);
+	unsigned int gpio = irq_to_gpio(bank, d->hwirq);
 	unsigned long flags;
 
 	spin_lock_irqsave(&bank->lock, flags);
@@ -766,7 +770,7 @@ static void gpio_irq_shutdown(struct irq_data *d)
 static void gpio_ack_irq(struct irq_data *d)
 {
 	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-	unsigned int gpio = irq_to_gpio(bank, d->irq);
+	unsigned int gpio = irq_to_gpio(bank, d->hwirq);
 
 	_clear_gpio_irqstatus(bank, gpio);
 }
@@ -774,7 +778,7 @@ static void gpio_ack_irq(struct irq_data *d)
 static void gpio_mask_irq(struct irq_data *d)
 {
 	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-	unsigned int gpio = irq_to_gpio(bank, d->irq);
+	unsigned int gpio = irq_to_gpio(bank, d->hwirq);
 	unsigned long flags;
 
 	spin_lock_irqsave(&bank->lock, flags);
@@ -786,7 +790,7 @@ static void gpio_mask_irq(struct irq_data *d)
 static void gpio_unmask_irq(struct irq_data *d)
 {
 	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-	unsigned int gpio = irq_to_gpio(bank, d->irq);
+	unsigned int gpio = irq_to_gpio(bank, d->hwirq);
 	unsigned int irq_mask = GPIO_BIT(bank, gpio);
 	u32 trigger = irqd_get_trigger_type(d);
 	unsigned long flags;
@@ -952,14 +956,6 @@ static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	spin_unlock_irqrestore(&bank->lock, flags);
 }
 
-static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
-{
-	struct gpio_bank *bank;
-
-	bank = container_of(chip, struct gpio_bank, chip);
-	return bank->irq_base + offset;
-}
-
 /*---------------------------------------------------------------------*/
 
 static void __init omap_gpio_show_rev(struct gpio_bank *bank)
@@ -1056,7 +1052,7 @@ static void omap_gpio_chip_init(struct gpio_bank *bank)
 	bank->chip.direction_output = gpio_output;
 	bank->chip.set_debounce = gpio_debounce;
 	bank->chip.set = gpio_set;
-	bank->chip.to_irq = gpio_2irq;
+	bank->chip.to_irq = omap_gpio_to_irq;
 	if (bank->is_mpuio) {
 		bank->chip.label = "mpuio";
 		if (bank->regs->wkup_en)
@@ -1071,15 +1067,16 @@ static void omap_gpio_chip_init(struct gpio_bank *bank)
 
 	gpiochip_add(&bank->chip);
 
-	for (j = bank->irq_base; j < bank->irq_base + bank->width; j++) {
-		irq_set_lockdep_class(j, &gpio_lock_class);
-		irq_set_chip_data(j, bank);
+	for (j = 0; j < bank->width; j++) {
+		int irq = irq_create_mapping(bank->domain, j);
+		irq_set_lockdep_class(irq, &gpio_lock_class);
+		irq_set_chip_data(irq, bank);
 		if (bank->is_mpuio) {
-			omap_mpuio_alloc_gc(bank, j, bank->width);
+			omap_mpuio_alloc_gc(bank, irq, bank->width);
 		} else {
-			irq_set_chip(j, &gpio_irq_chip);
-			irq_set_handler(j, handle_simple_irq);
-			set_irq_flags(j, IRQF_VALID);
+			irq_set_chip_and_handler(irq, &gpio_irq_chip,
+						 handle_simple_irq);
+			set_irq_flags(irq, IRQF_VALID);
 		}
 	}
 	irq_set_chained_handler(bank->irq, gpio_irq_handler);
@@ -1096,7 +1093,6 @@ static int omap_gpio_probe(struct platform_device *pdev)
 	const struct omap_gpio_platform_data *pdata;
 	struct resource *res;
 	struct gpio_bank *bank;
-	int ret = 0;
 
 	match = of_match_device(of_match_ptr(omap_gpio_match), dev);
 
@@ -1123,20 +1119,22 @@ static int omap_gpio_probe(struct platform_device *pdev)
 	bank->width = pdata->bank_width;
 	bank->is_mpuio = pdata->is_mpuio;
 	bank->non_wakeup_gpios = pdata->non_wakeup_gpios;
-	bank->loses_context = pdata->loses_context;
 	bank->regs = pdata->regs;
 #ifdef CONFIG_OF_GPIO
 	bank->chip.of_node = of_node_get(node);
 #endif
-
-	bank->irq_base = irq_alloc_descs(-1, 0, bank->width, 0);
-	if (bank->irq_base < 0) {
-		dev_err(dev, "Couldn't allocate IRQ numbers\n");
-		return -ENODEV;
+	if (node) {
+		if (!of_property_read_bool(node, "ti,gpio-always-on"))
+			bank->loses_context = true;
+	} else {
+		bank->loses_context = pdata->loses_context;
 	}
 
-	bank->domain = irq_domain_add_legacy(node, bank->width, bank->irq_base,
-					     0, &irq_domain_simple_ops, NULL);
+
+	bank->domain = irq_domain_add_linear(node, bank->width,
+					     &irq_domain_simple_ops, NULL);
+	if (!bank->domain)
+		return -ENODEV;
 
 	if (bank->regs->set_dataout && bank->regs->clr_dataout)
 		bank->set_dataout = _set_gpio_dataout_reg;
@@ -1149,18 +1147,21 @@ static int omap_gpio_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (unlikely(!res)) {
 		dev_err(dev, "Invalid mem resource\n");
+		irq_domain_remove(bank->domain);
 		return -ENODEV;
 	}
 
 	if (!devm_request_mem_region(dev, res->start, resource_size(res),
 				     pdev->name)) {
 		dev_err(dev, "Region already claimed\n");
+		irq_domain_remove(bank->domain);
 		return -EBUSY;
 	}
 
 	bank->base = devm_ioremap(dev, res->start, resource_size(res));
 	if (!bank->base) {
 		dev_err(dev, "Could not ioremap\n");
+		irq_domain_remove(bank->domain);
 		return -ENOMEM;
 	}
 
@@ -1184,7 +1185,7 @@ static int omap_gpio_probe(struct platform_device *pdev)
 
 	list_add_tail(&bank->node, &omap_gpio_list);
 
-	return ret;
+	return 0;
 }
 
 #ifdef CONFIG_ARCH_OMAP2PLUS
@@ -1262,9 +1263,9 @@ static int omap_gpio_runtime_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct gpio_bank *bank = platform_get_drvdata(pdev);
-	int context_lost_cnt_after;
 	u32 l = 0, gen, gen0, gen1;
 	unsigned long flags;
+	int c;
 
 	spin_lock_irqsave(&bank->lock, flags);
 	_gpio_dbck_enable(bank);
@@ -1280,14 +1281,17 @@ static int omap_gpio_runtime_resume(struct device *dev)
 	__raw_writel(bank->context.risingdetect,
 		     bank->base + bank->regs->risingdetect);
 
-	if (bank->get_context_loss_count) {
-		context_lost_cnt_after =
-			bank->get_context_loss_count(bank->dev);
-		if (context_lost_cnt_after != bank->context_loss_count) {
+	if (bank->loses_context) {
+		if (!bank->get_context_loss_count) {
 			omap_gpio_restore_context(bank);
 		} else {
-			spin_unlock_irqrestore(&bank->lock, flags);
-			return 0;
+			c = bank->get_context_loss_count(bank->dev);
+			if (c != bank->context_loss_count) {
+				omap_gpio_restore_context(bank);
+			} else {
+				spin_unlock_irqrestore(&bank->lock, flags);
+				return 0;
+			}
 		}
 	}
 
@@ -1296,10 +1300,6 @@ static int omap_gpio_runtime_resume(struct device *dev)
 		return 0;
 	}
 
-	__raw_writel(bank->context.fallingdetect,
-			bank->base + bank->regs->fallingdetect);
-	__raw_writel(bank->context.risingdetect,
-			bank->base + bank->regs->risingdetect);
 	l = __raw_readl(bank->base + bank->regs->datain);
 
 	/*

drivers/gpio/gpio-pca953x.c

@@ -146,8 +146,7 @@ static int pca953x_write_regs(struct pca953x_chip *chip, int reg, u8 *val)
 		ret = i2c_smbus_write_i2c_block_data(chip->client,
 					(reg << bank_shift) | REG_ADDR_AI,
 					NBANK(chip), val);
-	}
-	else {
+	} else {
 		switch (chip->chip_type) {
 		case PCA953X_TYPE:
 			ret = i2c_smbus_write_word_data(chip->client,

drivers/gpio/gpio-pcf857x.c

@@ -45,6 +45,7 @@ static const struct i2c_device_id pcf857x_id[] = {
 	{ "pca9675", 16 },
 	{ "max7328", 8 },
 	{ "max7329", 8 },
+	{ "tca9554", 8 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, pcf857x_id);
@@ -267,7 +268,7 @@ static int pcf857x_probe(struct i2c_client *client,
 	}
 
 	/* Allocate, initialize, and register this gpio_chip. */
-	gpio = kzalloc(sizeof *gpio, GFP_KERNEL);
+	gpio = devm_kzalloc(&client->dev, sizeof(*gpio), GFP_KERNEL);
 	if (!gpio)
 		return -ENOMEM;
 
@@ -390,7 +391,6 @@ static int pcf857x_probe(struct i2c_client *client,
 	if (pdata && client->irq)
 		pcf857x_irq_domain_cleanup(gpio);
 
-	kfree(gpio);
 	return status;
 }
 
@@ -415,9 +415,7 @@ static int pcf857x_remove(struct i2c_client *client)
 		pcf857x_irq_domain_cleanup(gpio);
 
 	status = gpiochip_remove(&gpio->chip);
-	if (status == 0)
-		kfree(gpio);
-	else
+	if (status)
 		dev_err(&client->dev, "%s --> %d\n", "remove", status);
 	return status;
 }

drivers/gpio/gpio-pxa.c

@@ -628,7 +628,7 @@ static int pxa_gpio_probe(struct platform_device *pdev)
 	for_each_gpio_chip(gpio, c) {
 		writel_relaxed(0, c->regbase + GFER_OFFSET);
 		writel_relaxed(0, c->regbase + GRER_OFFSET);
-		writel_relaxed(~0,c->regbase + GEDR_OFFSET);
+		writel_relaxed(~0, c->regbase + GEDR_OFFSET);
 		/* unmask GPIO edge detect for AP side */
 		if (gpio_is_mmp_type(gpio_type))
 			writel_relaxed(~0, c->regbase + ED_MASK_OFFSET);
@@ -712,7 +712,7 @@ static void pxa_gpio_resume(void)
 
 	for_each_gpio_chip(gpio, c) {
 		/* restore level with set/clear */
-		writel_relaxed( c->saved_gplr, c->regbase + GPSR_OFFSET);
+		writel_relaxed(c->saved_gplr, c->regbase + GPSR_OFFSET);
 		writel_relaxed(~c->saved_gplr, c->regbase + GPCR_OFFSET);
 
 		writel_relaxed(c->saved_grer, c->regbase + GRER_OFFSET);

drivers/gpio/gpio-samsung.c

@@ -3030,6 +3030,7 @@ static __init int samsung_gpiolib_init(void)
 		{ .compatible = "samsung,exynos4x12-pinctrl", },
 		{ .compatible = "samsung,exynos5250-pinctrl", },
 		{ .compatible = "samsung,exynos5440-pinctrl", },
+		{ }
 	};
 	for_each_matching_node(pctrl_np, exynos_pinctrl_ids)
 		if (pctrl_np && of_device_is_available(pctrl_np))

drivers/gpio/gpio-sch.c

@@ -125,13 +125,17 @@ static int sch_gpio_resume_direction_in(struct gpio_chip *gc,
 					unsigned gpio_num)
 {
 	u8 curr_dirs;
+	unsigned short offset, bit;
 
 	spin_lock(&gpio_lock);
 
-	curr_dirs = inb(gpio_ba + RGIO);
+	offset = RGIO + gpio_num / 8;
+	bit = gpio_num % 8;
+
+	curr_dirs = inb(gpio_ba + offset);
 
-	if (!(curr_dirs & (1 << gpio_num)))
-		outb(curr_dirs | (1 << gpio_num) , gpio_ba + RGIO);
+	if (!(curr_dirs & (1 << bit)))
+		outb(curr_dirs | (1 << bit), gpio_ba + offset);
 
 	spin_unlock(&gpio_lock);
 	return 0;
@@ -139,22 +143,31 @@ static int sch_gpio_resume_direction_in(struct gpio_chip *gc,
 
 static int sch_gpio_resume_get(struct gpio_chip *gc, unsigned gpio_num)
 {
-	return !!(inb(gpio_ba + RGLV) & (1 << gpio_num));
+	unsigned short offset, bit;
+
+	offset = RGLV + gpio_num / 8;
+	bit = gpio_num % 8;
+
+	return !!(inb(gpio_ba + offset) & (1 << bit));
 }
 
 static void sch_gpio_resume_set(struct gpio_chip *gc,
 				unsigned gpio_num, int val)
 {
 	u8 curr_vals;
+	unsigned short offset, bit;
 
 	spin_lock(&gpio_lock);
 
-	curr_vals = inb(gpio_ba + RGLV);
+	offset = RGLV + gpio_num / 8;
+	bit = gpio_num % 8;
+
+	curr_vals = inb(gpio_ba + offset);
 
 	if (val)
-		outb(curr_vals | (1 << gpio_num), gpio_ba + RGLV);
+		outb(curr_vals | (1 << bit), gpio_ba + offset);
 	else
-		outb((curr_vals & ~(1 << gpio_num)), gpio_ba + RGLV);
+		outb((curr_vals & ~(1 << bit)), gpio_ba + offset);
 
 	spin_unlock(&gpio_lock);
 }
@@ -163,14 +176,18 @@ static int sch_gpio_resume_direction_out(struct gpio_chip *gc,
 					unsigned gpio_num, int val)
 {
 	u8 curr_dirs;
+	unsigned short offset, bit;
 
 	sch_gpio_resume_set(gc, gpio_num, val);
 
+	offset = RGIO + gpio_num / 8;
+	bit = gpio_num % 8;
+
 	spin_lock(&gpio_lock);
 
-	curr_dirs = inb(gpio_ba + RGIO);
-	if (curr_dirs & (1 << gpio_num))
-		outb(curr_dirs & ~(1 << gpio_num), gpio_ba + RGIO);
+	curr_dirs = inb(gpio_ba + offset);
+	if (curr_dirs & (1 << bit))
+		outb(curr_dirs & ~(1 << bit), gpio_ba + offset);
 
 	spin_unlock(&gpio_lock);
 	return 0;
@@ -204,45 +221,41 @@ static int sch_gpio_probe(struct platform_device *pdev)
 	gpio_ba = res->start;
 
 	switch (id) {
-		case PCI_DEVICE_ID_INTEL_SCH_LPC:
-			sch_gpio_core.base = 0;
-			sch_gpio_core.ngpio = 10;
-
-			sch_gpio_resume.base = 10;
-			sch_gpio_resume.ngpio = 4;
-
-			/*
-			 * GPIO[6:0] enabled by default
-			 * GPIO7 is configured by the CMC as SLPIOVR
-			 * Enable GPIO[9:8] core powered gpios explicitly
-			 */
-			outb(0x3, gpio_ba + CGEN + 1);
-			/*
-			 * SUS_GPIO[2:0] enabled by default
-			 * Enable SUS_GPIO3 resume powered gpio explicitly
-			 */
-			outb(0x8, gpio_ba + RGEN);
-			break;
-
-		case PCI_DEVICE_ID_INTEL_ITC_LPC:
-			sch_gpio_core.base = 0;
-			sch_gpio_core.ngpio = 5;
-
-			sch_gpio_resume.base = 5;
-			sch_gpio_resume.ngpio = 9;
-			break;
-
-		case PCI_DEVICE_ID_INTEL_CENTERTON_ILB:
-			sch_gpio_core.base = 0;
-			sch_gpio_core.ngpio = 21;
-
-			sch_gpio_resume.base = 21;
-			sch_gpio_resume.ngpio = 9;
-			break;
-
-		default:
-			err = -ENODEV;
-			goto err_sch_gpio_core;
+	case PCI_DEVICE_ID_INTEL_SCH_LPC:
+		sch_gpio_core.base = 0;
+		sch_gpio_core.ngpio = 10;
+		sch_gpio_resume.base = 10;
+		sch_gpio_resume.ngpio = 4;
+		/*
+		 * GPIO[6:0] enabled by default
+		 * GPIO7 is configured by the CMC as SLPIOVR
+		 * Enable GPIO[9:8] core powered gpios explicitly
+		 */
+		outb(0x3, gpio_ba + CGEN + 1);
+		/*
+		 * SUS_GPIO[2:0] enabled by default
+		 * Enable SUS_GPIO3 resume powered gpio explicitly
+		 */
+		outb(0x8, gpio_ba + RGEN);
+		break;
+
+	case PCI_DEVICE_ID_INTEL_ITC_LPC:
+		sch_gpio_core.base = 0;
+		sch_gpio_core.ngpio = 5;
+		sch_gpio_resume.base = 5;
+		sch_gpio_resume.ngpio = 9;
+		break;
+
+	case PCI_DEVICE_ID_INTEL_CENTERTON_ILB:
+		sch_gpio_core.base = 0;
+		sch_gpio_core.ngpio = 21;
+		sch_gpio_resume.base = 21;
+		sch_gpio_resume.ngpio = 9;
+		break;
+
+	default:
+		err = -ENODEV;
+		goto err_sch_gpio_core;
 	}
 
 	sch_gpio_core.dev = &pdev->dev;

drivers/gpio/gpio-stp-xway.c

@@ -217,7 +217,7 @@ static int xway_stp_probe(struct platform_device *pdev)
 	chip->virt = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(chip->virt))
 		return PTR_ERR(chip->virt);
-	
+
 	chip->gc.dev = &pdev->dev;
 	chip->gc.label = "stp-xway";
 	chip->gc.direction_output = xway_stp_dir_out;

drivers/gpio/gpio-tc3589x.c

@@ -282,9 +282,9 @@ static void tc3589x_gpio_irq_unmap(struct irq_domain *d, unsigned int virq)
 }
 
 static struct irq_domain_ops tc3589x_irq_ops = {
-        .map    = tc3589x_gpio_irq_map,
-        .unmap  = tc3589x_gpio_irq_unmap,
-        .xlate  = irq_domain_xlate_twocell,
+	.map    = tc3589x_gpio_irq_map,
+	.unmap  = tc3589x_gpio_irq_unmap,
+	.xlate  = irq_domain_xlate_twocell,
 };
 
 static int tc3589x_gpio_irq_init(struct tc3589x_gpio *tc3589x_gpio,
@@ -344,7 +344,7 @@ static int tc3589x_gpio_probe(struct platform_device *pdev)
 	tc3589x_gpio->chip.base = (pdata) ? pdata->gpio_base : -1;
 
 #ifdef CONFIG_OF_GPIO
-        tc3589x_gpio->chip.of_node = np;
+	tc3589x_gpio->chip.of_node = np;
 #endif
 
 	tc3589x_gpio->irq_base = tc3589x->irq_base ?

drivers/gpio/gpio-tegra.c

@@ -414,10 +414,11 @@ static int tegra_gpio_probe(struct platform_device *pdev)
 	int j;
 
 	match = of_match_device(tegra_gpio_of_match, &pdev->dev);
-	if (match)
-		config = (struct tegra_gpio_soc_config *)match->data;
-	else
-		config = &tegra20_gpio_config;
+	if (!match) {
+		dev_err(&pdev->dev, "Error: No device match found\n");
+		return -ENODEV;
+	}
+	config = (struct tegra_gpio_soc_config *)match->data;
 
 	tegra_gpio_bank_stride = config->bank_stride;
 	tegra_gpio_upper_offset = config->upper_offset;
@@ -478,9 +479,7 @@ static int tegra_gpio_probe(struct platform_device *pdev)
 		}
 	}
 
-#ifdef CONFIG_OF_GPIO
 	tegra_gpio_chip.of_node = pdev->dev.of_node;
-#endif
 
 	gpiochip_add(&tegra_gpio_chip);
 

drivers/gpio/gpio-timberdale.c

@@ -167,8 +167,7 @@ static int timbgpio_irq_type(struct irq_data *d, unsigned trigger)
 		if (ver < 3) {
 			ret = -EINVAL;
 			goto out;
-		}
-		else {
+		} else {
 			flr |= 1 << offset;
 			bflr |= 1 << offset;
 		}

drivers/gpio/gpio-tps65910.c

@@ -133,7 +133,7 @@ static int tps65910_gpio_probe(struct platform_device *pdev)
 	tps65910_gpio->gpio_chip.owner = THIS_MODULE;
 	tps65910_gpio->gpio_chip.label = tps65910->i2c_client->name;
 
-	switch(tps65910_chip_id(tps65910)) {
+	switch (tps65910_chip_id(tps65910)) {
 	case TPS65910:
 		tps65910_gpio->gpio_chip.ngpio = TPS65910_NUM_GPIO;
 		break;

drivers/gpio/gpio-viperboard.c

@@ -380,10 +380,6 @@ static int vprbrd_gpiob_direction_output(struct gpio_chip *chip,
 	struct vprbrd *vb = gpio->vb;
 
 	gpio->gpiob_out |= (1 << offset);
-	if (value)
-		gpio->gpiob_val |= (1 << offset);
-	else
-		gpio->gpiob_val &= ~(1 << offset);
 
 	mutex_lock(&vb->lock);
 

drivers/gpio/gpiolib-acpi.c

@@ -17,6 +17,13 @@
 #include <linux/acpi.h>
 #include <linux/interrupt.h>
 
+struct acpi_gpio_evt_pin {
+	struct list_head node;
+	acpi_handle *evt_handle;
+	unsigned int pin;
+	unsigned int irq;
+};
+
 static int acpi_gpiochip_find(struct gpio_chip *gc, void *data)
 {
 	if (!gc->dev)
@@ -54,7 +61,6 @@ int acpi_get_gpio(char *path, int pin)
 }
 EXPORT_SYMBOL_GPL(acpi_get_gpio);
 
-
 static irqreturn_t acpi_gpio_irq_handler(int irq, void *data)
 {
 	acpi_handle handle = data;
@@ -64,6 +70,27 @@ static irqreturn_t acpi_gpio_irq_handler(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t acpi_gpio_irq_handler_evt(int irq, void *data)
+{
+	struct acpi_gpio_evt_pin *evt_pin = data;
+	struct acpi_object_list args;
+	union acpi_object arg;
+
+	arg.type = ACPI_TYPE_INTEGER;
+	arg.integer.value = evt_pin->pin;
+	args.count = 1;
+	args.pointer = &arg;
+
+	acpi_evaluate_object(evt_pin->evt_handle, NULL, &args, NULL);
+
+	return IRQ_HANDLED;
+}
+
+static void acpi_gpio_evt_dh(acpi_handle handle, void *data)
+{
+	/* The address of this function is used as a key. */
+}
+
 /**
  * acpi_gpiochip_request_interrupts() - Register isr for gpio chip ACPI events
  * @chip:      gpio chip
@@ -73,15 +100,13 @@ static irqreturn_t acpi_gpio_irq_handler(int irq, void *data)
  * chip's interrupt handler. acpi_gpiochip_request_interrupts finds out which
  * gpio pins have acpi event methods and assigns interrupt handlers that calls
  * the acpi event methods for those pins.
- *
- * Interrupts are automatically freed on driver detach
  */
-
 void acpi_gpiochip_request_interrupts(struct gpio_chip *chip)
 {
 	struct acpi_buffer buf = {ACPI_ALLOCATE_BUFFER, NULL};
 	struct acpi_resource *res;
-	acpi_handle handle, ev_handle;
+	acpi_handle handle, evt_handle;
+	struct list_head *evt_pins = NULL;
 	acpi_status status;
 	unsigned int pin;
 	int irq, ret;
@@ -98,13 +123,30 @@ void acpi_gpiochip_request_interrupts(struct gpio_chip *chip)
 	if (ACPI_FAILURE(status))
 		return;
 
-	/* If a gpio interrupt has an acpi event handler method, then
-	 * set up an interrupt handler that calls the acpi event handler
-	 */
+	status = acpi_get_handle(handle, "_EVT", &evt_handle);
+	if (ACPI_SUCCESS(status)) {
+		evt_pins = kzalloc(sizeof(*evt_pins), GFP_KERNEL);
+		if (evt_pins) {
+			INIT_LIST_HEAD(evt_pins);
+			status = acpi_attach_data(handle, acpi_gpio_evt_dh,
+						  evt_pins);
+			if (ACPI_FAILURE(status)) {
+				kfree(evt_pins);
+				evt_pins = NULL;
+			}
+		}
+	}
 
+	/*
+	 * If a GPIO interrupt has an ACPI event handler method, or _EVT is
+	 * present, set up an interrupt handler that calls the ACPI event
+	 * handler.
+	 */
 	for (res = buf.pointer;
 	     res && (res->type != ACPI_RESOURCE_TYPE_END_TAG);
 	     res = ACPI_NEXT_RESOURCE(res)) {
+		irq_handler_t handler = NULL;
+		void *data;
 
 		if (res->type != ACPI_RESOURCE_TYPE_GPIO ||
 		    res->data.gpio.connection_type !=
@@ -115,23 +157,42 @@ void acpi_gpiochip_request_interrupts(struct gpio_chip *chip)
 		if (pin > chip->ngpio)
 			continue;
 
-		sprintf(ev_name, "_%c%02X",
-		res->data.gpio.triggering ? 'E' : 'L', pin);
-
-		status = acpi_get_handle(handle, ev_name, &ev_handle);
-		if (ACPI_FAILURE(status))
-			continue;
-
 		irq = chip->to_irq(chip, pin);
 		if (irq < 0)
 			continue;
 
+		if (pin <= 255) {
+			acpi_handle ev_handle;
+
+			sprintf(ev_name, "_%c%02X",
+				res->data.gpio.triggering ? 'E' : 'L', pin);
+			status = acpi_get_handle(handle, ev_name, &ev_handle);
+			if (ACPI_SUCCESS(status)) {
+				handler = acpi_gpio_irq_handler;
+				data = ev_handle;
+			}
+		}
+		if (!handler && evt_pins) {
+			struct acpi_gpio_evt_pin *evt_pin;
+
+			evt_pin = kzalloc(sizeof(*evt_pin), GFP_KERNEL);
+			if (!evt_pin)
+				continue;
+
+			list_add_tail(&evt_pin->node, evt_pins);
+			evt_pin->evt_handle = evt_handle;
+			evt_pin->pin = pin;
+			evt_pin->irq = irq;
+			handler = acpi_gpio_irq_handler_evt;
+			data = evt_pin;
+		}
+		if (!handler)
+			continue;
+
 		/* Assume BIOS sets the triggering, so no flags */
-		ret = devm_request_threaded_irq(chip->dev, irq, NULL,
-					  acpi_gpio_irq_handler,
-					  0,
-					  "GPIO-signaled-ACPI-event",
-					  ev_handle);
+		ret = devm_request_threaded_irq(chip->dev, irq, NULL, handler,
+						0, "GPIO-signaled-ACPI-event",
+						data);
 		if (ret)
 			dev_err(chip->dev,
 				"Failed to request IRQ %d ACPI event handler\n",
@@ -139,3 +200,119 @@ void acpi_gpiochip_request_interrupts(struct gpio_chip *chip)
 	}
 }
 EXPORT_SYMBOL(acpi_gpiochip_request_interrupts);
+
+struct acpi_gpio_lookup {
+	struct acpi_gpio_info info;
+	int index;
+	int gpio;
+	int n;
+};
+
+static int acpi_find_gpio(struct acpi_resource *ares, void *data)
+{
+	struct acpi_gpio_lookup *lookup = data;
+
+	if (ares->type != ACPI_RESOURCE_TYPE_GPIO)
+		return 1;
+
+	if (lookup->n++ == lookup->index && lookup->gpio < 0) {
+		const struct acpi_resource_gpio *agpio = &ares->data.gpio;
+
+		lookup->gpio = acpi_get_gpio(agpio->resource_source.string_ptr,
+					     agpio->pin_table[0]);
+		lookup->info.gpioint =
+			agpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT;
+	}
+
+	return 1;
+}
+
+/**
+ * acpi_get_gpio_by_index() - get a GPIO number from device resources
+ * @dev: pointer to a device to get GPIO from
+ * @index: index of GpioIo/GpioInt resource (starting from %0)
+ * @info: info pointer to fill in (optional)
+ *
+ * Function goes through ACPI resources for @dev and based on @index looks
+ * up a GpioIo/GpioInt resource, translates it to the Linux GPIO number,
+ * and returns it. @index matches GpioIo/GpioInt resources only so if there
+ * are total %3 GPIO resources, the index goes from %0 to %2.
+ *
+ * If the GPIO cannot be translated or there is an error, negative errno is
+ * returned.
+ *
+ * Note: if the GPIO resource has multiple entries in the pin list, this
+ * function only returns the first.
+ */
+int acpi_get_gpio_by_index(struct device *dev, int index,
+			   struct acpi_gpio_info *info)
+{
+	struct acpi_gpio_lookup lookup;
+	struct list_head resource_list;
+	struct acpi_device *adev;
+	acpi_handle handle;
+	int ret;
+
+	if (!dev)
+		return -EINVAL;
+
+	handle = ACPI_HANDLE(dev);
+	if (!handle || acpi_bus_get_device(handle, &adev))
+		return -ENODEV;
+
+	memset(&lookup, 0, sizeof(lookup));
+	lookup.index = index;
+	lookup.gpio = -ENODEV;
+
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_resources(adev, &resource_list, acpi_find_gpio,
+				     &lookup);
+	if (ret < 0)
+		return ret;
+
+	acpi_dev_free_resource_list(&resource_list);
+
+	if (lookup.gpio >= 0 && info)
+		*info = lookup.info;
+
+	return lookup.gpio;
+}
+EXPORT_SYMBOL_GPL(acpi_get_gpio_by_index);
+
+/**
+ * acpi_gpiochip_free_interrupts() - Free GPIO _EVT ACPI event interrupts.
+ * @chip:      gpio chip
+ *
+ * Free interrupts associated with the _EVT method for the given GPIO chip.
+ *
+ * The remaining ACPI event interrupts associated with the chip are freed
+ * automatically.
+ */
+void acpi_gpiochip_free_interrupts(struct gpio_chip *chip)
+{
+	acpi_handle handle;
+	acpi_status status;
+	struct list_head *evt_pins;
+	struct acpi_gpio_evt_pin *evt_pin, *ep;
+
+	if (!chip->dev || !chip->to_irq)
+		return;
+
+	handle = ACPI_HANDLE(chip->dev);
+	if (!handle)
+		return;
+
+	status = acpi_get_data(handle, acpi_gpio_evt_dh, (void **)&evt_pins);
+	if (ACPI_FAILURE(status))
+		return;
+
+	list_for_each_entry_safe_reverse(evt_pin, ep, evt_pins, node) {
+		devm_free_irq(chip->dev, evt_pin->irq, evt_pin);
+		list_del(&evt_pin->node);
+		kfree(evt_pin);
+	}
+
+	acpi_detach_data(handle, acpi_gpio_evt_dh);
+	kfree(evt_pins);
+}
+EXPORT_SYMBOL(acpi_gpiochip_free_interrupts);

drivers/gpio/gpiolib-of.c

@@ -61,7 +61,7 @@ static int of_gpiochip_find_and_xlate(struct gpio_chip *gc, void *data)
  * in flags for the GPIO.
  */
 int of_get_named_gpio_flags(struct device_node *np, const char *propname,
-                           int index, enum of_gpio_flags *flags)
+			   int index, enum of_gpio_flags *flags)
 {
 	/* Return -EPROBE_DEFER to support probe() functions to be called
 	 * later when the GPIO actually becomes available

include/linux/acpi_gpio.h

 #ifndef _LINUX_ACPI_GPIO_H_
 #define _LINUX_ACPI_GPIO_H_
 
+#include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/gpio.h>
 
+/**
+ * struct acpi_gpio_info - ACPI GPIO specific information
+ * @gpioint: if %true this GPIO is of type GpioInt otherwise type is GpioIo
+ */
+struct acpi_gpio_info {
+	bool gpioint;
+};
+
 #ifdef CONFIG_GPIO_ACPI
 
 int acpi_get_gpio(char *path, int pin);
+int acpi_get_gpio_by_index(struct device *dev, int index,
+			   struct acpi_gpio_info *info);
 void acpi_gpiochip_request_interrupts(struct gpio_chip *chip);
+void acpi_gpiochip_free_interrupts(struct gpio_chip *chip);
 
 #else /* CONFIG_GPIO_ACPI */
 
@@ -16,7 +28,14 @@ static inline int acpi_get_gpio(char *path, int pin)
 	return -ENODEV;
 }
 
+static inline int acpi_get_gpio_by_index(struct device *dev, int index,
+					 struct acpi_gpio_info *info)
+{
+	return -ENODEV;
+}
+
 static inline void acpi_gpiochip_request_interrupts(struct gpio_chip *chip) { }
+static inline void acpi_gpiochip_free_interrupts(struct gpio_chip *chip) { }
 
 #endif /* CONFIG_GPIO_ACPI */
 

include/linux/basic_mmio_gpio.h

@@ -72,5 +72,6 @@ int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
 #define BGPIOF_BIG_ENDIAN		BIT(0)
 #define BGPIOF_UNREADABLE_REG_SET	BIT(1) /* reg_set is unreadable */
 #define BGPIOF_UNREADABLE_REG_DIR	BIT(2) /* reg_dir is unreadable */
+#define BGPIOF_BIG_ENDIAN_BYTE_ORDER	BIT(3)
 
 #endif /* __BASIC_MMIO_GPIO_H */