phy: add phy-hi6220-usb

Support hi6220 use phy for HiKey board
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Documentation/devicetree/bindings/phy/phy-hi6220-usb.txt

+Hisilicon hi6220 usb PHY
+-----------------------
+
+Required properties:
+- compatible: should be "hisilicon,hi6220-usb-phy"
+- #phy-cells: must be 0
+- hisilicon,peripheral-syscon: phandle of syscon used to control phy.
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+	usb_phy: usbphy {
+		compatible = "hisilicon,hi6220-usb-phy";
+		#phy-cells = <0>;
+		phy-supply = <&fixed_5v_hub>;
+		hisilicon,peripheral-syscon = <&sys_ctrl>;
+	};

drivers/phy/Kconfig

@@ -222,6 +222,15 @@ config PHY_MT65XX_USB3
 	  for mt65xx SoCs. it supports two usb2.0 ports and
 	  one usb3.0 port.
 
+config PHY_HI6220_USB
+	tristate "hi6220 USB PHY support"
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the HISILICON HI6220 USB PHY.
+
+	  To compile this driver as a module, choose M here.
+
 config PHY_SUN4I_USB
 	tristate "Allwinner sunxi SoC USB PHY driver"
 	depends on ARCH_SUNXI && HAS_IOMEM && OF

drivers/phy/Makefile

@@ -24,6 +24,7 @@ obj-$(CONFIG_TI_PIPE3)			+= phy-ti-pipe3.o
 obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o
 obj-$(CONFIG_PHY_EXYNOS5250_SATA)	+= phy-exynos5250-sata.o
 obj-$(CONFIG_PHY_HIX5HD2_SATA)		+= phy-hix5hd2-sata.o
+obj-$(CONFIG_PHY_HI6220_USB)		+= phy-hi6220-usb.o
 obj-$(CONFIG_PHY_MT65XX_USB3)		+= phy-mt65xx-usb3.o
 obj-$(CONFIG_PHY_SUN4I_USB)		+= phy-sun4i-usb.o
 obj-$(CONFIG_PHY_SUN9I_USB)		+= phy-sun9i-usb.o

drivers/phy/phy-hi6220-usb.c

+/*
+ * Copyright (c) 2015 Linaro Ltd.
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+
+#define SC_PERIPH_CTRL4			0x00c
+
+#define CTRL4_PICO_SIDDQ		BIT(6)
+#define CTRL4_PICO_OGDISABLE		BIT(8)
+#define CTRL4_PICO_VBUSVLDEXT		BIT(10)
+#define CTRL4_PICO_VBUSVLDEXTSEL	BIT(11)
+#define CTRL4_OTG_PHY_SEL		BIT(21)
+
+#define SC_PERIPH_CTRL5			0x010
+
+#define CTRL5_USBOTG_RES_SEL		BIT(3)
+#define CTRL5_PICOPHY_ACAENB		BIT(4)
+#define CTRL5_PICOPHY_BC_MODE		BIT(5)
+#define CTRL5_PICOPHY_CHRGSEL		BIT(6)
+#define CTRL5_PICOPHY_VDATSRCEND	BIT(7)
+#define CTRL5_PICOPHY_VDATDETENB	BIT(8)
+#define CTRL5_PICOPHY_DCDENB		BIT(9)
+#define CTRL5_PICOPHY_IDDIG		BIT(10)
+
+#define SC_PERIPH_CTRL8			0x018
+#define SC_PERIPH_RSTEN0		0x300
+#define SC_PERIPH_RSTDIS0		0x304
+
+#define RST0_USBOTG_BUS			BIT(4)
+#define RST0_POR_PICOPHY		BIT(5)
+#define RST0_USBOTG			BIT(6)
+#define RST0_USBOTG_32K			BIT(7)
+
+#define EYE_PATTERN_PARA		0x7053348c
+
+struct hi6220_priv {
+	struct regmap *reg;
+	struct device *dev;
+};
+
+static void hi6220_phy_init(struct hi6220_priv *priv)
+{
+	struct regmap *reg = priv->reg;
+	u32 val, mask;
+
+	val = RST0_USBOTG_BUS | RST0_POR_PICOPHY |
+	      RST0_USBOTG | RST0_USBOTG_32K;
+	mask = val;
+	regmap_update_bits(reg, SC_PERIPH_RSTEN0, mask, val);
+	regmap_update_bits(reg, SC_PERIPH_RSTDIS0, mask, val);
+}
+
+static int hi6220_phy_setup(struct hi6220_priv *priv, bool on)
+{
+	struct regmap *reg = priv->reg;
+	u32 val, mask;
+	int ret;
+
+	if (on) {
+		val = CTRL5_USBOTG_RES_SEL | CTRL5_PICOPHY_ACAENB;
+		mask = val | CTRL5_PICOPHY_BC_MODE;
+		ret = regmap_update_bits(reg, SC_PERIPH_CTRL5, mask, val);
+		if (ret)
+			goto out;
+
+		val =  CTRL4_PICO_VBUSVLDEXT | CTRL4_PICO_VBUSVLDEXTSEL |
+		       CTRL4_OTG_PHY_SEL;
+		mask = val | CTRL4_PICO_SIDDQ | CTRL4_PICO_OGDISABLE;
+		ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val);
+		if (ret)
+			goto out;
+
+		ret = regmap_write(reg, SC_PERIPH_CTRL8, EYE_PATTERN_PARA);
+		if (ret)
+			goto out;
+	} else {
+		val = CTRL4_PICO_SIDDQ;
+		mask = val;
+		ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val);
+		if (ret)
+			goto out;
+	}
+
+	return 0;
+out:
+	dev_err(priv->dev, "failed to setup phy ret: %d\n", ret);
+	return ret;
+}
+
+static int hi6220_phy_start(struct phy *phy)
+{
+	struct hi6220_priv *priv = phy_get_drvdata(phy);
+
+	return hi6220_phy_setup(priv, true);
+}
+
+static int hi6220_phy_exit(struct phy *phy)
+{
+	struct hi6220_priv *priv = phy_get_drvdata(phy);
+
+	return hi6220_phy_setup(priv, false);
+}
+
+static struct phy_ops hi6220_phy_ops = {
+	.init		= hi6220_phy_start,
+	.exit		= hi6220_phy_exit,
+	.owner		= THIS_MODULE,
+};
+
+static int hi6220_phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct phy *phy;
+	struct hi6220_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	priv->reg = syscon_regmap_lookup_by_phandle(dev->of_node,
+					"hisilicon,peripheral-syscon");
+	if (IS_ERR(priv->reg)) {
+		dev_err(dev, "no hisilicon,peripheral-syscon\n");
+		return PTR_ERR(priv->reg);
+	}
+
+	hi6220_phy_init(priv);
+
+	phy = devm_phy_create(dev, NULL, &hi6220_phy_ops);
+	if (IS_ERR(phy))
+		return PTR_ERR(phy);
+
+	phy_set_drvdata(phy, priv);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id hi6220_phy_of_match[] = {
+	{.compatible = "hisilicon,hi6220-usb-phy",},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, hi6220_phy_of_match);
+
+static struct platform_driver hi6220_phy_driver = {
+	.probe	= hi6220_phy_probe,
+	.driver = {
+		.name	= "hi6220-usb-phy",
+		.of_match_table	= hi6220_phy_of_match,
+	}
+};
+module_platform_driver(hi6220_phy_driver);
+
+MODULE_DESCRIPTION("HISILICON HI6220 USB PHY driver");
+MODULE_ALIAS("platform:hi6220-usb-phy");
+MODULE_LICENSE("GPL");