clk: tegra114: implement wait_for_reset and disable_clock for tegra_cpu_car_ops

The conventional CPU hotplug sequence on the other Tegra chips, we will also
clock gate the CPU in tegra_cpu_kill() after the CPU was power gated. For
Tegra114, the flow controller will clock gate the CPU after the power down
sequence. But we still need to implement a empty function for disable_clock
to avoid kernel warning message.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

drivers/clk/tegra/clk-tegra114.c

@@ -250,6 +250,9 @@
 #define CLK_SOURCE_XUSB_DEV_SRC 0x60c
 #define CLK_SOURCE_EMC 0x19c
 
+/* Tegra CPU clock and reset control regs */
+#define CLK_RST_CONTROLLER_CPU_CMPLX_STATUS	0x470
+
 static int periph_clk_enb_refcnt[CLK_OUT_ENB_NUM * 32];
 
 static void __iomem *clk_base;
@@ -2000,7 +2003,25 @@ static __init void tegra114_periph_clk_init(void __iomem *clk_base)
 	}
 }
 
-static struct tegra_cpu_car_ops tegra114_cpu_car_ops;
+/* Tegra114 CPU clock and reset control functions */
+static void tegra114_wait_cpu_in_reset(u32 cpu)
+{
+	unsigned int reg;
+
+	do {
+		reg = readl(clk_base + CLK_RST_CONTROLLER_CPU_CMPLX_STATUS);
+		cpu_relax();
+	} while (!(reg & (1 << cpu)));  /* check CPU been reset or not */
+}
+static void tegra114_disable_cpu_clock(u32 cpu)
+{
+	/* flow controller would take care in the power sequence. */
+}
+
+static struct tegra_cpu_car_ops tegra114_cpu_car_ops = {
+	.wait_for_reset	= tegra114_wait_cpu_in_reset,
+	.disable_clock	= tegra114_disable_cpu_clock,
+};
 
 static const struct of_device_id pmc_match[] __initconst = {
 	{ .compatible = "nvidia,tegra114-pmc" },