Commit 32ba19ef authored by Nithin Sujir's avatar Nithin Sujir Committed by David S. Miller

tg3: Simplify ring control block setup

The current code calls tg3_set_bdinfo() separately on napi0, followed by
a loop that does napi1+. Simplify it by setting bdinfo in the loop for
all napi contexts.
Signed-off-by: default avatarNithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 2e460fc0
......@@ -9239,6 +9239,48 @@ static void __tg3_set_coalesce(struct tg3 *tp, struct ethtool_coalesce *ec)
}
}
/* tp->lock is held. */
static void tg3_tx_rcbs_init(struct tg3 *tp)
{
int i = 0;
u32 txrcb = NIC_SRAM_SEND_RCB;
if (tg3_flag(tp, ENABLE_TSS))
i++;
for (; i < tp->irq_max; i++, txrcb += TG3_BDINFO_SIZE) {
struct tg3_napi *tnapi = &tp->napi[i];
if (!tnapi->tx_ring)
continue;
tg3_set_bdinfo(tp, txrcb, tnapi->tx_desc_mapping,
(TG3_TX_RING_SIZE << BDINFO_FLAGS_MAXLEN_SHIFT),
NIC_SRAM_TX_BUFFER_DESC);
}
}
/* tp->lock is held. */
static void tg3_rx_ret_rcbs_init(struct tg3 *tp)
{
int i = 0;
u32 rxrcb = NIC_SRAM_RCV_RET_RCB;
if (tg3_flag(tp, ENABLE_RSS))
i++;
for (; i < tp->irq_max; i++, rxrcb += TG3_BDINFO_SIZE) {
struct tg3_napi *tnapi = &tp->napi[i];
if (!tnapi->rx_rcb)
continue;
tg3_set_bdinfo(tp, rxrcb, tnapi->rx_rcb_mapping,
(tp->rx_ret_ring_mask + 1) <<
BDINFO_FLAGS_MAXLEN_SHIFT, 0);
}
}
/* tp->lock is held. */
static void tg3_rings_reset(struct tg3 *tp)
{
......@@ -9315,9 +9357,6 @@ static void tg3_rings_reset(struct tg3 *tp)
tw32_tx_mbox(mbox + i * 8, 0);
}
txrcb = NIC_SRAM_SEND_RCB;
rxrcb = NIC_SRAM_RCV_RET_RCB;
/* Clear status block in ram. */
memset(tnapi->hw_status, 0, TG3_HW_STATUS_SIZE);
......@@ -9327,46 +9366,20 @@ static void tg3_rings_reset(struct tg3 *tp)
tw32(HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_LOW,
((u64) tnapi->status_mapping & 0xffffffff));
if (tnapi->tx_ring) {
tg3_set_bdinfo(tp, txrcb, tnapi->tx_desc_mapping,
(TG3_TX_RING_SIZE <<
BDINFO_FLAGS_MAXLEN_SHIFT),
NIC_SRAM_TX_BUFFER_DESC);
txrcb += TG3_BDINFO_SIZE;
}
if (tnapi->rx_rcb) {
tg3_set_bdinfo(tp, rxrcb, tnapi->rx_rcb_mapping,
(tp->rx_ret_ring_mask + 1) <<
BDINFO_FLAGS_MAXLEN_SHIFT, 0);
rxrcb += TG3_BDINFO_SIZE;
}
stblk = HOSTCC_STATBLCK_RING1;
for (i = 1, tnapi++; i < tp->irq_cnt; i++, tnapi++) {
u64 mapping = (u64)tnapi->status_mapping;
tw32(stblk + TG3_64BIT_REG_HIGH, mapping >> 32);
tw32(stblk + TG3_64BIT_REG_LOW, mapping & 0xffffffff);
stblk += 8;
/* Clear status block in ram. */
memset(tnapi->hw_status, 0, TG3_HW_STATUS_SIZE);
if (tnapi->tx_ring) {
tg3_set_bdinfo(tp, txrcb, tnapi->tx_desc_mapping,
(TG3_TX_RING_SIZE <<
BDINFO_FLAGS_MAXLEN_SHIFT),
NIC_SRAM_TX_BUFFER_DESC);
txrcb += TG3_BDINFO_SIZE;
}
tg3_set_bdinfo(tp, rxrcb, tnapi->rx_rcb_mapping,
((tp->rx_ret_ring_mask + 1) <<
BDINFO_FLAGS_MAXLEN_SHIFT), 0);
stblk += 8;
rxrcb += TG3_BDINFO_SIZE;
}
tg3_tx_rcbs_init(tp);
tg3_rx_ret_rcbs_init(tp);
}
static void tg3_setup_rxbd_thresholds(struct tg3 *tp)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment