Merge branch 'fixes' of...

Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc

drivers/thermal/db8500_cpufreq_cooling.c

@@ -18,7 +18,6 @@
  */
 
 #include <linux/cpu_cooling.h>
-#include <linux/cpufreq.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -28,18 +27,17 @@
 static int db8500_cpufreq_cooling_probe(struct platform_device *pdev)
 {
 	struct thermal_cooling_device *cdev;
-	struct cpumask mask_val;
-
-	/* make sure cpufreq driver has been initialized */
-	if (!cpufreq_frequency_get_table(0))
-		return -EPROBE_DEFER;
-
-	cpumask_set_cpu(0, &mask_val);
-	cdev = cpufreq_cooling_register(&mask_val);
 
+	cdev = cpufreq_cooling_register(cpu_present_mask);
 	if (IS_ERR(cdev)) {
-		dev_err(&pdev->dev, "Failed to register cooling device\n");
-		return PTR_ERR(cdev);
+		int ret = PTR_ERR(cdev);
+
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"Failed to register cooling device %d\n",
+				ret);
+				
+		return ret;
 	}
 
 	platform_set_drvdata(pdev, cdev);

drivers/thermal/imx_thermal.c

@@ -9,7 +9,6 @@
 
 #include <linux/clk.h>
 #include <linux/cpu_cooling.h>
-#include <linux/cpufreq.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/init.h>
@@ -454,15 +453,10 @@ static int imx_thermal_probe(struct platform_device *pdev)
 	const struct of_device_id *of_id =
 		of_match_device(of_imx_thermal_match, &pdev->dev);
 	struct imx_thermal_data *data;
-	struct cpumask clip_cpus;
 	struct regmap *map;
 	int measure_freq;
 	int ret;
 
-	if (!cpufreq_get_current_driver()) {
-		dev_dbg(&pdev->dev, "no cpufreq driver!");
-		return -EPROBE_DEFER;
-	}
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -516,12 +510,13 @@ static int imx_thermal_probe(struct platform_device *pdev)
 	regmap_write(map, MISC0 + REG_SET, MISC0_REFTOP_SELBIASOFF);
 	regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
 
-	cpumask_set_cpu(0, &clip_cpus);
-	data->cdev = cpufreq_cooling_register(&clip_cpus);
+	data->cdev = cpufreq_cooling_register(cpu_present_mask);
 	if (IS_ERR(data->cdev)) {
 		ret = PTR_ERR(data->cdev);
-		dev_err(&pdev->dev,
-			"failed to register cpufreq cooling device: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"failed to register cpufreq cooling device: %d\n",
+				ret);
 		return ret;
 	}
 

drivers/thermal/samsung/Kconfig

 config EXYNOS_THERMAL
 	tristate "Exynos thermal management unit driver"
-	depends on ARCH_HAS_BANDGAP && OF
+	depends on OF
 	help
 	  If you say yes here you get support for the TMU (Thermal Management
 	  Unit) driver for SAMSUNG EXYNOS series of SoCs. This driver initialises

drivers/thermal/samsung/exynos_thermal_common.c

@@ -347,7 +347,6 @@ void exynos_report_trigger(struct thermal_sensor_conf *conf)
 int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
 {
 	int ret;
-	struct cpumask mask_val;
 	struct exynos_thermal_zone *th_zone;
 
 	if (!sensor_conf || !sensor_conf->read_temperature) {
@@ -367,13 +366,14 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
 	 *	 sensor
 	 */
 	if (sensor_conf->cooling_data.freq_clip_count > 0) {
-		cpumask_set_cpu(0, &mask_val);
 		th_zone->cool_dev[th_zone->cool_dev_size] =
-					cpufreq_cooling_register(&mask_val);
+				cpufreq_cooling_register(cpu_present_mask);
 		if (IS_ERR(th_zone->cool_dev[th_zone->cool_dev_size])) {
-			dev_err(sensor_conf->dev,
-				"Failed to register cpufreq cooling device\n");
-			ret = -EINVAL;
+			ret = PTR_ERR(th_zone->cool_dev[th_zone->cool_dev_size]);
+			if (ret != -EPROBE_DEFER)
+				dev_err(sensor_conf->dev,
+					"Failed to register cpufreq cooling device: %d\n",
+					ret);
 			goto err_unregister;
 		}
 		th_zone->cool_dev_size++;

drivers/thermal/samsung/exynos_tmu.c

@@ -927,7 +927,10 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 	/* Register the sensor with thermal management interface */
 	ret = exynos_register_thermal(sensor_conf);
 	if (ret) {
-		dev_err(&pdev->dev, "Failed to register thermal interface\n");
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"Failed to register thermal interface: %d\n",
+				ret);
 		goto err_clk;
 	}
 	data->reg_conf = sensor_conf;

drivers/thermal/thermal_core.c

@@ -930,7 +930,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
 	struct thermal_zone_device *pos1;
 	struct thermal_cooling_device *pos2;
 	unsigned long max_state;
-	int result;
+	int result, ret;
 
 	if (trip >= tz->trips || (trip < 0 && trip != THERMAL_TRIPS_NONE))
 		return -EINVAL;
@@ -947,7 +947,9 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
 	if (tz != pos1 || cdev != pos2)
 		return -EINVAL;
 
-	cdev->ops->get_max_state(cdev, &max_state);
+	ret = cdev->ops->get_max_state(cdev, &max_state);
+	if (ret)
+		return ret;
 
 	/* lower default 0, upper default max_state */
 	lower = lower == THERMAL_NO_LIMIT ? 0 : lower;

drivers/thermal/ti-soc-thermal/ti-thermal-common.c

@@ -28,7 +28,6 @@
 #include <linux/kernel.h>
 #include <linux/workqueue.h>
 #include <linux/thermal.h>
-#include <linux/cpufreq.h>
 #include <linux/cpumask.h>
 #include <linux/cpu_cooling.h>
 #include <linux/of.h>
@@ -407,17 +406,17 @@ int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id)
 	if (!data)
 		return -EINVAL;
 
-	if (!cpufreq_get_current_driver()) {
-		dev_dbg(bgp->dev, "no cpufreq driver yet\n");
-		return -EPROBE_DEFER;
-	}
-
 	/* Register cooling device */
 	data->cool_dev = cpufreq_cooling_register(cpu_present_mask);
 	if (IS_ERR(data->cool_dev)) {
-		dev_err(bgp->dev,
-			"Failed to register cpufreq cooling device\n");
-		return PTR_ERR(data->cool_dev);
+		int ret = PTR_ERR(data->cool_dev);
+
+		if (ret != -EPROBE_DEFER)
+			dev_err(bgp->dev,
+				"Failed to register cpu cooling device %d\n",
+				ret);
+
+		return ret;
 	}
 	ti_bandgap_set_sensor_data(bgp, id, data);
 

include/dt-bindings/thermal/thermal.h

@@ -11,7 +11,7 @@
 #define _DT_BINDINGS_THERMAL_THERMAL_H
 
 /* On cooling devices upper and lower limits */
-#define THERMAL_NO_LIMIT		(-1UL)
+#define THERMAL_NO_LIMIT		(~0)
 
 #endif
 

include/linux/cpu_cooling.h

@@ -50,7 +50,7 @@ static inline struct thermal_cooling_device *
 of_cpufreq_cooling_register(struct device_node *np,
 			    const struct cpumask *clip_cpus)
 {
-	return NULL;
+	return ERR_PTR(-ENOSYS);
 }
 #endif
 
@@ -65,13 +65,13 @@ unsigned long cpufreq_cooling_get_level(unsigned int cpu, unsigned int freq);
 static inline struct thermal_cooling_device *
 cpufreq_cooling_register(const struct cpumask *clip_cpus)
 {
-	return NULL;
+	return ERR_PTR(-ENOSYS);
 }
 static inline struct thermal_cooling_device *
 of_cpufreq_cooling_register(struct device_node *np,
 			    const struct cpumask *clip_cpus)
 {
-	return NULL;
+	return ERR_PTR(-ENOSYS);
 }
 static inline
 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)

include/linux/thermal.h

@@ -38,7 +38,7 @@
 #define THERMAL_CSTATE_INVALID -1UL
 
 /* No upper/lower limit requirement */
-#define THERMAL_NO_LIMIT	THERMAL_CSTATE_INVALID
+#define THERMAL_NO_LIMIT	((u32)~0)
 
 /* Unit conversion macros */
 #define KELVIN_TO_CELSIUS(t)	(long)(((long)t-2732 >= 0) ?	\