Commit 33025a5c authored by Laurent Pinchart's avatar Laurent Pinchart Committed by Mauro Carvalho Chehab

media: v4l: vsp1: Add support for the DISCOM entity

The DISCOM calculates a CRC on a configurable window of the frame. It
interfaces to the VSP through the UIF glue, hence the name used in the
code.

The module supports configuration of the CRC window through the crop
rectangle on the sink pad of the corresponding entity. However, unlike
the traditional V4L2 subdevice model, the crop rectangle does not
influence the format on the source pad.

Modeling the DISCOM as a sink-only entity would allow adhering to the
V4L2 subdevice model at the expense of more complex code in the driver,
as at the hardware level the UIF is handled as a sink+source entity. As
the DISCOM is only present in R-Car Gen3 VSP-D and VSP-DL instances it
is not exposed to userspace through V4L2 but controlled through the DU
driver. We can thus change this model later if needed without fear of
affecting userspace.
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: default avatarJacopo Mondi <jacopo@jmondi.org>
Reviewed-by: default avatarKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
parent 6e274b43
...@@ -5,6 +5,6 @@ vsp1-y += vsp1_rpf.o vsp1_rwpf.o vsp1_wpf.o ...@@ -5,6 +5,6 @@ vsp1-y += vsp1_rpf.o vsp1_rwpf.o vsp1_wpf.o
vsp1-y += vsp1_clu.o vsp1_hsit.o vsp1_lut.o vsp1-y += vsp1_clu.o vsp1_hsit.o vsp1_lut.o
vsp1-y += vsp1_brx.o vsp1_sru.o vsp1_uds.o vsp1-y += vsp1_brx.o vsp1_sru.o vsp1_uds.o
vsp1-y += vsp1_hgo.o vsp1_hgt.o vsp1_histo.o vsp1-y += vsp1_hgo.o vsp1_hgt.o vsp1_histo.o
vsp1-y += vsp1_lif.o vsp1-y += vsp1_lif.o vsp1_uif.o
obj-$(CONFIG_VIDEO_RENESAS_VSP1) += vsp1.o obj-$(CONFIG_VIDEO_RENESAS_VSP1) += vsp1.o
...@@ -36,10 +36,12 @@ struct vsp1_lut; ...@@ -36,10 +36,12 @@ struct vsp1_lut;
struct vsp1_rwpf; struct vsp1_rwpf;
struct vsp1_sru; struct vsp1_sru;
struct vsp1_uds; struct vsp1_uds;
struct vsp1_uif;
#define VSP1_MAX_LIF 2 #define VSP1_MAX_LIF 2
#define VSP1_MAX_RPF 5 #define VSP1_MAX_RPF 5
#define VSP1_MAX_UDS 3 #define VSP1_MAX_UDS 3
#define VSP1_MAX_UIF 2
#define VSP1_MAX_WPF 4 #define VSP1_MAX_WPF 4
#define VSP1_HAS_LUT (1 << 1) #define VSP1_HAS_LUT (1 << 1)
...@@ -60,6 +62,7 @@ struct vsp1_device_info { ...@@ -60,6 +62,7 @@ struct vsp1_device_info {
unsigned int lif_count; unsigned int lif_count;
unsigned int rpf_count; unsigned int rpf_count;
unsigned int uds_count; unsigned int uds_count;
unsigned int uif_count;
unsigned int wpf_count; unsigned int wpf_count;
unsigned int num_bru_inputs; unsigned int num_bru_inputs;
bool uapi; bool uapi;
...@@ -86,6 +89,7 @@ struct vsp1_device { ...@@ -86,6 +89,7 @@ struct vsp1_device {
struct vsp1_rwpf *rpf[VSP1_MAX_RPF]; struct vsp1_rwpf *rpf[VSP1_MAX_RPF];
struct vsp1_sru *sru; struct vsp1_sru *sru;
struct vsp1_uds *uds[VSP1_MAX_UDS]; struct vsp1_uds *uds[VSP1_MAX_UDS];
struct vsp1_uif *uif[VSP1_MAX_UIF];
struct vsp1_rwpf *wpf[VSP1_MAX_WPF]; struct vsp1_rwpf *wpf[VSP1_MAX_WPF];
struct list_head entities; struct list_head entities;
......
...@@ -35,6 +35,7 @@ ...@@ -35,6 +35,7 @@
#include "vsp1_rwpf.h" #include "vsp1_rwpf.h"
#include "vsp1_sru.h" #include "vsp1_sru.h"
#include "vsp1_uds.h" #include "vsp1_uds.h"
#include "vsp1_uif.h"
#include "vsp1_video.h" #include "vsp1_video.h"
/* ----------------------------------------------------------------------------- /* -----------------------------------------------------------------------------
...@@ -409,6 +410,19 @@ static int vsp1_create_entities(struct vsp1_device *vsp1) ...@@ -409,6 +410,19 @@ static int vsp1_create_entities(struct vsp1_device *vsp1)
list_add_tail(&uds->entity.list_dev, &vsp1->entities); list_add_tail(&uds->entity.list_dev, &vsp1->entities);
} }
for (i = 0; i < vsp1->info->uif_count; ++i) {
struct vsp1_uif *uif;
uif = vsp1_uif_create(vsp1, i);
if (IS_ERR(uif)) {
ret = PTR_ERR(uif);
goto done;
}
vsp1->uif[i] = uif;
list_add_tail(&uif->entity.list_dev, &vsp1->entities);
}
for (i = 0; i < vsp1->info->wpf_count; ++i) { for (i = 0; i < vsp1->info->wpf_count; ++i) {
struct vsp1_rwpf *wpf; struct vsp1_rwpf *wpf;
...@@ -513,6 +527,9 @@ static int vsp1_device_init(struct vsp1_device *vsp1) ...@@ -513,6 +527,9 @@ static int vsp1_device_init(struct vsp1_device *vsp1)
for (i = 0; i < vsp1->info->uds_count; ++i) for (i = 0; i < vsp1->info->uds_count; ++i)
vsp1_write(vsp1, VI6_DPR_UDS_ROUTE(i), VI6_DPR_NODE_UNUSED); vsp1_write(vsp1, VI6_DPR_UDS_ROUTE(i), VI6_DPR_NODE_UNUSED);
for (i = 0; i < vsp1->info->uif_count; ++i)
vsp1_write(vsp1, VI6_DPR_UIF_ROUTE(i), VI6_DPR_NODE_UNUSED);
vsp1_write(vsp1, VI6_DPR_SRU_ROUTE, VI6_DPR_NODE_UNUSED); vsp1_write(vsp1, VI6_DPR_SRU_ROUTE, VI6_DPR_NODE_UNUSED);
vsp1_write(vsp1, VI6_DPR_LUT_ROUTE, VI6_DPR_NODE_UNUSED); vsp1_write(vsp1, VI6_DPR_LUT_ROUTE, VI6_DPR_NODE_UNUSED);
vsp1_write(vsp1, VI6_DPR_CLU_ROUTE, VI6_DPR_NODE_UNUSED); vsp1_write(vsp1, VI6_DPR_CLU_ROUTE, VI6_DPR_NODE_UNUSED);
...@@ -740,6 +757,7 @@ static const struct vsp1_device_info vsp1_device_infos[] = { ...@@ -740,6 +757,7 @@ static const struct vsp1_device_info vsp1_device_infos[] = {
.features = VSP1_HAS_BRU | VSP1_HAS_WPF_VFLIP, .features = VSP1_HAS_BRU | VSP1_HAS_WPF_VFLIP,
.lif_count = 1, .lif_count = 1,
.rpf_count = 5, .rpf_count = 5,
.uif_count = 1,
.wpf_count = 2, .wpf_count = 2,
.num_bru_inputs = 5, .num_bru_inputs = 5,
}, { }, {
...@@ -749,6 +767,7 @@ static const struct vsp1_device_info vsp1_device_infos[] = { ...@@ -749,6 +767,7 @@ static const struct vsp1_device_info vsp1_device_infos[] = {
.features = VSP1_HAS_BRS | VSP1_HAS_BRU, .features = VSP1_HAS_BRS | VSP1_HAS_BRU,
.lif_count = 1, .lif_count = 1,
.rpf_count = 5, .rpf_count = 5,
.uif_count = 1,
.wpf_count = 1, .wpf_count = 1,
.num_bru_inputs = 5, .num_bru_inputs = 5,
}, { }, {
...@@ -758,6 +777,7 @@ static const struct vsp1_device_info vsp1_device_infos[] = { ...@@ -758,6 +777,7 @@ static const struct vsp1_device_info vsp1_device_infos[] = {
.features = VSP1_HAS_BRS | VSP1_HAS_BRU, .features = VSP1_HAS_BRS | VSP1_HAS_BRU,
.lif_count = 2, .lif_count = 2,
.rpf_count = 5, .rpf_count = 5,
.uif_count = 2,
.wpf_count = 2, .wpf_count = 2,
.num_bru_inputs = 5, .num_bru_inputs = 5,
}, },
......
...@@ -539,6 +539,10 @@ struct media_pad *vsp1_entity_remote_pad(struct media_pad *pad) ...@@ -539,6 +539,10 @@ struct media_pad *vsp1_entity_remote_pad(struct media_pad *pad)
{ VSP1_ENTITY_UDS, idx, VI6_DPR_UDS_ROUTE(idx), \ { VSP1_ENTITY_UDS, idx, VI6_DPR_UDS_ROUTE(idx), \
{ VI6_DPR_NODE_UDS(idx) }, VI6_DPR_NODE_UDS(idx) } { VI6_DPR_NODE_UDS(idx) }, VI6_DPR_NODE_UDS(idx) }
#define VSP1_ENTITY_ROUTE_UIF(idx) \
{ VSP1_ENTITY_UIF, idx, VI6_DPR_UIF_ROUTE(idx), \
{ VI6_DPR_NODE_UIF(idx) }, VI6_DPR_NODE_UIF(idx) }
#define VSP1_ENTITY_ROUTE_WPF(idx) \ #define VSP1_ENTITY_ROUTE_WPF(idx) \
{ VSP1_ENTITY_WPF, idx, 0, \ { VSP1_ENTITY_WPF, idx, 0, \
{ VI6_DPR_NODE_WPF(idx) }, VI6_DPR_NODE_WPF(idx) } { VI6_DPR_NODE_WPF(idx) }, VI6_DPR_NODE_WPF(idx) }
...@@ -567,6 +571,8 @@ static const struct vsp1_route vsp1_routes[] = { ...@@ -567,6 +571,8 @@ static const struct vsp1_route vsp1_routes[] = {
VSP1_ENTITY_ROUTE_UDS(0), VSP1_ENTITY_ROUTE_UDS(0),
VSP1_ENTITY_ROUTE_UDS(1), VSP1_ENTITY_ROUTE_UDS(1),
VSP1_ENTITY_ROUTE_UDS(2), VSP1_ENTITY_ROUTE_UDS(2),
VSP1_ENTITY_ROUTE_UIF(0), /* Named UIF4 in the documentation */
VSP1_ENTITY_ROUTE_UIF(1), /* Named UIF5 in the documentation */
VSP1_ENTITY_ROUTE_WPF(0), VSP1_ENTITY_ROUTE_WPF(0),
VSP1_ENTITY_ROUTE_WPF(1), VSP1_ENTITY_ROUTE_WPF(1),
VSP1_ENTITY_ROUTE_WPF(2), VSP1_ENTITY_ROUTE_WPF(2),
......
...@@ -33,6 +33,7 @@ enum vsp1_entity_type { ...@@ -33,6 +33,7 @@ enum vsp1_entity_type {
VSP1_ENTITY_RPF, VSP1_ENTITY_RPF,
VSP1_ENTITY_SRU, VSP1_ENTITY_SRU,
VSP1_ENTITY_UDS, VSP1_ENTITY_UDS,
VSP1_ENTITY_UIF,
VSP1_ENTITY_WPF, VSP1_ENTITY_WPF,
}; };
......
...@@ -307,6 +307,44 @@ ...@@ -307,6 +307,44 @@
#define VI6_WPF_WRBCK_CTRL 0x1034 #define VI6_WPF_WRBCK_CTRL 0x1034
#define VI6_WPF_WRBCK_CTRL_WBMD (1 << 0) #define VI6_WPF_WRBCK_CTRL_WBMD (1 << 0)
/* -----------------------------------------------------------------------------
* UIF Control Registers
*/
#define VI6_UIF_OFFSET 0x100
#define VI6_UIF_DISCOM_DOCMCR 0x1c00
#define VI6_UIF_DISCOM_DOCMCR_CMPRU (1 << 16)
#define VI6_UIF_DISCOM_DOCMCR_CMPR (1 << 0)
#define VI6_UIF_DISCOM_DOCMSTR 0x1c04
#define VI6_UIF_DISCOM_DOCMSTR_CMPPRE (1 << 1)
#define VI6_UIF_DISCOM_DOCMSTR_CMPST (1 << 0)
#define VI6_UIF_DISCOM_DOCMCLSTR 0x1c08
#define VI6_UIF_DISCOM_DOCMCLSTR_CMPCLPRE (1 << 1)
#define VI6_UIF_DISCOM_DOCMCLSTR_CMPCLST (1 << 0)
#define VI6_UIF_DISCOM_DOCMIENR 0x1c0c
#define VI6_UIF_DISCOM_DOCMIENR_CMPPREIEN (1 << 1)
#define VI6_UIF_DISCOM_DOCMIENR_CMPIEN (1 << 0)
#define VI6_UIF_DISCOM_DOCMMDR 0x1c10
#define VI6_UIF_DISCOM_DOCMMDR_INTHRH(n) ((n) << 16)
#define VI6_UIF_DISCOM_DOCMPMR 0x1c14
#define VI6_UIF_DISCOM_DOCMPMR_CMPDFF(n) ((n) << 17)
#define VI6_UIF_DISCOM_DOCMPMR_CMPDFA(n) ((n) << 8)
#define VI6_UIF_DISCOM_DOCMPMR_CMPDAUF (1 << 7)
#define VI6_UIF_DISCOM_DOCMPMR_SEL(n) ((n) << 0)
#define VI6_UIF_DISCOM_DOCMECRCR 0x1c18
#define VI6_UIF_DISCOM_DOCMCCRCR 0x1c1c
#define VI6_UIF_DISCOM_DOCMSPXR 0x1c20
#define VI6_UIF_DISCOM_DOCMSPYR 0x1c24
#define VI6_UIF_DISCOM_DOCMSZXR 0x1c28
#define VI6_UIF_DISCOM_DOCMSZYR 0x1c2c
/* ----------------------------------------------------------------------------- /* -----------------------------------------------------------------------------
* DPR Control Registers * DPR Control Registers
*/ */
...@@ -339,7 +377,10 @@ ...@@ -339,7 +377,10 @@
#define VI6_DPR_SMPPT_PT_MASK (0x3f << 0) #define VI6_DPR_SMPPT_PT_MASK (0x3f << 0)
#define VI6_DPR_SMPPT_PT_SHIFT 0 #define VI6_DPR_SMPPT_PT_SHIFT 0
#define VI6_DPR_UIF_ROUTE(n) (0x2074 + (n) * 4)
#define VI6_DPR_NODE_RPF(n) (n) #define VI6_DPR_NODE_RPF(n) (n)
#define VI6_DPR_NODE_UIF(n) (12 + (n))
#define VI6_DPR_NODE_SRU 16 #define VI6_DPR_NODE_SRU 16
#define VI6_DPR_NODE_UDS(n) (17 + (n)) #define VI6_DPR_NODE_UDS(n) (17 + (n))
#define VI6_DPR_NODE_LUT 22 #define VI6_DPR_NODE_LUT 22
......
// SPDX-License-Identifier: GPL-2.0+
/*
* vsp1_uif.c -- R-Car VSP1 User Logic Interface
*
* Copyright (C) 2017-2018 Laurent Pinchart
*
* Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
*/
#include <linux/device.h>
#include <linux/gfp.h>
#include <linux/sys_soc.h>
#include <media/media-entity.h>
#include <media/v4l2-subdev.h>
#include "vsp1.h"
#include "vsp1_dl.h"
#include "vsp1_entity.h"
#include "vsp1_uif.h"
#define UIF_MIN_SIZE 4U
#define UIF_MAX_SIZE 8190U
/* -----------------------------------------------------------------------------
* Device Access
*/
static inline u32 vsp1_uif_read(struct vsp1_uif *uif, u32 reg)
{
return vsp1_read(uif->entity.vsp1,
uif->entity.index * VI6_UIF_OFFSET + reg);
}
static inline void vsp1_uif_write(struct vsp1_uif *uif, struct vsp1_dl_list *dl,
u32 reg, u32 data)
{
vsp1_dl_list_write(dl, reg + uif->entity.index * VI6_UIF_OFFSET, data);
}
u32 vsp1_uif_get_crc(struct vsp1_uif *uif)
{
return vsp1_uif_read(uif, VI6_UIF_DISCOM_DOCMCCRCR);
}
/* -----------------------------------------------------------------------------
* V4L2 Subdevice Pad Operations
*/
static const unsigned int uif_codes[] = {
MEDIA_BUS_FMT_ARGB8888_1X32,
MEDIA_BUS_FMT_AHSV8888_1X32,
MEDIA_BUS_FMT_AYUV8_1X32,
};
static int uif_enum_mbus_code(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_mbus_code_enum *code)
{
return vsp1_subdev_enum_mbus_code(subdev, cfg, code, uif_codes,
ARRAY_SIZE(uif_codes));
}
static int uif_enum_frame_size(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_frame_size_enum *fse)
{
return vsp1_subdev_enum_frame_size(subdev, cfg, fse, UIF_MIN_SIZE,
UIF_MIN_SIZE, UIF_MAX_SIZE,
UIF_MAX_SIZE);
}
static int uif_set_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt)
{
return vsp1_subdev_set_pad_format(subdev, cfg, fmt, uif_codes,
ARRAY_SIZE(uif_codes),
UIF_MIN_SIZE, UIF_MIN_SIZE,
UIF_MAX_SIZE, UIF_MAX_SIZE);
}
static int uif_get_selection(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_selection *sel)
{
struct vsp1_uif *uif = to_uif(subdev);
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
int ret = 0;
if (sel->pad != UIF_PAD_SINK)
return -EINVAL;
mutex_lock(&uif->entity.lock);
config = vsp1_entity_get_pad_config(&uif->entity, cfg, sel->which);
if (!config) {
ret = -EINVAL;
goto done;
}
switch (sel->target) {
case V4L2_SEL_TGT_CROP_BOUNDS:
case V4L2_SEL_TGT_CROP_DEFAULT:
format = vsp1_entity_get_pad_format(&uif->entity, config,
UIF_PAD_SINK);
sel->r.left = 0;
sel->r.top = 0;
sel->r.width = format->width;
sel->r.height = format->height;
break;
case V4L2_SEL_TGT_CROP:
sel->r = *vsp1_entity_get_pad_selection(&uif->entity, config,
sel->pad, sel->target);
break;
default:
ret = -EINVAL;
break;
}
done:
mutex_unlock(&uif->entity.lock);
return ret;
}
static int uif_set_selection(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_selection *sel)
{
struct vsp1_uif *uif = to_uif(subdev);
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
struct v4l2_rect *selection;
int ret = 0;
if (sel->pad != UIF_PAD_SINK ||
sel->target != V4L2_SEL_TGT_CROP)
return -EINVAL;
mutex_lock(&uif->entity.lock);
config = vsp1_entity_get_pad_config(&uif->entity, cfg, sel->which);
if (!config) {
ret = -EINVAL;
goto done;
}
/* The crop rectangle must be inside the input frame. */
format = vsp1_entity_get_pad_format(&uif->entity, config, UIF_PAD_SINK);
sel->r.left = clamp_t(unsigned int, sel->r.left, 0, format->width - 1);
sel->r.top = clamp_t(unsigned int, sel->r.top, 0, format->height - 1);
sel->r.width = clamp_t(unsigned int, sel->r.width, UIF_MIN_SIZE,
format->width - sel->r.left);
sel->r.height = clamp_t(unsigned int, sel->r.height, UIF_MIN_SIZE,
format->height - sel->r.top);
/* Store the crop rectangle. */
selection = vsp1_entity_get_pad_selection(&uif->entity, config,
sel->pad, V4L2_SEL_TGT_CROP);
*selection = sel->r;
done:
mutex_unlock(&uif->entity.lock);
return ret;
}
/* -----------------------------------------------------------------------------
* V4L2 Subdevice Operations
*/
static const struct v4l2_subdev_pad_ops uif_pad_ops = {
.init_cfg = vsp1_entity_init_cfg,
.enum_mbus_code = uif_enum_mbus_code,
.enum_frame_size = uif_enum_frame_size,
.get_fmt = vsp1_subdev_get_pad_format,
.set_fmt = uif_set_format,
.get_selection = uif_get_selection,
.set_selection = uif_set_selection,
};
static const struct v4l2_subdev_ops uif_ops = {
.pad = &uif_pad_ops,
};
/* -----------------------------------------------------------------------------
* VSP1 Entity Operations
*/
static void uif_configure(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl,
enum vsp1_entity_params params)
{
struct vsp1_uif *uif = to_uif(&entity->subdev);
const struct v4l2_rect *crop;
unsigned int left;
unsigned int width;
/*
* Per-partition configuration isn't needed as the DISCOM is used in
* display pipelines only.
*/
if (params != VSP1_ENTITY_PARAMS_INIT)
return;
vsp1_uif_write(uif, dl, VI6_UIF_DISCOM_DOCMPMR,
VI6_UIF_DISCOM_DOCMPMR_SEL(9));
crop = vsp1_entity_get_pad_selection(entity, entity->config,
UIF_PAD_SINK, V4L2_SEL_TGT_CROP);
left = crop->left;
width = crop->width;
/* On M3-W the horizontal coordinates are twice the register value. */
if (uif->m3w_quirk) {
left /= 2;
width /= 2;
}
vsp1_uif_write(uif, dl, VI6_UIF_DISCOM_DOCMSPXR, left);
vsp1_uif_write(uif, dl, VI6_UIF_DISCOM_DOCMSPYR, crop->top);
vsp1_uif_write(uif, dl, VI6_UIF_DISCOM_DOCMSZXR, width);
vsp1_uif_write(uif, dl, VI6_UIF_DISCOM_DOCMSZYR, crop->height);
vsp1_uif_write(uif, dl, VI6_UIF_DISCOM_DOCMCR,
VI6_UIF_DISCOM_DOCMCR_CMPR);
}
static const struct vsp1_entity_operations uif_entity_ops = {
.configure = uif_configure,
};
/* -----------------------------------------------------------------------------
* Initialization and Cleanup
*/
static const struct soc_device_attribute vsp1_r8a7796[] = {
{ .soc_id = "r8a7796" },
{ /* sentinel */ }
};
struct vsp1_uif *vsp1_uif_create(struct vsp1_device *vsp1, unsigned int index)
{
struct vsp1_uif *uif;
char name[6];
int ret;
uif = devm_kzalloc(vsp1->dev, sizeof(*uif), GFP_KERNEL);
if (!uif)
return ERR_PTR(-ENOMEM);
if (soc_device_match(vsp1_r8a7796))
uif->m3w_quirk = true;
uif->entity.ops = &uif_entity_ops;
uif->entity.type = VSP1_ENTITY_UIF;
uif->entity.index = index;
/* The datasheet names the two UIF instances UIF4 and UIF5. */
sprintf(name, "uif.%u", index + 4);
ret = vsp1_entity_init(vsp1, &uif->entity, name, 2, &uif_ops,
MEDIA_ENT_F_PROC_VIDEO_STATISTICS);
if (ret < 0)
return ERR_PTR(ret);
return uif;
}
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* vsp1_uif.h -- R-Car VSP1 User Logic Interface
*
* Copyright (C) 2017-2018 Laurent Pinchart
*
* Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
*/
#ifndef __VSP1_UIF_H__
#define __VSP1_UIF_H__
#include "vsp1_entity.h"
struct vsp1_device;
#define UIF_PAD_SINK 0
#define UIF_PAD_SOURCE 1
struct vsp1_uif {
struct vsp1_entity entity;
bool m3w_quirk;
};
static inline struct vsp1_uif *to_uif(struct v4l2_subdev *subdev)
{
return container_of(subdev, struct vsp1_uif, entity.subdev);
}
struct vsp1_uif *vsp1_uif_create(struct vsp1_device *vsp1, unsigned int index);
u32 vsp1_uif_get_crc(struct vsp1_uif *uif);
#endif /* __VSP1_UIF_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment