Merge branch 'clk-qcom-sdm845-lpass' into clk-next

 - Qualcomm SDM845 audio subsystem clks

* clk-qcom-sdm845-lpass:
  clk: qcom: Add lpass clock controller driver for SDM845
  dt-bindings: clock: Introduce QCOM LPASS clock bindings
  dt-bindings: clock: Update GCC bindings for protected-clocks

Documentation/devicetree/bindings/clock/qcom,gcc.txt

@@ -35,6 +35,8 @@ be part of GCC and hence the TSENS properties can also be
 part of the GCC/clock-controller node.
 For more details on the TSENS properties please refer
 Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+- protected-clocks : Protected clock specifier list as per common clock
+ binding.
 
 Example:
 	clock-controller@900000 {
@@ -55,3 +57,17 @@ Example of GCC with TSENS properties:
 		#reset-cells = <1>;
 		#thermal-sensor-cells = <1>;
 	};
+
+Example of GCC with protected-clocks properties:
+	clock-controller@100000 {
+		compatible = "qcom,gcc-sdm845";
+		reg = <0x100000 0x1f0000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		#power-domain-cells = <1>;
+		protected-clocks = <GCC_QSPI_CORE_CLK>,
+				   <GCC_QSPI_CORE_CLK_SRC>,
+				   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+				   <GCC_LPASS_Q6_AXI_CLK>,
+				   <GCC_LPASS_SWAY_CLK>;
+	};

Documentation/devicetree/bindings/clock/qcom,lpasscc.txt

+Qualcomm LPASS Clock Controller Binding
+-----------------------------------------------
+
+Required properties :
+- compatible		: shall contain "qcom,sdm845-lpasscc"
+- #clock-cells		: from common clock binding, shall contain 1.
+- reg			: shall contain base register address and size,
+			  in the order
+			Index-0 maps to LPASS_CC register region
+			Index-1 maps to LPASS_QDSP6SS register region
+
+Optional properties :
+- reg-names	: register names of LPASS domain
+		 "cc", "qdsp6ss".
+
+Example:
+
+The below node has to be defined in the cases where the LPASS peripheral loader
+would bring the subsystem out of reset.
+
+	lpasscc: clock-controller@17014000 {
+		compatible = "qcom,sdm845-lpasscc";
+		reg = <0x17014000 0x1f004>, <0x17300000 0x200>;
+		reg-names = "cc", "qdsp6ss";
+		#clock-cells = <1>;
+	};

drivers/clk/qcom/Kconfig

@@ -276,6 +276,14 @@ config SDM_DISPCC_845
 	  Say Y if you want to support display devices and functionality such as
 	  splash screen.
 
+config SDM_LPASSCC_845
+	tristate "SDM845 Low Power Audio Subsystem (LPAAS) Clock Controller"
+	select SDM_GCC_845
+	help
+	  Support for the LPASS clock controller on SDM845 devices.
+	  Say Y if you want to use the LPASS branch clocks of the LPASS clock
+	  controller to reset the LPASS subsystem.
+
 config SPMI_PMIC_CLKDIV
 	tristate "SPMI PMIC clkdiv Support"
 	depends on SPMI || COMPILE_TEST

drivers/clk/qcom/Makefile

@@ -47,6 +47,7 @@ obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o
 obj-$(CONFIG_SDM_GCC_660) += gcc-sdm660.o
 obj-$(CONFIG_SDM_GCC_845) += gcc-sdm845.o
 obj-$(CONFIG_SDM_GPUCC_845) += gpucc-sdm845.o
+obj-$(CONFIG_SDM_LPASSCC_845) += lpasscc-sdm845.o
 obj-$(CONFIG_SDM_VIDEOCC_845) += videocc-sdm845.o
 obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
 obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o

drivers/clk/qcom/gcc-sdm845.c

@@ -3153,6 +3153,37 @@ static struct clk_branch gcc_cpuss_gnoc_clk = {
 	},
 };
 
+/* TODO: Remove after DTS updated to protect these */
+#ifdef CONFIG_SDM_LPASSCC_845
+static struct clk_branch gcc_lpass_q6_axi_clk = {
+	.halt_reg = 0x47000,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x47000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_lpass_q6_axi_clk",
+			.flags = CLK_IS_CRITICAL,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_lpass_sway_clk = {
+	.halt_reg = 0x47008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x47008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_lpass_sway_clk",
+			.flags = CLK_IS_CRITICAL,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+#endif
+
 static struct gdsc pcie_0_gdsc = {
 	.gdscr = 0x6b004,
 	.pd = {
@@ -3453,6 +3484,10 @@ static struct clk_regmap *gcc_sdm845_clocks[] = {
 	[GCC_QSPI_CORE_CLK_SRC] = &gcc_qspi_core_clk_src.clkr,
 	[GCC_QSPI_CORE_CLK] = &gcc_qspi_core_clk.clkr,
 	[GCC_QSPI_CNOC_PERIPH_AHB_CLK] = &gcc_qspi_cnoc_periph_ahb_clk.clkr,
+#ifdef CONFIG_SDM_LPASSCC_845
+	[GCC_LPASS_Q6_AXI_CLK] = &gcc_lpass_q6_axi_clk.clkr,
+	[GCC_LPASS_SWAY_CLK] = &gcc_lpass_sway_clk.clkr,
+#endif
 };
 
 static const struct qcom_reset_map gcc_sdm845_resets[] = {

drivers/clk/qcom/lpasscc-sdm845.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,lpass-sdm845.h>
+
+#include "clk-regmap.h"
+#include "clk-branch.h"
+#include "common.h"
+
+static struct clk_branch lpass_q6ss_ahbm_aon_clk = {
+	.halt_reg = 0x12000,
+	.halt_check = BRANCH_VOTED,
+	.clkr = {
+		.enable_reg = 0x12000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "lpass_q6ss_ahbm_aon_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch lpass_q6ss_ahbs_aon_clk = {
+	.halt_reg = 0x1f000,
+	.halt_check = BRANCH_VOTED,
+	.clkr = {
+		.enable_reg = 0x1f000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "lpass_q6ss_ahbs_aon_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch lpass_qdsp6ss_core_clk = {
+	.halt_reg = 0x20,
+	/* CLK_OFF would not toggle until LPASS is out of reset */
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0x20,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "lpass_qdsp6ss_core_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch lpass_qdsp6ss_xo_clk = {
+	.halt_reg = 0x38,
+	/* CLK_OFF would not toggle until LPASS is out of reset */
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0x38,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "lpass_qdsp6ss_xo_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch lpass_qdsp6ss_sleep_clk = {
+	.halt_reg = 0x3c,
+	/* CLK_OFF would not toggle until LPASS is out of reset */
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0x3c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "lpass_qdsp6ss_sleep_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct regmap_config lpass_regmap_config = {
+	.reg_bits	= 32,
+	.reg_stride	= 4,
+	.val_bits	= 32,
+	.fast_io	= true,
+};
+
+static struct clk_regmap *lpass_cc_sdm845_clocks[] = {
+	[LPASS_Q6SS_AHBM_AON_CLK] = &lpass_q6ss_ahbm_aon_clk.clkr,
+	[LPASS_Q6SS_AHBS_AON_CLK] = &lpass_q6ss_ahbs_aon_clk.clkr,
+};
+
+static const struct qcom_cc_desc lpass_cc_sdm845_desc = {
+	.config = &lpass_regmap_config,
+	.clks = lpass_cc_sdm845_clocks,
+	.num_clks = ARRAY_SIZE(lpass_cc_sdm845_clocks),
+};
+
+static struct clk_regmap *lpass_qdsp6ss_sdm845_clocks[] = {
+	[LPASS_QDSP6SS_XO_CLK] = &lpass_qdsp6ss_xo_clk.clkr,
+	[LPASS_QDSP6SS_SLEEP_CLK] = &lpass_qdsp6ss_sleep_clk.clkr,
+	[LPASS_QDSP6SS_CORE_CLK] = &lpass_qdsp6ss_core_clk.clkr,
+};
+
+static const struct qcom_cc_desc lpass_qdsp6ss_sdm845_desc = {
+	.config = &lpass_regmap_config,
+	.clks = lpass_qdsp6ss_sdm845_clocks,
+	.num_clks = ARRAY_SIZE(lpass_qdsp6ss_sdm845_clocks),
+};
+
+static int lpass_clocks_sdm845_probe(struct platform_device *pdev, int index,
+				     const struct qcom_cc_desc *desc)
+{
+	struct regmap *regmap;
+	struct resource *res;
+	void __iomem *base;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, index);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	regmap = devm_regmap_init_mmio(&pdev->dev, base, desc->config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	return qcom_cc_really_probe(pdev, desc, regmap);
+}
+
+static int lpass_cc_sdm845_probe(struct platform_device *pdev)
+{
+	const struct qcom_cc_desc *desc;
+	int ret;
+
+	lpass_regmap_config.name = "cc";
+	desc = &lpass_cc_sdm845_desc;
+
+	ret = lpass_clocks_sdm845_probe(pdev, 0, desc);
+	if (ret)
+		return ret;
+
+	lpass_regmap_config.name = "qdsp6ss";
+	desc = &lpass_qdsp6ss_sdm845_desc;
+
+	return lpass_clocks_sdm845_probe(pdev, 1, desc);
+}
+
+static const struct of_device_id lpass_cc_sdm845_match_table[] = {
+	{ .compatible = "qcom,sdm845-lpasscc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lpass_cc_sdm845_match_table);
+
+static struct platform_driver lpass_cc_sdm845_driver = {
+	.probe		= lpass_cc_sdm845_probe,
+	.driver		= {
+		.name	= "sdm845-lpasscc",
+		.of_match_table = lpass_cc_sdm845_match_table,
+	},
+};
+
+static int __init lpass_cc_sdm845_init(void)
+{
+	return platform_driver_register(&lpass_cc_sdm845_driver);
+}
+subsys_initcall(lpass_cc_sdm845_init);
+
+static void __exit lpass_cc_sdm845_exit(void)
+{
+	platform_driver_unregister(&lpass_cc_sdm845_driver);
+}
+module_exit(lpass_cc_sdm845_exit);
+
+MODULE_DESCRIPTION("QTI LPASS_CC SDM845 Driver");
+MODULE_LICENSE("GPL v2");

include/dt-bindings/clock/qcom,gcc-sdm845.h

@@ -197,6 +197,8 @@
 #define GCC_QSPI_CORE_CLK_SRC					187
 #define GCC_QSPI_CORE_CLK					188
 #define GCC_QSPI_CNOC_PERIPH_AHB_CLK				189
+#define GCC_LPASS_Q6_AXI_CLK					190
+#define GCC_LPASS_SWAY_CLK					191
 
 /* GCC Resets */
 #define GCC_MMSS_BCR						0

include/dt-bindings/clock/qcom,lpass-sdm845.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SDM_LPASS_SDM845_H
+#define _DT_BINDINGS_CLK_SDM_LPASS_SDM845_H
+
+#define LPASS_Q6SS_AHBM_AON_CLK				0
+#define LPASS_Q6SS_AHBS_AON_CLK				1
+#define LPASS_QDSP6SS_XO_CLK				2
+#define LPASS_QDSP6SS_SLEEP_CLK				3
+#define LPASS_QDSP6SS_CORE_CLK				4
+
+#endif