[NETFILTER]: Add CONFIG_NETFILTER_ADVANCED option

The NETFILTER_ADVANCED option hides lots of the rather obscure netfilter
options when disabled and provides defaults (M) that should allow to
run a distribution firewall without further thinking.

Defaults to 'y' to avoid breaking current configurations.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/Kconfig

@@ -144,9 +144,21 @@ config NETFILTER_DEBUG
 	  You can say Y here if you want to get additional messages useful in
 	  debugging the netfilter code.
 
+config NETFILTER_ADVANCED
+	bool "Advanced netfilter configuration"
+	depends on NETFILTER
+	default y
+	help
+	  If you say Y here you can select between all the netfilter modules.
+	  If you say N the more ununsual ones will not be shown and the
+	  basic ones needed by most people will default to 'M'.
+
+	  If unsure, say Y.
+
 config BRIDGE_NETFILTER
 	bool "Bridged IP/ARP packets filtering"
 	depends on BRIDGE && NETFILTER && INET
+	depends on NETFILTER_ADVANCED
 	default y
 	---help---
 	  Enabling this option will let arptables resp. iptables see bridged

net/bridge/netfilter/Kconfig

@@ -3,7 +3,7 @@
 #
 
 menu "Bridge: Netfilter Configuration"
-	depends on BRIDGE && NETFILTER
+	depends on BRIDGE && BRIDGE_NETFILTER
 
 config BRIDGE_NF_EBTABLES
 	tristate "Ethernet Bridge tables (ebtables) support"

net/decnet/netfilter/Kconfig

@@ -4,6 +4,7 @@
 
 menu "DECnet: Netfilter Configuration"
 	depends on DECNET && NETFILTER && EXPERIMENTAL
+	depends on NETFILTER_ADVANCED
 
 config DECNET_NF_GRABULATOR
 	tristate "Routing message grabulator (for userland routing daemon)"

net/ipv4/netfilter/Kconfig

@@ -8,6 +8,7 @@ menu "IP: Netfilter Configuration"
 config NF_CONNTRACK_IPV4
 	tristate "IPv4 connection tracking support (required for NAT)"
 	depends on NF_CONNTRACK
+	default m if NETFILTER_ADVANCED=n
 	---help---
 	  Connection tracking keeps a record of what packets have passed
 	  through your machine, in order to figure out how they are related
@@ -32,6 +33,7 @@ config NF_CONNTRACK_PROC_COMPAT
 
 config IP_NF_QUEUE
 	tristate "IP Userspace queueing via NETLINK (OBSOLETE)"
+	depends on NETFILTER_ADVANCED
 	help
 	  Netfilter has the ability to queue packets to user space: the
 	  netlink device can be used to access them using this driver.
@@ -44,6 +46,7 @@ config IP_NF_QUEUE
 
 config IP_NF_IPTABLES
 	tristate "IP tables support (required for filtering/masq/NAT)"
+	default m if NETFILTER_ADVANCED=n
 	select NETFILTER_XTABLES
 	help
 	  iptables is a general, extensible packet identification framework.
@@ -57,6 +60,7 @@ config IP_NF_IPTABLES
 config IP_NF_MATCH_IPRANGE
 	tristate '"iprange" match support'
 	depends on IP_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This option makes possible to match IP addresses against IP address
 	  ranges.
@@ -66,6 +70,7 @@ config IP_NF_MATCH_IPRANGE
 config IP_NF_MATCH_RECENT
 	tristate '"recent" match support'
 	depends on IP_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This match is used for creating one or many lists of recently
 	  used addresses and then matching against that/those list(s).
@@ -78,6 +83,7 @@ config IP_NF_MATCH_RECENT
 config IP_NF_MATCH_ECN
 	tristate '"ecn" match support'
 	depends on IP_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a `ECN' match, which allows you to match against
 	  the IPv4 and TCP header ECN fields.
@@ -87,6 +93,7 @@ config IP_NF_MATCH_ECN
 config IP_NF_MATCH_AH
 	tristate '"ah" match support'
 	depends on IP_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This match extension allows you to match a range of SPIs
 	  inside AH header of IPSec packets.
@@ -96,6 +103,7 @@ config IP_NF_MATCH_AH
 config IP_NF_MATCH_TTL
 	tristate '"ttl" match support'
 	depends on IP_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This adds CONFIG_IP_NF_MATCH_TTL option, which enabled the user
 	  to match packets by their TTL value.
@@ -105,6 +113,7 @@ config IP_NF_MATCH_TTL
 config IP_NF_MATCH_ADDRTYPE
 	tristate '"addrtype" address type match support'
 	depends on IP_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This option allows you to match what routing thinks of an address,
 	  eg. UNICAST, LOCAL, BROADCAST, ...
@@ -116,6 +125,7 @@ config IP_NF_MATCH_ADDRTYPE
 config IP_NF_FILTER
 	tristate "Packet filtering"
 	depends on IP_NF_IPTABLES
+	default m if NETFILTER_ADVANCED=n
 	help
 	  Packet filtering defines a table `filter', which has a series of
 	  rules for simple packet filtering at local input, forwarding and
@@ -126,6 +136,7 @@ config IP_NF_FILTER
 config IP_NF_TARGET_REJECT
 	tristate "REJECT target support"
 	depends on IP_NF_FILTER
+	default m if NETFILTER_ADVANCED=n
 	help
 	  The REJECT target allows a filtering rule to specify that an ICMP
 	  error should be issued in response to an incoming packet, rather
@@ -136,6 +147,7 @@ config IP_NF_TARGET_REJECT
 config IP_NF_TARGET_LOG
 	tristate "LOG target support"
 	depends on IP_NF_IPTABLES
+	default m if NETFILTER_ADVANCED=n
 	help
 	  This option adds a `LOG' target, which allows you to create rules in
 	  any iptables table which records the packet header to the syslog.
@@ -145,6 +157,7 @@ config IP_NF_TARGET_LOG
 config IP_NF_TARGET_ULOG
 	tristate "ULOG target support"
 	depends on IP_NF_IPTABLES
+	default m if NETFILTER_ADVANCED=n
 	---help---
 
 	  This option enables the old IPv4-only "ipt_ULOG" implementation
@@ -165,6 +178,7 @@ config IP_NF_TARGET_ULOG
 config NF_NAT
 	tristate "Full NAT"
 	depends on IP_NF_IPTABLES && NF_CONNTRACK_IPV4
+	default m if NETFILTER_ADVANCED=n
 	help
 	  The Full NAT option allows masquerading, port forwarding and other
 	  forms of full Network Address Port Translation.  It is controlled by
@@ -180,6 +194,7 @@ config NF_NAT_NEEDED
 config IP_NF_TARGET_MASQUERADE
 	tristate "MASQUERADE target support"
 	depends on NF_NAT
+	default m if NETFILTER_ADVANCED=n
 	help
 	  Masquerading is a special case of NAT: all outgoing connections are
 	  changed to seem to come from a particular interface's address, and
@@ -192,6 +207,7 @@ config IP_NF_TARGET_MASQUERADE
 config IP_NF_TARGET_REDIRECT
 	tristate "REDIRECT target support"
 	depends on NF_NAT
+	depends on NETFILTER_ADVANCED
 	help
 	  REDIRECT is a special case of NAT: all incoming connections are
 	  mapped onto the incoming interface's address, causing the packets to
@@ -203,6 +219,7 @@ config IP_NF_TARGET_REDIRECT
 config IP_NF_TARGET_NETMAP
 	tristate "NETMAP target support"
 	depends on NF_NAT
+	depends on NETFILTER_ADVANCED
 	help
 	  NETMAP is an implementation of static 1:1 NAT mapping of network
 	  addresses. It maps the network address part, while keeping the host
@@ -214,6 +231,7 @@ config IP_NF_TARGET_NETMAP
 config NF_NAT_SNMP_BASIC
 	tristate "Basic SNMP-ALG support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && NF_NAT
+	depends on NETFILTER_ADVANCED
 	---help---
 
 	  This module implements an Application Layer Gateway (ALG) for
@@ -277,6 +295,7 @@ config NF_NAT_SIP
 config IP_NF_MANGLE
 	tristate "Packet mangling"
 	depends on IP_NF_IPTABLES
+	default m if NETFILTER_ADVANCED=n
 	help
 	  This option adds a `mangle' table to iptables: see the man page for
 	  iptables(8).  This table is used for various packet alterations
@@ -287,6 +306,7 @@ config IP_NF_MANGLE
 config IP_NF_TARGET_ECN
 	tristate "ECN target support"
 	depends on IP_NF_MANGLE
+	depends on NETFILTER_ADVANCED
 	---help---
 	  This option adds a `ECN' target, which can be used in the iptables mangle
 	  table.  
@@ -301,6 +321,7 @@ config IP_NF_TARGET_ECN
 config IP_NF_TARGET_TTL
 	tristate  'TTL target support'
 	depends on IP_NF_MANGLE
+	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a `TTL' target, which enables the user to modify
 	  the TTL value of the IP header.
@@ -316,6 +337,7 @@ config IP_NF_TARGET_CLUSTERIP
 	tristate "CLUSTERIP target support (EXPERIMENTAL)"
 	depends on IP_NF_MANGLE && EXPERIMENTAL
 	depends on NF_CONNTRACK_IPV4
+	depends on NETFILTER_ADVANCED
 	select NF_CONNTRACK_MARK
 	help
 	  The CLUSTERIP target allows you to build load-balancing clusters of
@@ -328,6 +350,7 @@ config IP_NF_TARGET_CLUSTERIP
 config IP_NF_RAW
 	tristate  'raw table support (required for NOTRACK/TRACE)'
 	depends on IP_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a `raw' table to iptables. This table is the very
 	  first in the netfilter framework and hooks in at the PREROUTING
@@ -340,6 +363,7 @@ config IP_NF_RAW
 config IP_NF_ARPTABLES
 	tristate "ARP tables support"
 	select NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  arptables is a general, extensible packet identification framework.
 	  The ARP packet filtering and mangling (manipulation)subsystems

net/ipv6/netfilter/Kconfig

@@ -8,6 +8,7 @@ menu "IPv6: Netfilter Configuration (EXPERIMENTAL)"
 config NF_CONNTRACK_IPV6
 	tristate "IPv6 connection tracking support (EXPERIMENTAL)"
 	depends on INET && IPV6 && EXPERIMENTAL && NF_CONNTRACK
+	default m if NETFILTER_ADVANCED=n
 	---help---
 	  Connection tracking keeps a record of what packets have passed
 	  through your machine, in order to figure out how they are related
@@ -22,6 +23,7 @@ config NF_CONNTRACK_IPV6
 config IP6_NF_QUEUE
 	tristate "IP6 Userspace queueing via NETLINK (OBSOLETE)"
 	depends on INET && IPV6 && NETFILTER && EXPERIMENTAL
+	depends on NETFILTER_ADVANCED
 	---help---
 
 	  This option adds a queue handler to the kernel for IPv6
@@ -44,6 +46,7 @@ config IP6_NF_IPTABLES
 	tristate "IP6 tables support (required for filtering)"
 	depends on INET && IPV6 && EXPERIMENTAL
 	select NETFILTER_XTABLES
+	default m if NETFILTER_ADVANCED=n
 	help
 	  ip6tables is a general, extensible packet identification framework.
 	  Currently only the packet filtering and packet mangling subsystem
@@ -56,6 +59,7 @@ config IP6_NF_IPTABLES
 config IP6_NF_MATCH_RT
 	tristate '"rt" Routing header match support'
 	depends on IP6_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  rt matching allows you to match packets based on the routing
 	  header of the packet.
@@ -65,6 +69,7 @@ config IP6_NF_MATCH_RT
 config IP6_NF_MATCH_OPTS
 	tristate '"hopbyhop" and "dst" opts header match support'
 	depends on IP6_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This allows one to match packets based on the hop-by-hop
 	  and destination options headers of a packet.
@@ -74,6 +79,7 @@ config IP6_NF_MATCH_OPTS
 config IP6_NF_MATCH_FRAG
 	tristate '"frag" Fragmentation header match support'
 	depends on IP6_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  frag matching allows you to match packets based on the fragmentation
 	  header of the packet.
@@ -83,6 +89,7 @@ config IP6_NF_MATCH_FRAG
 config IP6_NF_MATCH_HL
 	tristate '"hl" match support'
 	depends on IP6_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  HL matching allows you to match packets based on the hop
 	  limit of the packet.
@@ -92,6 +99,7 @@ config IP6_NF_MATCH_HL
 config IP6_NF_MATCH_IPV6HEADER
 	tristate '"ipv6header" IPv6 Extension Headers Match'
 	depends on IP6_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This module allows one to match packets based upon
 	  the ipv6 extension headers.
@@ -101,6 +109,7 @@ config IP6_NF_MATCH_IPV6HEADER
 config IP6_NF_MATCH_AH
 	tristate '"ah" match support'
 	depends on IP6_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This module allows one to match AH packets.
 
@@ -109,6 +118,7 @@ config IP6_NF_MATCH_AH
 config IP6_NF_MATCH_MH
 	tristate '"mh" match support'
 	depends on IP6_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This module allows one to match MH packets.
 
@@ -117,6 +127,7 @@ config IP6_NF_MATCH_MH
 config IP6_NF_MATCH_EUI64
 	tristate '"eui64" address check'
 	depends on IP6_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This module performs checking on the IPv6 source address
 	  Compares the last 64 bits with the EUI64 (delivered
@@ -128,6 +139,7 @@ config IP6_NF_MATCH_EUI64
 config IP6_NF_FILTER
 	tristate "Packet filtering"
 	depends on IP6_NF_IPTABLES
+	default m if NETFILTER_ADVANCED=n
 	help
 	  Packet filtering defines a table `filter', which has a series of
 	  rules for simple packet filtering at local input, forwarding and
@@ -138,6 +150,7 @@ config IP6_NF_FILTER
 config IP6_NF_TARGET_LOG
 	tristate "LOG target support"
 	depends on IP6_NF_FILTER
+	default m if NETFILTER_ADVANCED=n
 	help
 	  This option adds a `LOG' target, which allows you to create rules in
 	  any iptables table which records the packet header to the syslog.
@@ -147,6 +160,7 @@ config IP6_NF_TARGET_LOG
 config IP6_NF_TARGET_REJECT
 	tristate "REJECT target support"
 	depends on IP6_NF_FILTER
+	default m if NETFILTER_ADVANCED=n
 	help
 	  The REJECT target allows a filtering rule to specify that an ICMPv6
 	  error should be issued in response to an incoming packet, rather
@@ -157,6 +171,7 @@ config IP6_NF_TARGET_REJECT
 config IP6_NF_MANGLE
 	tristate "Packet mangling"
 	depends on IP6_NF_IPTABLES
+	default m if NETFILTER_ADVANCED=n
 	help
 	  This option adds a `mangle' table to iptables: see the man page for
 	  iptables(8).  This table is used for various packet alterations
@@ -167,6 +182,7 @@ config IP6_NF_MANGLE
 config IP6_NF_TARGET_HL
 	tristate  'HL (hoplimit) target support'
 	depends on IP6_NF_MANGLE
+	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a `HL' target, which enables the user to decrement
 	  the hoplimit value of the IPv6 header or set it to a given (lower)
@@ -183,6 +199,7 @@ config IP6_NF_TARGET_HL
 config IP6_NF_RAW
 	tristate  'raw table support (required for TRACE)'
 	depends on IP6_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a `raw' table to ip6tables. This table is the very
 	  first in the netfilter framework and hooks in at the PREROUTING

net/netfilter/Kconfig

@@ -6,6 +6,7 @@ config NETFILTER_NETLINK
 
 config NETFILTER_NETLINK_QUEUE
 	tristate "Netfilter NFQUEUE over NFNETLINK interface"
+	depends on NETFILTER_ADVANCED
 	select NETFILTER_NETLINK
 	help
 	  If this option is enabled, the kernel will include support
@@ -13,6 +14,7 @@ config NETFILTER_NETLINK_QUEUE
 	  
 config NETFILTER_NETLINK_LOG
 	tristate "Netfilter LOG over NFNETLINK interface"
+	default m if NETFILTER_ADVANCED=n
 	select NETFILTER_NETLINK
 	help
 	  If this option is enabled, the kernel will include support
@@ -24,6 +26,7 @@ config NETFILTER_NETLINK_LOG
 
 config NF_CONNTRACK
 	tristate "Netfilter connection tracking support"
+	default m if NETFILTER_ADVANCED=n
 	help
 	  Connection tracking keeps a record of what packets have passed
 	  through your machine, in order to figure out how they are related
@@ -38,6 +41,7 @@ config NF_CONNTRACK
 
 config NF_CT_ACCT
 	bool "Connection tracking flow accounting"
+	depends on NETFILTER_ADVANCED
 	depends on NF_CONNTRACK
 	help
 	  If this option is enabled, the connection tracking code will
@@ -50,6 +54,7 @@ config NF_CT_ACCT
 
 config NF_CONNTRACK_MARK
 	bool  'Connection mark tracking support'
+	depends on NETFILTER_ADVANCED
 	depends on NF_CONNTRACK
 	help
 	  This option enables support for connection marks, used by the
@@ -60,6 +65,7 @@ config NF_CONNTRACK_MARK
 config NF_CONNTRACK_SECMARK
 	bool  'Connection tracking security mark support'
 	depends on NF_CONNTRACK && NETWORK_SECMARK
+	default m if NETFILTER_ADVANCED=n
 	help
 	  This option enables security markings to be applied to
 	  connections.  Typically they are copied to connections from
@@ -72,6 +78,7 @@ config NF_CONNTRACK_SECMARK
 config NF_CONNTRACK_EVENTS
 	bool "Connection tracking events (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && NF_CONNTRACK
+	depends on NETFILTER_ADVANCED
 	help
 	  If this option is enabled, the connection tracking code will
 	  provide a notifier chain that can be used by other kernel code
@@ -86,7 +93,7 @@ config NF_CT_PROTO_GRE
 config NF_CT_PROTO_SCTP
 	tristate 'SCTP protocol connection tracking support (EXPERIMENTAL)'
 	depends on EXPERIMENTAL && NF_CONNTRACK
-	default n
+	depends on NETFILTER_ADVANCED
 	help
 	  With this option enabled, the layer 3 independent connection
 	  tracking code will be able to do state tracking on SCTP connections.
@@ -97,6 +104,7 @@ config NF_CT_PROTO_SCTP
 config NF_CT_PROTO_UDPLITE
 	tristate 'UDP-Lite protocol connection tracking support (EXPERIMENTAL)'
 	depends on EXPERIMENTAL && NF_CONNTRACK
+	depends on NETFILTER_ADVANCED
 	help
 	  With this option enabled, the layer 3 independent connection
 	  tracking code will be able to do state tracking on UDP-Lite
@@ -107,6 +115,7 @@ config NF_CT_PROTO_UDPLITE
 config NF_CONNTRACK_AMANDA
 	tristate "Amanda backup protocol support"
 	depends on NF_CONNTRACK
+	depends on NETFILTER_ADVANCED
 	select TEXTSEARCH
 	select TEXTSEARCH_KMP
 	help
@@ -122,6 +131,7 @@ config NF_CONNTRACK_AMANDA
 config NF_CONNTRACK_FTP
 	tristate "FTP protocol support"
 	depends on NF_CONNTRACK
+	default m if NETFILTER_ADVANCED=n
 	help
 	  Tracking FTP connections is problematic: special helpers are
 	  required for tracking them, and doing masquerading and other forms
@@ -136,6 +146,7 @@ config NF_CONNTRACK_FTP
 config NF_CONNTRACK_H323
 	tristate "H.323 protocol support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && NF_CONNTRACK && (IPV6 || IPV6=n)
+	depends on NETFILTER_ADVANCED
 	help
 	  H.323 is a VoIP signalling protocol from ITU-T. As one of the most
 	  important VoIP protocols, it is widely used by voice hardware and
@@ -155,6 +166,7 @@ config NF_CONNTRACK_H323
 config NF_CONNTRACK_IRC
 	tristate "IRC protocol support"
 	depends on NF_CONNTRACK
+	default m if NETFILTER_ADVANCED=n
 	help
 	  There is a commonly-used extension to IRC called
 	  Direct Client-to-Client Protocol (DCC).  This enables users to send
@@ -170,6 +182,7 @@ config NF_CONNTRACK_IRC
 config NF_CONNTRACK_NETBIOS_NS
 	tristate "NetBIOS name service protocol support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && NF_CONNTRACK
+	depends on NETFILTER_ADVANCED
 	help
 	  NetBIOS name service requests are sent as broadcast messages from an
 	  unprivileged port and responded to with unicast messages to the
@@ -189,6 +202,7 @@ config NF_CONNTRACK_NETBIOS_NS
 config NF_CONNTRACK_PPTP
 	tristate "PPtP protocol support"
 	depends on NF_CONNTRACK
+	depends on NETFILTER_ADVANCED
 	select NF_CT_PROTO_GRE
 	help
 	  This module adds support for PPTP (Point to Point Tunnelling
@@ -208,6 +222,7 @@ config NF_CONNTRACK_PPTP
 config NF_CONNTRACK_SANE
 	tristate "SANE protocol support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && NF_CONNTRACK
+	depends on NETFILTER_ADVANCED
 	help
 	  SANE is a protocol for remote access to scanners as implemented
 	  by the 'saned' daemon. Like FTP, it uses separate control and
@@ -221,6 +236,7 @@ config NF_CONNTRACK_SANE
 config NF_CONNTRACK_SIP
 	tristate "SIP protocol support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && NF_CONNTRACK
+	default m if NETFILTER_ADVANCED=n
 	help
 	  SIP is an application-layer control protocol that can establish,
 	  modify, and terminate multimedia sessions (conferences) such as
@@ -233,6 +249,7 @@ config NF_CONNTRACK_SIP
 config NF_CONNTRACK_TFTP
 	tristate "TFTP protocol support"
 	depends on NF_CONNTRACK
+	depends on NETFILTER_ADVANCED
 	help
 	  TFTP connection tracking helper, this is required depending
 	  on how restrictive your ruleset is.
@@ -246,11 +263,13 @@ config NF_CT_NETLINK
 	depends on EXPERIMENTAL && NF_CONNTRACK
 	select NETFILTER_NETLINK
 	depends on NF_NAT=n || NF_NAT
+	default m if NETFILTER_ADVANCED=n
 	help
 	  This option enables support for a netlink-based userspace interface
 
 config NETFILTER_XTABLES
 	tristate "Netfilter Xtables support (required for ip_tables)"
+	default m if NETFILTER_ADVANCED=n
 	help
 	  This is required if you intend to use any of ip_tables,
 	  ip6_tables or arp_tables.
@@ -260,6 +279,7 @@ config NETFILTER_XTABLES
 config NETFILTER_XT_TARGET_CLASSIFY
 	tristate '"CLASSIFY" target support'
 	depends on NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a `CLASSIFY' target, which enables the user to set
 	  the priority of a packet. Some qdiscs can use this value for
@@ -274,6 +294,7 @@ config NETFILTER_XT_TARGET_CONNMARK
 	depends on NETFILTER_XTABLES
 	depends on IP_NF_MANGLE || IP6_NF_MANGLE
 	depends on NF_CONNTRACK
+	depends on NETFILTER_ADVANCED
 	select NF_CONNTRACK_MARK
 	help
 	  This option adds a `CONNMARK' target, which allows one to manipulate
@@ -288,6 +309,7 @@ config NETFILTER_XT_TARGET_DSCP
 	tristate '"DSCP" and "TOS" target support'
 	depends on NETFILTER_XTABLES
 	depends on IP_NF_MANGLE || IP6_NF_MANGLE
+	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a `DSCP' target, which allows you to manipulate
 	  the IPv4/IPv6 header DSCP field (differentiated services codepoint).
@@ -303,6 +325,7 @@ config NETFILTER_XT_TARGET_DSCP
 config NETFILTER_XT_TARGET_MARK
 	tristate '"MARK" target support'
 	depends on NETFILTER_XTABLES
+	default m if NETFILTER_ADVANCED=n
 	help
 	  This option adds a `MARK' target, which allows you to create rules
 	  in the `mangle' table which alter the netfilter mark (nfmark) field
@@ -316,6 +339,7 @@ config NETFILTER_XT_TARGET_MARK
 config NETFILTER_XT_TARGET_NFQUEUE
 	tristate '"NFQUEUE" target Support'
 	depends on NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This target replaced the old obsolete QUEUE target.
 
@@ -327,6 +351,7 @@ config NETFILTER_XT_TARGET_NFQUEUE
 config NETFILTER_XT_TARGET_NFLOG
 	tristate '"NFLOG" target support'
 	depends on NETFILTER_XTABLES
+	default m if NETFILTER_ADVANCED=n
 	help
 	  This option enables the NFLOG target, which allows to LOG
 	  messages through the netfilter logging API, which can use
@@ -340,6 +365,7 @@ config NETFILTER_XT_TARGET_NOTRACK
 	depends on NETFILTER_XTABLES
 	depends on IP_NF_RAW || IP6_NF_RAW
 	depends on NF_CONNTRACK
+	depends on NETFILTER_ADVANCED
 	help
 	  The NOTRACK target allows a select rule to specify
 	  which packets *not* to enter the conntrack/NAT
@@ -363,6 +389,7 @@ config NETFILTER_XT_TARGET_TRACE
 	tristate  '"TRACE" target support'
 	depends on NETFILTER_XTABLES
 	depends on IP_NF_RAW || IP6_NF_RAW
+	depends on NETFILTER_ADVANCED
 	help
 	  The TRACE target allows you to mark packets so that the kernel
 	  will log every rule which match the packets as those traverse
@@ -374,6 +401,7 @@ config NETFILTER_XT_TARGET_TRACE
 config NETFILTER_XT_TARGET_SECMARK
 	tristate '"SECMARK" target support'
 	depends on NETFILTER_XTABLES && NETWORK_SECMARK
+	default m if NETFILTER_ADVANCED=n
 	help
 	  The SECMARK target allows security marking of network
 	  packets, for use with security subsystems.
@@ -383,6 +411,7 @@ config NETFILTER_XT_TARGET_SECMARK
 config NETFILTER_XT_TARGET_CONNSECMARK
 	tristate '"CONNSECMARK" target support'
 	depends on NETFILTER_XTABLES && NF_CONNTRACK && NF_CONNTRACK_SECMARK
+	default m if NETFILTER_ADVANCED=n
 	help
 	  The CONNSECMARK target copies security markings from packets
 	  to connections, and restores security markings from connections
@@ -394,6 +423,7 @@ config NETFILTER_XT_TARGET_CONNSECMARK
 config NETFILTER_XT_TARGET_TCPMSS
 	tristate '"TCPMSS" target support'
 	depends on NETFILTER_XTABLES && (IPV6 || IPV6=n)
+	default m if NETFILTER_ADVANCED=n
 	---help---
 	  This option adds a `TCPMSS' target, which allows you to alter the
 	  MSS value of TCP SYN packets, to control the maximum size for that
@@ -421,6 +451,7 @@ config NETFILTER_XT_TARGET_TCPOPTSTRIP
 	tristate '"TCPOPTSTRIP" target support (EXPERIMENTAL)'
 	depends on EXPERIMENTAL && NETFILTER_XTABLES
 	depends on IP_NF_MANGLE || IP6_NF_MANGLE
+	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a "TCPOPTSTRIP" target, which allows you to strip
 	  TCP options from TCP packets.
@@ -428,6 +459,7 @@ config NETFILTER_XT_TARGET_TCPOPTSTRIP
 config NETFILTER_XT_MATCH_COMMENT
 	tristate  '"comment" match support'
 	depends on NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a `comment' dummy-match, which allows you to put
 	  comments in your iptables ruleset.
@@ -439,6 +471,7 @@ config NETFILTER_XT_MATCH_CONNBYTES
 	tristate  '"connbytes" per-connection counter match support'
 	depends on NETFILTER_XTABLES
 	depends on NF_CONNTRACK
+	depends on NETFILTER_ADVANCED
 	select NF_CT_ACCT
 	help
 	  This option adds a `connbytes' match, which allows you to match the
@@ -451,6 +484,7 @@ config NETFILTER_XT_MATCH_CONNLIMIT
 	tristate '"connlimit" match support"'
 	depends on NETFILTER_XTABLES
 	depends on NF_CONNTRACK
+	depends on NETFILTER_ADVANCED
 	---help---
 	  This match allows you to match against the number of parallel
 	  connections to a server per client IP address (or address block).
@@ -459,6 +493,7 @@ config NETFILTER_XT_MATCH_CONNMARK
 	tristate  '"connmark" connection mark match support'
 	depends on NETFILTER_XTABLES
 	depends on NF_CONNTRACK
+	depends on NETFILTER_ADVANCED
 	select NF_CONNTRACK_MARK
 	help
 	  This option adds a `connmark' match, which allows you to match the
@@ -472,6 +507,7 @@ config NETFILTER_XT_MATCH_CONNTRACK
 	tristate '"conntrack" connection tracking match support'
 	depends on NETFILTER_XTABLES
 	depends on NF_CONNTRACK
+	default m if NETFILTER_ADVANCED=n
 	help
 	  This is a general conntrack match module, a superset of the state match.
 
@@ -484,6 +520,7 @@ config NETFILTER_XT_MATCH_CONNTRACK
 config NETFILTER_XT_MATCH_DCCP
 	tristate '"dccp" protocol match support'
 	depends on NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  With this option enabled, you will be able to use the iptables
 	  `dccp' match in order to match on DCCP source/destination ports
@@ -495,6 +532,7 @@ config NETFILTER_XT_MATCH_DCCP
 config NETFILTER_XT_MATCH_DSCP
 	tristate '"dscp" and "tos" match support'
 	depends on NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a `DSCP' match, which allows you to match against
 	  the IPv4/IPv6 header DSCP field (differentiated services codepoint).
@@ -510,6 +548,7 @@ config NETFILTER_XT_MATCH_DSCP
 config NETFILTER_XT_MATCH_ESP
 	tristate '"esp" match support'
 	depends on NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This match extension allows you to match a range of SPIs
 	  inside ESP header of IPSec packets.
@@ -520,6 +559,7 @@ config NETFILTER_XT_MATCH_HELPER
 	tristate '"helper" match support'
 	depends on NETFILTER_XTABLES
 	depends on NF_CONNTRACK
+	depends on NETFILTER_ADVANCED
 	help
 	  Helper matching allows you to match packets in dynamic connections
 	  tracked by a conntrack-helper, ie. ip_conntrack_ftp
@@ -529,6 +569,7 @@ config NETFILTER_XT_MATCH_HELPER
 config NETFILTER_XT_MATCH_LENGTH
 	tristate '"length" match support'
 	depends on NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This option allows you to match the length of a packet against a
 	  specific value or range of values.
@@ -538,6 +579,7 @@ config NETFILTER_XT_MATCH_LENGTH
 config NETFILTER_XT_MATCH_LIMIT
 	tristate '"limit" match support'
 	depends on NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  limit matching allows you to control the rate at which a rule can be
 	  matched: mainly useful in combination with the LOG target ("LOG
@@ -548,6 +590,7 @@ config NETFILTER_XT_MATCH_LIMIT
 config NETFILTER_XT_MATCH_MAC
 	tristate '"mac" address match support'
 	depends on NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  MAC matching allows you to match packets based on the source
 	  Ethernet address of the packet.
@@ -557,6 +600,7 @@ config NETFILTER_XT_MATCH_MAC
 config NETFILTER_XT_MATCH_MARK
 	tristate '"mark" match support'
 	depends on NETFILTER_XTABLES
+	default m if NETFILTER_ADVANCED=n
 	help
 	  Netfilter mark matching allows you to match packets based on the
 	  `nfmark' value in the packet.  This can be set by the MARK target
@@ -567,6 +611,7 @@ config NETFILTER_XT_MATCH_MARK
 config NETFILTER_XT_MATCH_OWNER
 	tristate '"owner" match support'
 	depends on NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
 	---help---
 	Socket owner matching allows you to match locally-generated packets
 	based on who created the socket: the user or group. It is also
@@ -575,6 +620,7 @@ config NETFILTER_XT_MATCH_OWNER
 config NETFILTER_XT_MATCH_POLICY
 	tristate 'IPsec "policy" match support'
 	depends on NETFILTER_XTABLES && XFRM
+	default m if NETFILTER_ADVANCED=n
 	help
 	  Policy matching allows you to match packets based on the
 	  IPsec policy that was used during decapsulation/will
@@ -585,6 +631,7 @@ config NETFILTER_XT_MATCH_POLICY
 config NETFILTER_XT_MATCH_MULTIPORT
 	tristate '"multiport" Multiple port match support'
 	depends on NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  Multiport matching allows you to match TCP or UDP packets based on
 	  a series of source or destination ports: normally a rule can only
@@ -595,6 +642,7 @@ config NETFILTER_XT_MATCH_MULTIPORT
 config NETFILTER_XT_MATCH_PHYSDEV
 	tristate '"physdev" match support'
 	depends on NETFILTER_XTABLES && BRIDGE && BRIDGE_NETFILTER
+	depends on NETFILTER_ADVANCED
 	help
 	  Physdev packet matching matches against the physical bridge ports
 	  the IP packet arrived on or will leave by.
@@ -604,6 +652,7 @@ config NETFILTER_XT_MATCH_PHYSDEV
 config NETFILTER_XT_MATCH_PKTTYPE
 	tristate '"pkttype" packet type match support'
 	depends on NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  Packet type matching allows you to match a packet by
 	  its "class", eg. BROADCAST, MULTICAST, ...
@@ -616,6 +665,7 @@ config NETFILTER_XT_MATCH_PKTTYPE
 config NETFILTER_XT_MATCH_QUOTA
 	tristate '"quota" match support'
 	depends on NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a `quota' match, which allows to match on a
 	  byte counter.
@@ -636,6 +686,7 @@ config NETFILTER_XT_MATCH_RATEEST
 config NETFILTER_XT_MATCH_REALM
 	tristate  '"realm" match support'
 	depends on NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
 	select NET_CLS_ROUTE
 	help
 	  This option adds a `realm' match, which allows you to use the realm
@@ -650,6 +701,7 @@ config NETFILTER_XT_MATCH_REALM
 config NETFILTER_XT_MATCH_SCTP
 	tristate  '"sctp" protocol match support (EXPERIMENTAL)'
 	depends on NETFILTER_XTABLES && EXPERIMENTAL
+	depends on NETFILTER_ADVANCED
 	help
 	  With this option enabled, you will be able to use the 
 	  `sctp' match in order to match on SCTP source/destination ports
@@ -662,6 +714,7 @@ config NETFILTER_XT_MATCH_STATE
 	tristate '"state" match support'
 	depends on NETFILTER_XTABLES
 	depends on NF_CONNTRACK
+	default m if NETFILTER_ADVANCED=n
 	help
 	  Connection state matching allows you to match packets based on their
 	  relationship to a tracked connection (ie. previous packets).  This
@@ -672,6 +725,7 @@ config NETFILTER_XT_MATCH_STATE
 config NETFILTER_XT_MATCH_STATISTIC
 	tristate '"statistic" match support'
 	depends on NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a `statistic' match, which allows you to match
 	  on packets periodically or randomly with a given percentage.
@@ -681,6 +735,7 @@ config NETFILTER_XT_MATCH_STATISTIC
 config NETFILTER_XT_MATCH_STRING
 	tristate  '"string" match support'
 	depends on NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
 	select TEXTSEARCH
 	select TEXTSEARCH_KMP
 	select TEXTSEARCH_BM
@@ -694,6 +749,7 @@ config NETFILTER_XT_MATCH_STRING
 config NETFILTER_XT_MATCH_TCPMSS
 	tristate '"tcpmss" match support'
 	depends on NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a `tcpmss' match, which allows you to examine the
 	  MSS value of TCP SYN packets, which control the maximum packet size
@@ -704,6 +760,7 @@ config NETFILTER_XT_MATCH_TCPMSS
 config NETFILTER_XT_MATCH_TIME
 	tristate '"time" match support'
 	depends on NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
 	---help---
 	  This option adds a "time" match, which allows you to match based on
 	  the packet arrival time (at the machine which netfilter is running)
@@ -718,6 +775,7 @@ config NETFILTER_XT_MATCH_TIME
 config NETFILTER_XT_MATCH_U32
 	tristate '"u32" match support'
 	depends on NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
 	---help---
 	  u32 allows you to extract quantities of up to 4 bytes from a packet,
 	  AND them with specified masks, shift them by specified amounts and
@@ -731,6 +789,7 @@ config NETFILTER_XT_MATCH_U32
 config NETFILTER_XT_MATCH_HASHLIMIT
 	tristate '"hashlimit" match support'
 	depends on NETFILTER_XTABLES && (IP6_NF_IPTABLES || IP6_NF_IPTABLES=n)
+	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a `hashlimit' match.