docs: Fix more broken references

As we move stuff around, some doc references are broken. Fix some of
them via this script:
	./scripts/documentation-file-ref-check --fix

Manually checked that produced results are valid.
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>

Documentation/devicetree/bindings/clock/st/st,clkgen.txt

@@ -31,10 +31,10 @@ This binding uses the common clock binding[1].
 Each subnode should use the binding described in [2]..[7]
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
-[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
-[7] Documentation/devicetree/bindings/clock/st,quadfs.txt
-[8] Documentation/devicetree/bindings/clock/st,flexgen.txt
+[3] Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
+[4] Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+[7] Documentation/devicetree/bindings/clock/st/st,quadfs.txt
+[8] Documentation/devicetree/bindings/clock/st/st,flexgen.txt
 
 
 Required properties:

Documentation/devicetree/bindings/clock/ti/gate.txt

@@ -10,7 +10,7 @@ will be controlled instead and the corresponding hw-ops for
 that is used.
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/gate-clock.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
 [3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
 
 Required properties:

Documentation/devicetree/bindings/clock/ti/interface.txt

@@ -9,7 +9,7 @@ companion clock finding (match corresponding functional gate
 clock) and hardware autoidle enable / disable.
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/gate-clock.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
 
 Required properties:
 - compatible : shall be one of:

Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt

@@ -8,7 +8,7 @@ Required properties:
 	"intermediate"	- A parent of "cpu" clock which is used as "intermediate" clock
 			  source (usually MAINPLL) when the original CPU PLL is under
 			  transition and not stable yet.
-	Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
+	Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for
 	generic clock consumer properties.
 - operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt
 	for detail.

Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt

@@ -12,7 +12,7 @@ Required properties:
 - clocks:		 Phandles for clock specified in "clock-names" property
 - clock-names :		 The name of clock used by the DFI, must be
 			 "pclk_ddr_mon";
-- operating-points-v2:	 Refer to Documentation/devicetree/bindings/power/opp.txt
+- operating-points-v2:	 Refer to Documentation/devicetree/bindings/opp/opp.txt
 			 for details.
 - center-supply:	 DMC supply node.
 - status:		 Marks the node enabled/disabled.

Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt

@@ -34,7 +34,7 @@ Optional properties:
 - mali-supply : Phandle to regulator for the Mali device. Refer to
   Documentation/devicetree/bindings/regulator/regulator.txt for details.
 
-- operating-points-v2 : Refer to Documentation/devicetree/bindings/power/opp.txt
+- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt
   for details.
 
 

Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt

@@ -44,7 +44,7 @@ Optional properties:
 
   - memory-region:
     Memory region to allocate from, as defined in
-    Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt
+    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
 
   - mali-supply:
     Phandle to regulator for the Mali device, as defined in

Documentation/devicetree/bindings/mfd/mt6397.txt

@@ -12,7 +12,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
 It is interfaced to host controller using SPI interface by a proprietary hardware
 called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
 See the following for pwarp node definitions:
-Documentation/devicetree/bindings/soc/pwrap.txt
+Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
 
 This document describes the binding for MFD device and its sub module.
 

Documentation/devicetree/bindings/mfd/sun6i-prcm.txt

@@ -9,7 +9,7 @@ Required properties:
 
 The prcm node may contain several subdevices definitions:
  - see Documentation/devicetree/clk/sunxi.txt for clock devices
- - see Documentation/devicetree/reset/allwinner,sunxi-clock-reset.txt for reset
+ - see Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt for reset
    controller devices
 
 

Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt

@@ -62,7 +62,7 @@ Required properties for a slot (Deprecated - Recommend to use one slot per host)
   rest of the gpios (depending on the bus-width property) are the data lines in
   no particular order. The format of the gpio specifier depends on the gpio
   controller.
-(Deprecated - Refer to Documentation/devicetree/binding/pinctrl/samsung-pinctrl.txt)
+(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt)
 
 Example:
 

Documentation/devicetree/bindings/net/dsa/ksz.txt

@@ -6,7 +6,7 @@ Required properties:
 - compatible: For external switch chips, compatible string must be exactly one
   of: "microchip,ksz9477"
 
-See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
+See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
 required and optional properties.
 
 Examples:

Documentation/devicetree/bindings/net/dsa/mt7530.txt

@@ -31,7 +31,7 @@ Required properties for the child nodes within ports container:
 - phy-mode: String, must be either "trgmii" or "rgmii" for port labeled
 	 "cpu".
 
-See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
+See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
 required, optional properties and how the integrated switch subnodes must
 be specified.
 

Documentation/devicetree/bindings/power/fsl,imx-gpc.txt

@@ -14,7 +14,7 @@ Required properties:
   datasheet
 - interrupts: Should contain one interrupt specifier for the GPC interrupt
 - clocks: Must contain an entry for each entry in clock-names.
-  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
 - clock-names: Must include the following entries:
   - ipg
 

Documentation/devicetree/bindings/power/wakeup-source.txt

@@ -22,7 +22,7 @@ List of legacy properties and respective binding document
 3. "has-tpo"			Documentation/devicetree/bindings/rtc/rtc-opal.txt
 4. "linux,wakeup"		Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
 				Documentation/devicetree/bindings/mfd/tc3589x.txt
-				Documentation/devicetree/bindings/input/ads7846.txt
+				Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
 5. "linux,keypad-wakeup"	Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
 6. "linux,input-wakeup"		Documentation/devicetree/bindings/input/samsung-keypad.txt
 7. "nvidia,wakeup-source"	Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt

Documentation/devicetree/bindings/usb/rockchip,dwc3.txt

@@ -16,7 +16,7 @@ A child node must exist to represent the core DWC3 IP block. The name of
 the node is not important. The content of the node is defined in dwc3.txt.
 
 Phy documentation is provided in the following places:
-Documentation/devicetree/bindings/phy/rockchip,dwc3-usb-phy.txt
+Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
 
 Example device nodes:
 

Documentation/hwmon/ina2xx

@@ -53,7 +53,7 @@ bus supply voltage.
 
 The shunt value in micro-ohms can be set via platform data or device tree at
 compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
-refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings
+refer to the Documentation/devicetree/bindings/hwmon/ina2xx.txt for bindings
 if the device tree is used.
 
 Additionally ina226 supports update_interval attribute as described in

Documentation/maintainer/pull-requests.rst

@@ -41,7 +41,7 @@ named ``char-misc-next``, you would be using the following command::
 
 that will create a signed tag called ``char-misc-4.15-rc1`` based on the
 last commit in the ``char-misc-next`` branch, and sign it with your gpg key
-(see :ref:`Documentation/maintainer/configure_git.rst <configuregit>`).
+(see :ref:`Documentation/maintainer/configure-git.rst <configuregit>`).
 
 Linus will only accept pull requests based on a signed tag. Other
 maintainers may differ.

Documentation/translations/ko_KR/howto.rst

@@ -160,7 +160,7 @@ mtk.manpages@gmail.com의 메인테이너에게 보낼 것을 권장한다.
     독특한 행동에 관하여 흔히 있는 오해들과 혼란들을 해소하고 있기
     때문이다.
 
-  :ref:`Documentation/process/stable_kernel_rules.rst <stable_kernel_rules>`
+  :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`
     이 문서는 안정적인 커널 배포가 이루어지는 규칙을 설명하고 있으며
     여러분들이 이러한 배포들 중 하나에 변경을 하길 원한다면
     무엇을 해야 하는지를 설명한다.

MAINTAINERS

@@ -4513,7 +4513,7 @@ DRM DRIVER FOR ILITEK ILI9225 PANELS
 M:	David Lechner <david@lechnology.com>
 S:	Maintained
 F:	drivers/gpu/drm/tinydrm/ili9225.c
-F:	Documentation/devicetree/bindings/display/ili9225.txt
+F:	Documentation/devicetree/bindings/display/ilitek,ili9225.txt
 
 DRM DRIVER FOR INTEL I810 VIDEO CARDS
 S:	Orphan / Obsolete
@@ -4599,13 +4599,13 @@ DRM DRIVER FOR SITRONIX ST7586 PANELS
 M:	David Lechner <david@lechnology.com>
 S:	Maintained
 F:	drivers/gpu/drm/tinydrm/st7586.c
-F:	Documentation/devicetree/bindings/display/st7586.txt
+F:	Documentation/devicetree/bindings/display/sitronix,st7586.txt
 
 DRM DRIVER FOR SITRONIX ST7735R PANELS
 M:	David Lechner <david@lechnology.com>
 S:	Maintained
 F:	drivers/gpu/drm/tinydrm/st7735r.c
-F:	Documentation/devicetree/bindings/display/st7735r.txt
+F:	Documentation/devicetree/bindings/display/sitronix,st7735r.txt
 
 DRM DRIVER FOR TDFX VIDEO CARDS
 S:	Orphan / Obsolete
@@ -4824,7 +4824,7 @@ M:	Eric Anholt <eric@anholt.net>
 S:	Supported
 F:	drivers/gpu/drm/v3d/
 F:	include/uapi/drm/v3d_drm.h
-F:	Documentation/devicetree/bindings/display/brcm,bcm-v3d.txt
+F:	Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
 T:	git git://anongit.freedesktop.org/drm/drm-misc
 
 DRM DRIVERS FOR VC4
@@ -5735,7 +5735,7 @@ M:	Madalin Bucur <madalin.bucur@nxp.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/freescale/fman
-F:	Documentation/devicetree/bindings/powerpc/fsl/fman.txt
+F:	Documentation/devicetree/bindings/net/fsl-fman.txt
 
 FREESCALE QORIQ PTP CLOCK DRIVER
 M:	Yangbo Lu <yangbo.lu@nxp.com>
@@ -7425,7 +7425,7 @@ M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-iio@vger.kernel.org
 S:	Maintained
 F:	drivers/iio/gyro/mpu3050*
-F:	Documentation/devicetree/bindings/iio/gyroscope/inv,mpu3050.txt
+F:	Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
 
 IOC3 ETHERNET DRIVER
 M:	Ralf Baechle <ralf@linux-mips.org>
@@ -8700,7 +8700,7 @@ M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-hwmon@vger.kernel.org
 S:	Maintained
 F:	Documentation/hwmon/max6697
-F:	Documentation/devicetree/bindings/i2c/max6697.txt
+F:	Documentation/devicetree/bindings/hwmon/max6697.txt
 F:	drivers/hwmon/max6697.c
 F:	include/linux/platform_data/max6697.h
 
@@ -9080,7 +9080,7 @@ M:	Martin Donnelly <martin.donnelly@ge.com>
 M:	Martyn Welch <martyn.welch@collabora.co.uk>
 S:	Maintained
 F:	drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
-F:	Documentation/devicetree/bindings/video/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
+F:	Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
 
 MEGARAID SCSI/SAS DRIVERS
 M:	Kashyap Desai <kashyap.desai@broadcom.com>
@@ -10728,7 +10728,7 @@ PARALLEL LCD/KEYPAD PANEL DRIVER
 M:	Willy Tarreau <willy@haproxy.com>
 M:	Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
 S:	Odd Fixes
-F:	Documentation/misc-devices/lcd-panel-cgram.txt
+F:	Documentation/auxdisplay/lcd-panel-cgram.txt
 F:	drivers/misc/panel.c
 
 PARALLEL PORT SUBSYSTEM
@@ -13291,7 +13291,7 @@ M:	Vinod Koul <vkoul@kernel.org>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 S:	Supported
-F:	Documentation/sound/alsa/compress_offload.txt
+F:	Documentation/sound/designs/compress-offload.rst
 F:	include/sound/compress_driver.h
 F:	include/uapi/sound/compress_*
 F:	sound/core/compress_offload.c

drivers/net/ethernet/intel/Kconfig

@@ -33,7 +33,7 @@ config E100
 	  to identify the adapter.
 
 	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/e100.txt>.
+	  <file:Documentation/networking/e100.rst>.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called e100.
@@ -49,7 +49,7 @@ config E1000
 	  <http://support.intel.com>
 
 	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/e1000.txt>.
+	  <file:Documentation/networking/e1000.rst>.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called e1000.
@@ -94,7 +94,7 @@ config IGB
 	  <http://support.intel.com>
 
 	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/e1000.txt>.
+	  <file:Documentation/networking/e1000.rst>.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called igb.
@@ -130,7 +130,7 @@ config IGBVF
 	  <http://support.intel.com>
 
 	  More specific information on configuring the driver is in
-	  <file:Documentation/networking/e1000.txt>.
+	  <file:Documentation/networking/e1000.rst>.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called igbvf.

drivers/soundwire/stream.c

@@ -1291,7 +1291,7 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream)
  *
  * @stream: Soundwire stream
  *
- * Documentation/soundwire/stream.txt explains this API in detail
+ * Documentation/driver-api/soundwire/stream.rst explains this API in detail
  */
 int sdw_prepare_stream(struct sdw_stream_runtime *stream)
 {
@@ -1348,7 +1348,7 @@ static int _sdw_enable_stream(struct sdw_stream_runtime *stream)
  *
  * @stream: Soundwire stream
  *
- * Documentation/soundwire/stream.txt explains this API in detail
+ * Documentation/driver-api/soundwire/stream.rst explains this API in detail
  */
 int sdw_enable_stream(struct sdw_stream_runtime *stream)
 {
@@ -1400,7 +1400,7 @@ static int _sdw_disable_stream(struct sdw_stream_runtime *stream)
  *
  * @stream: Soundwire stream
  *
- * Documentation/soundwire/stream.txt explains this API in detail
+ * Documentation/driver-api/soundwire/stream.rst explains this API in detail
  */
 int sdw_disable_stream(struct sdw_stream_runtime *stream)
 {
@@ -1456,7 +1456,7 @@ static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream)
  *
  * @stream: Soundwire stream
  *
- * Documentation/soundwire/stream.txt explains this API in detail
+ * Documentation/driver-api/soundwire/stream.rst explains this API in detail
  */
 int sdw_deprepare_stream(struct sdw_stream_runtime *stream)
 {

fs/Kconfig.binfmt

@@ -168,7 +168,7 @@ config BINFMT_MISC
 	  will automatically feed it to the correct interpreter.
 
 	  You can do other nice things, too. Read the file
-	  <file:Documentation/binfmt_misc.txt> to learn how to use this
+	  <file:Documentation/admin-guide/binfmt-misc.rst> to learn how to use this
 	  feature, <file:Documentation/admin-guide/java.rst> for information about how
 	  to include Java support. and <file:Documentation/admin-guide/mono.rst> for
           information about how to include Mono-based .NET support.

fs/binfmt_misc.c

@@ -4,7 +4,7 @@
  * Copyright (C) 1997 Richard Günther
  *
  * binfmt_misc detects binaries via a magic or filename extension and invokes
- * a specified wrapper. See Documentation/binfmt_misc.txt for more details.
+ * a specified wrapper. See Documentation/admin-guide/binfmt-misc.rst for more details.
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt