Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits)
  ARM: 5865/1: nuc900 ethernet driver needs mii
  ARM: 5864/1: Implement arch_reset() in NUC900
  ARM: 5863/1: fix bugs of clock source of NUC900
  ARM: 5858/1: Remove unused vma_vm_flags macro from v7wbi_flush_user_tlb_range
  imx/mx3: depend on USB_ULPI for otg_ulpi_create
  ARM: MX3: make CPU revision number detection work on all boards
  mx25: pdk: add platform code for FEC support
  mx25: add support for FEC on i.MX25
  mx25: s/NO_PAD_CTL/NO_PAD_CTRL/
  mx31moboard: fix usbh device names
  mx3: add support for the mt9v022 camera sensor to pcm037 platform
  mx27: mxt_td60: Remove not used UART pins
  [ARM] pxa/poodle: fix incorrect 'gpio_card_detect' of MMC
  [ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot
  [ARM] pxa/ttc_dkb: remove duplicate macro definition
  [ARM] pxa/zeus: provide power-source information when APM is enabled
  [ARM] pxa/zeus: relax memory timings on Zeus ethernet ports
  [ARM] pxa/zeus: make internal zeus_get_pcb_info static
  [ARM] pxa/littleton: select CPU_PXA300 and CPU_PXA310
  [ARM] pxa/littleton: add UART3 GPIO config
  ...

arch/arm/mach-mmp/ttc_dkb.c

@@ -24,8 +24,6 @@
 
 #include "common.h"
 
-#define ARRAY_AND_SIZE(x)       (x), ARRAY_SIZE(x)
-
 static unsigned long ttc_dkb_pin_config[] __initdata = {
 	/* UART2 */
 	GPIO47_UART2_RXD,

arch/arm/mach-mx2/mxt_td60.c

@@ -58,21 +58,6 @@ static unsigned int mxt_td60_pins[] __initdata = {
 	PE9_PF_UART3_RXD,
 	PE10_PF_UART3_CTS,
 	PE11_PF_UART3_RTS,
-	/* UART3 */
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-	/* UART4 */
-	PB18_AF_UART5_TXD,
-	PB19_AF_UART5_RXD,
-	PB20_AF_UART5_CTS,
-	PB21_AF_UART5_RTS,
-	/* UART5 */
-	PB10_AF_UART6_TXD,
-	PB12_AF_UART6_CTS,
-	PB11_AF_UART6_RXD,
-	PB13_AF_UART6_RTS,
 	/* FEC */
 	PD0_AIN_FEC_TXD0,
 	PD1_AIN_FEC_TXD1,
@@ -261,12 +246,6 @@ static struct imxuart_platform_data uart_pdata[] = {
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
 		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
 	},
 };
 
@@ -278,9 +257,6 @@ static void __init mxt_td60_board_init(void)
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
 	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
 	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
-	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
-	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
 	mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
 
 	i2c_register_board_info(0, mxt_td60_i2c_devices,

arch/arm/mach-mx25/clock.c

@@ -173,6 +173,7 @@ DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL);
 DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
 DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
 DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL);
+DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR0, 23, get_rate_ipg, NULL);
 
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
@@ -204,6 +205,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
+	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
 };
 
 int __init mx25_clocks_init(unsigned long fref)

arch/arm/mach-mx25/devices.c

@@ -419,3 +419,22 @@ int __init mxc_register_gpios(void)
 	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
 }
 
+static struct resource mx25_fec_resources[] = {
+	{
+		.start	= MX25_FEC_BASE_ADDR,
+		.end	= MX25_FEC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_FEC,
+		.end	= MX25_INT_FEC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mx25_fec_device = {
+	.name	= "fec",
+	.id	= 0,
+	.num_resources	= ARRAY_SIZE(mx25_fec_resources),
+	.resource	= mx25_fec_resources,
+};

arch/arm/mach-mx25/devices.h

@@ -17,3 +17,4 @@ extern struct platform_device mxc_keypad_device;
 extern struct platform_device mxc_i2c_device0;
 extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_i2c_device2;
+extern struct platform_device mx25_fec_device;

arch/arm/mach-mx25/mx25pdk.c

@@ -18,10 +18,11 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-#include <linux/smsc911x.h>
+#include <linux/fec.h>
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
@@ -35,16 +36,57 @@
 #include <mach/mx25.h>
 #include <mach/mxc_nand.h>
 #include "devices.h"
-#include <mach/iomux-v3.h>
+#include <mach/iomux.h>
 
 static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
+static struct pad_desc mx25pdk_pads[] = {
+	MX25_PAD_FEC_MDC__FEC_MDC,
+	MX25_PAD_FEC_MDIO__FEC_MDIO,
+	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
+	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
+	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
+	MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
+};
+
+static struct fec_platform_data mx25_fec_pdata = {
+        .phy    = PHY_INTERFACE_MODE_RMII,
+};
+
+#define FEC_ENABLE_GPIO		35
+#define FEC_RESET_B_GPIO	104
+
+static void __init mx25pdk_fec_reset(void)
+{
+	gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
+	gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
+
+	gpio_direction_output(FEC_ENABLE_GPIO, 0);  /* drop PHY power */
+	gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
+	udelay(2);
+
+	/* turn on PHY power and lift reset */
+	gpio_set_value(FEC_ENABLE_GPIO, 1);
+	gpio_set_value(FEC_RESET_B_GPIO, 1);
+}
+
 static void __init mx25pdk_init(void)
 {
+	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
+			ARRAY_SIZE(mx25pdk_pads));
+
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_usbh2, NULL);
+
+	mx25pdk_fec_reset();
+	mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
 }
 
 static void __init mx25pdk_timer_init(void)

arch/arm/mach-mx3/Kconfig

@@ -49,6 +49,7 @@ config MACH_PCM037_EET
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -63,7 +64,7 @@ config MACH_MX31_3DS
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
-	select MXC_ULPI
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for mx31moboard platform. This includes specific
 	  configurations for the board and its peripherals.

arch/arm/mach-mx3/mm.c

@@ -65,6 +65,11 @@ static struct map_desc mxc_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
 		.length		= AIPS2_SIZE,
 		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual = SPBA0_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+		.length = SPBA0_SIZE,
+		.type = MT_DEVICE_NONSHARED
 	},
 };
 

arch/arm/mach-mx3/mx31ads.c

@@ -494,11 +494,6 @@ static void mxc_init_i2c(void)
  */
 static struct map_desc mx31ads_io_desc[] __initdata = {
 	{
-		.virtual	= SPBA0_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(SPBA0_BASE_ADDR),
-		.length		= SPBA0_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
 		.virtual	= CS4_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
 		.length		= CS4_SIZE / 2,

arch/arm/mach-mx3/mx31lite.c

@@ -135,6 +135,7 @@ static struct spi_board_info mc13783_spi_dev __initdata = {
  * USB
  */
 
+#if defined(CONFIG_USB_ULPI)
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
 			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
@@ -180,6 +181,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
 	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags  = MXC_EHCI_POWER_PINS_ENABLED,
 };
+#endif
 
 /*
  * NOR flash
@@ -212,11 +214,6 @@ static struct platform_device physmap_flash_device = {
  */
 static struct map_desc mx31lite_io_desc[] __initdata = {
 	{
-		.virtual = SPBA0_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
-		.length = SPBA0_SIZE,
-		.type = MT_DEVICE_NONSHARED
-	}, {
 		.virtual = CS4_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
 		.length = CS4_SIZE,
@@ -261,11 +258,13 @@ static void __init mxc_board_init(void)
 	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
 	spi_register_board_info(&mc13783_spi_dev, 1);
 
+#if defined(CONFIG_USB_ULPI)
 	/* USB */
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
 
 	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
 
 	/* SMSC9117 IRQ pin */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");

arch/arm/mach-mx3/mx31moboard-devboard.c

@@ -179,7 +179,7 @@ static int __init devboard_usbh1_init(void)
 
 	usbh1_pdata.otg = otg;
 
-	return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+	return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
 }
 
 /*

arch/arm/mach-mx3/mx31moboard-marxbot.c

@@ -294,7 +294,7 @@ static int __init marxbot_usbh1_init(void)
 
 	usbh1_pdata.otg = otg;
 
-	return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+	return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
 }
 
 /*

arch/arm/mach-mx3/mx31moboard.c

@@ -346,6 +346,8 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
+#if defined(CONFIG_USB_ULPI)
+
 #define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
 
 static int moboard_usbh2_hw_init(struct platform_device *pdev)
@@ -392,8 +394,11 @@ static int __init moboard_usbh2_init(void)
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
 
-	return mxc_register_device(&mx31_usbh2, &usbh2_pdata);
+	return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
 }
+#else
+static inline int moboard_usbh2_init(void) { return 0; }
+#endif
 
 
 static struct gpio_led mx31moboard_leds[] = {

arch/arm/mach-mx3/mx31pdk.c

@@ -211,11 +211,6 @@ static int __init mx31pdk_init_expio(void)
  */
 static struct map_desc mx31pdk_io_desc[] __initdata = {
 	{
-		.virtual = SPBA0_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
-		.length = SPBA0_SIZE,
-		.type = MT_DEVICE_NONSHARED,
-	}, {
 		.virtual = CS5_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(CS5_BASE_ADDR),
 		.length = CS5_SIZE,

arch/arm/mach-mx3/pcm037.c

@@ -322,16 +322,25 @@ static int pcm037_camera_power(struct device *dev, int on)
 	return 0;
 }
 
-static struct i2c_board_info pcm037_i2c_2_devices[] = {
+static struct i2c_board_info pcm037_i2c_camera[] = {
 	{
 		I2C_BOARD_INFO("mt9t031", 0x5d),
+	}, {
+		I2C_BOARD_INFO("mt9v022", 0x48),
 	},
 };
 
-static struct soc_camera_link iclink = {
+static struct soc_camera_link iclink_mt9v022 = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.board_info	= &pcm037_i2c_camera[1],
+	.i2c_adapter_id	= 2,
+	.module_name	= "mt9v022",
+};
+
+static struct soc_camera_link iclink_mt9t031 = {
 	.bus_id		= 0,		/* Must match with the camera ID */
 	.power		= pcm037_camera_power,
-	.board_info	= &pcm037_i2c_2_devices[0],
+	.board_info	= &pcm037_i2c_camera[0],
 	.i2c_adapter_id	= 2,
 	.module_name	= "mt9t031",
 };
@@ -345,11 +354,19 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 	}
 };
 
-static struct platform_device pcm037_camera = {
+static struct platform_device pcm037_mt9t031 = {
 	.name	= "soc-camera-pdrv",
 	.id	= 0,
 	.dev	= {
-		.platform_data = &iclink,
+		.platform_data = &iclink_mt9t031,
+	},
+};
+
+static struct platform_device pcm037_mt9v022 = {
+	.name	= "soc-camera-pdrv",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &iclink_mt9v022,
 	},
 };
 
@@ -449,7 +466,8 @@ static int __init pcm037_camera_alloc_dma(const size_t buf_size)
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
 	&pcm037_sram_device,
-	&pcm037_camera,
+	&pcm037_mt9t031,
+	&pcm037_mt9v022,
 };
 
 static struct ipu_platform_data mx3_ipu_data = {
@@ -599,7 +617,7 @@ static void __init mxc_board_init(void)
 	if (!ret)
 		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
 	else
-		iclink.power = NULL;
+		iclink_mt9t031.power = NULL;
 
 	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
 		mxc_register_device(&mx3_camera, &camera_pdata);

arch/arm/mach-pxa/Kconfig

@@ -37,6 +37,8 @@ config MACH_ZYLONITE320
 config MACH_LITTLETON
 	bool "PXA3xx Form Factor Platform (aka Littleton)"
 	select PXA3xx
+	select CPU_PXA300
+	select CPU_PXA310
 	select PXA_SSP
 
 config MACH_TAVOREVB

arch/arm/mach-pxa/include/mach/zylonite.h

@@ -8,13 +8,6 @@
 /* the following variables are processor specific and initialized
  * by the corresponding zylonite_pxa3xx_init()
  */
-struct platform_mmc_slot {
-	int gpio_cd;
-	int gpio_wp;
-};
-
-extern struct platform_mmc_slot zylonite_mmc_slot[];
-
 extern int gpio_eth_irq;
 extern int gpio_debug_led1;
 extern int gpio_debug_led2;

arch/arm/mach-pxa/littleton.c

@@ -110,6 +110,12 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
 	GPIO7_MMC1_CLK,
 	GPIO8_MMC1_CMD,
 	GPIO15_GPIO, /* card detect */
+
+	/* UART3 */
+	GPIO107_UART3_CTS,
+	GPIO108_UART3_RTS,
+	GPIO109_UART3_TXD,
+	GPIO110_UART3_RXD,
 };
 
 static struct resource smc91x_resources[] = {

arch/arm/mach-pxa/poodle.c

@@ -293,7 +293,7 @@ static struct pxamci_platform_data poodle_mci_platform_data = {
 	.init 			= poodle_mci_init,
 	.setpower 		= poodle_mci_setpower,
 	.exit			= poodle_mci_exit,
-	.gpio_card_detect	= POODLE_IRQ_GPIO_nSD_DETECT,
+	.gpio_card_detect	= POODLE_GPIO_nSD_DETECT,
 	.gpio_card_ro		= POODLE_GPIO_nSD_WP,
 	.gpio_power		= -1,
 };

arch/arm/mach-pxa/zeus.c

@@ -25,6 +25,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
+#include <linux/apm-emulation.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -626,7 +627,26 @@ static void zeus_power_off(void)
 	pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP);
 }
 
-int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio,
+#ifdef CONFIG_APM_EMULATION
+static void zeus_get_power_status(struct apm_power_info *info)
+{
+	/* Power supply is always present */
+	info->ac_line_status	= APM_AC_ONLINE;
+	info->battery_status	= APM_BATTERY_STATUS_NOT_PRESENT;
+	info->battery_flag	= APM_BATTERY_FLAG_NOT_PRESENT;
+}
+
+static inline void zeus_setup_apm(void)
+{
+	apm_get_power_status = zeus_get_power_status;
+}
+#else
+static inline void zeus_setup_apm(void)
+{
+}
+#endif
+
+static int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio,
 			     unsigned ngpio, void *context)
 {
 	int i;
@@ -726,9 +746,18 @@ static mfp_cfg_t zeus_pin_config[] __initdata = {
 	GPIO99_GPIO,		/* CF RDY */
 };
 
+/*
+ * DM9k MSCx settings:	SRAM, 16 bits
+ *			17 cycles delay first access
+ *			 5 cycles delay next access
+ *			13 cycles recovery time
+ *			faster device
+ */
+#define DM9K_MSC_VALUE		0xe4c9
+
 static void __init zeus_init(void)
 {
-	u16 dm9000_msc = 0xe279;
+	u16 dm9000_msc = DM9K_MSC_VALUE;
 
 	system_rev = __raw_readw(ZEUS_CPLD_VERSION);
 	pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
@@ -738,6 +767,7 @@ static void __init zeus_init(void)
 	MSC1 = (MSC1 & 0xffff0000) | dm9000_msc;
 
 	pm_power_off = zeus_power_off;
+	zeus_setup_apm();
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
 

arch/arm/mach-pxa/zylonite.c

@@ -36,9 +36,6 @@
 #include "devices.h"
 #include "generic.h"
 
-#define MAX_SLOTS	3
-struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
-
 int gpio_eth_irq;
 int gpio_debug_led1;
 int gpio_debug_led2;
@@ -220,84 +217,28 @@ static inline void zylonite_init_lcd(void) {}
 #endif
 
 #if defined(CONFIG_MMC)
-static int zylonite_mci_ro(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-
-	return gpio_get_value(zylonite_mmc_slot[pdev->id].gpio_wp);
-}
-
-static int zylonite_mci_init(struct device *dev,
-			     irq_handler_t zylonite_detect_int,
-			     void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int err, cd_irq, gpio_cd, gpio_wp;
-
-	cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
-	gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
-	gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
-
-	/*
-	 * setup GPIO for Zylonite MMC controller
-	 */
-	err = gpio_request(gpio_cd, "mmc card detect");
-	if (err)
-		goto err_request_cd;
-	gpio_direction_input(gpio_cd);
-
-	err = gpio_request(gpio_wp, "mmc write protect");
-	if (err)
-		goto err_request_wp;
-	gpio_direction_input(gpio_wp);
-
-	err = request_irq(cd_irq, zylonite_detect_int,
-			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: MMC/SD/SDIO: "
-				"can't request card detect IRQ\n", __func__);
-		goto err_request_irq;
-	}
-
-	return 0;
-
-err_request_irq:
-	gpio_free(gpio_wp);
-err_request_wp:
-	gpio_free(gpio_cd);
-err_request_cd:
-	return err;
-}
-
-static void zylonite_mci_exit(struct device *dev, void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int cd_irq, gpio_cd, gpio_wp;
-
-	cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
-	gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
-	gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
-
-	free_irq(cd_irq, data);
-	gpio_free(gpio_cd);
-	gpio_free(gpio_wp);
-}
-
 static struct pxamci_platform_data zylonite_mci_platform_data = {
 	.detect_delay	= 20,
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= zylonite_mci_init,
-	.exit		= zylonite_mci_exit,
-	.get_ro		= zylonite_mci_ro,
-	.gpio_card_detect = -1,
-	.gpio_card_ro	= -1,
+	.gpio_card_detect = EXT_GPIO(0),
+	.gpio_card_ro	= EXT_GPIO(2),
 	.gpio_power	= -1,
 };
 
 static struct pxamci_platform_data zylonite_mci2_platform_data = {
 	.detect_delay	= 20,
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect = EXT_GPIO(1),
+	.gpio_card_ro	= EXT_GPIO(3),
+	.gpio_power	= -1,
+};
+
+static struct pxamci_platform_data zylonite_mci3_platform_data = {
+	.detect_delay	= 20,
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect = EXT_GPIO(30),
+	.gpio_card_ro	= EXT_GPIO(31),
+	.gpio_power	= -1,
 };
 
 static void __init zylonite_init_mmc(void)
@@ -305,7 +246,7 @@ static void __init zylonite_init_mmc(void)
 	pxa_set_mci_info(&zylonite_mci_platform_data);
 	pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
 	if (cpu_is_pxa310())
-		pxa3xx_set_mci3_info(&zylonite_mci_platform_data);
+		pxa3xx_set_mci3_info(&zylonite_mci3_platform_data);
 }
 #else
 static inline void zylonite_init_mmc(void) {}

arch/arm/mach-pxa/zylonite_pxa300.c

@@ -129,8 +129,8 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO22_I2C_SDA,
 
 	/* GPIO */
-	GPIO18_GPIO,	/* GPIO Expander #0 INT_N */
-	GPIO19_GPIO,	/* GPIO Expander #1 INT_N */
+	GPIO18_GPIO | MFP_PULL_HIGH,	/* GPIO Expander #0 INT_N */
+	GPIO19_GPIO | MFP_PULL_HIGH,	/* GPIO Expander #1 INT_N */
 };
 
 static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
@@ -258,10 +258,6 @@ void __init zylonite_pxa300_init(void)
 		/* detect LCD panel */
 		zylonite_detect_lcd_panel();
 
-		/* MMC card detect & write protect for controller 0 */
-		zylonite_mmc_slot[0].gpio_cd  = EXT_GPIO(0);
-		zylonite_mmc_slot[0].gpio_wp  = EXT_GPIO(2);
-
 		/* WM9713 IRQ */
 		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
 
@@ -276,10 +272,6 @@ void __init zylonite_pxa300_init(void)
 	if (cpu_is_pxa310()) {
 		pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg));
 		gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102);
-
-		/* MMC card detect & write protect for controller 2 */
-		zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30);
-		zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31);
 	}
 
 	/* GPIOs for Debug LEDs */

arch/arm/mach-pxa/zylonite_pxa320.c

@@ -209,10 +209,6 @@ void __init zylonite_pxa320_init(void)
 		gpio_debug_led1	= mfp_to_gpio(MFP_PIN_GPIO1_2);
 		gpio_debug_led2	= mfp_to_gpio(MFP_PIN_GPIO4_2);
 
-		/* MMC card detect & write protect for controller 0 */
-		zylonite_mmc_slot[0].gpio_cd  = mfp_to_gpio(MFP_PIN_GPIO1);
-		zylonite_mmc_slot[0].gpio_wp  = mfp_to_gpio(MFP_PIN_GPIO5);
-
 		/* WM9713 IRQ */
 		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO15);
 	}

arch/arm/mach-w90x900/include/mach/system.h

@@ -15,7 +15,15 @@
  *
  */
 
+#include <linux/io.h>
 #include <asm/proc-fns.h>
+#include <mach/map.h>
+#include <mach/regs-timer.h>
+
+#define	WTCR	(TMR_BA + 0x1C)
+#define	WTCLK	(1 << 10)
+#define	WTE	(1 << 7)
+#define	WTRE	(1 << 1)
 
 static void arch_idle(void)
 {
@@ -23,6 +31,11 @@ static void arch_idle(void)
 
 static void arch_reset(char mode, const char *cmd)
 {
+	if (mode == 's') {
+		/* Jump into ROM at address 0 */
 		cpu_reset(0);
+	} else {
+		__raw_writel(WTE | WTRE | WTCLK, WTCR);
+	}
 }
 

arch/arm/mach-w90x900/time.c

@@ -42,7 +42,10 @@
 #define TICKS_PER_SEC	100
 #define PRESCALE	0x63 /* Divider = prescale + 1 */
 
-unsigned int timer0_load;
+#define	TDR_SHIFT	24
+#define	TDR_MASK	((1 << TDR_SHIFT) - 1)
+
+static unsigned int timer0_load;
 
 static void nuc900_clockevent_setmode(enum clock_event_mode mode,
 		struct clock_event_device *clk)
@@ -88,7 +91,7 @@ static int nuc900_clockevent_setnextevent(unsigned long evt,
 static struct clock_event_device nuc900_clockevent_device = {
 	.name		= "nuc900-timer0",
 	.shift		= 32,
-	.features	= CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_mode	= nuc900_clockevent_setmode,
 	.set_next_event	= nuc900_clockevent_setnextevent,
 	.rating		= 300,
@@ -112,8 +115,23 @@ static struct irqaction nuc900_timer0_irq = {
 	.handler	= nuc900_timer0_interrupt,
 };
 
-static void __init nuc900_clockevents_init(unsigned int rate)
+static void __init nuc900_clockevents_init(void)
 {
+	unsigned int rate;
+	struct clk *clk = clk_get(NULL, "timer0");
+
+	BUG_ON(IS_ERR(clk));
+
+	__raw_writel(0x00, REG_TCSR0);
+
+	clk_enable(clk);
+	rate = clk_get_rate(clk) / (PRESCALE + 1);
+
+	timer0_load = (rate / TICKS_PER_SEC);
+
+	__raw_writel(RESETINT, REG_TISR);
+	setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
+
 	nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
 					nuc900_clockevent_device.shift);
 	nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
@@ -127,26 +145,35 @@ static void __init nuc900_clockevents_init(unsigned int rate)
 
 static cycle_t nuc900_get_cycles(struct clocksource *cs)
 {
-	return ~__raw_readl(REG_TDR1);
+	return (~__raw_readl(REG_TDR1)) & TDR_MASK;
 }
 
 static struct clocksource clocksource_nuc900 = {
 	.name	= "nuc900-timer1",
 	.rating	= 200,
 	.read	= nuc900_get_cycles,
-	.mask	= CLOCKSOURCE_MASK(32),
-	.shift	= 20,
+	.mask	= CLOCKSOURCE_MASK(TDR_SHIFT),
+	.shift	= 10,
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init nuc900_clocksource_init(unsigned int rate)
+static void __init nuc900_clocksource_init(void)
 {
 	unsigned int val;
+	unsigned int rate;
+	struct clk *clk = clk_get(NULL, "timer1");
+
+	BUG_ON(IS_ERR(clk));
+
+	__raw_writel(0x00, REG_TCSR1);
+
+	clk_enable(clk);
+	rate = clk_get_rate(clk) / (PRESCALE + 1);
 
 	__raw_writel(0xffffffff, REG_TICR1);
 
 	val = __raw_readl(REG_TCSR1);
-	val |= (COUNTEN | PERIOD);
+	val |= (COUNTEN | PERIOD | PRESCALE);
 	__raw_writel(val, REG_TCSR1);
 
 	clocksource_nuc900.mult =
@@ -156,25 +183,8 @@ static void __init nuc900_clocksource_init(unsigned int rate)
 
 static void __init nuc900_timer_init(void)
 {
-	struct clk *ck_ext = clk_get(NULL, "ext");
-	unsigned int	rate;
-
-	BUG_ON(IS_ERR(ck_ext));
-
-	rate = clk_get_rate(ck_ext);
-	clk_put(ck_ext);
-	rate = rate / (PRESCALE + 0x01);
-
-	 /* set a known state */
-	__raw_writel(0x00, REG_TCSR0);
-	__raw_writel(0x00, REG_TCSR1);
-	__raw_writel(RESETINT, REG_TISR);
-	timer0_load = (rate / TICKS_PER_SEC);
-
-	setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
-
-	nuc900_clocksource_init(rate);
-	nuc900_clockevents_init(rate);
+	nuc900_clocksource_init();
+	nuc900_clockevents_init();
 }
 
 struct sys_timer nuc900_timer = {

arch/arm/mm/tlb-v7.S

@@ -40,7 +40,6 @@ ENTRY(v7wbi_flush_user_tlb_range)
 	asid	r3, r3				@ mask ASID
 	orr	r0, r3, r0, lsl #PAGE_SHIFT	@ Create initial MVA
 	mov	r1, r1, lsl #PAGE_SHIFT
-	vma_vm_flags r2, r2			@ get vma->vm_flags
 1:
 #ifdef CONFIG_SMP
 	mcr	p15, 0, r0, c8, c3, 1		@ TLB invalidate U MVA (shareable) 

arch/arm/plat-mxc/include/mach/iomux-mx25.h

@@ -58,19 +58,19 @@
 
 #define MX25_PAD_A18__A18		IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A18__GPIO_2_4		IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A18__FEC_COL		IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTL)
+#define MX25_PAD_A18__FEC_COL		IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A19__A19		IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A19__FEC_RX_ER		IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTL)
+#define MX25_PAD_A19__FEC_RX_ER		IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTRL)
 #define MX25_PAD_A19__GPIO_2_5		IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A20__A20		IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A20__GPIO_2_6		IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A20__FEC_RDATA2	IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTL)
+#define MX25_PAD_A20__FEC_RDATA2	IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A21__A21		IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A21__GPIO_2_7		IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A21__FEC_RDATA3	IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTL)
+#define MX25_PAD_A21__FEC_RDATA3	IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A22__A22		IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A22__GPIO_2_8		IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL)
@@ -80,11 +80,11 @@
 
 #define MX25_PAD_A24__A24		IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A24__GPIO_2_10		IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A24__FEC_RX_CLK	IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTL)
+#define MX25_PAD_A24__FEC_RX_CLK	IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A25__A25		IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A25__GPIO_2_11		IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A25__FEC_CRS		IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTL)
+#define MX25_PAD_A25__FEC_CRS		IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_EB0__EB0		IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_EB0__AUD4_TXD		IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL)
@@ -112,7 +112,7 @@
 #define MX25_PAD_CS5__UART5_RTS		IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL)
 #define MX25_PAD_CS5__GPIO_3_21		IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_NF_CE0__NF_CE0		IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_NF_CE0__NF_CE0		IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_NF_CE0__GPIO_3_22	IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_ECB__ECB		IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL)
@@ -229,28 +229,28 @@
 #define MX25_PAD_LD7__GPIO_1_21		IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_LD8__LD8		IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD8__FEC_TX_ERR	IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_LD8__FEC_TX_ERR	IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_LD9__LD9		IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD9__FEC_COL		IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTL)
+#define MX25_PAD_LD9__FEC_COL		IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_LD10__LD10		IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD10__FEC_RX_ER	IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTL)
+#define MX25_PAD_LD10__FEC_RX_ER	IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_LD11__LD11		IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD11__FEC_RDATA2	IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTL)
+#define MX25_PAD_LD11__FEC_RDATA2	IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_LD12__LD12		IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD12__FEC_RDATA3	IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTL)
+#define MX25_PAD_LD12__FEC_RDATA3	IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_LD13__LD13		IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD13__FEC_TDATA2	IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_LD13__FEC_TDATA2	IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_LD14__LD14		IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD14__FEC_TDATA3	IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_LD14__FEC_TDATA3	IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_LD15__LD15		IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD15__FEC_RX_CLK	IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTL)
+#define MX25_PAD_LD15__FEC_RX_CLK	IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_HSYNC__HSYNC		IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_HSYNC__GPIO_1_22	IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL)
@@ -265,7 +265,7 @@
 #define MX25_PAD_OE_ACD__GPIO_1_25	IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_CONTRAST__CONTRAST	IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CONTRAST__FEC_CRS	IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTL)
+#define MX25_PAD_CONTRAST__FEC_CRS	IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_PWM__PWM		IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_PWM__GPIO_1_26		IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL)
@@ -354,19 +354,19 @@
 #define MX25_PAD_UART2_TXD__GPIO_4_27	IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_UART2_RTS__UART2_RTS	IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_RTS__FEC_COL	IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_RTS__FEC_COL	IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTRL)
 #define MX25_PAD_UART2_RTS__GPIO_4_28	IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_UART2_CTS__FEC_RX_ER	IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_CTS__FEC_RX_ER	IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTRL)
 #define MX25_PAD_UART2_CTS__UART2_CTS	IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_UART2_CTS__GPIO_4_29	IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_CMD__SD1_CMD	IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_CMD__FEC_RDATA2	IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CMD__FEC_RDATA2	IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_CMD__GPIO_2_23	IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_CLK__SD1_CLK	IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_CLK__FEC_RDATA3	IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CLK__FEC_RDATA3	IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_CLK__GPIO_2_24	IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_DATA0__SD1_DATA0	IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
@@ -377,11 +377,11 @@
 #define MX25_PAD_SD1_DATA1__GPIO_2_26	IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_DATA2__SD1_DATA2	IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA2__FEC_RX_CLK	IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK	IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_DATA2__GPIO_2_27	IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_DATA3__SD1_DATA3	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA3__FEC_CRS	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA3__FEC_CRS	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_DATA3__GPIO_2_28	IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_KPP_ROW0__KPP_ROW0	IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE)
@@ -410,7 +410,7 @@
 #define MX25_PAD_KPP_COL3__KPP_COL3	IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
 #define MX25_PAD_KPP_COL3__GPIO_3_4	IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_MDC__FEC_MDC	IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_MDC__FEC_MDC	IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_FEC_MDC__AUD4_TXD	IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL)
 #define MX25_PAD_FEC_MDC__GPIO_3_5	IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL)
 
@@ -418,23 +418,23 @@
 #define MX25_PAD_FEC_MDIO__AUD4_RXD	IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL)
 #define MX25_PAD_FEC_MDIO__GPIO_3_6	IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_TDATA0__FEC_TDATA0	IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0	IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_FEC_TDATA0__GPIO_3_7	IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_TDATA1__FEC_TDATA1	IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1	IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_FEC_TDATA1__AUD4_TXFS	IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL)
 #define MX25_PAD_FEC_TDATA1__GPIO_3_8	IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_TX_EN__FEC_TX_EN	IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN	IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_FEC_TX_EN__GPIO_3_9   	IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_RDATA0__FEC_RDATA0	IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0	IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
 #define MX25_PAD_FEC_RDATA0__GPIO_3_10	IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_RDATA1__FEC_RDATA1	IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1	IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
 #define MX25_PAD_FEC_RDATA1__GPIO_3_11	IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_RX_DV__FEC_RX_DV	IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV	IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
 #define MX25_PAD_FEC_RX_DV__CAN2_RX	IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP)
 #define MX25_PAD_FEC_RX_DV__GPIO_3_12	IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL)
 

arch/arm/plat-mxc/include/mach/mx25.h

@@ -41,4 +41,8 @@
 #define UART1_BASE_ADDR			0x43f90000
 #define UART2_BASE_ADDR			0x43f94000
 
+#define MX25_FEC_BASE_ADDR		0x50038000
+
+#define MX25_INT_FEC	57
+
 #endif /* __MACH_MX25_H__ */

arch/arm/plat-pxa/pwm.c

@@ -204,14 +204,14 @@ static int __devinit pwm_probe(struct platform_device *pdev)
 		goto err_free_clk;
 	}
 
-	r = request_mem_region(r->start, r->end - r->start + 1, pdev->name);
+	r = request_mem_region(r->start, resource_size(r), pdev->name);
 	if (r == NULL) {
 		dev_err(&pdev->dev, "failed to request memory resource\n");
 		ret = -EBUSY;
 		goto err_free_clk;
 	}
 
-	pwm->mmio_base = ioremap(r->start, r->end - r->start + 1);
+	pwm->mmio_base = ioremap(r->start, resource_size(r));
 	if (pwm->mmio_base == NULL) {
 		dev_err(&pdev->dev, "failed to ioremap() registers\n");
 		ret = -ENODEV;
@@ -241,7 +241,7 @@ static int __devinit pwm_probe(struct platform_device *pdev)
 	return 0;
 
 err_free_mem:
-	release_mem_region(r->start, r->end - r->start + 1);
+	release_mem_region(r->start, resource_size(r));
 err_free_clk:
 	clk_put(pwm->clk);
 err_free:
@@ -271,7 +271,7 @@ static int __devexit pwm_remove(struct platform_device *pdev)
 	iounmap(pwm->mmio_base);
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(r->start, r->end - r->start + 1);
+	release_mem_region(r->start, resource_size(r));
 
 	clk_put(pwm->clk);
 	kfree(pwm);

drivers/net/arm/Kconfig

@@ -68,6 +68,7 @@ config W90P910_ETH
 	tristate "Nuvoton w90p910 Ethernet support"
 	depends on ARM && ARCH_W90X900
 	select PHYLIB
+	select MII
 	help
 	  Say Y here if you want to use built-in Ethernet ports
 	  on w90p910 processor.

drivers/video/pxafb.c

@@ -1221,9 +1221,9 @@ static void setup_smart_timing(struct pxafb_info *fbi,
 static int pxafb_smart_thread(void *arg)
 {
 	struct pxafb_info *fbi = arg;
-	struct pxafb_mach_info *inf;
+	struct pxafb_mach_info *inf = fbi->dev->platform_data;
 
-	if (!fbi || !fbi->dev->platform_data->smart_update) {
+	if (!inf->smart_update) {
 		pr_err("%s: not properly initialized, thread terminated\n",
 				__func__);
 		return -EINVAL;