ARM: OMAP2+: Move omap3 dpll ops to dpll3xxx.c

In order to remove unnecessary idefs, move noncore and core
dpll ops to dpll3xxx.c file (where it should have been already).

The clkops (clkops_omap3_core_dpll_ops & clkops_omap3_noncore_dpll_ops)
is used in clock data files, and dependency is already handled by
Makefile rule.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/clock.c

@@ -398,24 +398,6 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 	return omap2_clksel_set_parent(clk, new_parent);
 }
 
-/* OMAP3/4 non-CORE DPLL clkops */
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-
-const struct clkops clkops_omap3_noncore_dpll_ops = {
-	.enable		= omap3_noncore_dpll_enable,
-	.disable	= omap3_noncore_dpll_disable,
-	.allow_idle	= omap3_dpll_allow_idle,
-	.deny_idle	= omap3_dpll_deny_idle,
-};
-
-const struct clkops clkops_omap3_core_dpll_ops = {
-	.allow_idle	= omap3_dpll_allow_idle,
-	.deny_idle	= omap3_dpll_deny_idle,
-};
-
-#endif
-
 /*
  * OMAP2+ clock reset and init functions
  */

arch/arm/mach-omap2/dpll3xxx.c

@@ -638,3 +638,17 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk)
 		rate = clk->parent->rate * 2;
 	return rate;
 }
+
+/* OMAP3/4 non-CORE DPLL clkops */
+
+const struct clkops clkops_omap3_noncore_dpll_ops = {
+	.enable		= omap3_noncore_dpll_enable,
+	.disable	= omap3_noncore_dpll_disable,
+	.allow_idle	= omap3_dpll_allow_idle,
+	.deny_idle	= omap3_dpll_deny_idle,
+};
+
+const struct clkops clkops_omap3_core_dpll_ops = {
+	.allow_idle	= omap3_dpll_allow_idle,
+	.deny_idle	= omap3_dpll_deny_idle,
+};