Commit 36034dc3 authored by Sascha Hauer's avatar Sascha Hauer Committed by Mauro Carvalho Chehab

V4L/DVB (11032): mt9m001: allow setting of bus width from board code

This patch removes the phytec specific setting of the bus width
and switches to the more generic query_bus_param/set_bus_param
hooks
Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: default avatarGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent d75b1dcc
......@@ -707,13 +707,6 @@ config SOC_CAMERA_MT9M001
This driver supports MT9M001 cameras from Micron, monochrome
and colour models.
config MT9M001_PCA9536_SWITCH
bool "pca9536 datawidth switch for mt9m001"
depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO
help
Select this if your MT9M001 camera uses a PCA9536 I2C GPIO
extender to switch between 8 and 10 bit datawidth modes
config SOC_CAMERA_MT9M111
tristate "mt9m111 and mt9m112 support"
depends on SOC_CAMERA && I2C
......
......@@ -12,7 +12,6 @@
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/log2.h>
#include <linux/gpio.h>
#include <media/v4l2-common.h>
#include <media/v4l2-chip-ident.h>
......@@ -73,9 +72,7 @@ struct mt9m001 {
struct i2c_client *client;
struct soc_camera_device icd;
int model; /* V4L2_IDENT_MT9M001* codes from v4l2-chip-ident.h */
int switch_gpio;
unsigned char autoexposure;
unsigned char datawidth;
};
static int reg_read(struct soc_camera_device *icd, const u8 reg)
......@@ -181,92 +178,28 @@ static int mt9m001_stop_capture(struct soc_camera_device *icd)
return 0;
}
static int bus_switch_request(struct mt9m001 *mt9m001,
struct soc_camera_link *icl)
{
#ifdef CONFIG_MT9M001_PCA9536_SWITCH
int ret;
unsigned int gpio = icl->gpio;
if (gpio_is_valid(gpio)) {
/* We have a data bus switch. */
ret = gpio_request(gpio, "mt9m001");
if (ret < 0) {
dev_err(&mt9m001->client->dev, "Cannot get GPIO %u\n",
gpio);
return ret;
}
ret = gpio_direction_output(gpio, 0);
if (ret < 0) {
dev_err(&mt9m001->client->dev,
"Cannot set GPIO %u to output\n", gpio);
gpio_free(gpio);
return ret;
}
}
mt9m001->switch_gpio = gpio;
#else
mt9m001->switch_gpio = -EINVAL;
#endif
return 0;
}
static void bus_switch_release(struct mt9m001 *mt9m001)
{
#ifdef CONFIG_MT9M001_PCA9536_SWITCH
if (gpio_is_valid(mt9m001->switch_gpio))
gpio_free(mt9m001->switch_gpio);
#endif
}
static int bus_switch_act(struct mt9m001 *mt9m001, int go8bit)
{
#ifdef CONFIG_MT9M001_PCA9536_SWITCH
if (!gpio_is_valid(mt9m001->switch_gpio))
return -ENODEV;
gpio_set_value_cansleep(mt9m001->switch_gpio, go8bit);
return 0;
#else
return -ENODEV;
#endif
}
static int bus_switch_possible(struct mt9m001 *mt9m001)
{
#ifdef CONFIG_MT9M001_PCA9536_SWITCH
return gpio_is_valid(mt9m001->switch_gpio);
#else
return 0;
#endif
}
static int mt9m001_set_bus_param(struct soc_camera_device *icd,
unsigned long flags)
{
struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
unsigned int width_flag = flags & SOCAM_DATAWIDTH_MASK;
int ret;
/* Flags validity verified in test_bus_param */
struct soc_camera_link *icl = mt9m001->client->dev.platform_data;
unsigned long width_flag = flags & SOCAM_DATAWIDTH_MASK;
if ((mt9m001->datawidth != 10 && (width_flag == SOCAM_DATAWIDTH_10)) ||
(mt9m001->datawidth != 9 && (width_flag == SOCAM_DATAWIDTH_9)) ||
(mt9m001->datawidth != 8 && (width_flag == SOCAM_DATAWIDTH_8))) {
/* Well, we actually only can do 10 or 8 bits... */
if (width_flag == SOCAM_DATAWIDTH_9)
/* Only one width bit may be set */
if (!is_power_of_2(width_flag))
return -EINVAL;
ret = bus_switch_act(mt9m001,
width_flag == SOCAM_DATAWIDTH_8);
if (ret < 0)
return ret;
mt9m001->datawidth = width_flag == SOCAM_DATAWIDTH_8 ? 8 : 10;
}
if (icl->set_bus_param)
return icl->set_bus_param(icl, width_flag);
/*
* Without board specific bus width settings we only support the
* sensors native bus width
*/
if (width_flag == SOCAM_DATAWIDTH_10)
return 0;
return -EINVAL;
}
static unsigned long mt9m001_query_bus_param(struct soc_camera_device *icd)
......@@ -274,12 +207,14 @@ static unsigned long mt9m001_query_bus_param(struct soc_camera_device *icd)
struct mt9m001 *mt9m001 = container_of(icd, struct mt9m001, icd);
struct soc_camera_link *icl = mt9m001->client->dev.platform_data;
/* MT9M001 has all capture_format parameters fixed */
unsigned long flags = SOCAM_DATAWIDTH_10 | SOCAM_PCLK_SAMPLE_RISING |
unsigned long flags = SOCAM_PCLK_SAMPLE_RISING |
SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH |
SOCAM_DATA_ACTIVE_HIGH | SOCAM_MASTER;
if (bus_switch_possible(mt9m001))
flags |= SOCAM_DATAWIDTH_8;
if (icl->query_bus_param)
flags |= icl->query_bus_param(icl) & SOCAM_DATAWIDTH_MASK;
else
flags |= SOCAM_DATAWIDTH_10;
return soc_camera_apply_sensor_flags(icl, flags);
}
......@@ -598,6 +533,7 @@ static int mt9m001_video_probe(struct soc_camera_device *icd)
struct soc_camera_link *icl = mt9m001->client->dev.platform_data;
s32 data;
int ret;
unsigned long flags;
/* We must have a parent by now. And it cannot be a wrong one.
* So this entire test is completely redundant. */
......@@ -618,18 +554,10 @@ static int mt9m001_video_probe(struct soc_camera_device *icd)
case 0x8421:
mt9m001->model = V4L2_IDENT_MT9M001C12ST;
icd->formats = mt9m001_colour_formats;
if (gpio_is_valid(icl->gpio))
icd->num_formats = ARRAY_SIZE(mt9m001_colour_formats);
else
icd->num_formats = 1;
break;
case 0x8431:
mt9m001->model = V4L2_IDENT_MT9M001C12STM;
icd->formats = mt9m001_monochrome_formats;
if (gpio_is_valid(icl->gpio))
icd->num_formats = ARRAY_SIZE(mt9m001_monochrome_formats);
else
icd->num_formats = 1;
break;
default:
ret = -ENODEV;
......@@ -638,6 +566,26 @@ static int mt9m001_video_probe(struct soc_camera_device *icd)
goto ei2c;
}
icd->num_formats = 0;
/*
* This is a 10bit sensor, so by default we only allow 10bit.
* The platform may support different bus widths due to
* different routing of the data lines.
*/
if (icl->query_bus_param)
flags = icl->query_bus_param(icl);
else
flags = SOCAM_DATAWIDTH_10;
if (flags & SOCAM_DATAWIDTH_10)
icd->num_formats++;
else
icd->formats++;
if (flags & SOCAM_DATAWIDTH_8)
icd->num_formats++;
dev_info(&icd->dev, "Detected a MT9M001 chip ID %x (%s)\n", data,
data == 0x8431 ? "C12STM" : "C12ST");
......@@ -703,18 +651,10 @@ static int mt9m001_probe(struct i2c_client *client,
icd->height_max = 1024;
icd->y_skip_top = 1;
icd->iface = icl->bus_id;
/* Default datawidth - this is the only width this camera (normally)
* supports. It is only with extra logic that it can support
* other widths. Therefore it seems to be a sensible default. */
mt9m001->datawidth = 10;
/* Simulated autoexposure. If enabled, we calculate shutter width
* ourselves in the driver based on vertical blanking and frame width */
mt9m001->autoexposure = 1;
ret = bus_switch_request(mt9m001, icl);
if (ret)
goto eswinit;
ret = soc_camera_device_register(icd);
if (ret)
goto eisdr;
......@@ -722,8 +662,6 @@ static int mt9m001_probe(struct i2c_client *client,
return 0;
eisdr:
bus_switch_release(mt9m001);
eswinit:
kfree(mt9m001);
return ret;
}
......@@ -733,7 +671,6 @@ static int mt9m001_remove(struct i2c_client *client)
struct mt9m001 *mt9m001 = i2c_get_clientdata(client);
soc_camera_device_unregister(&mt9m001->icd);
bus_switch_release(mt9m001);
kfree(mt9m001);
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment