[media] b2c2: break it into common/pci/usb directories

b2c2 is, in fact, 2 drivers: one for PCI and one for USB, plus
a common bus-independent code. Break it accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/Kconfig

@@ -139,7 +139,6 @@ config DVB_NET
 	  unsure say Y.
 
 comment "Media drivers"
-source "drivers/media/common/Kconfig"
 source "drivers/media/rc/Kconfig"
 
 #
@@ -173,4 +172,7 @@ comment "Supported DVB Frontends"
 	depends on DVB_CORE
 source "drivers/media/dvb-frontends/Kconfig"
 
+# Common drivers
+source "drivers/media/common/Kconfig"
+
 endif # MEDIA_SUPPORT

drivers/media/common/Kconfig

@@ -7,3 +7,5 @@ config VIDEO_SAA7146_VV
 	depends on VIDEO_V4L2
 	select VIDEOBUF_DMA_SG
 	select VIDEO_SAA7146
+
+source "drivers/media/common/b2c2/Kconfig"

drivers/media/common/Makefile

 saa7146-objs    := saa7146_i2c.o saa7146_core.o
 saa7146_vv-objs := saa7146_fops.o saa7146_video.o saa7146_hlp.o saa7146_vbi.o
 
-obj-y += tuners/
+obj-y += tuners/ b2c2/
 obj-$(CONFIG_VIDEO_SAA7146) += saa7146.o
 obj-$(CONFIG_VIDEO_SAA7146_VV) += saa7146_vv.o

drivers/media/common/b2c2/Kconfig

+config DVB_B2C2_FLEXCOP
+	tristate
+	depends on DVB_CORE && I2C
+	depends on DVB_B2C2_FLEXCOP_PCI || DVB_B2C2_FLEXCOP_USB
+	default y
+	select DVB_PLL if !DVB_FE_CUSTOMISE
+	select DVB_STV0299 if !DVB_FE_CUSTOMISE
+	select DVB_MT352 if !DVB_FE_CUSTOMISE
+	select DVB_MT312 if !DVB_FE_CUSTOMISE
+	select DVB_NXT200X if !DVB_FE_CUSTOMISE
+	select DVB_STV0297 if !DVB_FE_CUSTOMISE
+	select DVB_BCM3510 if !DVB_FE_CUSTOMISE
+	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
+	select DVB_S5H1420 if !DVB_FE_CUSTOMISE
+	select DVB_TUNER_ITD1000 if !DVB_FE_CUSTOMISE
+	select DVB_ISL6421 if !DVB_FE_CUSTOMISE
+	select DVB_CX24123 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
+	select DVB_TUNER_CX24113 if !DVB_FE_CUSTOMISE
+	help
+	  Support for the digital TV receiver chip made by B2C2 Inc. included in
+	  Technisats PCI cards and USB boxes.
+
+	  Say Y if you own such a device and want to use it.
+
+config DVB_B2C2_FLEXCOP_DEBUG
+	bool "Enable debug for the B2C2 FlexCop drivers"
+	depends on DVB_B2C2_FLEXCOP
+	help
+	  Say Y if you want to enable the module option to control debug messages
+	  of all B2C2 FlexCop drivers.

drivers/media/common/b2c2/Makefile

+b2c2-flexcop-objs = flexcop.o flexcop-fe-tuner.o flexcop-i2c.o \
+	flexcop-sram.o flexcop-eeprom.o flexcop-misc.o flexcop-hw-filter.o
+obj-$(CONFIG_DVB_B2C2_FLEXCOP) += b2c2-flexcop.o
+
+ccflags-y += -Idrivers/media/dvb-core/
+ccflags-y += -Idrivers/media/dvb-frontends/
+ccflags-y += -Idrivers/media/common/tuners/

drivers/media/pci/Kconfig

@@ -3,48 +3,39 @@
 #
 
 menuconfig DVB_CAPTURE_DRIVERS
-	bool "DVB/ATSC adapters"
+	bool "DVB/ATSC PCI adapters"
 	depends on DVB_CORE
 	default y
 	---help---
 	  Say Y to select Digital TV adapters
 
-if DVB_CAPTURE_DRIVERS && DVB_CORE
+if DVB_CAPTURE_DRIVERS && DVB_CORE && PCI && I2C
 
 comment "Supported SAA7146 based PCI Adapters"
-	depends on DVB_CORE && PCI && I2C
 source "drivers/media/pci/ttpci/Kconfig"
 
-comment "Supported FlexCopII (B2C2) Adapters"
-	depends on DVB_CORE && (PCI || USB) && I2C
+comment "Supported FlexCopII (B2C2) PCI Adapters"
 source "drivers/media/pci/b2c2/Kconfig"
 
 comment "Supported BT878 Adapters"
-	depends on DVB_CORE && PCI && I2C
 source "drivers/media/pci/bt8xx/Kconfig"
 
 comment "Supported Pluto2 Adapters"
-	depends on DVB_CORE && PCI && I2C
 source "drivers/media/pci/pluto2/Kconfig"
 
 comment "Supported SDMC DM1105 Adapters"
-	depends on DVB_CORE && PCI && I2C
 source "drivers/media/pci/dm1105/Kconfig"
 
 comment "Supported Earthsoft PT1 Adapters"
-	depends on DVB_CORE && PCI && I2C
 source "drivers/media/pci/pt1/Kconfig"
 
 comment "Supported Mantis Adapters"
-	depends on DVB_CORE && PCI && I2C
-	source "drivers/media/pci/mantis/Kconfig"
+source "drivers/media/pci/mantis/Kconfig"
 
 comment "Supported nGene Adapters"
-	depends on DVB_CORE && PCI && I2C
-	source "drivers/media/pci/ngene/Kconfig"
+source "drivers/media/pci/ngene/Kconfig"
 
 comment "Supported ddbridge ('Octopus') Adapters"
-	depends on DVB_CORE && PCI && I2C
-	source "drivers/media/pci/ddbridge/Kconfig"
+source "drivers/media/pci/ddbridge/Kconfig"
 
 endif # DVB_CAPTURE_DRIVERS

drivers/media/pci/Makefile

@@ -10,4 +10,5 @@ obj-y        :=	ttpci/		\
 		pt1/		\
 		mantis/		\
 		ngene/		\
-		ddbridge/
+		ddbridge/	\
+		b2c2/

drivers/media/pci/b2c2/Kconfig

-config DVB_B2C2_FLEXCOP
-	tristate "Technisat/B2C2 FlexCopII(b) and FlexCopIII adapters"
-	depends on DVB_CORE && I2C
-	select DVB_PLL if !DVB_FE_CUSTOMISE
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
-	select DVB_MT352 if !DVB_FE_CUSTOMISE
-	select DVB_MT312 if !DVB_FE_CUSTOMISE
-	select DVB_NXT200X if !DVB_FE_CUSTOMISE
-	select DVB_STV0297 if !DVB_FE_CUSTOMISE
-	select DVB_BCM3510 if !DVB_FE_CUSTOMISE
-	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
-	select DVB_S5H1420 if !DVB_FE_CUSTOMISE
-	select DVB_TUNER_ITD1000 if !DVB_FE_CUSTOMISE
-	select DVB_ISL6421 if !DVB_FE_CUSTOMISE
-	select DVB_CX24123 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
-	select DVB_TUNER_CX24113 if !DVB_FE_CUSTOMISE
-	help
-	  Support for the digital TV receiver chip made by B2C2 Inc. included in
-	  Technisats PCI cards and USB boxes.
-
-	  Say Y if you own such a device and want to use it.
-
 config DVB_B2C2_FLEXCOP_PCI
 	tristate "Technisat/B2C2 Air/Sky/Cable2PC PCI"
-	depends on DVB_B2C2_FLEXCOP && PCI && I2C
 	help
 	  Support for the Air/Sky/CableStar2 PCI card (DVB/ATSC) by Technisat/B2C2.
 
 	  Say Y if you own such a device and want to use it.
-
-config DVB_B2C2_FLEXCOP_USB
-	tristate "Technisat/B2C2 Air/Sky/Cable2PC USB"
-	depends on DVB_B2C2_FLEXCOP && USB && I2C
-	help
-	  Support for the Air/Sky/Cable2PC USB1.1 box (DVB/ATSC) by Technisat/B2C2,
-
-	  Say Y if you own such a device and want to use it.
-
-config DVB_B2C2_FLEXCOP_DEBUG
-	bool "Enable debug for the B2C2 FlexCop drivers"
-	depends on DVB_B2C2_FLEXCOP
-	help
-	  Say Y if you want to enable the module option to control debug messages
-	  of all B2C2 FlexCop drivers.

drivers/media/pci/b2c2/Makefile

-b2c2-flexcop-objs = flexcop.o flexcop-fe-tuner.o flexcop-i2c.o \
-	flexcop-sram.o flexcop-eeprom.o flexcop-misc.o flexcop-hw-filter.o
-obj-$(CONFIG_DVB_B2C2_FLEXCOP) += b2c2-flexcop.o
-
 ifneq ($(CONFIG_DVB_B2C2_FLEXCOP_PCI),)
-b2c2-flexcop-objs += flexcop-dma.o
+b2c2-flexcop-pci-objs += flexcop-dma.o
 endif
 
 b2c2-flexcop-pci-objs = flexcop-pci.o
 obj-$(CONFIG_DVB_B2C2_FLEXCOP_PCI) += b2c2-flexcop-pci.o
 
-b2c2-flexcop-usb-objs = flexcop-usb.o
-obj-$(CONFIG_DVB_B2C2_FLEXCOP_USB) += b2c2-flexcop-usb.o
-
-ccflags-y += -Idrivers/media/dvb-core/ -Idrivers/media/dvb-frontends/
+ccflags-y += -Idrivers/media/dvb-core/
+ccflags-y += -Idrivers/media/dvb-frontends/
 ccflags-y += -Idrivers/media/common/tuners/
+ccflags-y += -Idrivers/media/common/b2c2/

drivers/media/usb/Kconfig

@@ -14,5 +14,6 @@ source "drivers/media/usb/dvb-usb-v2/Kconfig"
 source "drivers/media/usb/ttusb-budget/Kconfig"
 source "drivers/media/usb/ttusb-dec/Kconfig"
 source "drivers/media/usb/siano/Kconfig"
+source "drivers/media/usb/b2c2/Kconfig"
 
 endif

drivers/media/usb/Makefile

@@ -3,4 +3,4 @@
 #
 
 # DVB USB-only drivers
-obj-y := ttusb-dec/ ttusb-budget/ dvb-usb/ dvb-usb-v2/ siano/
+obj-y := ttusb-dec/ ttusb-budget/ dvb-usb/ dvb-usb-v2/ siano/ b2c2/

drivers/media/usb/b2c2/Kconfig

+config DVB_B2C2_FLEXCOP_USB
+	tristate "Technisat/B2C2 Air/Sky/Cable2PC USB"
+	help
+	  Support for the Air/Sky/Cable2PC USB1.1 box (DVB/ATSC) by Technisat/B2C2,
+
+	  Say Y if you own such a device and want to use it.

drivers/media/usb/b2c2/Makefile

+b2c2-flexcop-usb-objs = flexcop-usb.o
+obj-$(CONFIG_DVB_B2C2_FLEXCOP_USB) += b2c2-flexcop-usb.o
+
+ccflags-y += -Idrivers/media/dvb-core/
+ccflags-y += -Idrivers/media/dvb-frontends/
+ccflags-y += -Idrivers/media/common/tuners/
+ccflags-y += -Idrivers/media/common/b2c2/