Commit 3841b0a1 authored by Jordan Crouse's avatar Jordan Crouse Committed by Linus Torvalds

[PATCH] APM Screen Blanking fix

- Fix screen blanking on BIOSes that return APM_NOT_ENGAGED when APM enabled
  screen blanking is not turned on.

  The original code only tried to set the state on device 0x100, and then
  0x1FF, and I added 0x101 to the mix too.

- Clean up logic in apm_console_blank().

- Prevent the error message from printing out twice.

Cc: Jordan Crouse <jordan.crouse@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent a7a4ad09
......@@ -1064,22 +1064,23 @@ static int apm_engage_power_management(u_short device, int enable)
static int apm_console_blank(int blank)
{
int error;
int error, i;
u_short state;
static const u_short dev[3] = { 0x100, 0x1FF, 0x101 };
state = blank ? APM_STATE_STANDBY : APM_STATE_READY;
/* Blank the first display device */
error = set_power_state(0x100, state);
if ((error != APM_SUCCESS) && (error != APM_NO_ERROR)) {
/* try to blank them all instead */
error = set_power_state(0x1ff, state);
if ((error != APM_SUCCESS) && (error != APM_NO_ERROR))
/* try to blank device one instead */
error = set_power_state(0x101, state);
}
for (i = 0; i < ARRAY_SIZE(dev); i++) {
error = set_power_state(dev[i], state);
if ((error == APM_SUCCESS) || (error == APM_NO_ERROR))
return 1;
if (error == APM_NOT_ENGAGED) {
if (error == APM_NOT_ENGAGED)
break;
}
if (error == APM_NOT_ENGAGED && state != APM_STATE_READY) {
static int tried;
int eng_error;
if (tried++ == 0) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment