Commit 386d325d authored by Lendacky, Thomas's avatar Lendacky, Thomas Committed by David S. Miller

amd-xgbe: Set DMA mask based on hardware register value

The hardware supplies a value that indicates the DMA range that it
is capable of using. Use this value rather than hard-coding it in
the driver.
Signed-off-by: default avatarTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent ceb8f6be
......@@ -365,6 +365,8 @@
#define MAC_HWF0R_TXCOESEL_WIDTH 1
#define MAC_HWF0R_VLHASH_INDEX 4
#define MAC_HWF0R_VLHASH_WIDTH 1
#define MAC_HWF1R_ADDR64_INDEX 14
#define MAC_HWF1R_ADDR64_WIDTH 2
#define MAC_HWF1R_ADVTHWORD_INDEX 13
#define MAC_HWF1R_ADVTHWORD_WIDTH 1
#define MAC_HWF1R_DBGMEMA_INDEX 19
......
......@@ -519,6 +519,7 @@ void xgbe_get_all_hw_features(struct xgbe_prv_data *pdata)
RXFIFOSIZE);
hw_feat->tx_fifo_size = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R,
TXFIFOSIZE);
hw_feat->dma_width = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R, ADDR64);
hw_feat->dcb = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R, DCBEN);
hw_feat->sph = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R, SPHEN);
hw_feat->tso = XGMAC_GET_BITS(mac_hfr1, MAC_HWF1R, TSOEN);
......@@ -553,6 +554,21 @@ void xgbe_get_all_hw_features(struct xgbe_prv_data *pdata)
break;
}
/* Translate the address width setting into actual number */
switch (hw_feat->dma_width) {
case 0:
hw_feat->dma_width = 32;
break;
case 1:
hw_feat->dma_width = 40;
break;
case 2:
hw_feat->dma_width = 48;
break;
default:
hw_feat->dma_width = 32;
}
/* The Queue, Channel and TC counts are zero based so increment them
* to get the actual number
*/
......
......@@ -374,15 +374,6 @@ static int xgbe_probe(struct platform_device *pdev)
pdata->awcache = XGBE_DMA_SYS_AWCACHE;
}
/* Set the DMA mask */
if (!dev->dma_mask)
dev->dma_mask = &dev->coherent_dma_mask;
ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40));
if (ret) {
dev_err(dev, "dma_set_mask_and_coherent failed\n");
goto err_io;
}
/* Get the device interrupt */
ret = platform_get_irq(pdev, 0);
if (ret < 0) {
......@@ -409,6 +400,16 @@ static int xgbe_probe(struct platform_device *pdev)
/* Set default configuration data */
xgbe_default_config(pdata);
/* Set the DMA mask */
if (!dev->dma_mask)
dev->dma_mask = &dev->coherent_dma_mask;
ret = dma_set_mask_and_coherent(dev,
DMA_BIT_MASK(pdata->hw_feat.dma_width));
if (ret) {
dev_err(dev, "dma_set_mask_and_coherent failed\n");
goto err_io;
}
/* Calculate the number of Tx and Rx rings to be created
* -Tx (DMA) Channels map 1-to-1 to Tx Queues so set
* the number of Tx queues to the number of Tx channels
......
......@@ -632,6 +632,7 @@ struct xgbe_hw_features {
unsigned int rx_fifo_size; /* MTL Receive FIFO Size */
unsigned int tx_fifo_size; /* MTL Transmit FIFO Size */
unsigned int adv_ts_hi; /* Advance Timestamping High Word */
unsigned int dma_width; /* DMA width */
unsigned int dcb; /* DCB Feature */
unsigned int sph; /* Split Header Feature */
unsigned int tso; /* TCP Segmentation Offload */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment